Droid bionic's touch screen doesn't work properly with firefox have to use opera

once on Firefox, I have to tap on the screen links many times until it recognizes the touch. the screen will zoom in and out only. scrolling is slow but it functions. it's the touch that doesn't work

For one thing, AT&T does not handle any iPhone repairs or exchanges under warranty so I'm not sure why this Apple rep told you to take the iPhone to an AT&T store regarding a potential warranty claim with the iPhone.
What is going on? Is a $500 phone so sensitive that you have to keep it on a desk top like a computer to use it?
No it is not. I've dropped my iPhone on concrete more than once without being in a case and one time included a bounce and skid across the concrete causing scratches on the back of the case. No problems whatsoever and I've dropped it a few times since I began using a case with no resulting problems either.
http://www.youtube.com/watch?v=czCCavcnNd8
But damage can occur depending on how the iPhone lands just as with any other cell phone.
Since this is a potential warranty claim, I suggest making an appointment at an Apple Store if there is one nearby or call AppleCare (800) 694-7466 and handle this over the phone.

Similar Messages

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • I cant open apps on my iPhone 4 the touch screen doesn't work.  I have restored my phone and still nothing works.

    I can't open apps on my iPhone.  The touch screen doesn't work.  I have restored it already but it still won't work.  What can I do.

    If the touch screen is not having any response then you probably have a hardware failure. Take your phone to an Apple Store or authorised service provider to have it checked.

  • Touch screen doesn't work!!!

    I got my TP two weeks ago, played with it for a day and a half then, in the middle of surfing the web, the touch screen doesn't work. I've contacted HP support and sent my device in for repair. I got it back two days ago (12/30/2011), worked totally fine for 20 mins and the touch screen didn't work again. I've tried using WebOS Doctor 3.0, 3.0.2, 3.0.4 nothing works.
    I've tried rebooting it multiple times, still doesn't work. Frustrating I must say....
    Any suggestions?
    Post relates to: HP TouchPad (WiFi)

    Gotcha, so I just want to make sure I'm following you correctly. At this point the screen is probably all black from the auto-turn-off thing. You hit the power button, and the little yellow lock icon appears on the bottom. But when you try to drag the little lock icon, nothing happens. Does that describe what's happening to you?

  • I have iPhone 5 and the touch screen doesn't work

    I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
    <Re-Titled By Host>

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
    No data is loss doing a reset.

  • I have an iPod touch 2nd generation and my touch screen doesn't work, at all. What should I do?

    I have an iPod touch 2nd generation and my touch screen doesn't work, at all. What should I do?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. I say not worth it for a 2G
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more. Again, likely not worth it for a 2G
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

    I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

    Have you tried a reset To see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • TS3992 How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but touch screen doesn't work to unlock the phone or select any

    How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but the touch screen doesn't work to unlock the phone or select anything. We want to save/transfer pictures, contacts, and music to the replacement phone.

    Try backing it up to your computer with iTunes.  Connect it to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now.  Also go to File>Devices>Transfer Purchases to transfer you apps and other purchased media to your iTunes library.

  • Built in microphone and touch screen doesn't work

    Hi
    I have problems with two things, my built in microphone doesn't record anything, also I tried all suggested steps of HP support.
    Windows recognizes the microphone.
    The touch screen doesn't work the touch part, but the display is working good.
    Also i tried to update Drivers, but looks like Windows does not recognized the touch screen, when I going to Control Panel and search for touch screen stuff, I do not see anything.
    I hope you can help me to fix this.
    Thank you.

    Hi @ldiego008 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY TouchSmart m7 Notebook and the microphone and the Touchscreen not working correctly. If you follow this document it will show you how to correct this issue on the Touchscreen.
    Try following  this document document on Resolving Microphone and Line-in issues for Windows 8.1.
    Here is something else that might help if you need it. If you go to the Device Manager (Audio inputs and outputs)and uninstall it from there restart the computer it should automatically reinstall it for you. This link shows you the Device Manager Screen shots that might help.
    Hope this helps with both issues.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Downloaded iOS 8.0.2 now I have no service and Touch ID doesn't work. Anybody else have this problem? I have tried rebooting and also took out SIM card and nothing has worked

    rreally need some help with this For the iPhone 6. Downloaded iOS 8.0.2 now I have no service and Touch ID doesn't work. Anybody else have this problem? I have tried rebooting and also took out SIM card and nothing has worked

    No. I have no problems what so ever since my update to iOS 8.0.2.
    Have you tried to do a restore ?

  • Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and  MplayerX and etc

    I face to this problem since new OS, Yosemite has installed on my mac book
    some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and  MplayerX and etc
    For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard  or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
    Please help me
    tq

    Same thing here with MPlayerX (annoying)

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • Firefox from version 3.6 to 11 beta doesn't work properly with gmail

    Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Google News doesn't work properly with Safari 5.1.4

    Has anyone else noticed that Google News doesn't work properly with Safari 5.1.4?

    Thank you for your response.  The more I use 5.1.4 the more problems I am seeing.  There are problems with images and layout.  I would like to back up to 5.1.3 but the system won't let me. At present I a looking for a solution, or I might just start using Firefox.

  • Why isn't the scroll wheel working properly with Firefox 4?

    I have a new Windows 7 PC at work with Firefox 4 on it. The scroll wheel on my mouse is not working right. It will work if I use Internet Explorer but I have trouble getting it to work with Firefox. Usually what I have to do is click the wheel to get that mode of scrolling where you move the mouse up and down to scroll the screen and that will work. And then when I click the wheel again to get out of that mode, my scroll wheel will work as expected. But I don't want to have to do that all the time. And sometimes that trick doesn't work. The scroll wheel is working fine with MS Excel and Lotus Notes and Internet Explorer, etc, so it seems to be something the new Firefox has an issue with.

    I fixed my problem! I was messing around in msconfig to turn off Lync from my Startup list and noticed something called Mouse Suite 98 was in my Startup. I did a quick google check and learned I could remove it without doing any harm. And voila! My scrollwheel is working properly with Firefox, finally! Hope this helps someone out there.

Maybe you are looking for