Droid Razr HD won't connect to anything with cellular data. Also won't show messages correctly. Notification pops up, but no message to be found.

My Droid Razr HD won't connect to anything when I'm using my cellular data. Also, when I receive messages, a notification pops up but no message is shown at all.

    Let's get your phone connected to everything with cellular data Larissaadele! We need some more clues to explore options to resolve! When did this connectivity issue start? For the messaging issue outlined in your post, are you referring to text messages or voice mail messages? What is your phone's software version?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Similar Messages

  • Time capsule first said the back up was delayed no it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address help!

    time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!

    Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??

  • On my windows 7 machine, itunes won't connect home sharing with apple tv

    On my windows 7 machine, itunes won't connect home sharing with my apple tv.  This problem started about two itunes updates ago.  Any thoughts?

    Try a search of the forums or the "More Like This" section to the right.
    Also might have better luck posting to the Apple TV forum.

  • I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via bluetooth whenever I try even though both shows that the devices are discoverable. I need help!

    I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via Bluetooth whenever I try even though both shows that the devices are discoverable. I also tried connecting them with my Bluetooth enabled laptop but it also didn't worked. Because of the Bluetooth not working I also can't enable airdrop.

    What model iPad?
    What model computer and OS version>
    AirDrop requires:
    What you need
    To share content with AirDrop, both people need one of these devices using iOS 7 or later, or a Mac with OS X Yosemite:
    iPhone 5 or later
    iPad (4th generation or later)
    iPad mini
    iPod touch (5th generation)
    You also need to turn on Wi-Fi and Bluetooth. If you want to share with your contacts, sign in to your iCloud account.
    Learn more about using AirDrop to share with people using a Mac with Yosemite.
    Use AirDrop to wirelessly share content - Apple Support
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    *The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
    For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
    Otherwise you need an app to pair via BT one iOS device to another iOS device. There may be apps that allow pairing with a Mac computer. The iOS devioces do not have the BT profiles necessary natively to pair with a computer or another iOS device except for AirDrop

  • TS1398 My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now. Nothing has changed.  I've gone through all of Apples suggested troubleshooting guides but it still won't work! Help?

    My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now.
    My daughter also has an iPad and an iPhone and these too won't connect either (use the same iTunes account)
    Nothing has changed since this morning,  I've gone through all of Apples suggested troubleshooting guides but it still won't work!
    Help?

    p.s.  I just signed out of my apple id on daughters iPad and tried to create a new apple ID and still got the message CANNOT CONNECT TO ITUNES STORE......    
    so is this a problem with apple rather than my devices? Just seems weird that all our apple devices are doing this this afternoon when they were just fine this morning.......
    P.P.S  Just got a text from a friend with iphone and ipad......they are having same issue so at least I know it's not just me, so what's going on here APPLE?????

  • I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    Your TV hasn't entered some odd picture in picture mode has it with  two 'inputs' side by side?
    AC

  • HT1695 In case any Wi-FI is available and if I choose not to join wi-fi, on iPhone 5 it does not connect to my 3G cellular data network but it connects to 2G data network forcing me to lower speeds in Wi-Fi enabled ares

    In case any Wi-FI is available and if I choose not to join wi-fi, on iPhone 5 it does not connect to my 3G cellular data network but it connects to 2G data network forcing me to lower speeds in Wi-Fi enabled areas.

    This might help
    http://support.apple.com/kb/ht3406

  • When i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this potion. Please give me some solution.

    when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.

    Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
    I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else.

  • Time Capsule won't connect to anything

    I was using my time capsule for about a year and never had an issue until I moved. Now that I'm in the new house, no devices will connect to it except my MacBook Pro. Hard wired LAN or over WIFI my smart TV won't connect neither will my PlayStation or my iPhones or iPad. Nothing. Again... My computer connects over WIFI but nothing else. And nothing works directly hooked up from the Time Capsule to any device via LAN cable.

    TC needs a full factory reset when put in a new network.
    It remembers far too much from the previous setup.
    So.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Do do a new setup .. if the modem you have is cable pure type modem.. the TC must be in bridge.. you MUST turn off the cable modem for 20min for the MAC address capture to time out.. then power up the modem and power up the TC which is in DHCP + NAT mode.
    If the modem is a router.. put the TC in bridge mode..
    If you run into troubles give us more info.
    what modem.. make and model and type.
    What model is the TC.. A1xxx from the base.
    What version firmware?

  • Wi-fi icon shows full signal - iphone 4s won't connect to anything?

    Hi,
    My iphone 4s shows that I am connected to wi-fi and have a full signal, however it is not actually connecting to anything; safari, apps, can't send email, can't 'see' phone on my mobile phone tracker etc.
    I tried reseting the network connections, which did solve the problem but literally only for a few minutes. So frustrating.
    Has anyone got a permanant solution to this problem?  All relevant software is bang up to date.  The phone itself is brand new, only 1 day old.
    Please help!

    Try rebooting the router. Just pull the power for a few seconds, plug back in, wait for the router to settle and see if you still have the problem.

  • I have an old Airport Express that won't connect/set up with Yosemite. Any help appreciated

    Hi, as the title suggests I have an old Airport Express that I have always used wirelessly to connect to my hifi but now that I have upgraded to Yosemite it won't connect via Airport Utility  6.3.4 and Yosemite won't let me use Airport Utility 5.6  Seems I'm stuck between a rock and hard place! Ethernet is no use as the hifi is in another room. Yosemite is running on an iMac and is connected wirelessly to Virgin Broadband. Thanks, Alex.

    If the AirPort Express is very old, such as the original 802.11b/g - only models A1084 or A1088 you will need a commensurately older version of both AirPort Utility and OS X to configure it. Those models were discontinued about seven years ago and support for them is gone. Ethernet won't make a difference anyway.
    You may find instructions or links to web sites with instructions to modify OS X in an effort to circumvent that restriction. I cannot emphasize enough just how bad an idea that would be.

  • TS3367 Why won't facetime work using Verizon cellular data? It keeps telling me I don't have a wi-fi connection

    Why won't my facetime work using the Verizon network? I don't have a separate Internet connection, so I bought the iPad 2 with the cellular data installed...every time I try to use facetime, it tells me that I need to connect to a wifi network & that there is no network connection. ?

    The option to use Cellular for facetime is not available with the iPad 2. See below for a list of features.
    http://support.apple.com/kb/HT5457

  • Iphone won't connect to wifi due to incorrect password,even though it is correct! Help?

    So my Iphone 4s has been having problems with the no service error now and again so I decided to reset the network settings to try and fix it. Now since this reset,my iphone refuses to connect to wifi even though the password I'm entering is 100% correct!  I keep getting the 'Incorrect password error'.
    I've resetted the router and reset the wifi network, rebooted my phone,performed a hard reset but there is still no fix
    I have many other devices connected to my wifi without any problems. 3 computers, an ipad, android tablet and other iphone.
    My phone is jailbroken on 6.1.2 so I don't want to have to restore my phone.
    My phone will connect to wifi with wifiFoFum but as soon as my phone goes to sleep it disconnects so its rather annoying!
    I hope you can help

    Well are you absolutely certain you know your password.  This is a risky troubleshooting step because it could kind of make the situation worse, you should try to forget the network on your computer and really make sure you can enter your password again on another device.
    It might just be a capital letter or something that is tripping you up. 
    If you are having an actually wifi hardware issue it doesn't pop up with an error about an incorrect password.  Theres other errrors for that.  Incorrect password errors only pop up because there is an issue with the password

  • My htc desire 612 won't connect via bluetooth with my buick encore

    I'm having trouble connect the HTC with bluetooth to both my car and my garmin vivosmart.  Any ideas?

    It will not connect because transfering data to other phones via bluetooth is not supported on the iPhone.

  • Zen Micro won't connect to computer with WMP 10 or higher instal

    I've searched high and low for what could be causing this problem and nothing seems to be working. I just recently formatted my hard dri've. Before I formatted it my Micro was working just fine with the computer and I had WMP installed. After the format the computer won't load the device with WMP installed, so I rolled back to WMP 0 and it still wouldn't load the device. Then I rolled back to WMP 9, that comes with Windows XP, and it loads it perfectly fine. I've looked for plug-ins and hotfixes and everything else and absolutely nothing is working. Everytime I plug the device in with WMP 0 or loaded it brings up the "Found New Hardware" wizard and then it times out when trying to load the MTP driver. However, I plugged it into my friends computer and it loads perfectly fine. The firmware on the player is the latest because I had to update it for WMP before.
    The thing that I don't get is why it has trouble loading the MTP driver with WMP 0 or installed but when WMP 9 is what is installed it loads it right away with no problems. Does anyone know what I can do??Also, since I formatted the hard dri've all my music is currently backed up on the Micro so I don't want to have to format it. And as far as I know WMP is the only way to get all of the songs off of the Micro, if there is any other way to get all of the songs off that would be helpful too. I can get most of the songs off just by drag and drop, but I can't get all of them for some reason. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!! thanks

    I have had this problem creep up on me lately, but it doesn't happen every time though. I've been able to get around it by trying two or three times to reconnect it, but a couple of times it got right stubborn. In that situation, it seemed restarting my PC did the trick.
    Not sure if that helps, but...

Maybe you are looking for

  • Unable to configure ODBC data source through odi

    Hi, Let me explain the architecture first. We have three machines 1. OpenVMS machine on which connx server is running for RMS files, say SRC 2. Windows machine on which ODI Data Studio 11.1.1, Say WRKSTN, This has connx client installed 3. Target is

  • How can I get help canceling my subscription?

    Is there anyway I can talk to a "Live" person from Adobe?  I accidentally double charge myself in purchasing a PDF to Word Perfect software.  If there is an 'English' speaking person from Adobe who can help me, please email me at [private information

  • How do you put a flashdrive into a computer? What if it's not working?

    How do you put a flashdrive into a iMac desktop? What if it's not working?

  • Sharepoint grid view

    I'm looking to give our company Intranet an overhaul and wanted to create what I can only describe as a grid view in SharePoint which looks like this:Sorry for the poor quality as I took a screenshot from a youtube video, my knowledge of SharePoint i

  • SD card not being recognized

    How do you I get my Tungsten E2 to recognize an SD card?  I have tried it with a standard SD card but it still says there is no card in the slot. What do I do? Post relates to: Tungsten E2 Message Edited by FNG1 on 01-28-2010 09:31 AM This question w