Droid R2D2 Turns off when signal lost!

I have a question, has anyone experienced the R2D2 Droid turning off when no reception is found? I've had my R2D2 for 2 weeks and it has turned off twice and the turn back on. Is this normal updating? Any help is appreciated.

jasnmar wrote:
@Bob - my d2 also "randomly" restarts. Mine isn't associated with signal loss, as I've watched it happen with 4 bars sitting in my hand.
My restarts aren't very often, soifyou are seeing this a lot there could be a misbehaving app or a hardware problem.
First thing to try would be as advised above. Next thing is a restore factory defaults.
jason
My wife and my Droid 2's also have had random "restarts." She just told me last night she blamed hers on bad coverage, but I don't know if that is the only reason. My D2 has done it in good service areas too. VZW tech support suggested a factory reset. After the reset I went from once a week restarts to 2 to 3 times a day restarts. So called back and VZW sent me a replacement. Just had it a few hours, so still waiting to see how it works.
My suggestion... do a factory reset, and if that doesn't solve it call Tech Support. They are really good about making sure our phones work good, but they are going to suggest a reset first.

Similar Messages

  • I have lost my iphone and the power was turned off when i lost it and i dont have find my iphone installed what can i do?

    I have lost my iPhone 4s and i had it turned off when I laid it down somewhere and I have not installed the find my iPhone app. Is ther anyway possible to locate it.

    Nope.  If you didn't have find my iphone turned on, you will not be able to locate it.  File a police report, and contact your carrier.
    http://support.apple.com/kb/HT5668

  • My ipod 5 turn off when im listening to radio. It is brand new.... I bought it just yesterday. :(

    My ipod 5 turn off when im listening to radio. It is brand new.... I bought it just yesterday.
    . please help

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • The home sharing always turn off when i try to see movie on my apple tv

    Home sharing turns off when i try to watch movies on my apple tv

    If your Apple TV is connected to your network via wi-fi, it could boil down to a range / signal quality issue.  Are you able to stream any other services to the Apple TV without issues?  If possible, connect the Apple TV with ethernet cable and see if that resolves your issue.

  • I own an iphone 3gs and it just turns off when it wants, like when its loading something? does anyone know whats the problem?

    i own an iphone 3gs and it turns off when it wants even if the phone is 100% battery, its when the phone is loading something. does anyone know my problem

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Horizontal spry menu style appears turned off when on the internet though can view it in live mode!?

    The style of the horizontal spry menu seems as to have been turned off when on the web though is visible and functioning on CS4 Dreamweaver design and live views. I have styled the spry menu and can view it in the properties section though the style setting is there on the internet it looks as if the styles have turned off and appears unformatted vertically when it should be a cascading horizontal menu bar. Not sure where the error is, I have looked at the coding and as I'm not the most experienced with spry.....
    this is the coding above the head.
    <script src="../SpryAssets/SpryMenuBar.js" type="text/javascript">
    <link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
    <!--
    var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    //-->
    </script>
    I have noticed that SpryMenuBarHorizontal.css doesn't appear in the spry assets folder, does this matter? (not sure how to insert into the assets menu).  Any help would be greatly appreciated!

    thanks for testing it. I'm not sure how to proceed though as the css file is in my local_sites/spry assets folder for the website. I've tried to point it to other (copies of SpryMenuBarHorizontal.css) and spry assets folder externally from the site and again internally in the root folder and seems to make little or no difference.
    Your suggestion of what it should read,(sorry to sound so naive at all this) though would you mind giving a step-by-step guide on how to go about it? as I'm obviously missing something in the setup process.
    thanks again for your help.

  • My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery"  on its screen.

    Hi! My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery"  on its screen. I tried with different chargers, still dead! What's weirder is that my sister who has iPhone 4 experienced the same today! No we don't live in the same house!! Does anyone have the same problem?
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • Macbook works fine when plugged in, turns off when unplugged.

    Hello all,
    As stated my 2008 Unibody 13 inch, serial number W8******1AX turns on and works fine when it is connected to power.
    When it is unplugged it instantly turns off and turns its fans on full until it depletes the battery (so it is obviously getting power.. just not where I want it)
    Since the problem began I have tried two new batteries, neither of which had any different symptoms.
    Before this, the computer had an intermittent life, it would turn off when it saw fit, which got progressively worse.
    I have followed the guides to resetting the SMC but have had no luck
    I have been running it without the battery (to save it charging and discharging for no reason) and sometimes when plugged in without a battery
    the magsafe green indicator light goes from dim to bright.
    With the battery installed it stays bright orange until it is charged and then switches to bright green.
    (I have tried it with another charger, same symptoms)
    Here is the Battery Read out;
    Battery Information:
      Model Information:
      Serial Number:          ?00€›Æ⁄¬+9tt
      Manufacturer:          GSA-1280
      Device Name:          ASMB016
      Pack Lot Code:          3230
      PCB Lot Code:          30db
      Firmware Version:          ddae
      Hardware Revision:          dac2
      Cell Revision:          2b39
      Charge Information:
      Charge Remaining (mAh):          4113
      Fully Charged:          No
      Charging:          Yes
      Full Charge Capacity (mAh):          4200
      Health Information:
      Cycle Count:          1
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          379
      Voltage (mV):          12275
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          15
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          5
      Automatic Restart on Power Loss:          No
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      Battery Power:
      System Sleep Timer (Minutes):          2
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          1
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x00ebc719
      Charging:          Yes
    Power Events:
    Repeating Events:
      Type:          Wake or Power On
    If this at all helps.
    I'm at my wits end with this thing, I know it is getting on in age, but other then this, it has been flawless in its operation.
    If anyone has any suggestions I would be happy to hear them.
    Many thanks!!
    <Edited By Host>

    There may be a hardware cause behind the symptoms you cite, so a diagnostic
    is recommended to see which parts are weak or failed in the computer. A visit to
    an Apple Store with Genius bar may be helpful, as they can perform testing there.
    A call ahead or use their web page, to schedule an appointment, is advised.
    In the US and Canada, the Genius bar at a retail Apple Store can perform
    a diagnostic service, for no fee, even on Apple products without AppleCare.
    See links:
    Apple - Concierge
    Genius Bar - Apple Retail Store:
    http://www.apple.com/retail/geniusbar/
    List of Apple Stores, cities, countries:
    http://www.apple.com/retail/storelist/
    Also authorized Apple service providers who can test, repair and guarantee their
    work should be able to handle an out-of-warranty older Mac, within age limits...
    Ones too old for the Apple Store could be serviced at a Specialist, instead.
    •Find Locations - Sales, Service, Training, Consulting:
    https://locate.apple.com/
    •Did you try resetting the System Management Controller?
    Intel-based Macs: Resetting the System Management Controller (SMC)
    •A reset of NVRAM may help with some issues:
    About NVRAM and PRAM
    •Calibrating is part of maintenance, esp with older portables:
    Apple Portables: Calibrating your computer's battery for best performance
    •The power adapter can be problematic and cause issues, so there's this:
    Apple Portables: Troubleshooting MagSafe adapters
    Also another item, other than keeping the magnetic connections clean of
    debris, grime, and corrosion, is to check the MagSafe Board or have it
    checked as part of a greater diagnostic. This board is behind the port
    that supplies the computer and the battery with power from the adapter.
    When it partially fails or if/when one of the connecting wires or plug fails
    you can find odd issues or partial use. The battery may charge but it
    may not be able to power the computer, and other odd effects.
    https://www.ifixit.com/Device/MacBook
    In older portable Macs, this was generally called a 'DC-in board' and as
    such, you could read about it in an iFixit repair guide for the MacBook
    model you have. These vary so the matching article is recommended to
    see if that is something you may want to try. But I would have diagnostic
    testing done and avoid additional damages from attempted DIY efforts.
    There have been a few reports of other failure on the logic board that
    contributes to a partial failure of the charging system, so about all this
    may do is troubleshoot around the failure without finding an exact cause.
    However it goes...
    Good luck & happy computing!

  • My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    Sorry i mistakenly made this question. It was alright. No Problem At ALL

  • I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4.  It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition.  Help!

    'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4.  It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition.  Help!

    Hi there 8472kck!
    I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    and that information comes from this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Why won´t my display turn off when i call (iphone 4s ios 5.1)??

    hi
    i have a iphone 4s with ios 5.1
    since i updated to 5.1 i have the problem that the display won´t turn off,
    when i call with someone.
    i have reset the iphone more than one time.
    I don´t know what i can do more.
    ps: sorry for my englisch

    ach nee....
    i have no protection on the iphone and i know the display turns only off when i hold it at my ear.
    my problem IS that the display won´t turn off when i hold it at my ear.
    This problem is since the update to 5.1!

  • How do I make my iPad turn off when the screen is covered?

    My old iPad would turn off when I closed the cover but I cannot find how to make the iPad air turnoff in a similar fashion?

    dpna wrote:
    Yes it is a proper cover
    If it is an APPLE COVER, perhaps it's not the one for that model. But, if it's not an Apple cover, then maybe the manufacturer hasn't set up the magnets the way they are supposed to be.
    I'm going to quote from another post elsewhere ...
    Are you using a genuine Apple cover or another third party cover?
    It's the magnets in the cover which activate the lock/unlock feature to appear in your settings. In earlier iPads you could slide a magnet down the side of the iPad to find where the magnet activates and turn the feature on.....Apple have now changed how this works with the iPad Air. Whereas before there was only 1 magnet positioned in the cover for earlier iPads, it is now thought there are 2 with alternating polarity.
    So if you want this feature you will need to buy an Apple cover or wait for third party manufacturers to get their magnets in the correct position.
    If you do have a genuine Apple cover then there is something going wrong here....

  • My Ipodkeeps turning off when i turn it on and it goseto the apple logo

    Myapple i pod keeps turning off when im on it and it goseto the apple logo

    What computer? What version of OSX is running? Some information other than my car won't start.

  • TS1398 my iphone turned off when using wifi

    my iphone turned off when using wifi

    That sounds like you have internal damage in the SIM card slot. Try taking the phone to an Apple store for evaluation. Make a genius bar appointment first at http://apple.com/retail.

  • My iphone turns off when i am talking

    my iphone3gs turns off when i am talking

    Hi this post might help https://discussions.apple.com/thread/2782776?tstart=0

Maybe you are looking for

  • Best way to make an image backup of a Boot Camp partition?

    I want to upgrade my Windows XP partition to Windows 7. Before I do, though, I want to make a complete image backup of the partition, so if anything gets terribly screwed up, I can restore from the image and be right back where I started. How can I m

  • No entry in department field and exclude 3 OU's

    Hi, I'm trying to get a list of all my users who do not have entry in the department field, but exclude user account in 3 OU's (Ex Employees, MyTest and the Users container). This what I have come up with so far: Get-ADUser -Filter {Department -notli

  • Syncing Podcasts after OS 3

    After upgrading to OS 3 certain old podcasts which were long deleted and which I can not find in my library reappeared on the phone. I can not figure out how to delete them. Syncing certainly isn't working Any ideas?

  • ULW Error

    Hello all, I could able to find the UWLs.I am getting the warrning like  Cannot connect to the provider. in detail : Exception type:java.lang.RuntimeException Message:Error while silently connecting: org.w3c.www.protocol.http.HttpException: Proxy res

  • Safari is going nuts in mavericks

    Since I loaded Mavericks,  Safari has become unuseable.. WIll not load correctly, freezes screens, wont allow form fill in... IN other words, a complete mess. Having to use Chrome to do business... This is a HORRIBLE release of code....