Droid pro ringer turns off when I make or receive call.

When i make or recieve a call the phone turns off all sounds. When I hit the volume button once everything is back on . Any ideas? I can not find any apps that may be doing it but i haven't started deleting them to see either.

hco1972, the audio issue is not a known issue with this phone and I'm sorry to hear your having this problem. I'm happy you can hit the volume key to restore the sound but understand the inconvenience of having to perform this step every time you have a call or want to make a call. I reviewed this issue in detail and found that you can change some settings to resolve this issue. I have listed the steps below.
1) Click Settings
2) Click Call Settings
3) Click Uncheck HAC Mode Settings
After you have performed the above steps, power cycle your device off an on for 1-2 minutes.

Similar Messages

After a successful home button repair, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

After a successful home button repair on my iPhone 4, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

I guess your definition of a "successful repair" is different from most people's.
If you got it serviced by Apple, take it back to them.
If you had it serviced by a 3rd party, Apple won't touch it. Take it back to whoeever fixed it for you.

Just updated my iPhone 5 to the new IOS and now when I make or receive calls, the other person can't hear me. How can I fix this?

Just updated my iPhone 5 to the new IOS 7.0.6and now when I make or receive calls, the other person can't hear me. I have tried doing a hard reboot and resetting the network settings, but neither of those solved the problem. Any suggestions??

Hello AllieCLT,
The following article provides troubleshooting steps that can help get your iPhone's microphone working.
iPhone: Microphone issues
http://support.apple.com/kb/TS5183
Cheers,
Allen

Macbook pro 17 turns off when switching to high performance mode

Hi guys!
My 2009 Macbook pro 17 turns off and goes dead when switching to "high performance" graphics in the energy saver controll panel.
This happens also when the battery is 100% charged. i must reconnect powersupply to reboot.
The battery is new, from june this year.

Aardal87 wrote:
I have just re installed the system. and the problem continues.
I guess ur solution isnt worth trying on a fresh system install?
It will not do any harm trying it but you are probably correct in these circumstances.
If the symptoms are consistent, then a savvy technician at an Apple store genius bar should be able to define the problem.
Ciao.

I dont have sound when I make or receive calls. Please Help!

For the last two days, I havent been able to make or receive calls because I either have no sound or static. I was chatting with AT&T online support and he tried resetting and other various options to fix it but finally advised me to take it in to a store and get a new sim card. I just did that and still, I do not have sound. It is very frustrating!! I havent damaged my phone in any way, I havent dropped it or wet it....I checked to see if its still under warranty but of course, it expired. What are my options? Can anyone help?

Can you use the earbuds that came with the phone to see if you can make or receive a call with them? If so then you might have a bad earphone jack that is not switching to the internal speaker when you remove them.

Macbook Pro suddenly turned off when fully charged and won't restart. Charger not working either coincidently

My 2 year old 13" MacbookPro suddenly turned off, presumably when the screen automatically dimmed (or went to sleep?) and now it won't turn back on. It was at 96% charge and now when I use the battery checker on the side, nothing shows up. No lights or anything. The charger doesn't seem to work either even after trying it on different outlets. This has never happened before but it has been harder to wake it from sleep in the last 6 months or so. I would have to push the On/Off button for a sec and the screen would turn back on. Also when I turn it on, the password screen is sometimes off-centered..weird.
I'm using Yosemite, the latest version..not sure what it is and can't check right now...I had to go use a PC to ask this question >_<

Try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao

My MacBook Pro screen turns off when I open the lid!

This has been driving me nuts, and also apparently Apple as well.
When my MacBook Pro is connected to a power adapter, if I close the lid it sleeps like a good little Mac. When I open the lid, the display comes on instantly. Then after about a second, it goes black. The LED backlight turns off. I can get it to come on using either of two ways: 1) touch either of the brightness buttons, or 2) remove and replace the power connector.
Now, here is the weird part: it only seems to do it when I am logged in as me. If I login as guest, it doesn't happen. That would seem to imply it is something about my profile that causes it to happen. So I whacked ~/Library/Preferences and it still happened. So where is this particular bit of nastiness hiding?

OK, so I think I solved my issue. It was caused by the system not going to sleep (The screensaver thing was a dead end).
When I ran the console app pmset, I got something like this:
➜ ~ pmset -g assertions
12-06-29 9:11:06 AM EDT
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      1
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
The process that was causing PreventSystemSleep to be 1 was "org.cups.cupsd" which is the print service. So I checked all my printers, one of them was "In Use". When I opened it, there weren't any jobs listed. I went through the options and selected Jobs > Show Everyone's Jobs and sure enough there was a job there. I deleted it and everything seems to work now.
The odd thing is that print job was probably from my other account which didn't seem to have this screen problem. Anyway, I hope this helps anyone out there....

IPhone 3G Screen turns off when lowering from ear during call

I have my 3rd iPhone; bought it yesterday (last one stolen in Denver Airport). The screen works normally when using the functions other than the phone. When making a call everything is normal but when I put the phone to my ear, I have noticed that the screen does not turn off, however, when lowering the phone to look at the screen during the call, it goes completely blank despite the call still being connected. I tried pushing all the buttons to no avail. I did a reset and also a software restore without success. I discovered that when I lowered the phone during a call and the screen goes blank, I put my warm thumb over the little horizontal sensor above the screen and it would come back on. If I released my thumb it would turn off (the exact opposite of what should happen). I called apple, they said to return the phone because there probably is a hardware issue. I bought it at an ATT store in Santa Barbara, CA; I am told there is a restocking fee to replace the phone!! Amazing, buy a new product, its defective, return it for a new one, and they extract $20 additional dollars from you. Anyone else with a similar problem.

If it is not in a case and it is defective the only way that the AT&T store will swap out the phone for a new one without the restocking fee is if it's under 14 days. After the 14 days you have to bring it to an Apple store for repair or a replacement. I recommend purchasing the iCare warranty through apple, because it will extend the warranty to 2 years on the phone, and when your phone breaks the apple store will replace it on the spot if they can't repair it in the store instead of sending it out for repair and you waiting for it.

I accidentally left my phone in my work truck and the temperature got too hot..Since I cooled down, everything works fine except when I make and receive calls, the person can't hear me at all :(. Does anyone possiblly know what I can do ?

My iPhone 4s got too hot and since any calls I make or receive, the person on the opposite end can't hear me at all... Any suggestions?

I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you

People can't hear me when I make or receive calls even though I can hear them.

My iphone 4 was working fine yesterday but today it's not!
I couldnt see why it wasn't working properly so thought i'd try the old "if all else fails turn it off and turn it back on again" lol and when I instantly made a phone call after doing that the person at the other end could hear me fine but then a few minutes into the conversation it went again and they couldnt hear me. I'm definitely not accidently touching the mute button as I have checked this already.
Any ideas please? Thanks

Try this...
Close All Open Apps... Sign Out of your Account... Perform a Reset and try again.
Reset... No Data or Settings will be lost...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I cannot hear people over my phone when I make or receive calls

This is a brand new iPhone 5 - did not drop it or has any other damage. I cannot hear people when I've answered. Volume on full, no plastic cover, just very poor quality of sound

" I found a guy who was having a similar problem and "solved" it by disabling 3G on Settings>General>Network"
there is no such thing in the iphone settings... i went to settings, general and theres nothing about "network" or 3G
complete bullocks and still have the problem

On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

Macbook pro turns off when i unplug power cable

my macbook pro instantly turns off and wont power back on when i unplug it. it is only 6 months old and all seems ok on power readings.....
Battery Information:
Model Information:
Serial Number:          W012859X7D3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          5499
Fully Charged:          Yes
Charging:          No
Full Charge Capacity (mAh):          5609
Health Information:
Cycle Count:          70
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          12459

Reset your SMC and see if that makes a difference: http://support.apple.com/kb/HT3964 . If that doesn't do it, take it into the Apple Store or AASP for warranty service.

How do I make my iPad turn off when the screen is covered?

My old iPad would turn off when I closed the cover but I cannot find how to make the iPad air turnoff in a similar fashion?

dpna wrote:
Yes it is a proper cover
If it is an APPLE COVER, perhaps it's not the one for that model. But, if it's not an Apple cover, then maybe the manufacturer hasn't set up the magnets the way they are supposed to be.
I'm going to quote from another post elsewhere ...
Are you using a genuine Apple cover or another third party cover?
It's the magnets in the cover which activate the lock/unlock feature to appear in your settings. In earlier iPads you could slide a magnet down the side of the iPad to find where the magnet activates and turn the feature on.....Apple have now changed how this works with the iPad Air. Whereas before there was only 1 magnet positioned in the cover for earlier iPads, it is now thought there are 2 with alternating polarity.
So if you want this feature you will need to buy an Apple cover or wait for third party manufacturers to get their magnets in the correct position.
If you do have a genuine Apple cover then there is something going wrong here....

I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!

I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!

Contact support by web chat or phone to reset activations.
Mylenium

Droid pro ringer turns off when I make or receive call.

Similar Messages

Maybe you are looking for