Drop Down Menu Component

I have completed a tutorial for a drop down menu. I test the
movie and clicking on a submenu item named Save under a main menu
heading named File and using a trace action, correctly identifies
the item as shown in the attached code. However, I don't know how
to use this result to then proceed to a movie clip named "Save".
(These are just sample names for my trials.) I would have thought
if I put a movie clip named Save with a frame label "Save", I could
just replace the trace (e) code with gotoAndPlay(e); The logic is
working to a point, as when I do this, I get a compiler error
saying there is no label "Save" on Scene 1, so Flash is attempting
to find the correct target. This is the compiler message
"[MenuEvent type="itemSelected" bubbles=false cancelable=false
eventPhase=2 menuIndex=0 menuLabel="File" itemIndex=1
itemLabel="Save"]
ArgumentError: Error #2109: Frame label [MenuEvent
type="itemSelected" bubbles=false cancelable=false eventPhase=2
menuIndex=0 menuLabel="File" itemIndex=1 itemLabel="Save"] not
found in scene Scene 1.
at flash.display::MovieClip/gotoAndPlay()
at test_fla::MainTimeline/handleItemSelected()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at
fl.example::MenuBar/fl.example:MenuBar::menuMouseHandler()"
I am wondering if a frame label and an indexLabel are two
different things?
I am using Action Script 3 strictly. Anybody out there with
any ideas?
Thank you.

Can you post a link to an example page where the menu is duplicated? Also, what version of GoLive are you using? The first thing that comes to mind is that the ID that the script relies on is being changed by GoLive to make it unique for each Component... why that results in it being duplicated I don't know yet, unless the script doesn't find what it's looking for, and then generates it automatically.

Similar Messages

Drop-down menu cut off by Flash component

Hi,
I am using Flash CS3.
I have a drop-down menu and a Flash component immediately
below it. When I hover over the menu item, it opens downwards but
gets cut off by the Flash component.
This doesn't happen if I replace the Flash component with a
picture.
Any advice what could be done will be much
appreciated.

Adding parameter wmode="transparent" to both Flash parameter
tags and embed tag solved this issue for me.

Error due to drop down menu in the dataTable

I have a data table which has a drop down menu in one of the table columns. When the drop down menu is disabled, every action in the page works (click on it, and it does what it does). When the drop down menu is enabled, every action (with one exception) in the page does not work (click on it, it refreshes the page, but the action is not fired). I cannot debug the thing because the action is not fired at all.
The exception is that for buttons that is marked as immediate, it works. I created an inline message, and wire that to the dropdown menu. I do not see any error. Looking into the log file, I do not see anything.
I was suspecting maybe conversion error. The data value for the drop down menu is integer (I try both setting the convert to integer and nothing). Even there's error in conversion, there should be error message showing up (in the inline message box).
So, again, how do I diagnos this, and to find out what is going on?
Thank you very much.
Vh.

Thank you for your attention.
The bug link is:
https://javaserverfaces.dev.java.net/issues/show_bug.cgi?id=51
I thought I could add attachment afterward, but I couldn't. Please add these for me:
//////////////////////////////////////////////////// Page3.jsp //////////////////////////////////////////////////////////////////
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
 <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
 <f:view>
 <html lang="en-US" xml:lang="en-US">
 <head>
 <meta content="no-cache" http-equiv="Cache-Control"/>
 <meta content="no-cache" http-equiv="Pragma"/>
 <title>Page3 Title</title>
 <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
 </head>
 <body style="-rave-layout: grid">
 <h:form binding="#{Page3.form1}" id="form1">
 <h:dataTable binding="#{Page3.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd"
 style="height: 111px; left: 60px; top: 120px; position: absolute" value="#{Page3.dataTable1Model}" var="currentRow" width="360">
 <h:column binding="#{Page3.column1}" id="column1">
 <h:outputText binding="#{Page3.outputText1}" id="outputText1" value="#{currentRow.c1}"/>
 <f:facet name="header">
 <h:outputText binding="#{Page3.outputText2}" id="outputText2" value="column1"/>
 </f:facet>
 </h:column>
 <h:column binding="#{Page3.column2}" id="column2">
 <h:outputText binding="#{Page3.outputText3}" id="outputText3" value="#{currentRow.c2}"/>
 <f:facet name="header">
 <h:outputText binding="#{Page3.outputText4}" id="outputText4" value="column2"/>
 </f:facet>
 </h:column>
 <h:column binding="#{Page3.column3}" id="column3">
 <f:facet name="header">
 <h:outputText binding="#{Page3.outputText6}" id="outputText6" value="column3"/>
 </f:facet>
 <h:selectOneMenu binding="#{Page3.dropdown1}" converter="#{Page3.integerConverter1}" id="dropdown1" value="#{currentRow.c3}">
 <f:selectItems binding="#{Page3.dropdown1SelectItems}" id="dropdown1SelectItems" value="#{Page3.dropdown1DefaultItems}" />
 </h:selectOneMenu>
 </h:column>
 </h:dataTable>
 <h:outputText binding="#{Page3.outputMesg}" id="outputMesg" style="height: 32px; left: 240px; top: 50px; position: absolute; width: 180px"/>
 <h:outputText binding="#{Page3.outputText8}" id="outputText8" style="height: 30px; left: 60px; top: 50px; position: absolute; width: 162px" value="Message:"/>
 <h:commandButton action="#{Page3.button1_action}" binding="#{Page3.button1}" id="button1"
 style="height: 25px; left: 300px; top: 260px; position: absolute; width: 109px" value="Say Hello"/>
 <h:message binding="#{Page3.inlineMessage1}" errorClass="errorMessage" fatalClass="fatalMessage" for="dropdown1" id="inlineMessage1"
 infoClass="infoMessage" showDetail="false" showSummary="true"
 style="height: 102px; left: 60px; top: 300px; position: absolute; width: 360px" warnClass="warnMessage"/>
 <h:outputText binding="#{Page3.outputText5}" id="outputText5" style="height: 30px; left: 60px; top: 260px; position: absolute; width: 120px" value="Error Message:"/>
 </h:form>
 </body>
 </html>
 </f:view>
</jsp:root>//////////////////////////////////////////////////// Page3.java //////////////////////////////////////////////////////////////////
* Page3.java
* Created on August 10, 2004, 10:35 AM
* Copyright hovh
package webapplication1;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import javax.faces.component.html.*;
import com.sun.jsfcl.data.*;
import java.util.*;
import javax.faces.component.*;
import javax.faces.convert.*;
public class Page3 extends AbstractPageBean {
 // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
 private int __placeholder;
 private HtmlForm form1 = new HtmlForm();
 public HtmlForm getForm1() {
 return form1;
 public void setForm1(HtmlForm hf) {
 this.form1 = hf;
 private HtmlDataTable dataTable1 = new HtmlDataTable();
 public HtmlDataTable getDataTable1() {
 return dataTable1;
 public void setDataTable1(HtmlDataTable hdt) {
 this.dataTable1 = hdt;
 private DefaultTableDataModel dataTable1Model = new DefaultTableDataModel();
 public DefaultTableDataModel getDataTable1Model() {
 return dataTable1Model;
 public void setDataTable1Model(DefaultTableDataModel dtdm) {
 this.dataTable1Model = dtdm;
 private UIColumn column1 = new UIColumn();
 public UIColumn getColumn1() {
 return column1;
 public void setColumn1(UIColumn uic) {
 this.column1 = uic;
 private HtmlOutputText outputText1 = new HtmlOutputText();
 public HtmlOutputText getOutputText1() {
 return outputText1;
 public void setOutputText1(HtmlOutputText hot) {
 this.outputText1 = hot;
 private HtmlOutputText outputText2 = new HtmlOutputText();
 public HtmlOutputText getOutputText2() {
 return outputText2;
 public void setOutputText2(HtmlOutputText hot) {
 this.outputText2 = hot;
 private UIColumn column2 = new UIColumn();
 public UIColumn getColumn2() {
 return column2;
 public void setColumn2(UIColumn uic) {
 this.column2 = uic;
 private HtmlOutputText outputText3 = new HtmlOutputText();
 public HtmlOutputText getOutputText3() {
 return outputText3;
 public void setOutputText3(HtmlOutputText hot) {
 this.outputText3 = hot;
 private HtmlOutputText outputText4 = new HtmlOutputText();
 public HtmlOutputText getOutputText4() {
 return outputText4;
 public void setOutputText4(HtmlOutputText hot) {
 this.outputText4 = hot;
 private UIColumn column3 = new UIColumn();
 public UIColumn getColumn3() {
 return column3;
 public void setColumn3(UIColumn uic) {
 this.column3 = uic;
 private HtmlOutputText outputText6 = new HtmlOutputText();
 public HtmlOutputText getOutputText6() {
 return outputText6;
 public void setOutputText6(HtmlOutputText hot) {
 this.outputText6 = hot;
 private HtmlOutputText outputMesg = new HtmlOutputText();
 public HtmlOutputText getOutputMesg() {
 return outputMesg;
 public void setOutputMesg(HtmlOutputText hot) {
 this.outputMesg = hot;
 private HtmlOutputText outputText8 = new HtmlOutputText();
 public HtmlOutputText getOutputText8() {
 return outputText8;
 public void setOutputText8(HtmlOutputText hot) {
 this.outputText8 = hot;
 private HtmlCommandButton button1 = new HtmlCommandButton();
 * Holds value of property tableData.
 private ArrayList tableData;
 public HtmlCommandButton getButton1() {
 return button1;
 public void setButton1(HtmlCommandButton hcb) {
 this.button1 = hcb;
 private HtmlSelectOneMenu dropdown1 = new HtmlSelectOneMenu();
 public HtmlSelectOneMenu getDropdown1() {
 return dropdown1;
 public void setDropdown1(HtmlSelectOneMenu hsom) {
 this.dropdown1 = hsom;
 private DefaultSelectItemsArray dropdown1DefaultItems = new DefaultSelectItemsArray();
 public DefaultSelectItemsArray getDropdown1DefaultItems() {
 return dropdown1DefaultItems;
 public void setDropdown1DefaultItems(DefaultSelectItemsArray dsia) {
 this.dropdown1DefaultItems = dsia;
 private UISelectItems dropdown1SelectItems = new UISelectItems();
 public UISelectItems getDropdown1SelectItems() {
 return dropdown1SelectItems;
 public void setDropdown1SelectItems(UISelectItems uisi) {
 this.dropdown1SelectItems = uisi;
 private IntegerConverter integerConverter1 = new IntegerConverter();
 public IntegerConverter getIntegerConverter1() {
 return integerConverter1;
 public void setIntegerConverter1(IntegerConverter ic) {
 this.integerConverter1 = ic;
 private HtmlMessage inlineMessage1 = new HtmlMessage();
 public HtmlMessage getInlineMessage1() {
 return inlineMessage1;
 public void setInlineMessage1(HtmlMessage hm) {
 this.inlineMessage1 = hm;
 private HtmlOutputText outputText5 = new HtmlOutputText();
 public HtmlOutputText getOutputText5() {
 return outputText5;
 public void setOutputText5(HtmlOutputText hot) {
 this.outputText5 = hot;
 // </editor-fold>
 public Page3() {
 // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
 try {
 dropdown1DefaultItems.setItems(new String[] {"1", "2", "3"});
 } catch (Exception e) {
 log("Page3 Initialization Failure", e);
 throw e instanceof javax.faces.FacesException ? (FacesException) e : new FacesException(e);
 // </editor-fold>
 // Additional user provided initialization code
 tableData = new ArrayList();
 tableData.add(new webapplication1.TableEntry("c1_1", "c2_1", 1));
 tableData.add(new webapplication1.TableEntry("c1_2", "c2_2", 2));
 tableData.add(new webapplication1.TableEntry("c1_3", "c2_3", 3));
 this.dataTable1Model.setWrappedData(tableData);
 protected webapplication1.ApplicationBean1 getApplicationBean1() {
 return (webapplication1.ApplicationBean1)getBean("ApplicationBean1");
 protected webapplication1.SessionBean1 getSessionBean1() {
 return (webapplication1.SessionBean1)getBean("SessionBean1");
 * Bean cleanup.
 protected void afterRenderResponse() {
 * Getter for property tableData.
 * @return Value of property tableData.
 public ArrayList getTableData() {
 return this.tableData;
 * Setter for property tableData.
 * @param tableData New value of property tableData.
 public void setTableData(ArrayList tableData) {
 this.tableData = tableData;
 public String button1_action() {
 // User event code here...
 this.outputMesg.setValue("Hello world!");
 return null;
}//////////////////////////////////////////////////// TableEntry.java //////////////////////////////////////////////////////////////////
* TableEntry.java
* Created on September 3, 2004, 2:38 PM
package webapplication1;
* @author hovh
public class TableEntry {
 String c1;
 String c2;
 int c3;
 String c3Str;
 public TableEntry(String c1, String c2, int c3){
 this.c1 = c1;
 this.c2 = c2;
 this.c3 = c3;
 public String getC1() {
 return c1;
 public void setC1(String c1) {
 this.c1 = c1;
 public int getC3() {
 return c3;
 public void setC3(int c3) {
 this.c3 = c3;
 public String getC2() {
 return c2;
 public void setC2(String c2) {
 this.c2 = c2;
 public java.lang.String getC3Str() {
 return "" + c3;
 public void setC3Str(java.lang.String c3Str) {
 this.c3Str = c3Str;
 try{
 c3 = Integer.parseInt(c3Str);
 }catch(Exception e){

How to create a button with the drop-down menu?

I want to create a button with the drop-down menu, which is like the 'back' on the tollbar in IE. I heard JPopupMenu can reach the certain result, but the button hadn't a down arrow. Who can help me?

i have made something like this :
//======================================================================
package com.ju.guiutils
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.util.Vector;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.plaf.basic.BasicComboBoxUI;
* @version 1.0 14/04/02
* @author Syed Arshad Ali [email protected] 
* Usage : ButtonsCombo basically performs function button + JComboBox, if we have different options for
* same button then we can use this ButtonsCombo.
* By the way there is no button at all in ButtonsCombo
public class ButtonsCombo extends JComboBox {
//===================================================================================
* Create ButtonsCombo with default combobox model
public ButtonsCombo () {
super ();
init ();
//===================================================================================
* Creates a ButtonsCombo that takes it's items from an existing ComboBoxModel.
public ButtonsCombo ( ComboBoxModel model ) {
super ( model );
init ();
//===================================================================================
* Creates a ButtonsCombo that contains the elements in the specified array.
public ButtonsCombo ( Object [] items ) {
super ( items );
init ();
//===================================================================================
* Creates a ButtonsCombo that contains the elements in the specified Vector.
public ButtonsCombo ( Vector items ) {
super ( items );
init ();
//===================================================================================
private void init () {
setBorder ( BorderFactory.createBevelBorder ( BevelBorder.RAISED ) );
setRenderer ( new ComboRenderer() );
setUI ( new ComboUI() );
addMouseListener ( new ComboMouseListener() );
//===================================================================================
* Set items for ButtonsCombo in the specified array
public void setItems ( Object [] items ) {
setModel ( new DefaultComboBoxModel( items ) );
//```````````````````````````````````````````````````````````````````````````````````
* Set items for ButtonsCombo in the specified Vector
public void setItems ( Vector items ) {
setModel ( new DefaultComboBoxModel( items ) );
//```````````````````````````````````````````````````````````````````````````````````
* Get current items in a array
public Object [] getItemsArray () {
ComboBoxModel model = this.getModel ();
if ( model != null ) {
int size = model.getSize ();
if ( size > 0 ) {
Object [] items = new Object[ size ];
for ( int i = 0; i < size; i++ ) {
items[ i ] = model.getElementAt ( i );
return items;
return null;
//```````````````````````````````````````````````````````````````````````````````````
* Get current items in a Vector
public Vector getItemsVector () {
ComboBoxModel model = this.getModel ();
if ( model != null ) {
int size = model.getSize ();
if ( size > 0 ) {
Vector itemsVec = new Vector();
for ( int i = 0; i < size; i++ ) {
itemsVec.addElement ( model.getElementAt ( i ) );
return itemsVec;
return null;
//===================================================================================
class ComboMouseListener extends MouseAdapter {
public void mouseClicked ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
public void mousePressed ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
ButtonsCombo.this.setBorder ( BorderFactory.createBevelBorder ( BevelBorder.LOWERED ) );
public void mouseReleased ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
ButtonsCombo.this.setBorder ( BorderFactory.createBevelBorder ( BevelBorder.RAISED ) );
//===================================================================================
class ComboRenderer extends JLabel implements ListCellRenderer {
//````````````````````````````````````````````````
public ComboRenderer () {
setOpaque ( true );
//````````````````````````````````````````````````
public Component getListCellRendererComponent ( JList list, Object value, int index, boolean isSelected, boolean cellHasFocus ) {
setBackground ( isSelected ? Color.cyan : Color.white );
setForeground ( isSelected ? Color.red : Color.black );
setText ( ( String )value );
return this;
//````````````````````````````````````````````````
//===================================================================================
// We have to use this class, otherwise we cannot stop JComboBox's popup to go down
class ComboUI extends BasicComboBoxUI {
public JButton createArrowButton () throws NullPointerException {
try {
URL url = getClass ().getResource ( "/images/comboarrow.gif" );
JButton b = new JButton( new ImageIcon( url ) );
b.addActionListener ( new ActionListener() {
public void actionPerformed ( ActionEvent ae ) {
return b;
} catch ( NullPointerException npe ) {
throw new NullPointerException( "/images/comboarrow.gif not found or /images folder not in classpath" );
catch ( Exception e ) {
e.printStackTrace ();
return null;
//======================================================================
you can cutomize this according to your requirement , okie ;)

How to create a sort of drop down menu at mouse location please?

Hello,
I would like to create a sort of drop down menu. When the user right clicks, I would like to create something similar as if you right click in your browser, or right click in this forum text box area (you get "undo", "copy", "paste".. that appears right next to the mouse).
What Swing class would you use for that please?
Thank you very much.

Use a JPopupMenu
You will need to add a MouseListener that shows it to the component you want to display it on.

Triggering a database query and region update from drop-down menu selection

I suspect this must be covered somewhere in some how-to or documentation but Google hasn't been of much help here:
A user is filling in a form. The first entry in the form is a drop-down menu. Upon the user selecting a value in the menu I would like to query existing entries in the DB and present results to the user, in a region to the right hand-side of the form, as guidance (i.e.: "here's what we already have for this component").
I am unclear as to whether I should be using computations, javascript or a combination of both here. Pointers welcome. Thanks in advance.

Hello,
Take a look at this example, it does what you want.
http://apex.oracle.com/pls/otn/f?p=11933:48
Regards,
Carl
blog : http://carlback.blogspot.com//
apex examples : http://apex.oracle.com/pls/otn/f?p=11933:5

Flash Drop Down Menu

Hi all
I am learning ActionScript 2.0 for about 6 months and I have
created a flash based website. My question is how to allow a drop
down menu to animate outside of a Shockwave files boundaries.
I have seen Flash menus that do this and also I have
seen some banner ads that allow animation to display outside of the
swf file.
Is there any tutorials or information out there that I can
learn, or could somebody give me an idea of what to do. I
understand how to use the Menu component and how to create a
regular drop down menu within the boundaries of a swf file
javono
www.javono.com

you can't visibly animate flash objects outside the stage
boundaries. you can appear to do so using div tags so that's what
you should check.

Safari drop down menu transparent, can't read anything

For the past several months, the suggestion drop down menu in Safari has been extremely transparent and impossible to read. Running OS X 10.10 and Safari 8.0.3. on a MacBookPro 13in Mid-2012
Not really sure how to fix this.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1274 ' 0.5 0.25 50 1000 15 5120 1000 25000 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 500 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<13;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"9\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"10\f%@d\f%s\f%d\f%d\n\",@d);printa(\"11\f%@d\f%s\f%d\f%d\n\",@e);printa(\"12\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,user/$UID} -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {Daemons,Agents}\ {load,disabl}ed {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 83 114;j=$?;for i in 0 1;do ((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74;B7 11;B4 0 0 11;C3 23+2*i;D4 24+2*i 14 66+i 92+i;done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 84 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
 Part 1 of 8 done at … sec
 Part 8 of 8 done at … sec
 The test results are on the Clipboard.
 Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Is there a way to create a drop down menu with an automatic answer dependent on what is chosen?

Is there a way to create a drop down menu with an automatic answer dependent on what is chosen? An if-then statement perhaps? I am looking to add over 100 drop down options and would like to have a message automatically pop up depending one which option they chose. Thank you.

Hi,
You would use the skip logic to conditionally show form items based on the selection within the drop-down menu. Here's a link to a description of the feature in our help documentation:
http://help.adobe.com/en_US/formscentral/using/WSd789abd336388b1642c7fce012da94afe4f-8000. html#WS0faeceb8c23f5d60-774f03e3131ddc76d7d-8000
Regards,
Brian

In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

Hi Bruce and fruhulda,
ok, I found the keyboard viewer, it only shows the traditional symbol 'return'. something like a sideway u-turn continued with the arrow under. This is the Canadian or US keyboard.
btw thanks for your suggestion.

Trying to create a drop down menu in numbers...please help

Hi
Can anyone indicate how to go about creating a drop-down menu.
Thanks in advance

Hi Meela,
Welcome to Apple Discussions and the Numbers 08 forum.
Check page 66 of the Numbers User Guide supplied with your copy of iWork. The guide refers to them as "pop-up" menus, so a search using "pop-up" will be more successful than one using "drop down".
Essentially the process is:
Click on the cell to select it.
Open the Inspector and choose Cell Format (icon is a cell containing 42)
Click the Cell Format menu and select Pop-up Menu from the bottom of the list.
Double click an item in the list to edit it. Click the + button to add an item, the - button to delete the selected item.
Done.
Regards,
Barry

Mail can not open, blocked by drop down menu

Mail will not open. Drop down menu says: To view this page you need to log in to area "www.outlookmail.com" on www.outlookmail.com:443 Then it asks for my name and password.
I click cancel and the drop down exits and reappears. Do I have a virus? Now what?

Hi Jo ann,
I just got that on popping on my email saying the same thing" www.outlookmail.com:443" to sign in.
what did you do to fix it? what is it -is it? is it a virus?
can you please let me know what i should do
I appreciate that, thank you.
geraldsmagic from Ca.

Contacts drop-down menu blocked by on screen keyboard in text messages

Whenever I draft a new text message I put the cursor in the contact box and type the first letter of the name of the person I am trying to contact. If I have more than 3 people in my phone whose names start with that letter, the drop down menu becomes partially obscured by the on screen keyboard. If I attempt to scroll down on the menu, it selects whomever I happen to press. My attempts to minimize the keyboard have been futile. I understand I can work around this by going into contacts and selecting someone to text, but the problem is pretty aggravating. Please help!

Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

It won't let me share my movie. Nothing happens when I click "share" or even in the drop down menu. I don't get options. HELP! I need this video by tonight!

I have worked with iMoive a ton and have never had an issue. I consider myself pretty computer savvy. This new iMovie is not my friend. It will not let me share my new video. I click on the project and click "share" like it says but I don't receive any further prompt. It literally does nothing. I tried the drop down menu and I see the "share" with an arrow indicating there are options but no drop down menu appears. I need this video by tonight to submit for work. HELP!

I got it to share! No reloading iMovie!
I do not have Mackeeper on my laptop
I have the movie files on an external hard drive
1. Close out iMovie
2. Eject the external hard drive
3. Start up iMovie
4. Plug in the external hard drive
5. Go into finder and double click on the folder containing the movie
6. Select the movie as if to edit
7. Share it!
I hope this works for you too

Add value entered in a text box to drop down menu options

hi everyone
i am making a pdf form for medical imaging report. i have a text box where the users enters a number, i want this entered number to appear within a drop down menu options
thanks

Hi Alexander,
I can explain you the details there is a list as you mentioned Newsletter with a column email in it you are right but for your answer ya i can use enforce unique values for that column but if i am using it it gives me an error in the next page what i want
is just beside my text box to say that already registered user.I want that functionality that is what i meant.
Thanks
Eswar
Eswar Chand Teki

Drop Down Menu Component

Similar Messages

Maybe you are looking for