Droid X won't charge, has green light staying on.

My Droid X just started today not charging and the green light stays on when it is plugged into the wall, PS3 or laptop.  How can I get it to charge and stay on?

    Hi Photogrrlz! Charging is crucial to the operation of any wireless device so it's pretty clear that we need to get this matter resolved. If you're still experiencing this, please follow DionM_VZW so that we can discuss your options. Thanks!
Dion M.
VZW Support
Follow us on Twitter www.twitter.com/vzwsupport

Similar Messages

  • Macbook air 11" late 2010 won't charge battery, green light on

    Had charging issues so bought correct wattage apple magsafe adapter. With new magsafe, laptop works fine, green light on, but not charging battery. It has 335 cycles and shows 5.944 volts. So, I bought a new battery off ebay (A1375). Installed new battery, and now it will only work on battery power and magsafe shows not connected, no green light as if its fried. I have 3 magsafes so its not this.
    I did all the nvram, SMC, and battery out/power button SMC bypass resets to no avail. After a time, the battery died to 0%, and now the magsafe turned green again and works fine on AC power again! This is really strange. It acts as tho it can only run on DC or AC power but not both and never charges. I even put in the old battery, updated to the ~31 Jan 13 firmware and tried all the resets again. Nothing. So now it works just fine on AC power, green light on, 0% on the new battery not charging.
    Lastly, I took it into apple and they wouldn't fix it for cheaper than 700 which more than totals the value of the laptop.
    Any pro's out there have an idea? I don't want to toss a perfectly good laptop that has 100% pixels and runs perfectly in every other way.

    RRFS thank you for the reply. Am I throwing good money at bad by trying to fix it? I have found some logic boards on ebay for mid 200's i'm considering. Or should I cut my losses and part it out? I fortunately got my data off it on one of the last successful startups.

  • MacBook Pro won't charge no green light

    Hi, my MacBook Pro suddenly just stopped charging. A few hours ago it was working fine. I leave it plugged in while I play games because it drains my battery so quick and then I noticed it wasn't charging. The green light is not on and I've tried switching outlets and still nothing. Does anyone have any suggestions? Should I bring it to the apple store? The laptop is about 1.5 years old.

    Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you are running 10.7 Lion or 10.8 Mountain Lion), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information from the top of the page back here.

  • My macbook wont turn on. its a total black out even the led light on the charger has no light. its a total blackout.

    my macbook wont turn on. its a total black out even the led light on the charger has no light. the battery indicator has no light its a total blackout. if you pressed the power button theres no light at the bottom. nothing at all even the spin you cant hear anything. blackout as in

    Try resetting the System Mangement Controller -> http://support.apple.com/kb/HT3964.
    If that has no effect, then your only recourse is to take your machine to your local Apple Store/AASP and have them run diagnostics on the machine.
    Good luck,
    Clinton

  • HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

    I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Why does the green light stay on at the top of my screen where pictures are taken?

    MacBook Pro, OSX 10.9.2  - at the top of the frame of the screen a green light stays on - I think this is the camera.  Is there a way to shut if off?

    This procedure may show which program is using the camera. It makes no changes, and therefore will not, in itself, solve your problem. It will only work while the green LED is on. The instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Please triple-click anywhere in the line below on this page to select it:
    sudo lsof -Fc +D /L*/Cor*/*/*/AppleCamera.plugin | sed '2!d;s/^.//' | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Green light stays on

    I bought an ipod shuffle for my wife and it was working just fine at first. But now the green light stays on and nothing happens. Help!!

    I'm in the same boat, I think the ipod is the best thing since sliced bread. I don't want to go back to carrying around a cd player, and CD's. Where are the BIG wigs while were having these problems. Since this Discussion is on the Apple Web page I would think, someone from the apple camp would be reading their consumer reports. I'm really unhappy, I'm not trying to pay for tech support, and I can't figure out what the problem is on my own. I'm actually e-mailing a guy back and forth, he's giving suggestions on what I can do. It seems as if every problem stems from apple downloads. Apple should send me another ipod. I have a mind to contact my local newspaper, just to see if they can get some answers.

  • Shuffle 2nd generation green light stays on

    My ipod shuffle was kinda working (songs would skip along as they played). Now, when turning it on, the green light stays on. I can sync it with itunes and transfer songs like normal, but I cannot play them.

    "Hi,
    I like you had many problems getting my ipod shuffle to work properly. I finally got a very helpful apple tech guy to help me, and now it works. Here's what we did (these are instructions for windows xp machines):
    1. Go to apple.com/ipod/download, and download the latest software updater 2005 - 11 - 25.
    2. Once downloaded, install the software updater.
    3. Restart machine, with the ipod inserted in the USB port, power setting to OFF position.
    4. Once cpu is restarted, go to Start -->ipod-->ipod software updater.
    5. Click on "Restore" when the ipod updater window invites you to.
    6. Once finished, disconnect Ipod, and turn the power switch to one of the "on" positions (it doesn't matter which).
    7. Green light should come on and turn off. Turn off power switch a second time and wait 10 seconds.
    8. Insert ipod back into USB port; it should automatically start itunes, which should then offer to setup your ipod.
    9. It will automatically begin downloading all songs from your itunes library onto the ipod. WHen complete, you can disconnect ipod, and hopefully the thing will work.
    NB: unlike other mp3 players, you MUST use itunes to download your music onto the ipod. you cannot click and drag music using windows.
    Hope this helps, and shame on apple for making it so complicated." Try it, worked for me just a few minutes ago, and I had the SAME EXACT problem, seriously.

  • HT201260 Plz help my macbook run with only charger, Battery is not working , and showing not charging , while i am charging with electricity plug has green light ..

    Plz help my macbook I am using now like a desk top , battery is not charging showing not charging,,all the time I am using with electricity and connecting plug showing green light. even i have to start computer with electric connectivity ,,
    Mr. Steve job your soul is made for apple plz help me .. I need help ..

    Click on the Apple logo on the taskbar.click about this Mac>more info. In the left column click on power, under battery check if is charging, health, cycles Apple claims 1000 cycles, but maybe your's is not happy and might need to replaced.Look at the numbers and see if anything looks way off. My battery is chargered, so the power supply says no for charging.
    All the best, hope this helps.
    You can also try a smc reset: http://support.apple.com/kb/HT3964

  • Airport Express has green light but won't connect to remote speakers from Macbook or iPhone

    Hi,
    I have a 6-7 year old airport express that I have used frequently as remote speakers for my macbook and 2 iphones. I am currently having problems with getting this to work in my new flat. It worked for a few weeks and now he green light is on but the remote speakers time out when i try to connect to it.
    Sometimes the airport is visible in itunes/iphone and sometimes it isn't. when it isn't if i unplug it and leave it a while it appears again but i cant connect but the green light is always on.
    It's all set up properly so I don't know if it is just getting old and I need a new one or whether this can be solved.
    I have reset this numerous times
    Thanks in advance!

    I've solved this by resetting my wireless internet connection at the box and then setting up airport express again.
    I don't know whether that will help you.....

  • Battery not charging, dim green light on Magsafe. Stuck at 37% battery life. Not sure the issue, so I need some help.

    Yesterday, my Magsafe power adapter/battery was working fine. I had  unplugged the machine last night to do some work, and I left it  unplugged all night. It held a good 90% charge over the night, and after  using it for a few hours I wanted to plug it back in. I noticed the  normally bright amber light on the Magsafe did not come on, but a faint  green light.
    The machine says "Battery is not charging", but no "Service Battery  Warning has shown up. I also attached an image of my results from  Coconut Battery, just not sure what the numbers mean.
    Any ideas?

    I reset the SMC, nothing changed, I took out the charger to clean, but there wasn't anything dirty.
    BUT as soon as I plugged the MagSafe out, the power percent jumped from 37% to 47%. Still not charging, I am very confused on how it charged??

  • Macbook pro will not charge, green light stay on.

    today it ran out of charge and ive plugged the charger in, but it doesnt seem to charge. The light on the charger did not turn from green to orange, it stayed green. It has been like that for about 30 minutes now. The computer will not turn on when I press the power button.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • AEBS has green light but email and internet not working

    I have an AEBS (second hand) connected to my cable modem. I used an ethernet cable and manual settings to set up as Utility wouldn't detect the AEBS wirelessly to start off with. Under internet settings in Utility I have selected Connect Using Ethernet and Configure IPv4 Manually and entered all the same settings I have in the MacBook for my modem. The AEBS light went green, Utility says setup was successful and the MacBook recognised the new network and connected to it, so I have all the bars black on the Airport icon on my top menu bar, and also the network showing with a green light in system preferences. But email and internet still won't go - just spinning wheels and exclamation marks! They're fine when I connect the modem direct to the MacBook so it's not a modem fault. I have tried restarting modem, MacBook and AEBS to no avail. Any advice most gratefully received, I'm very much a novice a this!

    I know that you have already attempted to restart the various pieces of networking equipment, but please try the following complete power recycle steps to see if this gets the AEBS to be able to communicate properly with the modem.
    When changing ISPs (or networking equipment) it's always a good idea to start from "scratch" in configuring your equipment.
    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Power-up the modem; wait at least 10-15 minutes.
    Power-up the base station; wait at least 5-10 minutes.
    Power-up your computer(s).
    In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

  • Time Capsule has green light, connects with wifi, but no internet

    After a recent cable outage in my area, I no longer have internet through Time Capsule.
    The cable company's "maintenance" has been corrected/restored.
    My cable modem works fine and connects directly to my MacBook via ethernet just fine, as well.
    When I connect the cable modem to the TC (via ethernet), the green light eventually comes on and my MacBook can access the TC via wifi just fine, but I cannot access the internet.
    Thanks, in advance!

    Please try the following to get the TC and modem communicating again:
    o Power-down the modem, TC, and computer(s); wait at least 10-15 minutes.
    o Power-up the modem; wait at least 10-15 minutes.
    o Power-up the TC; wait at least 5-10 minutes.
    o Power-up the computer(s).
    Computers connected to the TC, either by wire or wireless, should now have Internet access. Please post back your results.

  • Desktop won't start; blinking green light

    I have a Compaq Presario SR 1318NX which will not start!?  There is a blinking green light on the back of the power supply; which is normally solid green when 110V AC is plugged into it.  I have tried the trick of holding the start button while plugging in the power cord ..... no help.  I have also opened the case and carefully removed every power cord to all the internal devices ................ the light turns solid green only when I pull the main power from the motherboard!
     Do I need to replace the motherboard?  The troubleshooting site on hp.com would indicate the power supply is OK if the light is solid green.
    Thanks for any suggestions,
    Lou
    This question was solved.
    View Solution.

    My wife's computer has been having the same problem several times. One solution I found that worked before was to unplug the motherboard power cable and the PSU power cable from the back of the PC and then connect the power cable and connect the motherboard power cable while holding down the power button. Scary, to say the least, but it worked, until one day I accidentally flipped the wrong breaker and then spend two hours trying the same solution with no luck and Googling again. And here is what I found. This is the simplest yet crudest solution. It’s easy and non invasive and it doesn’t matter how tech savvy you are. Take a blow dryer and turn it on to blow air at the back of the power supply for a couple minutes. When you see the light turn green you’re all set. It's worked for me after it worked for a hundred others, maybe more. See the testimonials on this site: http://talk19.wordpress.com/2008/01/13/hp-m7088d-power-supply-led-blinks-green/. It’s a shame that nothing like this appears on any HP site. So don’t waste your money on a new MoBo or PSU. All you need is your wife’s hair drier.

Maybe you are looking for

  • Blue tinted screen, menory problems, underperforming battery - 5 day old HP pavilion dv6-6005sa

    I bought a new HP Pavilion dv6-6005sa 15.6" Laptop - Linen White on 14/06/11 from Currys digital, Arndale Centre, Manchester. The laptop is less than 1 week old. The screen is a frost blue colour from the second I turn it on to the second it is turne

  • Color Management Problem

    I just installed Photoshop CS3 on my home PC, and seem to be having a problem with color management. When opening photos taken with my Canon G9, or even pictures downloaded off the web, in Photoshop they appear badly posterized. Viewing the same phot

  • Administration port - network channel for admin traffic

    I am trying to configure a separate channel for Administration traffic on weblogic. I followed the oracle docos and configured the SSL, domain wide admin port, server listen address, ‘admin’ channel. The issue is admin traffic in not happening throug

  • Do we need to create individual shipment document for Transportation Chain

    Do we need to create individual shipment document in Transportation Chain if the forwarding agent is same for all shipment? For Example : first it takes truck,          then ship,          then again truck to reach Customer. in all above case forwadi

  • SAPbouicom value change

    Hi Experts, I would like to know how to find out the sapbouicom (GUI) value changes for a field in SAP B1. E.g. project field in the doc header --> tab accounting and order number in the document header --> tab accounting. - in old version (2007 belo