Droid Turbo talk and surf at the same time

Hello,
So I just brought my Droid Turbo home and have started testing it. I bought it knowing that it only had one antenna, but I had read that a new update was pushed that allowed for simultaneous talk and surfing. My software update is up to date (21.44.12.en.US), and the notes on the update even mention this feature was included in the update (why it is a "feature" and not a standard is beyond me). I just tried it again, and I can't surf and talk at the same time. Can someone explain this issue; is it only possible when using advanced calling over XLTE? The discussions I could find on here were all dated 6 months ago (before the latest update).
Thanks.

Yes, they both have to have Advanced Calling for HD voice to work....but that is not what the OP was inquiring about. You can do simultaneous calls and data with the Turbo with ANY other phone (cell or landline) as long as you have Advanced Calling enabled on your phone. The HD is an EXTRA feature that makes for better call quality if both have Advanced Calling, but I assure you that you can make regular voice calls the same as with any other device, AND use data calling any cell or landline once you have it enabled on the Turbo.

Similar Messages

Why cant i talk and surf at the same time?

Why cant i talk and surf at the same time? Got lost yesterday and while on the phone i couldn't search store web to get the address. Perfect timing to figure this out; when you're lost. This is a MAJOR problem for me and anyone on the go. WHEN WILL THIS BE FIXED??? I will not hesitate to return this phone as im sure all TURBO users feel the same. Someone said the MOTO X was the same way... is it still...why hasn't then been fixed by now? Which now makes me wonder if this wasn't an oversight but something intentional. Why did they hide the fact that they knew this was going on? i should have been told that this capability wasn't available on the TURBO at time of purchase. FIX IT NOW!

ChristiLockridge wrote:
And i've had every DROID since the original with the exception of the Bionic.
Then you have had phones WITHOUT the capability of talk/surf at the same time. If you don't realize this, then you don't(or at least didn't) use it as often as you think. Original Droid didn't have this capability. Droid X didn't have this capability. Droid X2 didn't have this capability. For the most part(there may have been exceptions of which I am unaware), NO Verizon phone had this capability until 4G phones and then ONLY when on a 4G LTE signal. 4G phones on a 3G signal did not/do not have this capability.
ChristiLockridge wrote:
The same as texting, or calling or browsing. This is just a given.
Personally, I check these things on EVERY phone before I purchase. This is just a given.

Will Verizon Stop encrypting sim cards for iPhones so users can talk and surf at the same time?

Will Verizon stop encrypting iPhone sim cards so users can surf and talk simultaneously?

I can prove that this is not the case. I travel abroad monthly and have sim cards for these 2 countries i frequent and i can surf and talk at the same time. The claim that it needs another antenna does not support my findings. Can we be more transparent please. As a costumer i find it highly inconvenient to have to hang up a call with someone just to access an email.
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Talk and surf at the same time

is verizon going to allow talking and surfing the web if so wheni

natureboy229 wrote:
is verizon going to allow talking and surfing the web if so wheni
You will see this with the 4G network that is being developed. According to recent news, they just tested the first simultaneous call and data transmission on the VZW network without a hitch.

Why can't I charge my Samsung 4GLTE wifi hotspot and surf at the same time?

Is the charger too weak to charge the device and surf the internet at the same time?

Works for me, have done it several times since I got mine. Something that is totally useless with the old 3G MiFi after they upgraded it.

Tak and surf at the same time

For those wondering, it can be done while on wifi, I just tried it out.

natureboy229 wrote:
is verizon going to allow talking and surfing the web if so wheni
You will see this with the 4G network that is being developed. According to recent news, they just tested the first simultaneous call and data transmission on the VZW network without a hitch.

Talk and Text at the same time?

Hey everybody. I have a quick question regarding the iPhone 4.
On my current phone, (LG EnV touch/Verizon); I can be talking on the phone, and send/recieve texts at the same time. I do this alot.
Is this possible with the iPhone 4? For example, I'll be talking on the phone with a friend. Another friend texts me. Will I be able to stay on the phone with my friend, and also send a text?
Thanks.

So, you are able to be on the phone with someone, and also send a text message at the same time? Im not talking about pictures, videos, etc. Just basic texting.

Tethering and Voice at the same time

Is there a refence to show what models support using tethering and voice at the same time?

I have the same problem with 2 iPhone 4S. When I'm only using data, download speed on 3G is 5.57Mbps, Upload 1.07Mbps and ping 79ms. As soon as I make or receive a phone call those speeds drop to:
Download: 0.27Mbps
Upload: 0.1Mbps
Ping: 638ms
With these speeds the web browser and all the other apps just keep trying to load or log in but nothing happens. As soon as I hang up, the speed goes back to normal. the problem is non existen while on wi-fi.
AT&T triend to make some changes on the settings of my sim but itr didn't help at all. Just this morning I got a call from AT&T to let me know that the data speed is supposed top drop and that they don't make any promises as to the data speed, that their "talk & surf"propaganda only means that if you are using the internet, you can still receive phone calls....***? I never had this problem with the iPhones, 3G, 3Gs, 4. I asked them that I wanted to speak with somebody higher up or an enginner to discuss this issue but I'm still waiting to hear from them.
The guys at apple were a little confused with this problem (I did reset the network settings but problem persisted, then reset all settings...nothing, then hard reset, restored from back up, deleted everything and set it up as new iphone...the problem is still there...) they asked if I could take the phone to the Apple store so they can run some advanced diagnostics...I'll have to take a road trip (closest Apple store is about 100 miles from my hometown)...Going on 1/5/2012....We'll see....

IP over Firewire and ethernet at the same time?

Is it possible to use both IP over Firewire and ethernet at the same time?
I want to use my TB hard drive attached to one Mac via Firewire 800 to backup another Mac also attached to the same drive via Firewire 800. I can only mount the drive on one machine at a time so I need to share it out to the other Mac. It works great if I set it up to do strait IP over Firewire, with static IPs, but that means I can't connect to the internet because my ethernet connection on both machines becomes the secondary connection method. Similarly, if ethernet is primary then I can't connect via Firewire. Is there a way to set it up so the Macs will know which method to use depending on the IP address?
I am using 10.5.1 on both machines.
G5, 1.8 GHz, 15.GB RAM
MBP, 2.4 GHz, 4GB RAM
Thanks!

Certainly.
In the network control panel I set Built-in FireWire to the top of the service order list, followed by Built-in Ethernet.
Next, I set Built-in FireWire to Configure Manually with the address 192.168.1.xxx and the Subnet Mask to 255.255.255.xxx, making sure the Subnet Mask is set the same on both machines and that the IP address is different on both machines and different from the Built-in Ethernet addresses.
I applied the settings, turned on Sharing on both machines, then mounted whatever shared drives I needed by connecting to the other machine using the FireWire IP address.
Now I am able to share drives using FireWire 800 - which works great when used with Time Machine - and still use my normal ethernet to surf, etc..

Airport extreme wired AND wireless at the same time?

Very sorry for this newbie question. Can i have my iMac wired to my computer with ethernet and wireless at the same time?
If so, what ports to i plug what into?
My guess is modem-wan port on extreme and a cable going wired from the ethernet port on the extreme to the iMac?
Do i need to do any configuring?
Thanks!

The operatibe word here is EXPRESS
To the best of my knowledge the ethernet port on the express is for ethernet IN not out
http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf The pertinent diagrams are like page 20 - 25
Now you can actually do what you are talking about with an extreme.. an extreme can, in theorey operate as an remote/relay taking incoming signal giving you one - four out bound ethernet ports
that info can be found in the manual on setting up a WDS
the only thing to remember is .. the weakest leg controls.. if your wireless signal to the relay is poor. any thing using the relay for access will also be poor
I have found out the hard way about that
hey you can get good price on bulk cat 5

IPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

iPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

Talk to your email provider. They control their servers and what happens to your email.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Droid Turbo talk and surf at the same time

Similar Messages

Maybe you are looking for