Droid 3 - No 1080p Camera/Video Option

When viewing the resolution settings in the camera and camcorder app, there is no option for 1080p available. I have double-check the menu several times, but 720 is the highest resolution offered. 
I have tried changing the storage setting from SD card to internal, but the 1080p option is still not there. I have also tried multiple SD cards and resetting the camera applications, but the option is not there. 
Has anyone else experienced this?

Oh... Boy are my checks red..  , sorry I just realized what you was saying, did not catch that the poster was you...    One of those dumbfounded moment...  Sorry, my oversite..
Now as Vignette that is strange one because I have a resolution option...  But I just caught on you are tying to do video so that isnt going to work for you either because that is a photo app...  Thats what happes when you putting in to many hours...
Well Im drawing a blank and ran out of ideals, hope you figure this one out,,,,   Also dont exclude a hard reset if all else fails..  Good Luck.. Sorry couldnt be more help.

Similar Messages

  • No video option in the camera app in iOS 7

    On my iphone 4s, the video option seems to have vanished in the camera app along the bottom of the screen. I just get photo, square, and pano. Anyone know why video disappeared?

    I am having the same problem.  I did manage to get it to show up again by opening an App that has video.  I used the FaceTime app and called someone and then went back to the camera app and the video option showed up.  It also worked using SlowPro or some other video apps. 
    I'm not sure why the video option keeps disappearing, but at least there is a way to temporarily get it back.

  • Camera app only shows still camera option. Video option is gone

    The iphone 4 camera app intermittently would not open. Now the video option does not show at all. Still takes photos but no way to get to video mode.
    And the answer is?
    John

    And the answer is?
    Like most other problems, do the basic troubleshooting steps described in the User Guide:
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure that needs warranty service from Apple.
    If your phone has EVER been jailbroken, all bets are off...
    Message was edited by: modular747

  • Video option of the camera is disabled

    After upgrading my iPad mini system to IOS 7.0.2 video option of the camera is disabled. Please help.

    Thank you for the response.
    Nothing happens when I try to switch Video and Square selectors in Camera mode. They don't become highlighted as well. Please see at the picture.

  • I cannot activate the video option on the camera

    I am unable to activate the video option with the camera. is there a setting I am missing?

    You need to swipe to video and not tap on video.
    open your camera app swipe over to video, the video icon will turn yellow.

  • Can't find the video option on the camera

    I just updated to iOS 8 and I can't find the video option on my camera, I have a iPhone 5s. I have looked every where even turn off and on the phone and doesn't apear. Any help?

    It should be right there were it was in 7. Try resetting the phone.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.

  • We need slow motion in video option camera plz

    Is it possible capture slow motion video option like iPhone 5s ?? cant find an app support that . we need it in video options in camera app  

    There do appear to be applications that fill this gap:
    https://play.google.com/store/apps/details?id=com.jqrapps.slowmotionvideo
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I am trying to determine the new project preset for multi-camera video shot as follows:  3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080).  Film is from a wedding, DV contain

    I am trying to determine the new project preset for a multi-camera video shot as follows:  3 Canon camcorders,
    Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
    b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
    additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception. 
    Film is from a wedding, DV contains main footage so I assume it will need to be the base.  I am planning to use the preset for DV-Widescreen.  Is there a better option?  I'm concerned about playback as the three appear to have different PAR.  I'm using Premiere Elements 10 on W8.
    Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
    (And no I won't be doing this again for a wedding that I shoot.)

    VDRAVES
    Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
    Before
    After
    It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
    And, after the Scale increase, you can always click on the screen and move the image around a bit
    (without overdoing it to get black borders again).
    After and an adjust
    Please let us know if you are OK with the information above.
    Thank you.
    ATR

  • Home Video Option Missing in Ipad Mini

    Hi,
    So I've had my ipad mini for almost 2 years and it has worked brilliantly until lately.
    I've been uploading videos via itunes to my ipad and it shows up under Videos -> Home Videos.
    So, most of the time I can just add new videos in and have no issues but lately I keep having this issue.
    I will drag some videos from itunes into ipad but when i pop into my ipad section, it shows that the videos are not sync'ed in.
    Then i will click sync and the next thing i know is, the memory bar at the bottom would indicate  e.g. from initially 9GB of free space to 20GB of free space.
    When I go to my physical ipad to access the videos, the "Home Video" option isn't even there. But the videos on itunes, on the ipad section still indicates they are there.
    I've tried sync'ing again.
    I've tried deleting all the videos and drag them back in and sync'ing but it doesn't work. The "Home Video" just doesn't come back.
    My only solution so far has been to restore Ipad. Which literally erases all my data and sets it back to a completely new Ipad.
    Depending on time and date of my backup sometimes restoring to backup date may or may not work.
    Any idea what's the problem and how i can resolve this?
    Help is very, very much appreciated.
    Thank you.

    Hi Alfred, very curious update.
    As I have said I have some home movies stored under Movies >Home Videos and yesterday I was talking with my duaghter-in-law about whether it would be possible to share this with her Ipad but couldn't come up with anyway to do that. I looked at Dropbox and Instashare but they don't, as far as I can see, allow me to access my home videos, they only seem to work with camera roll and purchased movies.
    Anyway, this morning I was messing about with the Ipad Movies>Home Videos page nd by chance I touched the heading where my original 4 videos are displayed and suddenly the USA video appeared (nearly fell off my chair) and it worked OK. The date is shown as 23rd March 2014.
    Back stepped and tried it a couple of times and it was OK. It would seem that the Ipad has stored the original 4 videos on one page and the USA one on another. The original 4 don't show any video content i.e the opening screen just a grayed box with a move film icon and the title whereas the USA video on the second page shows the opening screen shot.
    It isn't possible to drag from one page to another I have to click the Home Videos title at the top of the page to move from one set to another.
    It's great news I have my video after all but any clues as to what's happening? I would have thought it would fill the first page before going to a second. Is the clue perhaps in the way one set don't have the opening screen and the USA one does?
    Also, any suggestions as to how I can share these with my daughter-in-law?

  • Video option is gone.

    Hi I have a iphone 5s. When I go into my camera the option of video and slow motion is gone. I tried resetting it yesterday and I did come back up but I noticed today it's gone again. I reset it again and now it's not showing up. Can this be fixed??? is there another way this can stay on the phone permanently?

    And the answer is?
    Like most other problems, do the basic troubleshooting steps described in the User Guide:
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure that needs warranty service from Apple.
    If your phone has EVER been jailbroken, all bets are off...
    Message was edited by: modular747

  • When will FCPX be able to import Panasonic FZ-150 1080p/60 video?

    When will FCPX be able to import Panasonic FZ-150 1080p/60 video?
    The only format supported now is interlaced 1080i/30.
    Are there any third-party options of getting 1080p/60 into FCPX now?

    Thank you Tom and Hugh. Yes it's a AVCHD DSLR.
    If I could ask one more question.
    What would pros and cons be between ClipWrap and the free converters?
    Obviously, for me the most important would be the resulting image quality.
    Andre

  • Audio and Video option missing from Export Quicktime Movie Include

    Today as I was exporting a clip, I noticed that the Audio and Video option was missing from the Include drop down. I only have the options of Left, Center, Right.
    I highlight the sequence, control E (or File>Export>Quicktime Movie) and the Save window comes up. The Settings drop down is the same, the Markers: drop down is the same, but the Include: has the options of Left, Center and Right. I thought the Video and Audio dropdowns were always there. I hate to admit it, but I have not paid attention to them in a while. Getting old I guess.
    Sequence settings is 720x480 NTSC DV (3:2)
    NTSC - CCIR 601 / DV (720x480)
    Lower (Even)
    29.97
    QT Video Settings
    DV/DVCPRO - NTSC
    100%
    Audio
    48 kHz
    16-bit
    Channel Grouped
    Did I miss something?
    Thanks

    Thanks, forgot about that.
    For what ever reason it started working correctly a couple of hours later, after I started an SD project. The video came out fine
    I had been trying out a couple new applications, so maybe one was causing it. I will see if it happens in the future.
    Jim

  • Video option is not available in iphone 5 after updating to 6.1.4

    I am not able to select the video option in camera mode. There is no sliding button from photo to video to choose on the right bottom corner of the screen.

    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

  • How do you convert camera videos to iPad

    How do you convert camera videos to Ipad2?

    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

  • IPhone Camera - Video Camera

    iPhone Camera - Video Camera option
    Who else thinks Apple should make the iPhone capable of recording video?

    I do but it is not available yet.
    Leave word here:
    http://www.apple.com/feedback/iphone.html

Maybe you are looking for

  • Mail with PDF attachments bounce back??

    I often send time-sensitive PDFs that need to be reviewed quickly so it ***** to learn a couple of days later that the delivery failed! Is there a way that mail can inform that the email DID arrive successfully? Or is there a way to reduce the amount

  • Query in Tool Bar Area Searching option.

    Hi All, There is a tool bar Searching iView with us.But when any user searches through it, the search option is working fine.But the results shows files with open folder and details option (as we do not want some user go inside details option and cha

  • SAP FICO Tables for the ECC 6.0-Needed

    Hello Gurus, Please send me the ECC 6.0 master and Transaction data Tables. Below is link shared by Murukan Arunachalam which is quite useful, but it belongs to lower version  of ECC 6.0, deleted I am looking for updated version. Thanks a lot.

  • Daylight Savings Time -2007

    In 2007 when the US changes the start/end dates for daylight savings time, will Apple patch 10.4.x, 10.3.x etc?

  • Unable to start replicat due to invalid username/password

    below is my parameter: REPLICAT MSREP SOURCEDEFS /u01/app/oracle/gg/dirdef/emp.def USERID gg_user, PASSWORD welcome1 MAP hrschema.emp, TARGET gg_user.emp; when I start the replicat, I got an error invalid username/password. If I log into SQLPLUS with