Droid no longer connecting to MacB PRO

I have Motorola Droid2 running version 2.3.3.
I can no longer connect to my MacB Pro 10.5.8 to transfer pictures.
The phone is discoverable.
I can see the phone on the MAC and the phone can also see the MAC but the state shows "Pairing".
I have tried to "setup" the device again, via Bluetooth Assistance. It discovers it, click CONTINUE, I see message
that it is getting additional information, then a message that it is COMPLETE but it never connects.
I have used from the Droid, Bluetooth File Transfer app, but when I try to use it now, it completes Searching for a Service ok
but fails to connect.
From the MAC I can no longer browse to the Droid.
This was working but has now stopped ?
Not aware of any changes that would have caused this.
Has anyone seen anything similar ?
Thanks

Dear MeepNoToes,
Thanks for providing us with additonal information. I have verified this is not a known issues with the Nokia Lumia 822. Allow us to get to the bottom of your wifi connection. Have you tried removing all third party applications and then testing the device? Also, since this did start after a sofware update, I would suggest to back up all of your information and then do a hard reset. To learn how to do a hard reset on your phone click http://vz.to/15MnUFD If you are still experiencing difficulities after the hard reset, please feel free to reach out to us for further assistance. Have a great day!
Thank You,
MichelleS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Similar Messages

Canon camera no longer connects to Macbook Pro after 10.4.7 update

Has anybody gotten word from Apple on this issue yet? My Rebel XT/350D stopped connecting to my MBP after the latest software update. It has stopped working with iPhoto, Image Capture and Capture ONE. If I put the CF card in a USB reader, it is recognized (occasionally) as a removable disk.
What gives?

CZ:
Did you update the system via the Software Update? If so then download the 10.4.7 COMBO updater and run it. There are some files it's reported, that are left off the incremental updater and the combo one will fix some of the problems that causes. Not sure your problem is one of them but it's work a try. Don't forget to repair disk permissions afterward.
Do you Twango?

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

My Macbook Pro will no longer connect to my tv via HDMI

Well basically it is in the title, my Macbook Pro will no longer connect to my tv via HDMI.
I have been using this cable for a long time and works perfectly.
earlier today i used it to connect my mac up to my parents 4k tv, it worked fine, did what i wanted to do.
but now when I've come to connect it up to my tv it recognises there is something connected but it won't display anything
it just says no signal on my tv
im not sure whether my mac has changed some settings on its own to run on 4k but now to high to run on my 1080p tv
pretty annoying so any ideas id be very grateful.
I've already tried
restarting my mac
turning tv on and off
different hdmi ports
thank you

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Try another cable

My Mac Book Pro suddenly will no longer connect to the Internet at my house. Help?

My Mac Book Pro suddenly will no longer connect to the Internet at my house. My son's MacBook connects just fine. My MacPro connects at work, at Starbucks, etc. just fine, but not at my house. My son's however has no problem whatsoever. I assume that since his computer connects that the router and modem is not the problem. And since my computer connects everywhere but here . . . . it is not a hardware issue. When directly connecting my MacBook Pro to the modem or router the problem was the same. . . no connection. Help?

From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

Since the new Mevericks update my Air can no longer connect to a shared Itunes lib on Macbook Pro

Hi,
I have two mac laptops at home. My pro and my air. I have it setup so that I stream all my media from my pro to my air.
I updated my pro to the newest Mavericks version. Since that update I can no longer connect to my library on my pro via my air.
Please note that this problem here is with the mac book pro! I updated my air last night and i could still stream.
All I get is the usual "loading library" (on my air's itunes) but it never connects.
Other than restarting the application (on both computers) and restarting (both computers) what else can I do?
Are other people having the same problem??

Hi Bryan,
Thanks for your input.
Unfortunately I cannot get any of the OS X browsers I have tried to get beyond the accepting the site's certificate. All just stall waiting on the Outlook Web Access site. Safari 3.1, Camino, Flock, Firefox (2.0.0.12 and 3 beta 4), Netscape (7.1 and 9), Microsoft's Internet Explorer (thinking that might be more integrated with its Outlook Web Access package).
I have even deleted the certificates from my Keychain (for Safari) or within the other browsers' preferences.
Last night I even re-applied the 10.4.11 combo updater and then checked for software updates to confirm my system was up to date, but again without success when attempting to reach the Outlook Web Access site.
Thanks anyway.
Ted

Mac Pro no longer connects to network via ethernet.

Since coing back from Thanksgiving break and my Mac Pro 1,1 will no longer connect to my router through via ethernet. This means I can neither connect to internet nor connect to devices like my laptop and Apple TV. Strangely, I can still connect to my Mac Pro from these devices to share screen, play audio/video through iTunes, etc. In Network Settings, I still have a green dot, and I still get an IP address assigned (though I usually use a fixed IP). If I go into my router (Netgear WNDR4000), the router tells me that the Mac Pro 1,1 is connected to the network.
I already have tried the following solutions:
· Restarting router, modem, and computer
· Making a new location in Network Settings
· Trying different ethernet ports
Please Help!

Your local LAN runs through your router.
All your ethernet ports, and your modem and router, should be behind and filtered from excess current. That means a UPS generally. And run input line thru UPS (coax) first, then run RJ45 back through UPS again (there can still be excess surge or current on the line).
Modems and routers can be compromised by surge outage or storm. So can ethernet ports.
You have two ethernet ports and you tried with both also.
What you did not do that I would have added is SMC Reset / Reset NVRAM/PRAM.
This is what I have had for the last year, very nice and stronger signals thruout the house.
http://www.amazon.com/NETGEAR-Wireless-Router-Gigabit-R6200/dp/B008HO9DIG/

My iphone 4s will no longer connect to wifi if it has a password it keeps telling me incorrect password, my mac book pro connects and the new iphone 5, i have reset it reset factory setting tried to manually input the connection with no luck

my iphone 4s will no longer connect to internet via wifi if it is password protected. i have tried to restart the phone reset the phone reset factory settings tried from a distance nothing works. i have connected my mac book and iphone 5 with the same password successfuly but the 4s wont connect. i have gone back to other knowen connections and since resetting the factory settings it will no longer connect there either what should i do??

Settings > General > Reset > Reset Network Connections
Try again.

Why cannot I no longer connect my Macbook (not air og pro) to the TV?

I have a Macbook (medio 2010) which I can no longer connect to my TV. I have the two connected with a DVI to HDMI and in the beginning I had no problem using this - it all happened automatically.
Now it just says I need to check the connection and in settings I can no longer choose en external display/mirroring.
I have updated my software to Mountain Lion 10.8.3 and the weird thing is I got it to work one time the other day. When I connect the two the screen on the computer turns burn (it reacts), but nothing is transmitted to the TV.
What can I do?
I have tried connecting the cables in different sequences, turning mac/TV off and back on, updated software, but nothing seems to help. I am desperate - please someone help me.

Have you checked the Sound Preferences under the System Preferences and set it to USB speaker for the sound output? Sometimes it can change on its own or after and update of an App or the OS?

My Apple bluetooth keyboard no longer connects to my Macbook Pro

My wireless keyboard no longer connects to my Macbook using Bluetooth. I've put in fresh batteries, checked the on/off switch, and attempted to connected using system dialog. Also tried turning Bluetooth off and on. Nothing works. Wireless trackpad works fine.

You may need a wired keyboard to carry out some of these steps. It's a good idea to keep a cheap wired keyboard and mouse or trackball as backups for a desktop Mac anyway, because Bluetooth isn't completely reliable.
Step 1
Follow the instructions in these support articles:
How to set up your Apple Wireless Keyboard
Apple Wireless Keyboard: Difficulty during pairing process
Step 2
The keyboard should pair automatically when you reboot. You may have to press and hold the power button on the right side of an Apple keyboard until the LED starts flashing.
Step 3
Reset the System Management Controller.
Step 4
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.Bluetooth.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
See these support articles:
Bluetooth keyboard may not pair during Setup Assistant
Wi-Fi and Bluetooth: Potential sources of wireless interference
Bluetooth: Unreliable wireless performance may occur when USB 3.0 external devices are close
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

HT4623 my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

the computer is a macbook pro, mac os x 10.6.08 and the ipod touch is ios 6.0.
the problem is that just updated the itunes on the computer and now the ipod won't connect because apparently the itunes on the ipod is not up to date but the iod is telling me that is is up to date, so i can't do a software update.

Can no longer connect to encripted wireless.

Hello,
I am running a wired and WPA TKIP Encripted wireless network through a WRT350N and Netopia DSL modem. I have a Western Digital Mybook Premium 500GB hard drive connected for storage.
The system had included 2 XP Home PCs one using a Linksys WMP54GS Wireless PCI adapter and the other using a Netgear “G” USB adapter configured through Windows since the Netgear software would only do WEP. There are also 2 laptops one being an older model with the Linksys “G” PCMCIA and a newer Core2Duo using Intel Proset.
February I built a New PC which I connected via CAT5 which required moving the WRT350N, modem and 500GB MyBook into the computer room. In this room we also have our Dual mode 2.4 Ghz Linksys CIT300 Skype phone and our 2.4Ghz main phone. The new PC also has a Logitech G7 mouse using 2.4Ghz wireless. Everything ran smoothly for just over a month.
Around the same time as the start of the network connection Issues I swapped the Motherboard in the New PC with an SLI version and set the machine back up still using CAT5 and no wireless.
I cannot say for certain that we didn’t have any issues before the time of the swap but it did become very noticeable around the same time and I just want to cover all the bases.
What happened is the wireless PCs slowed down a bit and then the Netgear connected PC started to have disconnect issues that were very noticeable since it was the machine that pulls our e-mail. We then noticed the Linksys G Desktop having connection speed issues and then finally all the wireless machines will no longer connect via encrypted wireless at all. If I reset the Router they connect without a problem. I can change the SSID and turn off the SSID Broadcast without a problem but the moment I turn on WPA Personal, TKIP, and set a password they all lose connection and will refuse to connect. I have sat down at each machine and deleted the wireless profiles and set them up with all the same SSID, Security, and keys but they will not connect.
I even ran Net Stumbler on my Laptop to look for other wireless networks but only find one on Channel 11. Mine shows up too but at Channel 1 using the 40Mhz channel. Network mode is set to Mixed, Radio band is auto, Wide Channel is auto, Standard channel is also Auto.
Is there anything else I may be missing? I have reset the router many times and have tried restoring from saved configurations but nothing works at all. The only thing that works now is the wired connection. L
I sure hope Linksys reads these forums because they sure do not read their tech support e-mails!
I look forward to any help.
Thanks,
Martin

First of all, re-download and re-install the latest firmware for your router. After installing the latest firmware, make sure you reset the router to factory defaults, then set up the router from scratch.
Next, make sure you have a unique SSID (don't use "linksys" ), and turn on SSID broadcast. Turning on SSID broadcast makes it easier for your computers to find and stay connected to your router. I used to recommend that SSID broadcast be turned off for security reasons, but this is no longer required because new "cracking" techniques have made this old trick useless.
As a test, turn off all your 2.4 GHz devices and unplug them from the wall. This would include your phones, wireless mouse, and any Bluetooth, wireless baby monitors, microwave ovens, wireless keyboards, etc. Also, turn off any 5+ GHz phones, as some of these also use the 2.4 GHz band. See if this makes a difference.
Since your Netgear "would only do WEP", I don't understand how you ever got it to work before with WPA encryption. Please explain. Are you saying that the Windows software was doing the WPA for you?
Update you computers with the latest drivers for your wireless adapters.
As infinityx mentioned, update Windows XP to at least SP2.
It sounds like you may have the Intel Pro Wireless 2200bg card. If so, this card is known to have connection problems. The problems with this card worsened with a recent Windows update, but were fixed with the latest driver. Go to the Intel web site and download and install the latest drivers.
Also, you can try another channel on your router. Since you have a neighbor on 11, try any channel 1 thru 6. (Always try to stay at least +5 or -5 channels from your strongest neighbors.).
Message Edited by toomanydonuts on 03-16-200704:01 AM

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

What do i need to connect my macbook pro to my samsung widescreen tv?

My Samsung Widescreen TV has a hook-up (15 pin connector/serial port?) for a PC. What do I need to do to connect my MacBook Pro to it and can I use the TV as the monitor or for viewing an internet website? I'm trying to use the larger screen for a meeting of several people to discuss website improvements?
Thanks

If you can tell me whch TV & MBP you have i can give you exact cable part numbers and settings but short of that i'll try & see what i can do for you. Older MBP do not support audio over the HDMI & by default VGA doesn't either so will need an audio cable in addition to the video regardless which input you use. aparently newer MBP Do support audio over HDMI so as long as your TV does also you're a one cable hookup. My Samsung has a specific HDMI port labled DVI/ HDMI which accepts a cable i got at the apple store & simply plug play. Look in your samsung manual to verify what resolutions the TV suppports, select the input & mode from your menue and set the resolution & you should be good to go. Obviously you'll need to do a little tweaking inorder to optimize the screen but assuming you're familliar with your mac to begin with it's a no brainer. you might not be able to run optimal resolution on the TV untill you close the lid (clamshell mode) on the MBP which means you need a key board & trackpad or mouse. on the other hand if you are attempting to mirror the displays or use it as a 2nd display those modes are also available from the MBP setup. you can detect & gather your screens & calibrate the screens right on the MBP (under dispalys) and once you have the TV reckognizing the input it's nothing but a monitor. now all of the above assumes you are NOT running Lion as i'm NOT. I hope this at least gets you in the ballpark.

Thunderbolt to hdmi... is there another way to connect my Macbook Pro to my HD TV

I want to connect my Macbook Pro to my tv and have read nightmare reviews about the Belkin cable to connect the thunderbolt to HDMI... I need to make this happen as cheap as possible and don't know which route to take?

Here is the start of the setup:
Click on the Wi-Fi Options button and provide the needed info:
Click on the OK button. Now check the Internet Sharing box to turn it all on. If the port box you checked is no longer checked, then uncheck Internet Sharing, check the port box again, then check the Internet Sharing box again.

Droid no longer connecting to MacB PRO

Similar Messages

Maybe you are looking for