Droid maxx will not power on. Tried a reboot and wouldn't let me

My droid maxx shut down on its own yesterday and will not power on. I tried a reboot, got to the screen tried every option but wouldn't let me do anything.

    Oh no buffy9782002! Let's find out what's going on. Do you know if you were using certain function or application when this happened? Is there any physical/liquid damage? Please leave on charger for 30 minutes, the try turning on again.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • Wifi on droid maxx will not turn on

    Wifi on droid maxx will not turn on
    Not at home, work or anywhere else

        That's no good, jeanne1215. Let's get it connecting again. What happens when you try to turn the WiFi on? Did this start after installing a new application or update?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • My droid turbo will not power on

    Can anyone help me? My droid turbo will not power on even though it has a full charge

    I'll add if what Tikibar1 says does not get it going plug your charger into the Turbo and try powering it on if you still don't get a response and your under the 14 return I'd return it for a new one as you may have a bad power switch

  • Ever since I updated my iPod software my iPod will not connect to the app store and won't let me download anything. help

    ever since I updated my iPod software my iPod will not connect to the app store and won't let me download anything. help

    Hook it up to your computer and open itunes. try to download hte apps via your computer. Every time you update hte software you have to reagree to the itunes terms of service. Sometimes it's hard to get it to come up on the device, but is easier on a computer.

  • Droid Razr will not power on after new update.

    I have the Droid Razr and attempted to download the new update this morning.  My phone has powered down and will not power back on.  I have done the forced re-start several times & nothing.  The phone starts to power-up and turns right back off.  My phone was fully charged before I attempted to install the update.

    Try holding power + vol up and vol down keys simultaneously (all at the same time).  It should bring you to the bootloader menu, use volume down to go to recovery, press volume up to select it.  An android lying on his back will appear, press the volume up and down keys at the same time, hold for about 5 seconds and release.  Scroll down to wipe data factory reset, use the power button to select it, it will go back to the main menu, scroll down to wipe cache, back to main menu and restart device.  If that doesn't work, try Verizon support on the phone and/or bring it in to your local Verizon store.

  • Droid MAXX will not connect to wifi

    Was using my MAXX over the weekend on my home wi fi. Browser froze, I closed and attempted to re open. No wi fi connection. Since then, I cannot connect to my home wi fi, my friend's home wi fi, and a relative's home wi fi. The signals will sporadically show up on my wi fi screen as available. When I attempt to connect, it will say 'connecting' for 1-2 seconds, then not connect. I have cleared all saved wi fi signals and re-entered passwords. I have done several power off/on cycles. I have removed SIM card and powered off/on. Phone is not in airplane mode, mobile hot spot is not turned on. Nothing seems to work. Right now I am completely dependent on Verizon data usage.

    I as many of you have been a victim of the KitKat update and its Wifi issues.  I will not spend time sharing my extreme disgust with verizon for not giving me the option not to update as when Jellybean was pushed out, my Moto MAXX Phone was wrecked with so many issues.Thanks to this forum you see you are not alone. I have spoken with 4 different verizon techs and two motorola techs and find it criminal that they were all seemingly unaware of this issue. After 4 hours of calls  spaninng 3 days and frustration,Although everyone in support was sorry and nice, no one could fix the problem.  I did get lucky with a supervisor that suggested that I try putting the phone into airplane mode for a minute and the switch back. Sure enough it then finds and connects to my router and wifi. the only problem is that it only lasts a few hours then drops the WiFI, but at least until a fix is sent to us, I can use my WiFi. I understand this is also happening to Samsung phones as well. They have tried all the time wasting tricks of sim card refresh, cache cleaning etc. i am glad that i did not do a reset. VERIZON, PLEASE SUPPORT YOUR CUSTOMERS AND ACKNOWLEDGE THAT THERE IS A PROBLEM< INFORM YOUR TECHNICIANS AND SEND AN EMAIL TO US PROMISING TO WORK AS A TEAM TO RESOLVE THIS.ASAP . ENOUGH IS ENOUGH!

  • Droid Maxx will not make or receive calls with a full signal

    My Droid Maxx has been doing this for the last week or two. It seems to only happen at night though. I have a full 4g LTE signal, however it changes from grey to blue constantly. I am able to text, search the web, or plain just do anything else...other than call out or receive a phone call.
    When I try and call it just says dialing or retrying.
    Has anyone else had this same issue? I have searched my phone for any time settings that may be keeping me from making or receiving calls during certain hours since this only happens at night when I am at work but have not found anything.

    I received a replacement phone and I have duplicated the problem on it. The call problems occur only when Wifi is turned on AND this began AFTER the KitKat release was installed on the phone(s). I noticed a similar complaint in the forum and his timeline suggests that he might be having the same problem. How can I get this investigated?
    Thanks
    >>Personal information removed to comply with the Verizon Wireless Terms of Service<<
    Message was edited by: Verizon Moderator

  • The wifi on my Droid Maxx Will NOT turn on how can i fix this.(it is not on airplane mode)

    How can i make my wifi turn on my droid maxx

        Oh no, ThunderHumper. Let's get your WiFi working smooth. What happens when you go to Settings and turn on WiFi? Does it show turned on but not recognize any WiFi connections? Try turning your phone off then back on to refresh it's services.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • MacBook Pro will not power up beyond gray screen and spinning circle.

    Hi all,
    Everything was fine earlier, but later went to turn on my MacBook Pro (OS X 10.5.6) and here's what happened:
    - Apple start up "gong" sounds
    - Screen lights up gray with dark gray Apple logo in center
    - 12 segment gray circle rotates
    This goes on for about a minute or so and never advance to beyond to blue screen, login window, etc., the screen just goes black and shuts down after that. I since tried powering it up about a dozen times and the same sequence of events happen with no complete start up.
    Battery is fully charged and 110VAC power supply is plugged in.
    Anyone have any ideas that might help? Please let me know if I didn't provide enough info.
    Thanks in advance.
    Mac

    You'll have to do the following if possible:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • ITunes will not start, already tried to uninstall and reinstall

    I cannot get iTunes to launch. I click on iTunes and it wont come up at all. It doesn't even appear in the task manager. I have tried uninstalling it and reinstalling and it does the same thing. I've looked at things in the apple troubleshooting to fix it but I can't fix it. Any help will be greatly appreciated.

    I hope someone chimes in to help. I'm having the exact same problem. Won't launch - have, as you, tried to repair via iTunes 9.1. Uninstalled/reinstalled using option on iTunes 9.1 download. Uninstalled from Windows Control Panel, download and run 9.1 download. All don't help - results always same: won't launch.

  • Droid Maxx will not connect to wifi, slide the button to "on" and button automatically switches back to "off"

    Yesterday my Maxx stopped allowing me to turn on the WiFi.
    If I turn it on in the settings, it automatically slides back to off (in less than 5 seconds), never connects.
    In advanced settings under WiFi, mac address is unavailable (don't understand why no mac address is listed here), so is IP address (this one I understand because it isn't connected).
    troubleshooting steps taken so far:
    1.  power cycled - changed nothing
    2.  made sure no 3rd party apps causing issues (uninstalled or stopped) - changed nothing
    3.  powered up in safe mode - changed nothing
    4.  ran a factory reset/restore - changed nothing
    Note:  The phone hasn't been recently updated with a system update and nothing as been installed in over a week before issues
    Now what?

        Thanks for your efforts, jcma323. I'm going to send you a Direct Message. We'll get to the bottom of this.
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • Droid OS will not power up

    Screen Reads:
    Bootloader
    2c.7c
    Battery OK
    OK to Program
    Transfer Mode:
    USB/Connect USB Data Cable
    My 9 month old daughter was holding my phone while talking to her grandfather...she slobbered on it. Is there any way to reset the phone from this prompt?
    Your help is appreciated... Looking to renew plan and get the Bionic on or around Nov. 25th...proved there is a BOGO offer for the holdiays. If anyone has any news on this as well, your help is greatly appreciated.

    Since pressing the D-Pad is needed to get you to that menu I would try pressing your finger around the D-Pad and then try rebooting without touching any buttons but power and if this works the d-Pad is sticking..
    If there is any stickness to D-Pad try taking some swobs and remove any stickiness..
    This sometimes work but not guarenteed....  Good Luck.

  • Droid X Will Not Power Off

    Moved for greater exposure

    "SEARCH" is your friend on this forum ..
    http://community.vzw.com/t5/DROID-X-by-Motorola/Droid-X-Turning-itself-on/td-p/625852/highlight/false
    welcome.  

  • My droid maxx will not find any signal nor turn on wifi.

    I usually have 4G coverage everywhere but as of today i have no signal at all.  It stops searching for service too.  My wifi button is a darker tint than the airplane mode and bluetooth.  It won't turn on at all.  My girlfriend's phone is under my account and she has no signal problems at all. 

    I had the same problem. I restored, that didn't fix it. I reset all network settings, that didn't work. I finally went into the apple store and they told me I had to pay $199 for a replacement 4S. I'm not going to pay for that when its obviously a hardware problem. Congradulations Apple, you just lost a dedicated customer. If Steve Jobs was still here this wouldn't be happening.

  • After successful installation of iTunes 10.6.1, iTunes will not open.  Tried complete uninstall and reinstall, still not working.  Cannot sync iPad or access iTunes at all.  Any suggestions?

    After successfully installing the iTunes upgrade to 10.6.1, Now I cannot open and access itunes.  I have tried a complete uninstall and reinstall and it is still not working. I have looked through many support communities for answers.  I added an iPad 2 almost a year ago and all was fine until my upgrade to the "cloud services" and upgrade to new version.  I have been without iTunes on my PC for a month.  Any suggestions on how to resolve this issue?

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

Maybe you are looking for

  • MB5B problem

    i have a problem with stock on posting date. when i run a program to get information for the last month 2 times, it shows me different opening quantity. what the problem with this report when i run on day time.

  • Last Line Item in Report Repeating on Next Page

    The last line of data of every page is also the first line on the next page. I have not encountered this before and I cannot see how it is happening or how to correct it. The report has three groups and the 3rd group has 3 details lines. It is the 2n

  • HT2487 i cant delete the extra windows I have up

    when you are able to have a few extra windows up in the preview area - how do you delete it- or them. If I am wording this wrong I mean to ask.. when you swirl your hand and can view all the windows you may have up I dont see a choice to delete them

  • Min Mx planning report gives an error when run with RE-Stock yes.

    Hi All, We are going to implement Min Max planning for the first time.However when we test it at org level with Re-Stock parameter YES it gave an error. what are the additional setups need to be done for it? It works fine when running with re stock n

  • How do I test if witchable graphics works?

    I bought a dv6-6135dx in the store and am going to return it and have ordered the same computer with the core i7 processor through HP.  I still have the AMD model and am wondering how I test to see if the switchable graphics is working as several pos