Droidx vibrate mode no longer works

Vibrate mode was working fine then a couple weeks ago it just stopped working, i.e.. incoming calls will not vibrate the phone.  The "phone vibrate" mode is checked in the "Settings -> Sounds & Display settings".  I've power cycled the phone but no luck.  Is there another option perhaps that needs to be turned on/off?  Even when I turn the volume off with just the vibrate mode initiated the phone will not vibrate.  I thought about a "Hard Reset" but maybe someone here has a better solution?
thx

Never mind.  Atfer talking to Verizon Support and hard reseting the phone several times, it turns out that the phone needs to be replaced.  New phone will arrive on Thursday.

Similar Messages

  • ABAP Web Dynpro Application changes in Administation Mode no longer working

    Hi Gurus,
    To apply customizing to a standard SAP Web Dynpro application we used to simply run the application in administration mode. After we changed a parameter to allow for theme application this adminstration mode no longer works. Right-Click simply acts as if you are running the application normally. We have tried to remove our parameter but this had no effect.
    How can we "fix" this error without creating a new custom configuration which will cause the URL to change?
    Thanks,
    Garth

    Hi,
    how did  you  open in administrative mode?
    to open in adminstrative mode do as follows:
    In se80 ,i.e in the menu bar:
    Web Dynpro Application->Test->Test in Administation mode.
    i hope u can see the option "Settings for surrent config" .
    you can refer the thread.
    [Re: ABAP Web Dynpro Application changes in Administation mode]
    Priya.

  • My iphone4 vibrate function no longer works

    Can someone tell me how to troubleshoot why my vibrate function no longer works. It just stopped working a few days ago. I've not changed any settings. I've tried turnin it off then back on (both the phone and the settings) and nothing seems to work.

    sounds like a malfunction of the vibrator motor.  Bring your phone into Apple for evaluation and possible exchange.

  • The "Pin as app tab" produces tabs that do not persist across sessions. I have this problem on two installations, and it's really annoying (since the Permatab Mod no longer works in Ff4). Can you offer any assistance?

    The "Pin as app tab" produces tabs that do not persist across sessions. I have this problem on two installations (PC and laptop, both running Win7), and it's really annoying (since the Permatab Mod no longer works in Ff4). Can you offer any assistance?

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"

  • Drive Mode no longer works on my LifeDrive

    Ever since upgrading to 10.4.9, Drive Mode no longer works on my iMac. Syncing continues to work fine. Lots of other people on the Palm forums are having the same problem since upgrading to 10.4.9. Did something change in the way the OS handles mountable drives that could be causing this problem?

    I have same problem with Palm T5 and MacBook since 10.4.9
    When I turn Drive Mode On, the Palm hangs after 5 seconds.
    On the /var/log/system.log on mac :
    kernel[0]: USBF: 1567.341 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1573.342 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1579.342 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1585.342 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1591.342 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1597.343 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1603.343 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1607.234 ControlTransaction: control packet 1 error 0xe0004057
    kernel[0]: USBF: 1607.234 [0x339f300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of hub @ location: 0x1d000000)
    kernel[0]: USBF: 1608. 6 AppleUSBUHCI[0x309d000]::DeviceRequest - dmaCommand (0x3395780) already had memory descriptor (0x3233a80) - clearing
    kernel[0]: USBF: 1613.343 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1619.344 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    kernel[0]: USBF: 1625.344 AppleUSBUHCI[0x309d000]::Found a transaction which hasn't moved in 5 seconds on bus 29, timing out!
    MacBook Black 2Ghz 1Go RAM   Mac OS X (10.4.9)  

  • Quick mask mode no longer works for Photoshop CC

    I have the latest version of Photoshop CC,  and  the  quick-mask-mode no longer functions as it should. When I try to modify an existing mask with the quick-mask-mode the highlighted read only appears on some of the photo being edited. In additions, those highlighted that do appear red only do so very slowly. This problem appeared after a recent update to Photoshop CC.
    I have been using this quick-mask-mode for the last 10 years and have never seen this bug before.
    I know how to check the options and my opacity is at 50%.
    I use quick-mask-mode frequently and I need it to work.
    Is there a setting I need to change?
    It is hard to believe that I am the only one with this problem.

    I'm having the same problem and I just downloaded the latest updates, which didn't seem to fix it. Here's a screen shot:
    And the red just along his tricep I had to draw "blind" because it wouldn't populate the brush stroke to cover his arm until after I moved my mouse to the side of the screen. Any changes or movement on the screen is slower than molasses.

  • Undo close tab in Private Browser mode no longer works!?

    I'm using the Aurora build. The restore closed tab shortcut Ctrl-Shift-T no longer works in private browsing mode! This is very annoying since I cannot reopen accidentally closed tabs.

    I believe this problem started after they implemented private browsing in a new window instead of closing the existing window.

  • Landscape mode no longer working in Mail app.

    When I'm using the mail app, and turn the Iphone on it's side, it no longer goes into landscape mode. Other than that, the mail app is still working as it should, and landscape mode is still functional in other apps such as messaging.
    I'm at a loss. I really want to use the larger keyboard when emailing. Anyone have any suggestions?

    Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • High Resolution Mode no longer works with new vers...

    For years I used Skype in high res mode (1280X720) with auto answer to look at the veiw from may vacation house window. This worked great. The picture quality was terrific and the connection was always stable. However, after I upgraded the Skype version on my home windows 8 PC in May, I could only connect at 640X480. I thought the issue was that the mac mini in my vacation house ran a very old version of Skype (on the tiger OS), so I put in a new 2.5GHz core duo processor and upgraded to snow leopard and the latest version of Skype. But this did not help. The only way I could get Hi-Res back was to install old versions of Skype on all my computers. It seems dumb that I have to run old versions of the software, I would really like to run current the versions. Couldn't you add a feature that allows users to overide the system choices and pick the resolution?

    Hold Menu + Play/Pause to reboot the box from the main menu.

  • Continuous mode no longer works in recent update

    I'd like to tell you the version but there is no About in the newest Reader. When reading in continuous mode the first or second page is ok but then the pages get unreadable. It looks like a posting capture picture.  Unreadable. Please fix as Reader is nearly unusable now.

    Would you provide more information about the problem?
    To check the version number of Adobe Reader
    Go to the Reader home screen.
    Tap Help.
    Tap the Overflow menu button in the upper right corner.
    Select "About Adobe Reader" from the menu.
    (Click the image above to enlarge)
    What is the version of Adobe Reader?  (See above.)
    What is the model number of your Android device?
    What is the Android OS version?
    Do you see the same problem in the Single Page mode?
    Does the same problem occur with all of the PDF documents that you have or just particular ones?
    How long does it usually take for pages to become unreadable?  As soon as you open it?  When you start scrolling? Or does it take a couple of minutes?
    When you wait for a couple of seconds, will the unreadable pages become readable again?
    Would you send your PDF document (that exhibits the problem) to [email protected] as an email attachment?  Please add the link to this forum page to your email for reference.
    Thank you for your help.

  • Target Disk Mode no longer working

    I've never had any problems connecting my PB G4 to my desktop G4 in target disk mode until today. The PB simply starts up in the Mac OS and doesn't appear on the host computer.
    I haven't changed anything. I checked the firewire cable on another device and it's fine. Only thing that's happened since I last connected was I travelled with the PB and played lots of DVDs on my trip. Can't imagine that would have done anything...but even after repairing permissions on both PB and host computer--it's still not working!
    Any ideas? Can the firewire port on the PB be damaged somehow? Many thanks for any suggestions.

    Resetting the PMU might light the firewire port back up.
    http://docs.info.apple.com/article.html?artnum=14449
    Joe

  • Silent mode no longer works after 2.2 update

    When the Ring/Silent control is switched to the OFF position, the iPhone fails to go into silent mode. Rings, SMS notifications, music etc. are still loud and clear.
    The only way to quiet the iPhone is to turn it off.
    I have shut down (turned off) the iPhone and turned it on again.
    I have backed up and restored the device.
    I restored the device again and set up the iPhone as a new user. Still no love.
    This was not an issue with the iPhone before before running the 2.2 update. Is there a known fix?

    If the standard troubleshooting steps do not resolve this which are power your iPhone off and on, Reset, Restore with iTunes from your iPhone's backup, Restore your iPhone as a new iPhone or not from your iPhone's backup, time to give AppleCare a call at (800) 694-7466, or make an appointment at an Apple store if there is one nearby.

  • Skip to next album in shuffle by album mode no longer works!

    Shortcut is listed in help, but is not working!
    Option-Right arrow is shortcut. Or alternatively you could option-click on >> button.
    Neither is working in new itunes.
    The only way to get to next album I've found is to click thru whole current album till the end.
    Which is irritating.
    I havn't found a way to report this as a bug.
    Probably there is easier workaround solution?
    I have relatively big music collection and I like to listen to random albums, but if I'm not in a mood to listen to what is playing, I'm skipping to next random album...

    Vitrine,
    Skip takes you to the next track.  That is the behavior, no matter what you are shuffling by.

  • When phone is on silent mode, my vibrate feature is not working....any suggestions?

    When I put my phone on silent mode, the vibrate feature is not longer working....any suggestions?

    If it's a software issue and your settings are correct then the next step would be to restore your phone to new. Use iTunes to restore your iOS device to factory settings If it's the switch itself then try moving it back and forth several times. Perhaps there's a bit of pocket lint or dirt preventing a good contact. If that doesn't work then you'll have to take the phone into an authorized Apple repair centre or Apple store and have it checked out.

  • My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

Maybe you are looking for

  • How can I debug a web application running on Weblogic 10.3

    Hello, I have inherited a NetUI Web Application developed using Weblogic Workshop and I can't manage to debug it. I have configure my server in Workshop and to debug it I right-click the project in Project Exporer and select Debug As -> Debug On Serv

  • I915 and linux-3.16.0-2 : gdm crashing ?

    Hello. My laptop is using archlinux testing and gnome. Since I upgraded to linux-3.16.0-2, every single time I try to launch gdm, I got "Something got wrong" and I cannot launch gnome. I found a bug report looking like the problem I'm facing : https:

  • Install document capture

    Hi. I install oracle document capture with a setup and restart the machine correctly, but when i run the application document captures, it show a error Login failed: Error numbre 20046, Error Description [The User name and PAssword entered could not

  • Grant access to my documents

    How do I grant access to my documents (under my user name) to another user name on the same iMac?

  • How to make track lists appear as they do on alb

    I've been having trouble with this lately. I have some albums saved on my computer and I would like them to appear in the same order as the actual album. Now, when I goto import the tracks into the mp3 player everything looks good and seems like it's