Droid X - - - Freezes ten seconds after turning it on

I turned my phone off to charge it, and a few hours later when I turned it back on, it just froze. It wouldn't let me do anything. I have tried to reset it completely thinking that it was something that I downloaded, and it won't even let me do that. I do not know what to do or how to fix this problem. Any suggestions??

@upstateny315_37040
Let's thaw out your Droid X! Have you tried removing and reinserting the battery http://bit.ly/W6tPiQ? Also, when trying to reset the device, if you're unable to complete the reset following the preferred steps, try resetting following these steps http://bit.ly/UsGS8F. Let me know how this works out for you. Thanks!
AnthonyTa_VZW
VZW Support
Follow us on Twitter @VZWSupport

Similar Messages

Possible water damaged ipod shuffle, turns on and plays music, but have 3 seconds after turning it on to use buttons then they all lock up

possible water damaged ipod shuffle, turns on and plays music, but have 3 seconds after turning it on to use buttons then they all lock up

I think that you need to get a new one. I got mine at http://www.prizerebel.com/index.php?r=1552886

My MacBook Pro Retina freezes 30 seconds after Startup and the fan constantly makes noise. How do I fix this?

My MacBook Pro Retina freezes 30 seconds after Startup and the fan constantly makes noise. How do I fix this?

Have you tried:
http://support.apple.com/kb/ht1379
and
http://support.apple.com/kb/ht3964

Adobe Acrobat Pro 8 freezes 5 seconds after launch

We have installed Acrobat pro on a windows xp machine. Acrobat seems to freeze about 5 seconds after we launch it. Someone told up to delete the autoupdater plugin folders on the PC but this didn't seem to make any difference. Any help would be greatly appreciated.

Good Morning,
I talked with customer care this morning and they tell me that this is not an deactivation/activation issue since my application isn’t launching correctly. They gave me a meaningless document to troubleshoot launching issues with the suite. It seems that all other applications in the suite launch fine like photoshop, illustrator, etc. It is only acrobat that hangs on launch. However, I did notice that when I try to close out of the other applications like illustrator, the application will hang and I will actually get an application hang message in the event viewer.

[Solved] Screen freezes few seconds after logging in.

Hey there.
I'm looking for some guidance if possible.
I installed Arch in an external hard drive to test out the compatibility with my laptop (a LG P1-J331P > http://pastie.org/8548089 ) with an ATI Mobility Radeon X1400 video card. All following the beginner's guide [https://wiki.archlinux.org/index.php/Beginners%27_Guide] and relevant wiki for the external/usb device installation [https://wiki.archlinux.org/index.php/Usb_installation].
Running arch with "nomodeset" on kernel parameter, it runs normally, except that the screen resolution was fixed at [email protected], though it should be maxed at 1280x800@60.
When "nomodeset" is set:
$dmesg | grep radeon
[ 10.859500] [drm] VGACON disable radeon kernel modesetting.
[ 10.859507] [drm:radeon_init] *ERROR* No UMS support in radeon module!
Without using "nomodeset", the system detects correctly the screen resolution but it freezes few seconds later after logging. Can't Ctrl+Alt+F1.
Tried:
- added "radeon" to MODULES array in the mkinitcpio file. And run the subsequent "mkinitcpio -p linux";
- created a "/etc/rc.d/rc.local" file with contents:
modprobe -r radeon
modprobe -r drm
modprobe radeon modeset=1
- tested "radeon.pcie_gen2=0", "pci=nomsi", "noapic" and "acpi=off" to the kernel parameter.
- created a "/etc/X11/xorg.conf.d/10-monitor.conf" file with contents: http://pastie.org/private/bhcbfvs3zvplvspwamxa2q
Video card drivers installed: mesa, xf86-video-vesa and xf86-video-ati.
lsmod > http://pastie.org/private/orfrp0qg8kijqwuvrrxqag
uname -r > http://pastie.org/private/u89igykam0slvnv2ffhhpq
lspci | grep VGA >
dmesg | grep radeon >
journalctl --since=today >
cat /var/log/Xorg.0.log > http://pastie.org/private/thgrsplegancpggsfsbjlw
top -b > http://codepad.org/iojWRb9U
Any advice for this newbie would be appreciated.
Last edited by T-Cypher (2014-03-11 16:00:55)

- Tried creating a "/etc/X11/xorg.conf.d/20-radeon.conf" file with contents:
Section "Device"
Identifier "ATI Mobility Radeon X1400"
Driver "radeon"
Option "SWcursor" "off" #software cursor might be necessary on some rare occasions, hence set off by default
Option "EnablePageFlip" "on" #supported on all R/RV/RS4xx and older hardware, and set on by default
Option "AccelMethod" "EXA" #valid options are XAA, EXA and Glamor. EXA is the default
Option "RenderAccel" "on" #enabled by default on all radeon hardware
Option "ColorTiling" "on" #enabled by default on RV300 and later radeon cards
Option "EXAVSync" "off" #default is off, otherwise on. Only works if EXA activated
Option "EXAPixmaps" "on" #when on icreases 2D performance, but may also cause artifacts on some old cards. Only works if EXA activated
Option "AccelDFS" "on" #default is off, read the radeon manpage for more information
EndSection
And the subsequent Xorg.0.log > http://pastie.org/private/goyhnu9bzxhzybl4sisaa
With this file and using "nomodeset", the boot would be stuck at :
[ OK ] Reached target Graphical Interface.
But without "nomodeset" parameter, it would successfully launch the graphical login but still freezes a few seconds after logging in.
xdpyinfo | grep -B2 resolution
screen #0:
dimensions: 1280x800 pixels (338x211 millimeters)
resolution: 96x96 dots per inch

T400 freezes some seconds after DVD-ROM is deactivated

Hi,
I have a T400 with "Deactivate DVD-Drive" activated.
5-10 seconds after the baloon-message saying that my drive has now been deactivated appeared, my system freezes for some seconds.
Is there anything I can do about this? Is it a known problem?
Thanks,
Patrick

- Tried creating a "/etc/X11/xorg.conf.d/20-radeon.conf" file with contents:
Section "Device"
Identifier "ATI Mobility Radeon X1400"
Driver "radeon"
Option "SWcursor" "off" #software cursor might be necessary on some rare occasions, hence set off by default
Option "EnablePageFlip" "on" #supported on all R/RV/RS4xx and older hardware, and set on by default
Option "AccelMethod" "EXA" #valid options are XAA, EXA and Glamor. EXA is the default
Option "RenderAccel" "on" #enabled by default on all radeon hardware
Option "ColorTiling" "on" #enabled by default on RV300 and later radeon cards
Option "EXAVSync" "off" #default is off, otherwise on. Only works if EXA activated
Option "EXAPixmaps" "on" #when on icreases 2D performance, but may also cause artifacts on some old cards. Only works if EXA activated
Option "AccelDFS" "on" #default is off, read the radeon manpage for more information
EndSection
And the subsequent Xorg.0.log > http://pastie.org/private/goyhnu9bzxhzybl4sisaa
With this file and using "nomodeset", the boot would be stuck at :
[ OK ] Reached target Graphical Interface.
But without "nomodeset" parameter, it would successfully launch the graphical login but still freezes a few seconds after logging in.
xdpyinfo | grep -B2 resolution
screen #0:
dimensions: 1280x800 pixels (338x211 millimeters)
resolution: 96x96 dots per inch

Windows Freezes 5 seconds after startup about 70% of the time

To start, I formatted my machine, installed Leopard, ran Boot Camp to set up a Windows partition, used a SP2 Windows XP CD, and started the Boot Camp process fine. Everything was good the first couple of days. Then however I very frequently found that when I start up windows, occassionally the mouse and keyboard would cease to be responsive and I'd be forced to hold the power button to reboot. I've noticed this happens at exactly the same time the brightness goes down 1 level so my best guess is whatever Boot Camp process is being started up is what's causing this.
Typically what happens is I'm in OSX, I click the Reboot option, hold down the Option key when I see the gray screen, then select Windows. Once I get a mouse cursor, I start moving it in circles and wait about 5 seconds after the desktop has loaded. If the mouse freezes, I reboot and try again. If it doesn't, I figure I'm good to go and continue using my machine.
Sometimes also around the same time instead of freezing it just immediately reboots the machine.
This problem is occuring way more than half of the time. Luckily it's only at startup and if I just keep trying until it works, then I can continue to use Windows without any problems.
I own a full version of Parallels and this problem has never occured when I start up my Boot Camp partition with that. I feel like that gives a reasonable amount of confidence to the difference in the Boot Camp service/drivers.
What can I do?

* Here is how I partially solve this annoying problem:
In activity monitor, one can clearly saw that Paralells 3 is jumping from one core to another (why is so, I do not know - perhaps they wanted to make similar thermal load on both cores).
Confirmation in syslog: an 19 07:06:29 aeroflot kernel[0]: [Parallels] IPI stat: rescheduled 1 cpus out of 2.
Removing vmmain.kext from kernel does not solving anything because Paralells requires this kext to be loaded in order to work!
1. Disable one core if you have dual CPU. This will resolve "core jumping" problem. The system will work with reduced performance, but since Paralells is still unable to use multiple cores, it might be less painful.
2. Try to avoid automatic loading of vmmain.kext during system startup when you boot both cores, or better, you can load vmmain manually when you want to work with Parallels 3.

Notebook freezes few seconds after start. Overheat? New video cable?

Hello and thanks for your attention.
HP Pavillion DV5-1235e
Windows Vista
4 years old.
I wanted to clean the fan on my laptop since it is 4 years old now. So I had to take apart everything and took it back together. I did remove the old thermal paste and putted some new. Except that I didn't change anything. And I also canged the video cable for a new one.
My first attepmt to start didn't end well. I pressed the power button my notebook started but the sreen didn't start and from there on he didn't even boot. (the HDD led didn't blink ) So i found a solution for that. pulled out the power suply, pressed the power button for 30-60 sec. Puted the power back and viola! It worked. But I didn't even open a web browser and the laptop freezed. So i pressed the power button for 3 sec and the laptop turned off. Turned it back on I had the same problem as in the first attemp. So had to pull out power suply, press power button , put power suply back on and it worked again but i didn't have time to open speedfan to see the temp so I don't know what happend actualy. The fan is rotating. the thermo paste is new. everything should work fine.
edit: I managed to start speedfan. The temperatures were low. The lowest I have ever seen them. But he still freezed
edit2: In safe mode. it works longer but freezes(does freeze and the monitor turns off)
Thank you who made it to this point.
Looking forward the anwsers.

Hello AmlnnN,
I understand have you finished doing a little maintenance   work on the computer it now freezes periodically is that correct? I will do all I can to help you resolve this issue.
First thing lets run a couple test on some of your hardware.
See steps below:
1.       I want you to boot into the bios menu this link will show you how.
2.       Once in bios go over to the diagnostic option at the top.(Note you will need to use the arrow keys to navigate)
3.       You may see 2 test there if that is the case run both test.
4.       It may take some time so please have the ac adapter plugged in.
5.       Once the test finished press F9 to setup defaults and then press F10 to save and exit.
Also find out while you’re in the bios if the computer ever freezes there.
Pleas respond back with your results at your earliest convenience.
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Why does it shut down a few seconds after turning on

I just did the most recent update for my Macbook Pro ( I am posting this message with my older macbook pro), and after the update finished, now when I turn on the unit, the pinwheel spins for about 20 seconds, then the unit shuts off. I am unable to interrrupt it and get it to open to any screens.

Try to start in Safe Mode: http://support.apple.com/kb/ht1455
See if you can get in that way.

Apple Mac book pro just turns off after few seconds after turning on

Hi Folks,
I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
Please help...
Regards,
Nadeem

Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result.

Computer won't run more than 3-4 seconds after turning on then shuts down. New CPU installed

I replaced a damaged AMD Phenom II 820 quad CPU with what HP said was a compatible AMD Phenom II 965 quad Black edition on my HP Pavilion p6320y. AMD recommended that I also replace the existing 300w PSU with a 500w PSU. That was done succesfully as well. When I turn the machine on, the cooling fans come on but run for no more than 3-4 seconds and the machine turns itself off. The CPU is brand new and has been determined to be fine, not to have been a DOA. Does anyone have suggestions?
This question was solved.
View Solution.

Hi,
I'd recommend checking with HP again as I don't believe the 'Black Edition' is supported on this machine.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My macbook pro 2011 model keeps freezing 30 seconds after start up

what happend is i tried to install Dreamweaver this installed succesfully and then when i started up the program it began to freeze so i force quit everthing and then it began to freeze so i hold the power button and it turn off and i restarted it then it said that "your computer turned of last time because of a problem do you want to open the programs that were open" click open. then i clicked cancel and it started i click google chrome and it froze completely i waited 2 hours and it was still frozen so i restarted and

Try booting into Safe mode (holding down the option key whilst booting). Your machine may run more slowly than usual, but at least it will let us know if you've a faulty kernel extension causing the problem.
Clinton
P.S. Which version of Dreamweaver? The CS6 or CC version?

I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!

I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!

See if you can boot into single user mode with Command S.

After turning my mac on the icons pop up at the bottom of the screen and than after 2-3 seconds the computer freezes and I can't open anything up. I did a hardware test and everything was fine. How do I get the computer to stop freezing

After turning my computer on the icons come up on the bottom and then the computer freezes. I have done a hardware test that shows no problems. I can move the arrow around the screen but everything freezes after the icons pop up on the bottom of the screen. Any suggestions?

After turning my computer on the icons come up on the bottom and then the computer freezes. I have done a hardware test that shows no problems. I can move the arrow around the screen but everything freezes after the icons pop up on the bottom of the screen. Any suggestions?

I got my iPhone stolen at a party, the next day my friend gave me back my iPhone 4s and he said that it was jailbroken. Now it will not turn on. When i plug it in to a charger, the apple logo appears for about ten second, then connect to iTunes stays on.

Hello, i have a question on my iphone 4s. I went to a party a few days ago and it had gotten stolen. The next day my friend said that he had found it and it was jaibroken? The phone was on 1 % when i had recieved it. It then died and i plugged it in to the charger. When i plugged it in the apple logo appeared as if it was starting but, it wasnt. The apple logo appeared for about ten seconds and then the screen went black. After that, the connect to itunes screen popped up and will not go away. So now when i take it off of the charger the screen just stays black and wont turn on? I tried connecting it to itunes and restoring it. But it wont even show my phone any more on the side of itunes. I tried restoring it and an error had occured (2001). I have looked up on youtube how to fix this problem and non of them have helped or worked. Its my only phone and i cant even text my girlfriend which bothers me terribly!! Please help me ASAP!!

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

Droid X - - - Freezes ten seconds after turning it on

Similar Messages

Maybe you are looking for