Droid ultra wont turn on blk screen and phone vibrates every few seconds

droid ultra wont turn on blk screen and phone vibrates every few seconds

Hello es1040,
The Droid Ultra is an awesome device with a wide range of features to enjoy. We're excited to partner with you and get your phone on so you can enjoy said features. Is there any physical or liquid damage on the device? Also, is the device charged? I would suggest doing a reset to get the phone back to normal. Here's a link on how to do so.
http://www.verizonwireless.com/support/devices/knowledge_base.html/83029/
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Pro won't start. Instead get a black screen and a beeping every 2 seconds. LIght at front right corner of keyboard flashes in sequence with beeping.

Pro won't start. Instead get a black screen and a beeping every 2 seconds. Light at front right corner of keyboard flashes in sequence with beeping.

If it is giving a single beep every two seconds, then it is not seeing any of the memory. You could try taking the back off, remove the memory module and reinsert to see if that corrects the problem. Or just take it to an Apple store genius bar and have the techs do that for you.
If you are uncertain about working on the memory modules, you can find on-line videos for doing so at OWC, http://www.macsales.com where you can see the procedure for your year, make and model of MacBook Pro.

Why is my 24-inch LED display flashing black (and sometimes scrambles) every few seconds?

I have recently upgraded to a new iMac: 3.4 GHz Intel Core i7. 4 GB 1333 MHz DDr3. AMD Radeon HD 6970M. 1024 MB. Mac OS X Lion 10.7.4. I have it attached to a 24-inch Cinema Display.
Before I switched to my new iMac, it would blink black a couple of times a day. This was going on for a LONG time, but was not a big deal. However, now that I have switched to the new iMac, it is every few seconds. And it has now added the "scrambled" screen to it's repertoire. Fun. And, as I am typing this...it just went black and has not come back on.
I've read a few threads on this happening, but haven't found any substantial evidence as to what is causing this. It's beyond annoying. Has anyone learned anything new?

Okay. Murphy's Law. As soon as I posted this, I found an answer (hopefully!). My situation fit the criteria at http://support.apple.com/kb/TS4045?viewlocale=en_US and I installed the update and so far, so good. I'll keep you posted.

T500 wireless connects and disconnects every few seconds

The machine has the Intel 5100 adapter in it, and runs W7 x64. There are numerous other devices using wireless in the same house, including two T61ps, which do not have this problem.
The T500 is using the latest Access Connections for W7, and the latest Intel drivers (the machine is 10 days old, and is fully updated using Lenovo System Update and Windows Update. Not much 3rd party software yet due to this and another problem with the T500.)
Every few seconds, the wireless will disconnect, then reconnect immediately. I have tried turning off power management for the wireless adapter, including telling Windows not to power it off for power savings. This occurs running on AC power, haven't tried on battery. (This is irritating enough as it is, but it makes W7's Windows Explorer keep moving things up and down in the display as the network items disappear and reappear.)

Hi Graham,
Try increasing the roaming of your wireless card from aggressive to low and power output to maximum in the power management option.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

How do I count and display events every few seconds and then convert the counted values into events per minute? (for a heart rate monitor)

Hi everyone,
I'm building a heart rate monitor as a final year project with my lab partner using the NI USB-6009 and Labview 2009. We have managed to obtain a signal using a photo transciever, smooth it out and count the events, however the count is incremental.
We wish to count the number of pulses we obtain for a few seconds (5-10 for example) and then use this value to obtain a pulse rate in beats per minute (e.g. 10 pulses in the first 10 seconds would give an estimated BPM of 60 etc etc).
Does anybody have ides on how we could implement this? We have tried timed loops, elapsed time VI's and other things but nothing gives us what we need.
Thanks in advance for any help that is offered.
Jeshua Graham.

We are very new to Labview. We are taking a raw signal from our DAQ and then using VIs to filter and then trigger counts on rising edges. I have attached our vi file to this post for you to look at (I hope that is what you mean by code).
Attachments:
TCRT-1010DAQ_jeshua1.vi ‏367 KB

My iPhone 4S Wont Come on, but makes the charging sound every few seconds

I have an iPhone 4S and the device wont power on, but when i plug it in, it repeatedly makes the sound of when you plug in your device to a power source. What is this and How do i fix this?

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

Firefox takes time loading and keeps stopping every few seconds, but only in the last week

I have had updates for Windows and wonder if there is a clash between the two. I also seem to be getting more errors thn I ever had. I have tried uninstalling FF and reinstalling it and the results are still the same. It is damm annoying to have had such a great website that just seems to have malfunctioned overnight 25 April seems to have been the date, anything changed at your end

hey try a smc reset
EDIT (smc reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.)
if that doesnt help look at replacing the batteries in your magic mouse and try it then
if the issue still presists take it into a apple store and they can test it there to see whats up

The screen on my MacBook Pro Retina has horizontal lines and has a brightness flicker every few seconds since june 2013 upgrade of airport utility.

The screen on my MacBook Pro Retina has horizontal lines and a flicker every few seconds this happened after this weeks Airport Utility 6.3 upgrade.

Hi John,
I would take your machine into a Apple service center. Its highly likely a hardware issue. The most likely issue being the display has failed. If there is no external damage to the machines display they will replace the whole display under warranty for you.

Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

hi my
iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
thanks

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

My iphone wont turn on, the screen is just barely lit and has a greyish appearance; plus when i plug in my iphone to my macbook pro it doesnt show up in my itunes

my iphone wont turn on. the screen is just barely lit and has a greyish appearance; plus when i plug in my iphone to my macbook pro it doesnt show up in my itunes. what do i do?

http://support.apple.com/kb/ht1808

My ipod 5 wont turn on the screen will dim and then it reboots but it keeps happening again

my ipod 5 wont turn on the screen will dim and then it reboots but it keeps happening again

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

Ipod touch wont turn on i tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Droid X wont turn on

My Droid X wont turn on after my battery died. I plugged it into the wall outlet over night and it still wont start. I have pulled the battery and the sd card but still cant get it to turn on. I have tested the battery and it is ok
Any ideas?

Cody21 wrote:
Interesting ... what does that actually do @Wildman?
Sorry had phone issues that took me offline for a bit....
The reason they say to remove the battery and leave it off is to allow the device to discharge the stored power that the device reserves to the system, on some systems if you pull the battery and then attempt to power the device this stored energy will be dispersed because it is recieving the signal that you want the device to power up and send the remaining power to the system to try to start rhe device but since the battery isnt there it will simply just deplete the stored charge faster..
This also works on PC to remove any stored power before removing it from a case, think of it as the same thing as removing a desktops backup battery and then switching the jumper on the board, it causes a quick pulse of power left in system to be released.

My ipod touch wont turn on the screen is balck i tried connecting it to my computer but it wont work.. Can anyone help me ?

My ipod touch wont turn on, The screen is black and i tried to plug it inot my computer and it still wont turn on.. Can someone help me ?.

After charging for at least an hour I would try in order:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try restoring the iPod via iTunes. You may have to place the iPod in recovery mode for iTunes to see the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Making an appointment at the Genius Bar of an Apple store

Droid ultra wont turn on blk screen and phone vibrates every few seconds

Similar Messages

Maybe you are looking for