Drop down list in sourcing missing

Hi
When looking at work list in sourcing there is a drop down list where you can choose a certain product category. I have a user where this list is empty. If I move him to a different purchasing group the list is populated. The only difference between the two purchasing groups is which users groups they are responsible for. What could be wrong?
Sincerely
Anders

Hi Jock.
They are responsible for the same products.
Sincerely

Similar Messages

Missing Export and Use Drop Down Lists

I cannot export my .mov files to any format other than .mov as the Export and Use drop down lists are missing. When I go to File > Export the text for Export and Use are there followed by blank gray space as if the drop down lists never existed.
I just upgraded to Pro today and had infrequently used QuickTime Player previously. I have the most current version 7.6.5. The other functions appear to be working normally, but I am not a "familiar user" so I can't say for sure.
Any ideas?

Well I could not copy & paste the text from the Movie Inspector, so I have typed it below (except for the complete source info).
Source: C:\....Filename.MOV
Format: 16-bit Integer (Little Endian), Mono, 44.100 KHz
MPEG-4 Video, 1280 x 720, Millions
Movie FPS: 30.01
Playing FPS: 30.01
Data Size: 8.16 MB
Data Rate: 6.99 mbits/sec
Current Time: 00:00:00.00
Duration: 00:00:09.80
Normal Size: 1280 x 720 pixels
Current Size: 1280 x 720 pixels
I have also downloaded a couple of iPod hip-hop ad movies (.mov) and they have the same problem (no export drop-down lists), so I don't believe it is the movie format.
I have not tried to uninstall/reinstall QuickTime Pro yet, but wonder if I should....

DSN's Missing in the ODBC drop down list box

Being new to JDeveloper, I have been running through the
tutorials. I have installed Oracle lite on NT4 SP3 and have
tested out the sample data base 'Polite' using the installed
odbc driver through MS query ...all works fine, however in
tutorial 3 while trying to add the Data Form using Oracle Lite
driver, no dsn's appear on the next screen of the wizard when I
click on the 'ODBC drop down list box'. How do I get Jdeveloper
to bring up the DSN's. I have also tried the 'Sun JDBC-ODBC
driver' route, yet still there is not a single DSN in the drop
down list box.
Thanks
null

Mohamed Nosseir (guest) wrote:
: Gavin Higgo (guest) wrote:
: : Mohamed Nosseir (guest) wrote:
: : : Gavin Higgo (guest) wrote:
: : : : Being new to JDeveloper, I have been running through the
: : : : tutorials. I have installed Oracle lite on NT4 SP3 and
have
: : : : tested out the sample data base 'Polite' using the
: installed
: : : : odbc driver through MS query ...all works fine, however
in
: : : : tutorial 3 while trying to add the Data Form using
Oracle
: : Lite
: : : : driver, no dsn's appear on the next screen of the wizard
: : when I
: : : : click on the 'ODBC drop down list box'. How do I get
: : Jdeveloper
: : : : to bring up the DSN's. I have also tried the 'Sun JDBC-
ODBC
: : : : driver' route, yet still there is not a single DSN in
the
: : drop
: : : : down list box.
: : : : Thanks
: : : Would you please give us more information about your
: : : configuration? JDeveloper version, Oracle Lite version,
: : Windows
: : : NT locale setting? Is it US version of Windows NT or local
: : : version?
: : : Thanks.
: : I am using Jdeveloper beta 2 (downloaded from the Oracle web
: : site) against Oracle lite 3.0.6.2.4 on Windows NT 4 sp 3.
: : Is this all the info you require?
: I also want to know if your Windows NT is a US English version
or
: a localized version?
: Thanks,
It is a Windows NT US English version
Thanks
null

Drop down list of email addresses missing from "Im...

Hi folks,
BT Yahoo's log in screen had the option of a drop down list of email addresses allowing you to select the one you wanted - this was very handy if you used several email addresses or there was only one PC in the house and various members used it.
In the new improved email, there doesn't appear to have this option - you go into the main account (when you discover how) and the option is still ticked, but has no effect.
I wish BT would remember that "if it ain't broke don't fix it!"
I would be grateful to know if it is possible to still select from a list.
Michael.

Hi ypt,
Yes, BT are moving their email and associated services away from Yahoo! For more information on this please go to www.bt.com/newemail
The new BTemail service and platform will be provided by CP (Critical Path) and existing BT broadband customers will hopefully be migrated to the new email system and platform sometime in the near future once the field trials have been completed.
The BTYahoo login portal has been closed and you can now only login to your emails by the new BT email login portal on the http://www.bt.com website.
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Lotus Notes Missing in Drop Down List for Calendar Synch

Hello there,
   A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2. I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes.
B) When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes. I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work. I have checked and all the connectors are there, but for some reason, they are not being recognized. Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward. Any ideas on how I can get this software to recognize Lotus Notes? I appreciate any help you can give.
Thanks,
Rick

While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
CALL METHOD grid1->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                is_variant       = gs_layout
                i_save           = 'A'
                i_default        = p_def
      CHANGING it_outtab        = gt_sflight.

Acrobat Color Management - Color Profiles Missing from Drop down list

I have created a custom .icc profile for my large format plotter. The .icc file is located in C:\WINDOWS\system32\spool\drivers\color, but it is not visible in my Color Profile drop down list, in the Color Management section of the Advanced Print Setup box, which is available via the Advanced option in the print dialog box. I have set up 10 users, some have Acrobat 8, some have acrobat 9. Of those 10 the profile is not showing up on one of the Acrobat 8's and one of the Acrobat 9's. To complicate matters, last night I sucessfully created a preset for an Acrobat 9 user and linked the profile, but after he logged off and back on today he can no longer see the profile either. Have you ever seen this activity? -Thanks

Here's the link:
http://forums.adobe.com/community/acrobat/acrobat_windows

Populating drop down list in a table cell-urgent

Hi all
I have a problem. I want to populate a dropdown list in a table cell. can anybody tell me the step by step procedure for that.
I am doing it generally. not using R/3
I am creating sub node like u have mentioned. I haven't done it using wizard.
Is there any difference in the way we populate this list?
My root node is expense. Inside that some value attributes are there. For the drop down list i've created a sub node 'extype'.
I am getting error.
it is:
com.sap.tc.webdynpro.progmodel.context.ContextException: Node(EREmpHomeView.expense.extype): cannot bind or add elements because the node has no valid parent
Following is the code i've written.
IPrivateEREmpHomeView.IExtypeElement el;
          IPrivateEREmpHomeView.IExtypeNode nd=wdContext.nodeExpense().nodeExtype();
          el=wdContext.nodeExpense().nodeExtype().createExtypeElement();
          el.setEtype("Travel");
          nd.addElement(el);
Sill i'm getting the same error
Hi Nidhideep
Error has gone with the code that Mr Anil has given. But there is no value in the List. Dropdown list is coming as a blank list.
Thanks and Regards
Aparnna
Message was edited by:
        aparnna prasad

hi
Aparna try this code:
1. Context description at design time:
Value-Node "myNode", collection type=list, cardinality=0..n, selection=0..n
and the attribute:
Value attributes myValue, type="String".
2. The corresponding Java source code example that you create in the wdDoInit method of the controller implementation:
// The ISimpleTypeModifiable interface enables access to
//a data type instance that can be modified at runtime:
ISimpleTypeModifiable myType =
   wdThis.wdGetAPI().getContext.getModifiableTypeOf(.myNode.myValue);
//Sets the label text for this data type.
myType.setFieldLabel(New label)
//Sets the valid values of this data type. The individual elements are inserted
//when the put method is called and
//and the value set is filled with the appropriate
//key value pair.
IModifiableSimpleValueSet values =
   getSVService().myType.getModifiableValueSet();
values.put(key_1,Mister);
values.put(key_2,Mistress);
values.put(key_3,Miss);
Regards
Nidhideep

Populating fields, drop down lists, etc... from external data

Hi,
I am trying to evolve my forms, and am interested in learning how to connect my forms to external data sources. I assume using server solutions would work, but are complex and costly. They are also likely beyond my scope of understanding. What are the best practices for doing this? Can it be done with a text file or spreadsheet? I am really looking for a better way to create custom data in forms than to go into the script and change them manually. Price is a good example. I have some forms that generate a very basic quote for services. When the price of part x changes I need to going into the from chance the script for those items, re-save it and hope I have not missed any items. Evey time his happens it is a hassle. Not to mention if more than one user needs it I have to make sure they are all using the right version (to be clear I am less worried about this part as it seems a complex task).
Is there a better way of doing this? What are the best practices for this? What external sources can be used to hold the data. I would be interested in any tutorials that may exist on the subject as well.
Thanks in advance for any/all help.
Tom
P.S. it is amazing what LCD can do, and that I really enjoy working in it, although I have little background in scripting. Great product and resource!

Thanks Paul,
I have been able to solve the drop down list question, thanks to your help.
I have another question that involves locking specific fields in a four page form which contains approximately 100 fields that need to be locked before the end user completes the remaining fields. How do I lock individual subforms so that the remaining fields remain open and editable? The final version of the form, will have at least 200 fields in it that will also need to be locked in sections.
I can lock all the fields using the lock all fields button, but have been unable to make it work for just part of the form.
I've emailed the draft form. It would be really helpful if I had one example of a locked subform on the form I'm struggling with.
Thanks for your help.
Nellie

ODBC driver does not appear in drop down list

We created a system DSN using Unix ODBCConfig and the drivers
supplied by IBM in its iSeries Access package. We are trying to
connect to our AS400. We now have Coldfusion installed on SuSe 9.3
Open Enterprise Server. Coldfusion runs fine. When we try to add a
data source in the ColdFusion administrator, the system DSN driver
that we configured does no show up in the drop down list. Did we
miss a step? We have done this succesfully with coldfusion on
Windows 2003 server.

What version of ColdFusion are you running? I know with MX 7,
your individual DSNs may not be listed, ODBC or otherwise, only the
driver types. You are prompted to provide a valid Data Source name,
then to select a valid driver type, which in your case would be
ODBC Socket.
Phil

How to Generate a report based on a drop-down list?

Good Afternoon,
I am looking for a way to create a drop down list/select list with the values '2008' and '2009'. Based on the value selected in the list, data will be displayed from a table.
In the table, there is January to December for 2008 and January to December of 2009. So when selecting '2008', I would like January to December 2008 to be displayed.
Thank you.

Hi,
Create a static LOV with the following source:
STATIC:2008,2009
Assuming your LOV is named P1_LOV your report SQL would look something like:SELECT * FROM TABLE WHERE DATE LIKE '%' || :P1_LOV || '%'

How can I restore the search bar drop down list and current search engine icon as it was in FF version 33?

Is there a way to restore the search bar from version 33?
I like seeing which search engine I have selected and the ability to change it with a drop down list BEFORE I highlight text, right-click, and select ' Search Google for "xxxx" '
Any way to roll back this latest "improvement"?

If you miss being able to switch search engines without going
crazy with menus, try this out;
'''[https://addons.mozilla.org/en-US/firefox/addon/context-search/ Context Search]''' {web link}
Expands the context menu's 'Search for' item into a list of
installed search engines, allowing you to choose the engine
you want to use for each search.

Triggering "exit" event of a drop-down list in all instances of a table row

I have a drop-down list in a table row with multiple instances that performs a calculation on the exit event. This calculation draws information from 2 other dropdown lists contained above in non-repeating rows of the same table.
The desired behavior is: should the user change their choices above, all instances of the drop-down list below would perform the "Exit" event script accessing the new values above.
My script is:
RowOptionalCoverage.DdlCoverageType.execEvent("exit");     this works, sort of
It only updates the first instance of RowOptionalCoverage and none of the subsequent instances. The user can "Tab" through the instances and trigger the Exit event for each instance, but this is not a reasonable solution.
I have tried using the resolveNodes method without success. I understand, using the resolveNodes method may be necessary when referencing multiple instances of an object:
this.resolveNodes("RowOptionalCoverage[*].DdlCoverageType[*]").execEvent("exit");     doesn't work
xfa.resolveNodes("RowOptionalCoverage[*].DdlCoverageType[*]").execEvent("exit");      doesn't work
No doubt, I must be using the resolveNodes incorrectly or missing something? Probably something simple.
Any advice is greatly appreciated.
Stephen

PERFECT!!! Works right out of the box!
This has opened my eyes to the essential nature of loops. My form is very large and complex and functions correctly, Yet the coding is lacking in sophistication--no loops, functions, fragments or other code efficiencies. I am teaching myself (with the help here) and I have skipped learning and using some techniques when I could things to work using the limited skill set I have.
Sometimes, I just don't "get it". After I fail a few times, I skip it and try something else. Functions are a great example. I could utilize a bunch of these if I could only write one that works. It is frustrating. If I got one to work, I know could write a ton of them. But, there is some essential part of functions I am missing that's preventing me from having my first success with them. (I think it has to do with not understanding arguments completely).
Anyway, I am overjoyed with the solution you provided and I understand it well enough to be able to use again in other situations.
Thanks again!
Stephen

Drop Down list in BPC Input Schedule

Hi all,
In an input schedule I need to have some values "controlled", and allow to give a value only among a list of specific values. So I came up on the idea to builld it using cell "validation" feature of native Excel, just like I have been able to find in [this thread|Re: Regarding the Function.......] (by the way, great the hint about using name's ranges for being able to define the list in a different sheet than where it is being used).
So, I need to achieve one more thing. Let's say that the values I must include in the list are not numerical values, but alphanumerical, so I must combine in the schedule the alphanumerical value with the numerical value it represents. I have played around with excel and BPC formulas for quite a while already but cannot get it to work. Anybody has implented it?
Regards,
Rafael
PS: I get to define the drop down list of values in a cell and get it to write the corresponding numerical value in another cell referenced by a EvSND, but this only works in one direction (the cell does not get updated when I change the current view for example).

Hi Rafael,
I've done something similar.
In one cell I've put a drop down list, using Excel's data validation. The members in the list are human-readable text values, so the user can select one of these descriptive values.
In a second cell, these text values are transcoded into numeric values, thanks to function VLOOLUP. This cell is in the data range of an EvDRE expansion area, so when the user saves data the numeric value gets written to the back-end.
In a 3rd cell I fetch the numeric value currently saved on the server, via an EvGET.
In a 4th cell, I transcode that value into the corresponding text value, using another VLOOKUP function.
Finally, I've used function AFTER_REFRESH to read the content of the 4th cell, and set the value of the drop-down cell to that value. The VBA instruction to do the latter thing is something similar to:
ActiveCell.FormulaR1C1 = <the value of the 4th cell>
This way, the drop-down entry selected by default after refreshing data is the value currently stored on the server.
However I still miss something. I've set the Excel validation only in the 1st cell of the 1st row, and I want that the EvDRE expansion copies the validation to all other cells in all rows resulting from expansion. But this does not happen! Validation is not copied during expasion.
How's that? Everything else is copied--values, formats, formulas. Why validation is not copied?
* UPDATE
I've solved this issue. The solution is described here:
http://scn.sap.com/thread/3209213
Rafael Moreno wrote:
Hi Ethan,
yes, you are right, with VLOOKUP you get the information I want, but only in ONE direction. By "one direction" I mean that I can get in the cell with the VLOOKUP the text I want by reading a (numerical) value from a different referenced cell. But I would also need to be able of changing value in that same cell (by picking up one of those text values from a drop down list) and having the corresponding numerical value written on the referenced cell. Can you see the difference?
In few words, I would need a cell to read and write a value (just as the raw EvSND allows), but converting the numerical value into its corresponding text value.
Regards,
Rafael
Message was edited by: Davide Cavallari

Drop down list in Table Control - Value disappeared after pressing ENTER

Dear Gurus,
I have a problem in one of my development where I used a table control in which one field is a drop down list.
I used VRM_SET_VALUES and VRM_GET_VALUES for populating the values from the programand not use any domain level value table for that field.
My problem is when I select one value from this list , and pressing enter , the value get disappeared. But if I use a domain for this field with value table then everything working properly.
My doubt is am I doing some miss coding or using the VRM_ function modules improperly ?
I am sharing some code with you
in PAI :
CALL FUNCTION 'VRM_GET_VALUES'
    EXPORTING
      id            = 'ITAB-FIELD3'    "This is drop down list element on screen
    IMPORTING
      values        = values[]    " even it is not the expor parameter...it will work..
   EXCEPTIONS
     id_not_found   = 1
     OTHERS         = 2.
IF sy-subrc NE 0.
No sy-subrc check required.
ENDIF.
IN PBO
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            id     = 'IVBAP-ERNAM'
            values = values[].
Can you please help me.
Thanks .

HI,
The link contains the list box creation, just check if this might help.
Re: Getting values back from a listbox.
Regards and Best wishes.

Drop-Down List in interactiveForm

Hello everybody
I've just started using interactiveForm and I've a little doubt, I've a drop-down list linked to a node of the context.
I would like to bind an action on the selection of the drop-down list that must update another field/context element.
I explain better:
I ve a list of values/points
A 2
B 1
C 3
etc..
in my list I must have A/B/C
I've a field "points"
When I select A , point must be updated to "2"
When I select B , point must be updated to "1"
Is it possible? how? I'm looking on documentation but I'm not able to find the binding with an action.
Thank you,
Serena

yes, but I wasn't able to pass throught the onCheck.
I try to explain better.
I've the drop down list, with some values.
I've bind the onCheck of my form with an action so in the property of the form I've:
EVENT
property: onCheck value: checkType
and in my code the method
public void onActioncheckType(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
that just print a screen message.
Now when I change the value in my dropDown, I don't have the message so I think I miss a point: how to tell the dropdown to call the onCheck when I change the value.

Drop down list in sourcing missing

Similar Messages

Maybe you are looking for