Droid Razor - having trouble with camera focusing
Is anyone else having trouble with their camera focusing? A lot of my pictures come out blurry and out of focus. Sometimes, it's like my camera focuses and then looses it as it snaps....am I doing something wrong? Anyone?
And I HATE the take button....wish it was on the top or something instead of on the screen.
Are you using the stock camera app? There's a couple of things to be aware of. Make sure the focus square has turned green so that you know it's ready. You can change the focus point in the stock camera app by touching anywhere on the screen. Also, I have not found the zoom to be very useful - the pics are almost always blurry. It's a digital zoom so imho you're better off to not use it and just crop the picture yourself. It's the only thing I don't like about the camera/software.
If you really hate using the button to take pictures, try another app like Camera ZOOM FX. Many people prefer it to the stock camera app and there is a place in the settings where you can set it so tapping anywhere on the screen will take a picture, as opposed to being the focus point as it is in the stock app.
Finally, I know it sounds basic, but be sure you have adequate light and try to not flinch when you press the take button. The phone is so small that any movement like that will likely cause blur. The other app I mentioned also has a stabilization setting, where it won't take a picture unless a certain degree of stabilization is present so you might also like that. It does not have a video function however.
Hope that helps.
Similar Messages
-
Hi having trouble with camera roll photos - can not see them in i tunes
Hi having trouble with camera roll photos - can not see them in i tunes. Is adobe photoshop the only program I can use?
You don't see them in iTunes. In theory your computer should see the device as a camera and you should be able to transfer the photos in the same way as if you'd connected a 'proper' camera to your computer (this only applies to photos taken with the device or saved from emails/websites etc, it doesn't apply to photos that were synced from your computer). There is some help/guidance in this article for transferring photos to your computer : http://support.apple.com/kb/HT4083
-
Having trouble with camera profiles in LR3
Anyone having trouble with accessing the camera profiles from the drop down menu in the develop module/camera calibration section of LR3? The only choice I have is "embedded." After I created a custom with passport color checker it now only offers "profile" as a choice. ANy thoughts?
Thanks,
TomOkay, that is different. I have seen a similar discussion in another thread (I think) in the Lightroom forum. It might have been this one. It seems to have been specific to Canon cameras. I don't have an answer. Just one question, however. Are you using standard CR2 files, or are you using the sRaw format? As I was reading the other thread, I was wondering if that could have been part of the problem.
-
Help! Having trouble with camera app after update to iOS 5.1.1
I'm having a big problem with my Itouch. I've never jailbroken it or any of that crap. Here's the deal. I just updated to 5.1.1 and I tried to record a video but whenever I press the record button it starts recording but can't press it again to make stop. So, press the menu button then I tried going back to the camera app then I hit record now this time it just freezes!!!!!
My IPhone 5 camera is locked after the new update!
-
I'm having trouble with video imported from my camera memory card.
I'm having trouble with video imported from my camera memory card.The video breaks up and pixelizes when it's directly imported from the memory card. That makes the video useless. Why does this happen? It doesn't do that in any other video editing software. Thanks for the help.
More info please:
Type of camera?
Was the card formatted in the camera doing the shooting?
Type of files the camera is set to record?
Al -
im having trouble with my email. usually i drag emails i want saved to various folders. recently, some of the folders have changed their appearance - looking like a camera body, and less like a folder. these icons seemed to be locked as well, so i can no longer open those folders. help please?
Ah, now i see that the folder has an icon on it - like a "settings" icon - sort of a wheel
-
I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?
Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread. -
i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?
Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
Tom Wolsky
Re: How to import 60p footage
Aug 17, 2011 12:40 PM (in response to ptburnett68)
Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo -
I am having trouble with Blackberry Desktop. With this o...
I am having trouble with Blackberry Desktop. With this other issues came up. I been trying to get help with this website but it is impossible. I need help now and can't seem to find someone to call. Where can i call? the internet help is worthless to me and i am really frustrated.
Hi there!
There are a multitude of questions/answers to go through to help you out, but those won't work unless you come to the forums and register an account. Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I am having trouble with my links/websites having images attached to them. The place where the image should be is blank. For example, AARP has an A for its image. My storage website has a blank broken box where the image should be. I forgot I had trouble and had to reset Foxfire, this problem occurred after that reset.
cor-el,
Mixed content normally gives the world globe image, unless you are using a theme that uses a broken padlock instead. Maybe the gray triangle means invalid? I came across that in a few themes (what is invalid was not made clear), but those were not using triangle shapes to indicate that.
I came across that mention in one of the pages you posted:
* https://support.mozilla.org/kb/Site+Identity+Button
I cannot attach a screenshot because I have not seen a triangle of any kind in my address bar. -
Please Help? Having trouble opening camera raw files. Already downloaded Camera Raw update. I have a pc.
If the camera is fairly new then the version of ACR you have with CS5 won't be able to read those file. You'll need to upgrade to a newer version of Photoshop or use Lightroom 5.
Once a new version of Photoshop comes out Adobe does not support updating ACR from the older version of PS. -
I am having trouble with a form, won't tab to 2nd page...
I am having trouble with a form I created in Acrobat Pro 10. I created tabs etc, they all work wonderfully in Adobe, but once I uploaded it onto the web-based program for other users, the tabs only work on page 1, I have to click on page 2 to keep tabbing through. It won't tab into it. Any advise? Also, when the users open it it opens in the web.
1. The library is separate from the application, so re-installing shouldn't cause an issue with the actual photos. But it would be foolhardy in the extreme to do anything without first backing up.
2. Often these issues are caused by a damaged Library, so reinstalling doesn't change much.
FWIW
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Alternative approach:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Having trouble with in app purchases after ios7 upgrade?
I'm having trouble with in app purchases after ios7 upgrade
I'm having the exact same problem. Unfortunately, I can't tell you what is causing it, but I can tell you what it isn't(at least in my case). I made an in app purchase yesterday using a MasterCard I had linked to my account with no problems. This morning, my card from my new bank came in so I switched it over(American Express), and all of a sudden can't make IAP. I thought maybe there was an issue with the card, so I tried it out on a .99 app, and it worked no problem. So I got with tech support and they had me reset all of my phone settings -_-, then my network settings. No change. I tried restarting the phone obviously, closing the App and trying again, no luck. They suggested I call my bank and make sure the address I had on file for the card matched what I supplied for my Apple account, and that didn't fix it either. I tried IAP on two different apps and it was the same, could not connect to App Store error. I'm still trying to figure it out, and I'm sorry I can't be of more help, but I hope I at least save you some trouble of trying these things. If I find anything out I'll let you know.
-
Hi, having trouble with my iMac on startup. Background screen appears, but no icons,
Having trouble with my iMac- on startup, the background screen appears, but no icons. The spinning beach ball appears for quite a long while, then when the icons finally come up, when I open a finder window, the only icons to appear are the Network and Macintosh HD icons. I've tried to repair disk permissions: this came up with heaps of errors, which it then fixed, but the original problem remains.
Any suggestions on how to fix this?
thanksPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Same problem(s) in safe mode?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
I'm having trouble with the MTS MT2S convertor.
I’m having trouble with the MTS MT2S convertor. On my video camera (I have a Panasonic HC-V500 full HD 1920x1080) I’ve recorded in HD and when I use the MTS convertor to change the file type I select the HD option it’s a quicktime .mov file type and when it has finished converting the quality of the video goes to a lower quality and the colours aren’t vibrant like shown on the original recording on my camera. It also looks slightly grainy. So my question is which HD file type should I be choosing? As I no there’s a few but unsure which is best to use. I have also changed quality to original and didn’t make a difference on the quicktime .mov file type. I wasn’t sure if theres anything else on there I’m meant to be adjusting? As the software didn’t come with any instructions on how to use it. Just to mention i upload my videos to youtube so i want them to be in HD but i use iMovie as my editing software before i upload to youtube and i no avi file format isn't supported in iMovie.
Its a 64 bits.
Maybe you are looking for
-
NULL oracle_process_id in FND_CONCURRENT_REQUEST table
Friends I am having a strange issue in Production environment. and it has happened twice in the last 1 months. Issue -- few custom jobs run long but when I try to see the corresponding SQL, it has 0 hash value in the FND_concurrent_request table. All
-
Getting bean from request scope
Hi, I am new to JSF and unfortunately I am running into a problem that I am not entirely sure about. I look in other forums and what I am doing looks right but I am not getting the desired result. In my faces-config.xml file I have a managed bean def
-
How can I remove Yahoo trojan?
Several time an hour, the screen below pops-up, asking for my Yahoo email password. Once, when I did submit my password, a spam email was immediately sent to all of my friends. I changed my password but can't get rid of this popup. I don't know if it
-
Is ist possible to start a vi in a vi sub panel?
hello, is it possible to start a vi with his functionality in a sub panel? or is there another way to do this? markus
-
Color correcting wrong white balance
I apologize if this question is simplistic in nature but I am still an amateur editor trying to fix some of the videos I have done. As a scuba diver, I am constantly white balancing underwater. However, occassionaly, I while white balance where my s