Droid Random Reboot After OS Update
I have a Droid 2. The phone ran an OS update. Android version 2.3.3. System version 4.5.601.A995.Verizon.en.US. Build number 4.51_57_DR2-31
Randomly, when I wake up the phone from sleep and touch the screen it forces a reboot.
Also, and randomly when I power down the phone, it looks like it is off but a few seconds later it boots on again.
Has anyone has been experiencing a similar problem? This didn't happen before the OS update.
I am having issues with random reboots. It happens several times a day, twice so far in 4 hours this morning. If I am some place I would normally put the phone on silent, I have to remove the battery because the reboots are not silent. My screen will also freeze at times and a battery removal is the only cure. Sometimes during a reboot, it will hang on R2D2 and again, a battery removal is the only recourse. I was going to attempt a factory reset but since I see that hasn't worked for some, I may not bother. It is a time-consuming process.
Similar Messages
-
Ipad 3 randomly reboots after last update
Last night I updated the IOS to 6.1
now the Ipad randomly reboots
Even when it sits idleSame issue with my iPad 3. Happened with 6.1.3 and still happens after upgrade to 7.
It's nearly full, perhaps that's contributing to the problem. Apple doesn't seem to know how to do memory management properly, nor QA, for that matter.
Also, they conveniently forego the troubleshooting tools present on other platforms. So the only way to get some insight is to bring it to the "Genius". Problems with that approach are: most often, the "Genius" isn't that bright a bulb and won't find (or won't be willing to spend time to search for) the root cause. Also, they now require an appointment, and that's a major PITA. I just don't have the time to deal with them and their ways to disguise shortage of qualified support resources under fancy terms.. My next portable device will be a slate! -
My iPod 4 (2010) randomly reboots after 5.1.1 upgade to iOS6 (WDT timeout).
My iPod 4 (2010) randomly reboots after 5.1.1 upgrade to iOS6 (WDT timeout).
After reboot I cannot power it with Power Button. Have to do Power + Mac, hold to 10 sec and than it will go ON. After 1 minute when it will go to sleep it will start randomly reboots.
Diagnostics & Usage Data log is shoving multiple "panic" error with Debug message "WDT timeout".
Any Advice what is wrong? With 5.1.1 it was running like charm.
Very disappointing.Try the following:
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
4s won't reboot after ios7 update. I have restored 4 times. Every time it gets stuck on Apple icon with update bar at 10%
HELP!That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10
Hello,
I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
Your help is sincerely appreciated. Thanks.Good news!
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing. -
Ipad Generation 1 unresponsive/won't reboot after App update
My Ipad became unresponsive or it would not reboot after updating a few App's update. It would go into a black/purple screen mode (along the edges) with "no" apple logo. I tried the resetting method (top side button and home base button) and it did not reset. I tried resetting via itunes and I made sure that my Itunes was up to date but it still did not reset Ipad. I went on youtube and found out about a 'jailbreak' system known as 'redsn0w' and follow the instruction to break up whatever was causing my Ipad to become unresponsive. I believe this 'jailbreak' help to reboot the Ipad but I was not out of the woods just yet. For two weeks my Ipad was generating a "photo snap sound" when I tried rebooting the Ipad with the home base button. When connected to my macbook via iTunes it would also prompt or activate my iPhoto to load the photos from my Ipad. My Ipad 1 does not have a camera nor do I have an external (after market) one for that matter. The photo were the actual slide button to open the App's within the Ipad. I was baffled, confuse, and clueless. As I made several attempts to reset the Ipad It was still not displaying the apple logo and was not responding. I went back to 'redsn0w' to reboot and then reset it via Itunes to its original settings and later upload the latest firmware. While connected to my macbook, I was able to see all of my app's and began removing of them preferably Iphone app. I then decided hold off on the app's update and try to see if which of the App's was the culprit. It appears that the Ipad was confusing some or one of my "Iphone" app. I removed the iPhoto from the base of the Ipad and made it into a widgit with google earth. Then while viewing each of the app udate I saw that the "bump update" had something to do with photo. And it hit me, when I rebooted via Itune the first time the ipad rebooted but there was a brief moment where I tossed it on my back pack and it black out again. I then deleted this "Bump App" from the Ipad to prevent it from loading it lates update and I am happy to report the Ipad is now working properly. If you're not familiar with "Bump" this app is use with Iphone to exchage data/info from one iphone to another. I just now realize that you can also share photo wit "Bump" but not certain why this would cause this type of malfunction to my Ipad.
I don't know if this would help anyone out there but I would like to get the word out for anyone who may have this problem or situation. I welcome any other theory or better explanation because this is a conclusion that I came to.My Ipad became unresponsive or it would not reboot after updating a few App's update. It would go into a black/purple screen mode (along the edges) with "no" apple logo. I tried the resetting method (top side button and home base button) and it did not reset. I tried resetting via itunes and I made sure that my Itunes was up to date but it still did not reset Ipad. I went on youtube and found out about a 'jailbreak' system known as 'redsn0w' and follow the instruction to break up whatever was causing my Ipad to become unresponsive. I believe this 'jailbreak' help to reboot the Ipad but I was not out of the woods just yet. For two weeks my Ipad was generating a "photo snap sound" when I tried rebooting the Ipad with the home base button. When connected to my macbook via iTunes it would also prompt or activate my iPhoto to load the photos from my Ipad. My Ipad 1 does not have a camera nor do I have an external (after market) one for that matter. The photo were the actual slide button to open the App's within the Ipad. I was baffled, confuse, and clueless. As I made several attempts to reset the Ipad It was still not displaying the apple logo and was not responding. I went back to 'redsn0w' to reboot and then reset it via Itunes to its original settings and later upload the latest firmware. While connected to my macbook, I was able to see all of my app's and began removing of them preferably Iphone app. I then decided hold off on the app's update and try to see if which of the App's was the culprit. It appears that the Ipad was confusing some or one of my "Iphone" app. I removed the iPhoto from the base of the Ipad and made it into a widgit with google earth. Then while viewing each of the app udate I saw that the "bump update" had something to do with photo. And it hit me, when I rebooted via Itune the first time the ipad rebooted but there was a brief moment where I tossed it on my back pack and it black out again. I then deleted this "Bump App" from the Ipad to prevent it from loading it lates update and I am happy to report the Ipad is now working properly. If you're not familiar with "Bump" this app is use with Iphone to exchage data/info from one iphone to another. I just now realize that you can also share photo wit "Bump" but not certain why this would cause this type of malfunction to my Ipad.
I don't know if this would help anyone out there but I would like to get the word out for anyone who may have this problem or situation. I welcome any other theory or better explanation because this is a conclusion that I came to. -
Automatic double reboot after installing update
Hello everyone,
After installing update 10.5.6, my computer automatically restarted twice (the double "bong" sound). I was wondering if this is an unusual occurrence or part of the normal system update sequence.
Have not had this occur previously and was wondering if anyone else had this effect when installing 10.5.6
Thanks.
joeMy iMac and my wife's MacBook both did the double reboot. It scared me the first time my iMac did the double reboot on 10.5.5 but this time I expected it. On my wife's MacBook it also had a firmware update and for the first time since we bought her computer I heard the fan going at a really high speed for a couple seconds and then stop. The fan has never since come on that fast so I guess it was the computer was just testing the fan.
-
Random restarts after Black update Lumia 820
Hi, I have a problem. I had GDR3 developer version without Black, everything was ok, but after Black update, my phone is randomly restarting. I still have the same apps asi without Black. I made hard reset, but nothing, I made hard reset without restoration of my previous data, and it is still restarting. I made software flash over nokia software updater for retail but it is still randomly restarting.
Tell me what to do, because it makes me angry and I'm planning to sell and never buy Nokia Lumia phone again!I have sam issue on Lumia 720, i never had random restart before gdr3+Black, i did not dev unlocked my phone i did officiall ota. Also i get 8bit color, stuck screen more often now. Soft and hard reset don't help. And i hate to see Nokia don't answer ur question yet.
-
Two issues: iMac randomly reboots after watching Netflix, and left fan randomly turns on
Two issues: iMac goes into kernel panic and reboots after watching Netflix in HD, and left cooling fan randomly starts. Is this RAM or logic board?
Specs:
Model Name: iMac
Model Identifier: iMac12,2
Processor Name: Intel Core i5
Processor Speed: 3.1 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 20 GB
Boot ROM Version: IM121.0047.B1F
SMC Version (system): 1.72f2
The fan issue has been there for a while, but the kernel panics, AKA crash and reboots started after I got new Crucial RAM for the 2nd time (returned and replaced the two 8GB sticks, because the crashes were worse). Are the chances that I got 2nd batch of RAM likely, or is there logic board issue here?You should post the most recent panic report. http://support.apple.com/kb/TS3742
-
Running SCCM 2007 SP2 R3 and having two big issues with SUP that impacted us severely with the February patches. An RDP patch from November broke our 2-factor authentication (2FA) method, so we stopped deployment until Microsoft could fix the
patch. Rather than fixing the patch...they made a patch for the patch.
We divided our servers up into multiple Day/Time maintenance windows, like SUN, MON, TUE, and from 0200 to 0600 AM, and we run deployments weekly as needed.
There doesn't seem to be a way in SUP to "let SCCM control reboot" and ALWAYS reboot (whether the patches request it or not), and, as a result, we seem to have an awful lot of servers that are stuck at "reboot pending" after patch installation,
and have actually taken to using a third-party program to reboot the servers.
There also doesn't seem to be a way to force SCCM SUP to rescan the computer after the patch is applied until after a day...or, for servers, a week (from Mon to Mon, for example).
What happened this time around was that the first patch installed and broke 2FA, the second patch is not recognized as being needed until after a reboot and rescan--since that did not occur, it took up to a week to get the second patch installed (IF the
server ever was rebooted), which...was unacceptable.
Soooo...how can I:
1. ALWAYS force SCCM to reboot after patching (60-min countdown if user logged-on), just like we do with our normal deployment advertisement, package, program.
2. Force a WUA scan after this reboot, so, if remaining patches from this patch group are needed, they get detected and installed, and hopefully this will all work within the 4-hour window (we might be able to extend it earlier,
but, not past 0600).
Thanks!Thanks, Don. OK, if there is a "reboot required" returned at the end of the patch deployment...shouldn't the computer then reboot? We see a large number of computers with "reboot required" that never reboot. Is there something wrong in
the setup to stop a reboot from occurring?
Thanks.
It looks like you've continued the conversation with Jason and it's taken an interesting turn ;)
But, in the case where a reboot_required is the returned resultcode, CCM will look to your MW and deployment settings, and the context of the installation event (enforcement etc), to determine if the reboot request should be honoured or refused.
You should be able to see all the to-and-fro of this logic within the client logfiles, as it's occurring (or after the event).
If you do some spelunking into the logfiles, don't forget to look at windowsupdate.log (the WUAgent logfile), as that can, with the CCM logfiles, paint a more complete picture of the "flow of things".
This does all assume that the client machine is in a healthy and predictable state to begin with.
If there is already some other pending_reboot hiding in the background, or, WUAgent is running with it's own configuration (potentially fighting with CCM), or, it's Win8 with the "Automatic Maintenance" scheduled task, you can get some unexpected behaviour
(but usually that is unexpected reboot, rather than unexpected no-reboot)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Droid Maxx keeps rebooting after software update
Since the upgrade on 11/1/14 to 23.3.24, my droid maxx keeps rebooting. It has done this about 15 times since yesterday evening. Any ideas as to what could be causing this? It is also telling me that I need my GPS on and set to high accuracy mode in order to detect my location. Before the upgrade, I only turned my location on when I used the navigation app. Any ideas?
The Latest update is suppose to get the Phone prepared for Verizon's voLTE it's hard to say how long it will be till all is functioning correctly with the system and the phones but, if your issues continue & it makes the phone unusable then I'd see if you can get another Droid Maxx hopefully one with out the new update..
My Current: Version is 21.11.21. my Maxx is still running with no issues -
Random Reboots after Mountain Lion Update MacBook Pro
Hey All, So I've just installed mountain lion on my macbook pro, However I've been running into an issue of frequent (like 3-5 times per day) crashes. The screen simply just goes black and the computer restarts. Any idea what the issue could be? Here is the panic report attached:
Fri Jul 27 23:21:32 2012
panic(cpu 3 caller 0xffffff7f959aec85): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8126d49000 0x0a5480a2, D0, P3/4
Backtrace (CPU 3), Frame : Return Address
0xffffff8103da2f70 : 0xffffff801421d5f6
0xffffff8103da2fe0 : 0xffffff7f959aec85
0xffffff8103da3070 : 0xffffff7f95aa85b7
0xffffff8103da30d0 : 0xffffff7f95aa862b
0xffffff8103da3140 : 0xffffff7f95db0883
0xffffff8103da3280 : 0xffffff7f95ace75d
0xffffff8103da32b0 : 0xffffff7f959b89e6
0xffffff8103da3360 : 0xffffff7f959b40b8
0xffffff8103da3550 : 0xffffff7f959b52e4
0xffffff8103da3620 : 0xffffff7f96080494
0xffffff8103da36e0 : 0xffffff7f960b0f8b
0xffffff8103da3770 : 0xffffff7f96096638
0xffffff8103da37d0 : 0xffffff7f96096efc
0xffffff8103da3820 : 0xffffff7f960972e6
0xffffff8103da38c0 : 0xffffff7f96097d06
0xffffff8103da3900 : 0xffffff7f96052f31
0xffffff8103da3a80 : 0xffffff7f960942ee
0xffffff8103da3b40 : 0xffffff7f96051a3a
0xffffff8103da3ba0 : 0xffffff8014664929
0xffffff8103da3bc0 : 0xffffff8014665ed0
0xffffff8103da3c20 : 0xffffff80146638ef
0xffffff8103da3d70 : 0xffffff80142981a1
0xffffff8103da3e80 : 0xffffff8014220abd
0xffffff8103da3eb0 : 0xffffff8014210448
0xffffff8103da3f00 : 0xffffff80142195fb
0xffffff8103da3f70 : 0xffffff80142a5ad6
0xffffff8103da3fb0 : 0xffffff80142ced13
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f95947 000->0xffffff7f95c49fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9484d000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f95926000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f95612000
com.apple.nvidia.nv50hal(8.0)[9CD95A4A-FD94-349E-A4B6-FC3B74E197F5]@0xffffff7f9 5c4a000->0xffffff7f95f6cfff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f959 47000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9484d000
com.apple.GeForce(8.0)[91C40470-82BA-329A-A9D7-4C70F28275FD]@0xffffff7f96045000 ->0xffffff7f96107fff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f959 47000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f95926000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9484d000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f95612000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x0000000014000000
Kernel text base: 0xffffff8014200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3064278218033
last loaded kext at 252199433809: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f963a4000, size 229376)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.7.2
at.obdev.nke.LittleSnitch 2.4.0
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.IOBluetoothSCOAudioDriver 4.0.9f8
com.apple.driver.IOBluetoothA2DPAudioDriver 4.0.9f8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleIntelHDGraphics 8.0.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.69
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f8
com.apple.driver.AppleHDA 2.3.0f2
com.apple.GeForce 8.0.0
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.driver.AppleBacklight 170.2.3
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMuxControl 3.2.6
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleIntelHDGraphicsFB 8.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.XsanFilter 404
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleUSBUHCI 5.1.5
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0So, bad news. While much less frequent, the rebooting has returned. Maybe only 3 reboots since my last post but still one is one too many for me! Here is the most recent one:
Wed Aug 1 11:45:05 2012
panic(cpu 1 caller 0xffffff7f8b165c85): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811e6a9000 0x0a5480a2, D0, P3/4
Backtrace (CPU 1), Frame : Return Address
0xffffff80fb5437e0 : 0xffffff800aa1d5f6
0xffffff80fb543850 : 0xffffff7f8b165c85
0xffffff80fb5438e0 : 0xffffff7f8b25f5b7
0xffffff80fb543940 : 0xffffff7f8b25f62b
0xffffff80fb5439b0 : 0xffffff7f8b574883
0xffffff80fb543af0 : 0xffffff7f8b28575d
0xffffff80fb543b20 : 0xffffff7f8b16f9e6
0xffffff80fb543bd0 : 0xffffff7f8b16b0b8
0xffffff80fb543dc0 : 0xffffff7f8b16cac6
0xffffff80fb543ea0 : 0xffffff7f8b100324
0xffffff80fb543ef0 : 0xffffff7f8cc2371f
0xffffff80fb543f40 : 0xffffff7f8cc228e7
0xffffff80fb543f60 : 0xffffff800aa3dcae
0xffffff80fb543fb0 : 0xffffff800aab2677
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f8b0fe 000->0xffffff7f8b400fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8b06f000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f8b0ea000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f8b0a7000
com.apple.nvidia.nv50hal(8.0)[9CD95A4A-FD94-349E-A4B6-FC3B74E197F5]@0xffffff7f8 b40e000->0xffffff7f8b730fff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f8b0 fe000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8b06f000
com.apple.driver.AGPM(100.12.69)[FBC949AC-F94D-39CD-96A0-C6F121EA7546]@0xffffff 7f8cc21000->0xffffff7f8cc30fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8b06f000
dependency: com.apple.driver.IOPlatformPluginFamily(5.2.0d16)[41B414E9-EC1E-3724-A158-14FD4 8712B0C]@0xffffff7f8bba3000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f8b0ea000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f8b0a7000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x000000000a800000
Kernel text base: 0xffffff800aa00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 32230527925368
last loaded kext at 11793233329530: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f8ce35000, size 229376)
loaded kexts:
com.Apogee.driver.EnsembleFWOverideDriver 1.4.4
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleUSBCDC 4.1.21
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.IOBluetoothSCOAudioDriver 4.0.9f8
com.apple.driver.IOBluetoothA2DPAudioDriver 4.0.9f8
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2
com.apple.driver.AppleHDA 2.3.0f2
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f8
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphics 8.0.0
com.apple.driver.AppleMuxControl 3.2.6
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelHDGraphicsFB 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.XsanFilter 404
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBUHCI 5.1.5
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Any ideas what is still causing the problem?
Thanks! -
3GS randomly reboots after 5.0.1 (WDT timeout)
Hi all,
I have since a few months a 3GS which was in 4.x, and never had any problem of any kind.
I upgraded to 5.0.0 when this released was issued, no problems while upgrading, and although I noticed my battery lasted less, I had no major issue.
When 5.0.1 was released, I was happy to notice it addressed some battery issues, so I quickly updated my 3GS.
Since the first 5.0.1 I experienced 3 to 5 minutes constant hard reboots, ie after 3 to 5 minutes, even while doing nothing, the iphone powersoff and on (apple logo) and reboots, forever. (battery charge was >85%)
If I removed the sim, or put the phone in airplane mode, the reboots disappear.
I then tried a restore from iTunes, thinking an app may be the problem, and after the restore, I had no single reboot ... for 3 days !
One afternoon, It started rebooting every 1 to 1h30 hours...it did so 5 times that day. And after these 5 times, no single reboot for 3 another days.
Last night, to try some battery tests, I let it drop to 5% battery charge, and switched off, then switched on. Since then, 3 minutes systematic reboots.
I had to put it on airplane mode to prevent this.
I noticed the reboot always causes a "panic.plist" log in the event logs, which error is a WDT timeout (the log enumerates tens of processes and is truncated...)
The number of applications in use at the moment is not changing the behaviour, I can have 20 open apps or nothing, the phone reboots.
I'll try another restore, but seems a weird issue, with the carrier or when the phone tries to hangup on a cell..
If someone has any clue ?..I also having exactly the same problem as what you described (panic with wdt timeout....) The reboot seems to be random. Airplane mode with wifi on is okay (no reboot).
However, I noticed I have this problem 2 days ago while I still using ios 5.0. Then I install 5.0.1 and restore my data from icloud backup. I did not get any reboot while the phone slowly restore my 1000+ photos from icloud until it completed 900+ photos. Then it start to crash again and again and again. Now, I swtiched to airplane mode and it seems to be okay. However, we should be able to make/receive a call with iphone, right? It's not ipod touch.
I'm from Thailand. Carrier is AIS. Nothing to do with Orange. My phone is 3gs unlock. -
Nokia Lumia 1320 random restarts after Denim updat...
Dear Microsoft / Nokia,
I am writing this forum post because my nokia lumia 1320 is suffering some problems. Since the update, the phone is restarting itselve randomly.Today, the phone restarted itselve 3 times already, which was the provocation to send you this message.
I think it is a problem resulting from the recent Lumia denim update, before the lumia was significantly more stable.
The phone was factory resetted after the lumia denim update (1 week ago), and today i also performed a soft reset, without any results. (still random restarts).
Furthermore i noticed that sometimes the phone is unresponsive when i push the powerbutton, to unlock the phone.
My phone is on 8.10.14219.341, firmware: 3058.50000.1424.0001 (it is the Country variant from the Netherlands).
Hopefully there is a way to fix this problem,
Thank you in advance,
Wouter van Buul
Ps. I am not sure if this is the right place to report bugs?!This is a user to user forum where we try to help each other, so reporting bugs is not the purpose of this community, that should be done direct to your local Microsoft Mobile support. However your problem is not a bug, just a technical issue with your handset and we can try to help.
Have you checked that all your system apps are up to date after the Denim update ? The easiest way to do that is from settings > applications > store > check for updates. If everything is up to date, I would do the following troubleshooting if I had this problem:
1.Remove the microSD memory card temporarily and monitor whether the reboots continue
2. Get a new replacement SIM from your network
3. If none of the above works, the next step would be a hard reset (settings > about > reset my phone), but since you say you have already done it, you can try a complete full reinstall of your firmware using the Software Recovery Tool. Please note this will completely wipe you phone, so a backup is highly recommended. -
Q10 stuck at reboot after software update - PLEASE HELP
Hello
I was checking for software updates for my Q10 yesterday and was informed that there is a new update
I clicked on download and install, and it asked me to reboot when it was done. After that it loaded very slowly until it reached 99% 6 hours later and it remained like that for 12 hours
What I did this morning was remove the battery and sim card and I reinserted the battery, the same thing happened again and it is moving very very slowly
Can you please help?? I would rather find away in which I do not loose my BBM contacts since I have not backed up my phone...are the contacts stored on my blackberry ID or will I loose them if I reset the phone?
Thank you very muchIt finally powered on after 3 battery pulls, but now it does not make or receive calls (((
Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
I appreciate your help
Maybe you are looking for
-
[CS3 - Win] Smart Guides not showing up when Snap To Grid enabled
Has anyone else encountered this bug? AI CS3 13.02 Smart Guides are turned on, but hovering over items does not show the cyan hints, snapping to anchor points / paths etc does not work. This only occurs when Snap To Grid is enabled. If you then go an
-
Can I create a Submit Form button that allows a choice of who to submit it to?
I have some paperwork that all new hires need to complete and then send back to their specific HR representative. Is there a way to allow them to choose which email they want to submit their form to? We're dealing with blue collar workers that aren
-
Pass a parameter to Surikogiflex client
Hello all, I'd like to know if it is possible to pass a parameter to Surikogiflex client, to be able to tell it to open a certain story. For example, I wonder if it is possible to have in an html page a link like <a href="localhost:8400/suribachi/cli
-
How to encode a string containing HTML
I have a string which contains HTML tags. This will be written to file so i need to encode it i guess to ISO-8859-1 Please note: i am using JDK1.2.2 My code is bytes = new byte[(int)rs.getString(k).length()*4]; desc = new String(bytes, "ISO-8859-1");
-
For some reason I am having trouble with windows XP recognizing the player. It sayes that their are no drivers installed for this device. Any help is appreiciated. I've downloaded the new explorer and updated drivers. Thanks Scott