DROID 3 Dual Core Screen

Im on my 3rd DROID in 18 months, few shut downs a day for the last couple months, until now its stuck on the dual core screen. some days it would boot up after an hour or 2. Took it to the verizon store and the tech insisted on wiping it again, now its stuck on the Dual core screen. Tried the Hard reset and no difference.
Do other peoples phones work fine or is this engineered obsolessence.

I have the same issue and would like a solution as well.

Similar Messages

Bionic stuck on Motorola Dual Core Screen fix and replacement return

Recently, as the subject suggests, my phone is stuck at the Motorola Dual Core Screen. It will load this screen after hooking up to the computer or charger, and stay there. During this time, it doesn't charge the battery and the battery becomes drained. I am waiting on a replacement to be delivered, but in the meantime, I think I have figured out how to fix the problem.
If I were to receive the replacement, but fix my current phone without opening the replacement, what is the process of returning/cancelling the replacement that was sent to me??
Thanks,
James

Hello ezdirt,
I'm sorry to hear that you are having issues with your phone not functioning properly. I understand how shocking it can be to have your device frozen on a specific screen. Some time has passed since this issue occured. Are you still having the issue with your device? Have you attempted a soft reset? Please let us know if you need assistance, thanks!
MatthewS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Phone is stuck on "Dual Core" Screen.

My phone is stuck on the "Dual Core" screen. It will not turn on or off. I've tried rebooting, had no luck. Was able to get to a FastBoot screen, but only tells me my phone is locked, then goes back to the "Dual Core" screen again. Help!

Let's get this resolved KJB123! How long have you had your Razr? When did this start happening? I know you've already done the FastBoot, but can you please try doing it while the phone is on the charger? Is there any physical or liquid damage? Please elaborate. Thank You, VanessaS_VZW

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on-

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on…

http://www.verizonwireless.com/support/knowledge-base-26502/
Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment

Power Mac G5 Dual Core Screen Goes Black Randomly But Seems To Still Be Running. I have to Force Quit

I totally just typed way to much info in the title.
In any event, my G5 Dual Core's(late 2005) screen will randomly go black with out notice. Its happend while designing in illistrator and also while browsing google(primarly the use of my comp is graphic design). The fans stay on and it sounds to still be fully running however the screen will not wake up and if i tap the power button it doesnt wake up either. I reset the "PRAM" while booting up, i toggled my screen saver/power saver also so its "never".
I thought the HD was faulty cause it sounds like a light saber at times... I figured the OS was crashing(im ingorant) so I bought a new one and more ram as well. I've installed the HD and am waiting for 10.3 OS to get here in hopes that the new HD and OS will not crash(again that was my educated guess as to what the issue was).
Is it a video card issue? faulty cable you think(VGA to DVI 17" Samsung)?
Thanks so much in advance for any and all feed back along with the patience of a newbie to the forum/community world.
-KRAWSH

Hello,
Have you blown the dust out of it lately, especially the Video card, Power Supply, & RAM areas?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.

HT1338 My macBook pro i5 2.5 dual core screen in blinking, please help me out in this issue. I am using mac os x 10.8.2

I have bought new macbook pro 13.3" i5 2.5 dual core. I was working fine but suddenly when i restarted my macbook after a shutdown its screen started blinking or scattering type. But before shutdown it was working very fine, dont know what happened to it. Please help me out.

Try running the Apple Hardware test to see if it picks anything up:
http://support.apple.com/kb/PH11342
You can also try starting in the safe mode to see if the condition is the same. Booting in this mode takes a long time to start:
http://support.apple.com/kb/HT1455

Hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.help?

hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.

I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8

Intels Dual-Core technology causes Blue-Screen in LabVIEW 7.1 on Windows XP SP2

Dear Ladies and Gentlemen,
last month we've bought a new Notebook with Intel's Dual-Core technology. After installation of LabVIEW 7.1 the system sometimes quit with a blue-screen. The former notebook didn't have this problem.
Is there a fix-pack or service-pack that correct this problem?
Yours
DocDOS aka Timo

DocDOS wrote:
After installation of LabVIEW 7.1 the system sometimes quit with a blue-screen.
Does it blue-screen only when running LabVIEW or does it do that randomly, but it never happened before you installed LabVIEW?
What is the exact message on the blue screen?
LabVIEW Champion . Do more with less code and in less time .

My droid hd is stuck on the duel core screen. I have tried a soft reboot and a hard reboot but nothing is fixing it.

Like the topic says. I have tried all the fixes people have on here. Soft reboot, hard reboot and nothing. I got to the screen that has the choices of if you want to reboot like normal, factory etc but it really doesn't let me do any of those. I can scroll down to them but when I push the up vol to select it goes back to the duel core screen. I really need my phone since my mother is in the hosptal!

hmm.. Well if you have a Way to call Customer Service on another phone.. and you can Talk to a Tear 2 they can Walk you through some Steps to Try and get it going for that is the best way and they can View your account.. if they need to send you another Unit.. as they did for me
Here is the Numbers 1-800-922-0204 And *611 using a Mobil
when you get to option 3 or 4 I use 3 which is the Tech Dept. and they ask what you want to do say you want to talk to a Representative. you may have to wait a Few minutes to get connected as they may be busy but as soon as you do tell them the issue the Tear 1 will try and Diagnose what it is and if the Rep can't he or she will hook you up with a Tear 2 tell the Tear 2 the issue your having and see what the Rep can do for you..
Hopefully get it going but it may be like in my Case they may have to send you a new unit.. they Close at 11:00Pm Mountain Time.. Good Luck.. b33

System crashes when attempting to install 10.6. Keeps asking to restart. Computer is a Dual-Core Intel Xeon processor and 2 GB Memory.

I have tried to install 10.6 and when install is complete it says restart. The computer restarts but keeps coming to a gray screen with a small black box that says to restart. The processor is 2 x 2.66 GHz Dual Core Intel Xeon with 2 GB of memory. This should be more than adequate. Any ideas? Has anyone encountered this before? I had to restore 10.5 from Time Machine.

Your sig line says iMac, but TMK no iMacs were ever made with 2x2.66 GHz processors. Is this a Mac Pro you are installing on? Are you using a retail Snow Leopaard DVD?

HT3964 My MacBook Pro i5 Dual Core has a hardtime waking up when the computer is put to sleep and only when it goes to sleep and has been asleep for a while. The indicator light flashes on and off for a while and then freezes. I've done an SMC reset once.

Does any one have the same problem with their MacBook Pro i5 Intel Dual Core? If the computer goes to sleep (not the screen) and is asleep for a while, when I try to wake it up it doesn't respond. I have to power it downn and restart it and sometimes it takes two or three attempts. Otherwise it works fine. I upgraded the memory to 8 GB. That is the only alteration doen to it. I've performed one SMC restart and now it wakes up but it takes a while and a gray screen shows up. When I insert a DVD it won't start automatically I have to start the application in order to see it. Any suggestions?

http://www.apple.com/support/macbookpro-videoissues/

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

A suggestion for those with freezing dual-core 2.3 G5s (and maybe others)

I'm on my second dual-core 2.3 that's showing the random instability that many others are describing on the boards. To summarize:
- The kernel panic screen usually (but not always) appears.
- Within 10-20 seconds of the crash, fans come on full bore.
- Nothing of substance is recorded in the logs (at least not that I've found).
- Problem occurs with stock RAM as well as 3rd party modules.
- Crashes usually occur soon after a period of steady processor activity (playing large QuickTime movies, transferring files over the network, etc.)
- Problem exists under both 10.4.3 and 10.4.4.
- Apple's hardware test reports everything's fine.
- I've never been able to keep the machines up for longer than 3 days.
So I decided to give something a try that I happened to see in one of the many posts on the topic. In the Energy Saver pane, I've set Processor Performance from Automatic to Highest. And guess what? I've been doing all the same stuff I've always done, and haven't crashed for 6 days!
Just curious if others with similar symptoms have success with this...
Troy

Troy:
I've been using my PM dual core 2.3 GHz hard since November with nary a problem. I usually keep the Energy option at Automatic, unless I'm going to be running heavy-CPU database processes, when I set the CPU to Highest.
And I do watch movies fairly often on the 2.3.
I always use Software Update for OS and Security updates. I've been updating my Macs for years this way, and haven't seen a kernel panic since OS X 1.0. Permissions repair is always run before and after updates.
Cocktail and DiskWarrior are run periodically for maintenance. I probably run Cocktail every week or so, and DiskWarrior every few weeks just as preventive measures.
Knock on wood, this has been a very stable computer.

MSI P35 NEO & dual core center problem

hi, i have a problem with my motherboard msi, Bios 1.2 and the dual core center 2.0.0.8 ,since days ago, the msi dual core center 2.0.0.8 so many times shows fan speeds alerts false alarms from the cpe temp, for that reason, i upgraded the appl to 2.0.1.6 ( the last),i set the oc level to 25% like with the older version, but time later the pc crash and put a black crash screen and it dont let me to overclock my cpu , i get back to 2.0.0.8 but the fan alarm dont stop, and i dont know if the newer version fix this problem
any help?
sys specs
msi p35 neo bios 1.2
core 2 quad q6600
2 gb value ram
psu duck

right, but i like to use msi dual core center, because i dont like to have the pc overclocked all the time, anyother suggestion for this?
thanks for the reply

Jagged wavy lines edge of CRT display with Dual Core Mac mini

My friend recently bought a Dual Core Intel Mac mini and when hooking it up to a 19 inch MAG monitor there are often wavy lines on the edges of the screen. They go up and down both sides, are jagged, and also are not static but moving quickly. Sometimes it seems to behave normally while other times if it doesn't show up on the boot screen it will show up after a little bit of use.
At first it seems that the more stuff I opened the worse it got, so I thought it could be the shared video RAM as he did not upgrade from the original 512 , but that should only slow the computer down anyway. Now I think rather than the RAM I think it could be related to the Apple DVI to VGA adapter, resloution/refresh rate, or just bad video hardware. I can't rule out that it just won't play nice with the majority of CRT monitors out there either. Sometimes changing the resolution/refresh rate helps and other time it doesn't. From what I heard my friend experienced wavy lines somewhat on his own monitor but I don't think it did it when using a DVI to HDMI cable to his Sony 50 LCD (and I didn't see it when hooking it up to mine either).
If anyone has any idea what could be going on I would greatly appreciate it. The reason it is so important is that my friend decided that the Mac mini was kind of an impulse buy and didn't need his iBook and another computer for his TV so he is going to sell it to my brother who is in need of a computer. So I don't want him to get into something that will give him problems right away.
Thanks in advance,
Robert

So is the MAG monitor your brother's monitor? That wasn't clear.
What you are seeing will most likely be limited to the MAG monitor. The MAG is experiencing some kind of noise coupling in to horizontal sync, likely from it's own power supply. You are correct that this will be related to the sync rate. Changing the vertical refresh to something higher, like 85 Hz or higher if available, might help to mask the noise. Also, power supply loading will affect how the noise manifests, so you weren't imagining when you thought that opening more applications made it worse. It didn't have anything to do with the mini but rather the different average picture level on the screen was changing the monitor's power supply loading and hence changing the beat frequency between hsync and the power supply's switching frequency.
I think it is safe to say most of what you see is bound to the monitor and not the mini. Furthermore, if you are stuck with this monitor, you can probably lessen the appearance of the noise by mucking with the refresh rate out of the mini.

DROID 3 Dual Core Screen

Similar Messages

Maybe you are looking for