Droid pro messaging is not that quick and freezes a little bit

I have the new droid pro and i love it. But when i go to forward messages it freezes a little bit. Does anyone out there have this problem? Is there any maintainance memory cleaning i need to do to it?

If you are using the stock messaging application, try doing a soft reset on the device.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
Then dial *228 send and option 2 on the device.
To forward a message, press the message to access the individual message in the threaded view. Press and hold the message you wish to forward. The Message optionsare displayed which include Forward message.

Similar Messages

TS3992 ipad message of not enough storage and can't get ipad to do anything

ipad message of not enough storage and can't get ipad to go to settings or close. Won't turn on or off

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

I've forgotten your password Baymel icloud when my resend the message does not appear anything and I can not activate the device

I've forgotten my password on icloud when i resend the message does not appear anything and I can not activate the device
any one help plz :'(

IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Please Get the iPod Touch User Manual for iOS 5

How can i activate my ipad mini? every time the error message is not going there. and the version has expired.

how can i activate my ipad mini? every time the error message is not going there. and the version has expired.

Try this link for activation problems ...
http://support.apple.com/kb/ts3424
If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account. There are discussions about this issue. Otherwise... for non-developers, I'm afraid you're on your on. Use Google.

Satellite Pro M10 will not boot again and comes up with the error message

My Toshiba Satellite Pro M10 notebook will not boot again and comes up with the error message "load error" when I push the power button.
The problem arised after installation of "symantec system works" and trying to restart windows XP professional to make the installed program executable.
What can I do to get the notbook restart again?

Hi everyone
If you cannot acces to the boot menu by pressing F8 you can try to recover the the master boot record from Windows Xp professional installation Cd, to do this:
Attention: don't run these commands if you have more than one operating systems running in your laptop.
Boot from Windows Xp installation cd
Choose repair installation from console by pressing "C" key.
A console will open asking you for administrator password, insert the password and press enter.
Run de command: FIXMBR (It will write a new boot record)
Run de command: FIXBOOT (It will write a new boot file)
Restart the laptop and now windows should start without problems.
Regards

Droid Pro sent SMS not showing up

Hi I just got a Droid Pro earlier today and I'm pretty happy with it except for one thing. I cannot find nor see my sent SMS messages. When I send a sms message, it will show up, then dissapear when I leave the conversation. Some will stay randomly but I'd say 95% of my messages do not show up in conversation threads. Is there any way I can find those messages or change the settings to have them saved in the conversation thread?

We would be glad to help with your Text message settings. Are you using a text message application like Handcent? If not Please check your settings Go to text Messages then menu>message settings>then text messages and check your settings. If your still experiencing issues please PM me and we will further troubleshoot with you.
Thank you

Finder extremely slow on a macbook pro, you can not turn off, and the color wheel appears to move any file

I have a MacBook Pro 2GHz i7 early 2011, 16GB RAM, a 128GB SSD and a 500GB standard. The OS is mountain lion and a month ago my finder is very slow, when moving a file appears the color wheel, also when you send a file to the trash. When you turn it on, the finder takes a long time to be active, the other apps work perfectly. When you turn it off stays white background with the spinning wheel, but never fails to go off. Heat much m'as than before and make lots of noise sinks. Sometimes also starts with the date changed to 2008, not always.
I tried to repair disk permissions, reset pvram even I formatted from a usb and the problem continues.
Please help.

First, back up all data immediately, as your boot drive might be failing.
A common cause of a slow user interface is a large set of image or video files on the Desktop with preview icons. If you have more than a dozen or so such files, move them to another folder.
Another possible cause is iCloud activity, especially Photo Stream synchronization. If applicable, uncheck all boxes in the iCloud preference pane and see whether there's an improvement.
Otherwise take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Select the 50 or so most recent entries in the log. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message. You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

My message did not get sent and now I do not know how to find it?

My new message does not show that it has been sent? I do not see the message anywhere. What happened to it if it isn't sent?

I am not clear what you mean. Start from the beginning and tell us a story of what you are doing and how you are doing it with what App. Use this as a guide:
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
From ChitlinsCC: "Keep It Short and Simple" - Take your time... but be thorough
ÇÇÇ

TS4009 When I turn on my iPad there is a message which says iCloud Backup This iPad has not been backed up in 5 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi. I have clicked OK and this message will not go away and wi

My iPad has a message iCloud not backed up in 5 weeks. I can not get the message to go away so that I can connect to Wi-Fi. I have a full charge on the iPad. Thanks, Maui LL

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

MacBook Pro Photoshop CS4 not smooth zooming and fine lines are broken

I got a new MBP 15" about a month ago and am also running Win XP via bootcamp. On the Windows side Photoshop CS4 will not smooth zoom and if I zoom out, fine lines are broken apart and only partially show. When I go into the performance preferences enable opengl is checked and under advanced, advanced drawing is checked, but the use for image display is grayed out no matter what I do.
On the Mac side it works fine using either the 9400 or 9600 chipsets so considering Windows uses the 9600M GT which is the discrete one, it should work.
There's no driver updates here on Apple.com and Nvidia.com says there is an update available, but when it tries to install it says the hardware isn't supported... even though on the screen before it says it is.
Any suggestions would be much appreciated

Anybody have any suggestions?

My MacBook Pro is always running very slow and freezes up at least once a day, please help!!!!

Over the last 6 months my Macbook pro is running slow and freezes up a lot, I've done a check with EtreCheck, report below.
If anyone can offer some advice I would be very grateful, cheers....
Problem description:
Consistently slow running of all programs and freezes up for 2/3 mins
EtreCheck version: 2.0.11 (98)
Report generated 16 November 2014 00:35:40 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 9 days 23:20:46
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (318.43 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.sbd.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AirPlayXPCHelper.plist
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.corestorage.corestoragehelperd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[running] com.epson.eventmanager.agent.plist Support
[loaded] com.epson.ews.launcher.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.0.0 Support
Silverlight: Version: 4.1.10329.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 180.44 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 999.53 GB
Total number of backups: 7
Oldest backup: 2013-12-06 12:44:36 +0000
Last backup: 2014-11-03 17:58:25 +0000
Size of backup disk: Adequate
Backup size 999.53 GB > (Disk used 180.44 GB X 3)
Top Processes by CPU: ℹ️
      5% WindowServer
      1% EEventManager
      0% fontd
      0% configd
      0% AppleSpell
Top Processes by Memory: ℹ️
137 MB com.apple.WebKit.WebContent
116 MB Safari
47 MB sandboxd
47 MB WindowServer
43 MB Finder
Virtual Memory Information: ℹ️
913 MB Free RAM
1.43 GB Active RAM
635 MB Inactive RAM
933 MB Wired RAM
36.97 GB Page-ins
2.13 GB Page-outs

You may wish to read about maintenance and upkeep of the OS X, plus other
information, across several topics in this site with topics divided into Guides:
•Tech Guides - TheSafeMac:
http://www.thesafemac.com/tech-guides/
Sometimes, items may have been inadvertently downloaded by accident or due
to poor advisement, and of those some can be a cause of slowness in Mac OS X.
Also, the use of scanning antivirus software can be a cause of slow and disruptive
system issues; since antivirus for the most part is not effective due to the nature of
the Mac OS X and the inability of an AV application to have records of unknown, &
unsubstantiated or rumored issues in the wild, since few or none are known to exist.
The note in the etrecheck report of excessive Page Outs, implies directly that the
computer may need to have more RAM installed; a matching pair of higher capacity
correct spec RAM chips, could be purchased from a reputable source & installed.
As much as, perhaps 16GB in a RAM upgrade, depending on the MacBook build.
All of those red-lettered items in the report that did not load, appear to be system
parts; perhaps that may be something to investigate. Not sure why that is...
{Because today is part of a weekend, I'd suspect the time of day and weekday are
both behind the lack of an earlier reply to your post here. Also, if there have been
weather or other disruptions in the lives of those volunteers who offer help, then
maybe they've had to modify their plans around such events. Or power outages.
We had one here for more than an hour, and everything went out. Even phones.}
So hopefully some other knowledgable readers may contribute ideas on how to
resolve the issues; troubleshooting may be helpful, and to read through sections
of TheSafeMac to see if there is any malware, adware, or other odd activity that
may point to a cause; removal suggestions for those are in that site. Also, if you
had visited any torrent or sharing sites, or downloaded free yet contaminated items
from software download sites, they could also affect your computer. There are
a few areas in that web site worth reading through.
In any event...
Good luck & happy computing!

IPod 30GB Problems with iTunes 9; Will not sync iPod and freezes iTunes

Since I have updated to iTunes 9 on windows xp (and more recently iTunes 9.0.1) I have not been able to sync my 5th generation iPod 30gb.
What happens when I connect my ipod is that iTunes will instantly freeze and not allow me to do anything on it, but I am able to open other windows just not iTunes. After about 10 minutes iTunes will unfreeze briefly and claim to be syncing my iPod. Eventually after a further 10 minutes I am greeted with a message saying:
"The ipod 'HARRY'S iPOD" cannot be synced. An unknown error occured (-50)."
http://tinypic.com/r/2wchbgy/4
Also when I try to access my iPod through the window's explorer, when I try to enter any files I get the message "Please insert a disc into drive F:" followed by "F:\ Photos is not accesible. The parameter is incorrect"
I have no problems synicng my iPod Nano 4th Generation 16gb.
I've tried to revert to iTunes 8 after uninstalling iTunes 9 but when I do it wont let me open it saying it cannot read the file "Itunes Library.lib"
Does anyone have a clue where the problem is? And better still how to fix it?
Thanks

metalhead684 wrote:
any reason as to why this is happening. I have an Ipod 80 gig fifth generation.
Do NOT Threadjack. Start your own topic please. Help you get in your topic may help others when searching for like topics (your post could be lost in a unrelated topic).
If you don't know how to post a new thread...
In order to see the post link, you need to drill down to the subtopic level of a discussion area. If you see a list of subtopics, you are not down far enough.
For example, from the main discussion menu, you can choose Classic iPod and you will see the following...
Note that in the Classic discussion there are three sub-topics you can choose and NO post link yet. Now pick any sub-topic, for example, pick "Using iPod Classic" and you will get the following...
Now you have a link to post a new topic.
Regards,
Patrick

Mac Pro display flashing like strobe light and freezes

What seemed like out of nowhere my mouse jumped across the screen and the display started flashing like a strobe. Then everything froze. Only way to reboot is by holding the power button for long enough. It boots fine and appears ok but then quickly freezes and/or starts flashing again. I've verified and repaired disks (both from CD and not), ran applejack, and it's still happening.
I also noticed a small black box (only a smal part of the display) with red squiggly lines) appears at the freeze, in a different place each time it locks up.
Anone know what's up?

I just learned that MacBooks with NVIDIA GeForce 8600M GT video cards have been failing at a higher than normal rate due to a packaging defect. Apple has been replacing these processors free of charge on certain computers.
http://support.apple.com/kb/TS2377

New files and folders on a Linux client mounting a Windows 2012 Server for NFS share do not inherit Owner and Group when SetGID bit set

Problem statement
When I mount a Windows NFS service file share using UUUA and set the Owner and Group, and set the SetGID bit on the parent folder in a hierarchy. New Files and folders inside and underneath the parent folder do not inherit the Owner and Group permissions
of the parent.
I am given to understand from this Microsoft KnowledgeBase article (http://support.microsoft.com/kb/951716/en-gb) the problem is due to the Windows implmentation of NFS Services not supporting the Solaris SystemV or BSD grpid "Semantics"
However the article says the same functionality can acheived by using ACE Inheritance in conjunction with changing the Registry setting for "KeepInheritance" to enable Inheritance propagation of the Permissions by the Windows NFS Services.
1. The Precise location of the "KeepInheritance" DWORD key appears to have "moved" in Windows Server 2012 from a Services path to a Software path, is this documented somewhere? And after enabling it, (or creating it in the previous
location) the feature seems non-functional. Is there a method to file a Bug with Microsoft for this Feature?
2. All of the references on demonstrating how to set an ACE to achieve the same result "currently" either lead to broken links on Microsoft technical websites, or are not explicit they are vague or circumreferential. There are no plain Examples.
Can an Example be provided?
3. Is UUUA compatible with the method of setting ACE to acheive this result, or must the Linux client mount be "Mapped" using an Authentication source. And could that be with the new Flat File passwd and group files in c:\windows\system32\drivers\etc
and is there an Example available.
Scenario:
Windows Server 2012 Standard
File Server (Role)
+- Server for NFS (Role) << -- installed
General --
Folder path: F:\Shares\raid-6-array
Remote path: fs4:/raid-6-array
Protocol: NFS
Authentication --
No server authentication
+- No server authentication (AUTH_SYS)
++- Enable unmapped user access
+++- Allow unmapped user access by UID/GID
Share Permissions --
Name: linux_nfs_client.host.edu
Permissions: Read/Write
Root Access: Allowed
Encoding: ANSI
NTFS Permissions --
Type: Allow
Principal: BUILTIN\Administrators
Access: Full Control
Applies to: This folder only
Type: Allow
Principal: NT AUTHORITY\SYSTEM
Access: Full Control
Applies to: This folder only
-- John Willis, Facebook: John-Willis, Skype: john.willis7416

I'm making some "major" progress on this problem.
1. Apparently the "semantics" issue to honor SGID or grpid in NFS on the server side or the client side has been debated for some time. It also existed as of 2009 between Solaris nfs server and Linux nfs clients. The Linux community defaulted to declaring
it a "Server" side issue to avoid "Race" conditions between simultaneous access users and the local file system daemons. The client would have to "check" for the SGID and reformulate its CREATE request to specify the Secondary group it would have to "notice"
by which time it could have changed on the server. SUN declined to fix it.. even though there were reports it did not behave the same between nfs3 vs nfs4 daemons.. which might be because nfs4 servers have local ACL or ACE entries to process.. and a new local/nfs
"inheritance" scheme to worry about honoring.. that could place it in conflict with remote access.. and push the responsibility "outwards" to the nfs client.. introducing a race condition, necessitating "locking" semantics.
This article covers that discovery and no resolution - http://thr3ads.net/zfs-discuss/2009/10/569334-CR6894234-improved-sgid-directory-compatibility-with-non-Solaris-NFS-clients
2. A much Older Microsoft Knowledge Based article had explicit examples of using Windows ACEs and Inheritance to "mitigate" the issue.. basically the nfs client "cannot" update an ACE to make it "Inheritable" [-but-] a Windows side Admin or Windows User
[-can-] update or promote an existing ACE to "Inheritable"
Here are the pertinent statements -
"In Windows Services for UNIX 2.3, you can use the KeepInheritance registry value to set inheritable ACEs and to make sure that these ACEs apply to newly created files and folders on NFS shares."
"Note About the Permissions That Are Set by NFS Clients
The KeepInheritance option only applies ACEs that have inheritance enabled. Any permissions that are set by an NFS client will
only apply to that file or folder, so the resulting ACEs created by an NFS client will
not have inheritance set."
"So
If you want a folder's permissions to be inherited to new subfolders and files, you must set its permissions from the Windows NFS server because the permissions that are set by NFS clients only apply to the folder itself."
http://support.microsoft.com/default.aspx?scid=kb;en-us;321049
3. I have set up a Windows 2008r2 NFS server and mounted it with a Redhat Enteprise Linux 5 release 10 x86_64 server [Oct 31, 2013] and so far this does appear to be the case.
4. In order to mount and then switch user to a non-root user to create subdirectories and files, I had to mount the NFS share (after enabling Anonymous AUTH_SYS mapping) this is not a good thing, but it was because I have been using UUUA - Unmapped Unix
User Access Mapping, which makes no attempt to "map" a Unix UID/GID set by the NFS client to a Windows User account.
To verify the Inheritance of additional ACEs on new subdirectories and files created by a non-root Unix user, on the Windows NFS server I used the right click properties, security tab context menu, then Advanced to list all the ACEs and looked at the far
Column reflecting if it applied to [This folder only, or This folder and Subdirectories, or This folder and subdirectories and files]
5. All new Subdirectories and files createdby the non-root user had a [Non-Inheritance] ACE created for them.
6. I turned a [Non-Inheritance] ACE into an [Inheritance] ACE by selecting it then clicking [Edit] and using the Drop down to select [This folder, subdirs and files] then I went back to the NFS client and created more subdirs and files. Then back to the
Windows NFS server and checked the new subdirs and folders and they did Inherit the Windows NFS server ACE! - However the UID/GID of the subdirs and folders remained unchanged, they did not reflect the new "Effective" ownership or group membership.
7. I "believe" because I was using UUUA and working "behind" the UID/GID presentation layer for the NFS client, it did not update that presentation layer. It might do that "if" I were using a Mapping mechanism and mapped UID/GID to Windows User SIDs and
Group SIDs. Windows 2008r2 no longer has a "simple" Mapping server, it does not accept flat text files and requires a Schema extension to Active Directory just to MAP a windows account to a UID/GID.. a lot of overhead. Windows Server 2012 accepts flat text
files like /etc/passwd and /etc/group to perform this function and is next on my list of things to see if that will update the UID/GID based on the Windows ACE entries. Since the Local ACE take precedence "over" Inherited ACEs there could be a problem. The
Inheritance appears to be intended [only] to retain Administrative rights over user created subdirs and files by adding an additional ACE at the time of creation.
8. I did verify from the NFS client side in Linux that "Even though" the UID/GID seem to reflect the local non-root user should not have the ability to traverse or create new files, the "phantom" NFS Server ACEs are in place and do permit the function..
reconciling the "view" with "reality" appears problematic, unless the User Mapping will update "effective" rights and ownership in the "view"
-- John Willis, Facebook: John-Willis, Skype: john.willis7416

IMac recognizes iPod, but iTunes does not...and freezes.

Hello.
When I connect my iPod Classic (I have reset it), the icon appears on my iMac, but it does not in iTunes, and iTunes immediately freezes, necessitating a force quit. iTunes is fine without the iPod connected.
I have upgraded iTunes from 9.2 to 10.0, but the problem remains. Can anyone offer help or suggestions?
Thanks.

Hello Jerry,
Here is the Apple support document related to your issue.
http://support.apple.com/kb/TS1410
If no luck there, I would try reformatting the iPod via Disk Utility using the instructions in this article.
http://b-rockprogramming.blogspot.com/p/ipoditunes-tutorials-and.html
Other than that though, I don't have too much for suggestions. Best of luck.
B-rock

Droid pro messaging is not that quick and freezes a little bit

Similar Messages

Maybe you are looking for