Droid X issues with merging touchdown calendar with master phone calendar

Hello,
I have the Motorola Droid X.
I access my work e-mail with touchdown exchange (purchased), which is working fine.
I'm trying to determine how to get my droid calendar to sync with my touchdown calendar.
I have tried to set this connection up manually to no avail.
Any help is greatly appreciated.
Thanks

roushc wrote:
Hello,
I have the Motorola Droid X.
I access my work e-mail with touchdown exchange (purchased), which is working fine.
I'm trying to determine how to get my droid calendar to sync with my touchdown calendar.
I have tried to set this connection up manually to no avail.
Any help is greatly appreciated.
Thanks
Your best bet is to contact the App author for support of their program.

Similar Messages

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

Hi clintfromid,
Thanks for using Apple Support Communities. I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands

Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands - as I have multiple numbers for people (ie: iPhone, Work, Home), is it the BlueAnt that is having the issues or the iPhone? Tried to eliminate info on my partner's contact in with only 2 contact numbers (iPhone, Home) and one or the other is totally screwing up. Seems, from BlueAnt website, that it would be the iPhone contacts...and the guessing begins?!! Anyone else have similar issues when BlueAnt S4 was paired and giving 'Phone Commands'?? Any suggestions would be beneficial as I've spent way too much time on the web looking for a good fix/answer. Thanks.

On your new phone: Settings>General>Reset>Erase All Content & Settings. Start over, this time using your new ID.

I m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help. i have told them nuumerous times that for better understanding i have made a video of it but no response.. really disspoint

i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
i have told them nuumerous times that for better understanding i have made a video of it but no response..
really disspointed with your customer support.
i have uploaded them in google docs..links below.. t
he first one happened on 30th of april 2014 https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
the second happened today. i called customer care but no satisfactory respose either. https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
its still under warrenty. please help.

Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
If you cannot take it person contact them to determine how to send them your phone.
You can't expect them to replace your iPhone without first examining it.

Hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

Hi vijayanandhtkp,
It sounds like you are getting the Connect to iTunes screen as discussed in this article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If so, please check out this article as linked from there.
Use iTunes to restore your iOS device to factory settings - Apple Support
Thank you for using Apple Support Communities.
Nubz

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

Am I having an issue with my phone or is it local service?

Last week my GS3 like for most people updated to KitKat from Jellybean. Since then I have had a problem with spotty data coverage. I live in the 18951 area code but as I have wifi I didn't notice and issue with the data coverage since I wasn't using it. I work in the 19132 zip code and was down in the area of 19147 over the weekend and was having a problem. I don't have wifi at work and I have very long days where it would be nice to be able to use the data I pay for. Is anybody else having an issue? If not I'll just decrease my data package since I can't use it anyway.

@footballchick66
Software updates are intended to provide you a better wireless experience, not worse. I would love to assist you with your device issues.
I checked coverage for the zip codes you provided and they appear to be great 4G coverage areas. Nothing has been reported in the areas as well.
Please share more details of what you're experiencing with your device data. Does your device display a 3G or 4G signal? If so, how many bars does it display when this is happening? And are you experiencing any problems with voice calls or texts as well? Please let me know so that I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

I absolutely hate the galaxy note 3!! I want to switch over back to iphone. There are so many issues with this phone!! There has got to be a way I can do this without spending crap ton of money. Its just ridiculous. I am livid

Overheating
Battery sucks
Apps suck
Phone freezes
Phone cuts off
Wall charger doesnt work
Not good signal
^^ These are all the issues that I deal with this phone!! I HAVE HAD FOUR OF THE SAME PHONES. RIDICULOUS. They all suck the same!! I want to go back to iphone ASAP. But between the early termination fee and full retail price it is NOT WORTH IT. I am about to just terminate my service altogether. I am sick of being stuck and stressed out over a mobile device!

Ambersikes17, we don't want you to cancel your service. Let's get your phone working properly. Are you using the original charger that came with the phone? If so, does it the phone respond to the charger if it is positioned in a different manner?
Have you noticed if the freezing occurs with certain actions like messaging or using an application? Are these issues that you have had with all of the devices or just your current phone? Have you tried using your phone in Safe Mode? http://vz.to/1d0SZSq
AndreaS_VZW
Follow us on Twitter @VZWSupport

Issue with Master Detail OAF Page

Hi Friends,
I have an issue with the Master-Detaiil Page.
I have developed a Master-detail form in OAF similar to the one in Oracle Forms. The master details are appearing fine. I have created a transient variable selectFlag that represents if the master record is selected. I am also able to see the detailed records after I have written the code in CO to populate the details table when a master is chosen.
But in the detail table I am seeing all the records. I should be able to see only the records that are children for the master record.
I have created the ViewLink as well. How can I pass the id of the master record to the detail table.
Any ideas. Kindly help.
Thanks

Hi,
Are u using partialAction on master form for this ?
You can add parameters from property inspector and put some unique attribute from VO and later filter the details record based on that.
--Sushant

Nokia is ignoring no.1 issue with Symbian phones !...

To all Nokia employees reading this :
Why is Nokia ignoring the biggest issue on ALL E- and N-series phones: the echo problem after a connection to non-Nokia bluetooth devices ??
This problem is ALL OVER THE INTERNET (including this forum)... I am reading about it (since i also have the problem myself) on every Nokia related forum out there .. and on every price-comparison website with user feedback.
This is really a bad situation. People at Nokia Care do not Care .. everytime I report the problem .. the response is : 'buy Nokia stuff' ... or 'this problem is new to us' (sure .. after a zillion calls .. still new).
Regards,
A very dissapointed customer.

17-Dec-2006
01:12 PM
daveyc1545 wrote:
me and my bf both got the nokia N70 cause it was able to run tom tom sat nav and road angel camera alerts
the problem we both hav is half way thru using sat nav to go some where it loses bluetooth connection to the GPS receevier
its really difficult if ur goin somewhere uve never been be4
i dont think we'll be gettin nokia's again was a big dissapointment!!!!
I recall reading that someone changed the GPS receiver to fix such an issue (apparently the problem wasn't with the phone, but the GPS receiver).

Compatbility issues with head phones

I'm not sure if it's a compatibility issue or not but here is what's happening.
I was using headphones other then the ones that came with my iPhone and it would pause automatically. I had to hit play again to get it to play again. It would work for a few minutes and happen again. I then used the headphones that came with my phone and it worked fine. The same thing happened in the car. I have to tape deck that goes into the tape player and connects to the phone and had the problem again. The car thing said it was not designed for the iPhone. The funny thing was that a few days before the headphone problem I used those same headphones with no problem.
Any ideas?
Lucia

Hi @locustacl ,
Welcome to the HP Forums! I see that you are having a problem with sound. I will be happy to help you with this. First try the built-in Windows Troubleshooter mentioned in this HP document No Sound from Speakers.
Also, look at setting your headphones as the default audio device. This third-party link will show you how to do that. It is for Windows 7 but if you search for Control Panel and then go to Sound it will be the same as the link.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Now I have a new issue with this phone...

I said in my last post that this is my first smartphone, and I'm having some issues with it.
I played one of the videos stored in my phone, now it won't let me play any videos, it prompts me that " Device Media Processor is Busy"...
Also I noticed tonight that I have no sounds for incoming calls, texts, etc...I went in to try and "change the ringtones and it keeps telling me "Invalid Ringtone Selected, Please make Another Selection". But the thing is, is that these are the ringtones the phone is equipped with?!?! Has anyone seen this before or have any solutions?
Solved!
Go to Solution.

Hi and welcome to the forums!
Try this link for Blackberry 101
It's an interactive demo for your 9670 it will give you the basics on how to setup features like ringtones, media features etc.
I have attached all the manuals for your device.
Thanks,
Bifocals
Start Here - BlackBerry Style 9670 Smartphone
6.0
PDF
User Guide - BlackBerry Style 9670 Smartphone
6.0
HTML
PDF
User Guide – Accessible Format - BlackBerry Style 9670 Smartphone
6.0
HTML
Safety and Product Information - BlackBerry Style 9670 Smartphone
PDF
Icon Guide - BlackBerry Smartphones
6.0
HTML
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Is anyone having issues with bluetooth phone connectivity with iOS6 upgrade in a VW?

Any voice commands made through the car end up in "call history"

The problem is that you're using an uncertified lightning to 30-pin connector (the blue cable). If you purchase the 30-pin to lightning cable (either online, at an Apple store or an authorized dealer) it should work fine.
I have a 2011 Tuscon and tried the lightning to USB cable that came with the phone - no dice. Talked to my local Hyundai dealer and they don't have an eta on the Hyundai lightning cables (I'm sure it's in the works).
Lightning to 30-Pin Adapter (0.2M)
Part Number: MD824ZM/A
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=48
$29 in the US store, $45 in Canada (yes, even though our dollar has been par for years)

DROID RAZR issues with status bar - Winamp

When i pull the status bar all the way down it is really hard to get it to stay locked. It just keeps flying back up to its normal position. Winamp is also borked

If your Having Issue Linking too Winamp an other Stuff with it you might Give this A Look an see if can Help Ya:
You need to install both the Winamp for Android and the latest Winamp Media Player for your PC.
Step 1::
On your Android device, download Winamp for Android.
Step 2:
When you initially launch the application you'll see a "Winamp Help" screen. Click on the "Wi-Fi Sync" button and following the onscreen instructions. If you don't see the Winamp Help screen, simply launch Winamp and from the Home screen press the Menu button (hard button), go to "Settings" and "Enable wireless sync".
Step 3:
Make sure your PC and Android phone are on the same Wi-Fi network.
Step 4:
From your PC, download & install Winamp Standard (free) or Winamp Pro (premium). Version 5.6 or later is required. Please note that Wi-Fi sync with Winamp for Android will not work with "Winamp Lite". After launching Winamp you will be prompted to "Add Media to Library" or "Import from iTunes".
Step 5:
From the Media Library tab, select "Devices" in the navigation panel (left-hand side of screen).
Step 6:
Your Android device should now be visible in the "Discovered" area of the "Devices" view. If not, click the "Discover" button. You'll also want to be sure that your device is not in sleep mode.
The "Discovered" view only indicates available devices. To sync with your device, you will first have to attach it.
Step 7:
To attach a device, double click on your device icon (or single click on the attach overlay button). This will send a pairing notification to your device.
Step 8:
After clicking "Attach", a notification will be sent from the Winamp Media Player to your Android device asking you if you would like to allow Wi-Fi pairing. Click allow.
Step 9:
Once you have selected "Allow", you should now see your device in the "Attached" area of the "Devices" view. Additionally, you will see your device name appear under the "Devices" node in navigation panel.
(Note: You only have to pair your phone once. After initial pairing, your device should automatically appear in the attached state. You may be prompted to pair again after upgrading to a newer version of Winamp for Android).
At this point your Wi-Fi set-up is complete and you are ready for wireless syncing.
Step 10:
Once your device is "Attached", mouse over the device icon and click on the "Sync" overlay button. Alternatively, you can manually drag and drop files in your "Audio" library to your device (pictured below).
You also have the option of setting up your Preferences by right-clicking on your device or by going to Options >> Preferences >> Portables >> [Device Name]. Learn more about sync preferences and settings.

Issue with Master and child relationship,viewlink

Hi Frnds,
In one of our custom pages we have Master child relationship between Invoice lines and their distributions.
Things work absolutely fine when total no of distributions(say 10) are equal to max no of distributions that can be shown on 1st page(i.e equal to advancetable property value 'Records displayed'..say set as 10)
What happens is when in advance table I click on next button to navigate to next set of records and then edit some field that have any event..ppr or lov my control by default gets transferred to very first set of records.
!!!!!!!!!!!!!! Also this happens only when no of invoice lines are more than 1.
I not sure whether the issue is with VL,VO,AO or the advance table property.
One simple solution that I have tried is...getting back the focus to the row that is updated but it causes some other problem.
Any pointers will be very helpful
Thanks in advance.

Hi any help???

Droid X issues with merging touchdown calendar with master phone calendar

Similar Messages

Maybe you are looking for