Drop-Down Warning
I am attempting to create a drop-down of Texas Counties. There are 254 of them. When I created a drop-down object and attempt to add a number of entries above a certain amount the drop-down object is tagged with a yellow box containing "ABC!" and any mouse over of the new object in LCD results in a message box with "An invalid argument was encountered". The resulting drop down works fine on the saved form, but the warnings in LCD are annoying. I am using LCD ES2 version 9.0.0.2.20101008.1.734229. How can I solve this problem?
I tried to replicate the scenario with LC designer 8.2 but unable to reproduce. Since i dont have the latest version i tried with 8.2.
My suggestion is to check the error/logs tab in the designer or reinstall the designer.
Thanks.
Similar Messages
-
Quick Cluster no longer appears in drop down lists
I haven't changed any settings, one day my cluster just disappears off all the lists it used to appear in (selecting which cluster to use in Compressor, Compressor Droplets and Shake)
Now all that shows is "My Computer".
The QuickCluster wasn't anything special, it was just a local cluster with 16 instances (all on my own computer) to take advantage of the many cores in my machine, unlike My Computer which runs a single thread and uses only an eighth of my available processing power.
Reinstall? Something backend? Force Refresh somewhere I'm unfamiliar with?
I've had my fair share of Qmaster/Compressor problems in the past, but this time I'm not having any trouble finding my cluster in Qadministrator, my Qmaster System Prefs aren't greyed out or anything, the only thing I can think of is my recent update to 10.6.3, but I can't be sure that was the trigger.Do you have any issue with just creating a regular cluster? instead of a quick cluster? it's not hard and much more reliable. Follow the steps below (this was originally written for multiple computers so if something references multiple computers, sorry- I did my best to edit my previous post to somebody else)
Stop All services in the Qmaster Prefs window.
Under the "setup" tab, Click the middle Bubble "Services and cluster controller". In the "services" section next to compressor check both "share" and "managed" boxes. Options for selected services, click and set as high (or low) as you want. More = Faster, Less = slower but sometimes more stable depending on your RAM.
In the advanced tab, delete files older than : 7 days should suffice unless space is a problem. make it smaller.
Reset the services by holding option and clicking the "start services" and then hit ok on drop-down warning that will show up. Release option and click "Start Sharing".
Open "Apple Qadministrator". On the upper-left field are the actual Clusters (shouldn't be anything there). click the "+" symbol and create a cluster, Name it whatever you want. On the lower field (Qmaster Service Browser, May be hidden, just click the grey triangle to the left to drop down the field) there should be a list of the computers you have available to cluster. Click on the cluster you just created, Select all the computer in the Qmaster Service browser, and drag it into the upper right field, anywhere in the rectangle. The outer edge should highlight with a thick black bar. release and the computer should move into that field and out of the Qmaster Services Browser.
Click on the "Controller" drop-down menu and Select the controller. When you hit Apply, the "Storage:" Field (directly under the "Controller" drop-down box) should change to reflect the storage location you set in the Qmaster Preferences. When you do this, you have created a cluster.
When you send out of compressor - make sure you are either sending Quick time reference files (you shouldn't have any issues with that) or quicktime self-contained files.
You CANNOT "Export to compressor..." from final cut. You CANNOT have your timeline open and do the usual "file>export>using compressor...". You MUST export a QuickTime reference (faster by only using render referenced files. THE TIMELINES MUST BE FULLY RENDERED, option+R instead of Cmd+R) or QT Self-Contained File (slower but more reliable as every frame is rendered. This can triple your time).
It's an extra step up front, but the transcoding time is SIGNIFICANTLY faster - and you can continue working in final Cut on other projects.
Let me know if you need further assistance. -
CRASH REPORT
Product: Adobe Photoshop CC
Application running on:
Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
Application crashes without warning. Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit required to quit unresponsive / frozen application and then Restart of Adobe Photoshop CC
Crash Frequency: Three time in this work day, 5.6.14 Once a day sporadically (approximately 10 times) in past two weeks.
Other applications running at time of crashes: Adobe Bridge - NOT effected. Computer was on line with no browsers open.
Otherwise computer continued to operate normally.
I have been using Adobe Photoshop CC for approximately two months.Thanks, Chris,
I hope that this is the solution.
re: "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
I did in deed submit a homemade crash report.
I would have submitted "an actual Crash Report " and sooner, but: When this event occurs. there are NO dialog boxes. All frozen / blank. No possibility of "actual crash report" !
Thank you! -
Question: My computer shuts down while I am pausing briefly during use.. first display drop down box "RESTART, SLEEP, CANCEL, SHUTDOWN" warns me of shutdown coming.. If I do not hit cancel immediately, computer shuts down and I have to employ start up procedure each time.. very annoying.. I must admit that I am a novice user and suspect that there is some simple setting that I am overlooking.. however, I have gone through all the relevant settings in Apple System Preferences and cannot connect with one that solves this problem.. Any help greatly appreciated
I think it's time to buy a new battery
-
Warning about drop-down html widget
There's a widget to add a drop-down menu on iWeb pages that's available on this site:
<http://allaboutiweb.com/index.php/2009/04/add-a-drop-down-menu-to-your-iweb-pag es/>
It works! However, you can't change the color (pale blue) or the text style (small sans serif). When I tried and couldn't, I decided to ditch the widget.
Then I found out that I COULDN'T DELETE THE DROP-DOWN widget. It seems to have latched on to a Statcounter html widget in a way that I can't see it in the Statcounter code.
When I publish the page, the part of the drop-down menu I see is whatever fits the width of the widget window for Statcounter.
(Think of a medicine cabinet with two sliding doors. You can see the inside of cabinet if the door's not closed. Now picture the inside of the cabinet as your drop-down menu and the doors as your page background. It's as if the widget box is an open door. You can make it small, but you still see part of the drop-down menu behind it.)
I finally hid the entire widget behind a shape with 100% color fill.
Does anyone have a more elegant solution to this problem? And is there a drop-down widget out there that will allow you to change its style? Thank you.Let me show you what I mean. Here's the html for the statcounter widget from a page where there's no problem (I have only changed the security and project IDs).
<!-- Start of StatCounter Code -->
<script type="text/javascript">
var sc_project=0000000;
var sc_invisible=1;
var sc_partition=58;
var scclickstat=1;
var sc_security="aaaaaaaa";
</script>
<script type="text/javascript"
src="http://www.statcounter.com/counter/counter.js"></script><noscript></noscript>
<!-- End of StatCounter Code -->
Here's the code from the page where there is a problem.
<!-- Start of StatCounter Code -->
<script type="text/javascript">
var sc_project=0000000;
var sc_invisible=1;
var sc_partition=58;
var scclickstat=1;
var sc_security="aaaaaaaa";
</script>
<script type="text/javascript"
src="http://www.statcounter.com/counter/counter.js"></script><noscript></noscript>
<!-- End of StatCounter Code -->
See? Identical.
Now here's the html for the drop-down menu:
<FORM NAME="URLlist">
<SELECT NAME="droplist">
<OPTION SELECTED="SELECTED" VALUE=" ">Select a page.</OPTION>
<OPTION VALUE="http://www.thefirstURL.com">A Page Name</OPTION>
<OPTION VALUE="http://www.anotherURL.com">Another Page Name</OPTION>
<OPTION VALUE="http://www.anotherURL.com">Another Page name</OPTION>
</SELECT><INPUT TYPE="BUTTON" VALUE="Go!" ONCLICK="GotoURL(this.form)">
<SCRIPT LANGUAGE="JavaScript">
<!--
function GotoURL(dl) {
// FRAMES - To open a selection in a document that uses frames
// change top.location.href to parent.putyourframenamehere.location.href
top.location.href = dl.droplist.options[dl.droplist.selectedIndex].value;
// -->
</SCRIPT>
</FORM>
So then--How would you get rid of the drop-down html code when it isn't visible anywhere on your iWeb pages? -
Fetching values from database into a drop down box
in my JSP page there are 3 drop down boxes for date of birth......
what i need is i want to get the values from database into that drop down box when i access the JSP page.......
session is there....'m getting all other values.......
I will attach the JSP page.....
Please help me...........
Thanks in Advance......
<%@ taglib uri='/WEB-INF/taglib/struts-bean.tld' prefix='bean'%>
<%@ taglib uri='/WEB-INF/taglib/struts-logic.tld' prefix='logic'%>
<%@ taglib uri='/WEB-INF/taglib/dyna.tld' prefix='dyna'%>
<%@ taglib uri='/WEB-INF/taglib/struts-html.tld' prefix='html'%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title><bean:message key="page_title"/></title>
<link href="<bean:message key="context"/>/CSS/default.css" rel="stylesheet" type="text/css" />
<script src="<bean:message key="context"/>/js/AC_RunActiveContent.js" type="text/javascript"></script>
<link href="<bean:message key="context"/>/CSS/screen.css" rel="stylesheet" type="text/css" />
</head>
<body>
<%!
Membership mShip = null;
%>
<script language="javascript" >
function checkDate(Form){
var d;
d = Form.year.value+"-"+Form.month.value+"-"+Form.day.value;
alert("Date is:"+d);
Form.dob.value = d;
</script>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td>
<jsp:include flush="true" page="../templates/header.jsp"/> </td>
</tr>
<tr>
<td class="menuTD">
<jsp:include flush="true" page="../templates/menu.jsp"/> </td>
</tr>
<tr>
<td class="sub_menuTR"> </td>
</tr>
<tr>
<td><table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td class="column" valign="top" width="170"><jsp:include flush="true" page="../templates/left_panel.jsp"/></td>
<td valign="top" align="left">
<dyna:message error="error" warning="warning" message="message"/>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="80%" valign="top" align="left">
<%
if(session != null){
mShip = (Membership)session.getAttribute("member");
%>
<form action="updateContactDetails.dy" method="post" name="form1">
<input type="hidden" name="m" value="<%=request.getParameter("m")%>" />
<table width="100%" border="0">
<tr>
<td>First Name</td>
<td><input name="first_name" type="text" id= "first_name" value = "<bean:write name = "member" property = "first_name" />" /></td>
</tr>
<tr>
<td>Last Name </td>
<td><input name="last_name" type="text" id="last_name" value = "<bean:write name = "member" property = "last_name" />" > </td>
</tr>
<tr>
<td>Address</td>
<td><input name="address1" type="text" id="address1" value = "<bean:write name = "member" property = "address1" />" ></td>
</tr>
<tr>
<td> </td>
<td><input name="address2" type="text" id="address2" value = "<bean:write name = "member" property = "address2" />" ></td>
</tr>
<tr>
<td>Suburb/City </td>
<td><input name="city" type="text" id="city" value= "<bean:write name = "member" property = "city" />" ></td>
</tr>
<tr>
<td>State/Territory</td>
<td><input type="text" name="state" value = "<bean:write name = "member" property = "state" />" ></td>
</tr>
<tr>
<td>Postcode</td>
<td><input type="text" name="postcode" value = "<bean:write name = "member" property = "postcode" />" ></td>
</tr>
<tr>
<td>Contact Phone</td>
<td><input type="text" name="home_phone" value = "<bean:write name = "member" property = "home_phone" />" ></td>
</tr>
<tr>
<td>Mobile</td>
<td><input type="text" name="mobile" value = "<bean:write name = "member" property = "mobile" />" ></td>
</tr>
<tr>
<td>Date of birth</td>
<td nowrap="nowrap"><select name="day">
<option>Day</option>
<option value="01">1</option>
<option value="02">2</option>
<option value="03">3</option>
<option value="04">4</option>
<option value="05">5</option>
<option value="06">6</option>
<option value="07">7</option>
<option value="08">8</option>
<option value="09">9</option>
<option value="10">10</option>
<option value="11">11</option>
<option value="12">12</option>
<option value="13">13</option>
<option value="14">14</option>
<option value="15">15</option>
<option value="16">16</option>
<option value="17">17</option>
<option value="18">18</option>
<option value="19">19</option>
<option value="20">20</option>
<option value="21">21</option>
<option value="22">22</option>
<option value="23">23</option>
<option value="24">24</option>
<option value="25">25</option>
<option value="26">26</option>
<option value="27">27</option>
<option value="28">28</option>
<option value="29">29</option>
<option value="30">30</option>
<option value="31">31</option>
</select>
<select name="month">
<option>Month</option>
<option value="01">January</option>
<option value="02">February</option>
<option value="03">March</option>
<option value="04">April</option>
<option value="05">May</option>
<option value="06">June</option>
<option value="07">July</option>
<option value="08">August</option>
<option value="09">September</option>
<option value="10">October</option>
<option value="11">November</option>
<option value="12">Decembber</option>
</select>
<select name="year" onChange = "checkDate(this.form);" >
<option>Year</option>
<option value="1957">1957</option>
<option value="1956">1956</option>
<option value="1955">1955</option>
<option value="1954">1954</option>
<option value="1955">1955</option>
<option value="1956">1956</option>
<option value="1957">1957</option>
<option value="1958">1958</option>
<option value="1959">1959</option>
<option value="1960">1960</option>
<option value="1961">1961</option>
<option value="1962">1962</option>
<option value="1963">1963</option>
<option value="1964">1964</option>
<option value="1965">1965</option>
<option value="1966">1966</option>
<option value="1967">1967</option>
<option value="1968">1968</option>
<option value="1969">1969</option>
<option value="1970">1970</option>
<option value="1971">1971</option>
<option value="1972">1972</option>
<option value="1973">1973</option>
<option value="1974">1974</option>
<option value="1975">1975</option>
<option value="1976">1976</option>
<option value="1977">1977</option>
<option value="1978">1978</option>
<option value="1979">1979</option>
<option value="1980">1980</option>
<option value="1981">1981</option>
<option value="1982">1982</option>
<option value="1983">1983</option>
<option value="1984">1984</option>
<option value="1985">1985</option>
<option value="1986">1986</option>
<option value="1987">1987</option>
<option value="1988">1988</option>
<option value="1989">1989</option>
<option value="1990">1990</option>
<option value="1991">1991</option>
<option value="1992">1992</option>
<option value="1993">1993</option>
<option value="1994">1994</option>
<option value="1995">1995</option>
<option value="1996">1996</option>
<option value="1997">1997</option>
<option value="1998">1998</option>
<option value="1999">1999</option>
<option value="2000">2000</option>
<option value="2001">2001</option>
<option value="2002">2002</option>
<option value="2003">2003</option>
<option value="2004">2004</option>
<option value="2005">2005</option>
<option value="2006">2006</option>
<option value="2007">2007</option>
</select ></td></tr>
<tr>
<td><input type="hidden" name = "dob" /> </td>
<td nowrap="nowrap"><input type="submit" value="Submit" /></td>
</tr>
</table>
</form>
</td>
<td width="40"></td>
<td width="200" valign="top">
<div id="headlines">
<jsp:include flush="true" page="../templates/profile.jsp"/>
</div>
</td>
</tr>
</table>
</td>
<td> </td>
</tr>
</table></td>
</tr>
<tr>
<td><jsp:include flush="true" page="../templates/footer.jsp"/></td>
</tr>
</table>
</body>
</html>i think normally u will get data from databsae as objects.they are like java beans having getter and setter methods.so you create a collection of those objects like collect all the objects coming from database into an arraylist or....
suppose you want to populate the dropdown box with say "username" from database object s, your code will look like that
<html:select property="name">
<html:options collection="databaseList" property="username" />
</html:select>
"databaseList" is collection(say.. ArrayList) of objects you are getting from database.this dropdown will contain all the "usernames" you are getting from database. -
The drop down "FILE" in the tool bar use to have a choice to "CLOSE TAB". This is now missing so when I have multiple tabs open and I want to close the most recent, I cannot. I then get warned that I will be closing multiple numbers of tabs, but there is no other choice.
How do I get the "CLOSE TAB" back in the drop down "FILE" in the tool barStart Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]] -
How do I use a drop-down box to turn on a radio button?
I have a dynamic form with a drop-down box containing selections 1, 2, 3, and 4; later in the form I have a radio button group with two radio buttons labeled "pass" and "fail".
I would like to have drop-down selections 1 and 2 automatically select "fail" and 3 and 4 automatically select "pass" in the radio button group, with the option of the user changing this with a warning message.
Any help is greatly appreciated.
Thx
DrewHi,
you can use this JavaScript in the change event of your drop down list.
var sel = xfa.event.newText;
RadioButtonGroup.rawValue = (sel === "1" || sel === "2") ? 1 : 2; -
Wifi connection drops down. [SOLVED]
Hi, I'm having some issues with the wifi, in my notebook lenovo b5070. The main problem is that the connection drops down after 20, 30 minutes. I tried to change from NetworkManager to Wicd, but that didn't change anything. I also tried to create a profile and connect me through netctl, but again that didn't change anything. Other issues that I'm having are: Sometimes I can't even connect to the wifi, or if I can connect finally, and I try to request some website, the browser keeps idle and finally shows a "Server not found" message. Also the wifi signal seems pretty fine. I also tried change the tx, rts to the max with iwconfig, but this didn't change anything. I'm running out of ideas. Any idea?
Here is some info:
[astinx@compu ~]$ lsusb
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
Bus 001 Device 004: ID 0bda:b728 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 0c45:6514 Microdia
Bus 001 Device 002: ID 0458:012b KYE Systems Corp. (Mouse Systems)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[astinx@compu ~]$ iwconfig
wlp9s0 IEEE 802.11bgn ESSID:"albele"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1D:7E:6A:C4:67
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
Link Quality=52/70 Signal level=-58 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless extensions.
enp8s0 no wireless extensions.
[astinx@compu ~]$ ifconfig
enp8s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether f0:76:1c:0c:12:99 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 336 bytes 29472 (28.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 336 bytes 29472 (28.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp9s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.111 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::fa77:2850:54a4:4213 prefixlen 64 scopeid 0x20<link>
ether 38:b1:db:4f:f7:33 txqueuelen 1000 (Ethernet)
RX packets 192 bytes 52270 (51.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1297 bytes 138803 (135.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[astinx@compu ~]$ lspci -k
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
Subsystem: Lenovo Device 3978
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
Subsystem: Lenovo Device 3978
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
Subsystem: Lenovo Device 3978
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
Subsystem: Lenovo Device 3978
Kernel modules: i2c_i801
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Lenovo Device 3801
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
Subsystem: Lenovo Device 380e
Kernel driver in use: r8169
Kernel modules: r8169
09:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
Subsystem: Lenovo Device b736
Kernel driver in use: rtl8723be
Kernel modules: rtl8723be
[astinx@compu ~]$ lsusb
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.5-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009735ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000097360000-0x0000000097b5ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000097b60000-0x000000009c36efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c36f000-0x000000009c56efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009c56f000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem02: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem03: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem06: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3b000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3b000-0x0000000037926000) (873MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000037926000-0x0000000037c8b000) (3MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037c8b000-0x000000006ea96000) (878MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000006ea96000-0x0000000094b70000) (608MB)
[ 0.000000] efi: mem13: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000094b70000-0x0000000094b90000) (0MB)
[ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000094b90000-0x00000000968e3000) (29MB)
[ 0.000000] efi: mem15: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000968e3000-0x0000000097360000) (10MB)
[ 0.000000] efi: mem16: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000097360000-0x0000000097b60000) (8MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097b60000-0x0000000097d52000) (1MB)
[ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000097d52000-0x0000000097d6f000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097d6f000-0x000000009951f000) (23MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009951f000-0x0000000099f09000) (9MB)
[ 0.000000] efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f09000-0x0000000099f0e000) (0MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f0e000-0x0000000099f14000) (0MB)
[ 0.000000] efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f14000-0x0000000099f16000) (0MB)
[ 0.000000] efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f16000-0x0000000099f3f000) (0MB)
[ 0.000000] efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f3f000-0x0000000099f40000) (0MB)
[ 0.000000] efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f40000-0x000000009a08e000) (1MB)
[ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a08e000-0x000000009a094000) (0MB)
[ 0.000000] efi: mem28: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a094000-0x000000009a095000) (0MB)
[ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a095000-0x000000009a097000) (0MB)
[ 0.000000] efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a097000-0x000000009a09b000) (0MB)
[ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a09b000-0x000000009a09c000) (0MB)
[ 0.000000] efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a09c000-0x000000009a0d5000) (0MB)
[ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0d5000-0x000000009a0d7000) (0MB)
[ 0.000000] efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0d7000-0x000000009a0dc000) (0MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0dc000-0x000000009a0df000) (0MB)
[ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0df000-0x000000009a0e7000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0e7000-0x000000009a0ea000) (0MB)
[ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ea000-0x000000009a0eb000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0eb000-0x000000009a0ef000) (0MB)
[ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ef000-0x000000009a193000) (0MB)
[ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a193000-0x000000009a194000) (0MB)
[ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a194000-0x000000009bd6f000) (27MB)
[ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009bd6f000-0x000000009bf51000) (1MB)
[ 0.000000] efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009bf51000-0x000000009bf5b000) (0MB)
[ 0.000000] efi: mem45: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bf5b000-0x000000009c36f000) (4MB)
[ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c36f000-0x000000009c56f000) (2MB)
[ 0.000000] efi: mem47: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c56f000-0x000000009cabf000) (5MB)
[ 0.000000] efi: mem48: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009cabf000-0x000000009cebf000) (4MB)
[ 0.000000] efi: mem49: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009cebf000-0x000000009cfbf000) (1MB)
[ 0.000000] efi: mem50: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cfbf000-0x000000009cfff000) (0MB)
[ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
[ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000015f600000) (1526MB)
[ 0.000000] efi: mem53: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem54: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
[ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem56: [Reserved | | | | | | | | | ] range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem57: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem58: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem59: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem60: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem61: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem62: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffa00000-0x0000000100000000) (6MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20384/Lenovo B50-70, BIOS 9DCN21WW(V2.02) 06/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
[ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9735ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x971fffff] page 2M
[ 0.000000] [mem 0x97200000-0x9735ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x97b60000-0x9c36efff]
[ 0.000000] [mem 0x97b60000-0x97bfffff] page 4k
[ 0.000000] [mem 0x97c00000-0x9c1fffff] page 2M
[ 0.000000] [mem 0x9c200000-0x9c36efff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37926000-0x37c8afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFE7000 00DA18 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CFBA000 000040
[ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFE6000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFE5000 000700 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFE3000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFE2000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFE0000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFDF000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDA000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD9000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD5000 003537 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000009CFD4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x15f5f9000-0x15f5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x9735ffff]
[ 0.000000] node 0: [mem 0x97b60000-0x9c36efff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x15f5fffff]
[ 0.000000] On node 0 totalpages: 1028342
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9902 pages used for memmap
[ 0.000000] DMA32 zone: 633712 pages, LIFO batch:31
[ 0.000000] Normal zone: 6104 pages used for memmap
[ 0.000000] Normal zone: 390656 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x97360000-0x97b5ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c36f000-0x9c56efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c56f000-0x9cebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82880 r8192 d31808 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012248
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3909256K/4113368K available (5480K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 204112K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.377 MHz processor
[ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.28 BogoMIPS (lpj=7981256)
[ 0.000045] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20140926
[ 0.018809] ACPI: All ACPI Tables successfully acquired
[ 0.039185] Security Framework initialized
[ 0.039194] Yama: becoming mindful.
[ 0.039553] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040627] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.041121] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.041129] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.041378] Initializing cgroup subsys memory
[ 0.041384] Initializing cgroup subsys devices
[ 0.041386] Initializing cgroup subsys freezer
[ 0.041389] Initializing cgroup subsys net_cls
[ 0.041391] Initializing cgroup subsys blkio
[ 0.041417] CPU: Physical Processor ID: 0
[ 0.041419] CPU: Processor Core ID: 0
[ 0.041424] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.042651] mce: CPU supports 7 MCE banks
[ 0.042667] CPU0: Thermal monitoring enabled (TM1)
[ 0.042682] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.042812] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.043856] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.045955] ftrace: allocating 20931 entries in 82 pages
[ 0.058119] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091151] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.091159] TSC deadline timer enabled
[ 0.091185] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.091212] ... version: 3
[ 0.091214] ... bit width: 48
[ 0.091215] ... generic registers: 4
[ 0.091216] ... value mask: 0000ffffffffffff
[ 0.091217] ... max period: 0000ffffffffffff
[ 0.091218] ... fixed-purpose events: 3
[ 0.091220] ... event mask: 000000070000000f
[ 0.111308] x86: Booting SMP configuration:
[ 0.111311] .... node #0, CPUs: #1
[ 0.125959] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.132620] #2 #3
[ 0.168461] x86: Booted up 1 node, 4 CPUs
[ 0.168465] smpboot: Total of 4 processors activated (19162.14 BogoMIPS)
[ 0.173479] devtmpfs: initialized
[ 0.176167] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.177292] pinctrl core: initialized pinctrl subsystem
[ 0.177339] RTC time: 15:39:50, date: 02/08/15
[ 0.177475] NET: Registered protocol family 16
[ 0.189973] cpuidle: using governor ladder
[ 0.203321] cpuidle: using governor menu
[ 0.203363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.203364] ACPI: bus type PCI registered
[ 0.203366] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.203456] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.203459] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.203881] PCI: Using configuration type 1 for base access
[ 0.217092] ACPI: Added _OSI(Module Device)
[ 0.217094] ACPI: Added _OSI(Processor Device)
[ 0.217096] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.217098] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.222927] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.237854] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.250192] ACPI: Dynamic OEM Table Load:
[ 0.250204] ACPI: SSDT 0xFFFF880158F80C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.263714] ACPI: Dynamic OEM Table Load:
[ 0.263726] ACPI: SSDT 0xFFFF880158F59800 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.276877] ACPI: Dynamic OEM Table Load:
[ 0.276887] ACPI: SSDT 0xFFFF880158E92800 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.303769] ACPI: Interpreter enabled
[ 0.303781] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.303790] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.303817] ACPI: (supports S0 S3 S4 S5)
[ 0.303818] ACPI: Using IOAPIC for interrupt routing
[ 0.303851] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.416427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.416435] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.417003] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.417721] PCI host bridge to bus 0000:00
[ 0.417725] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.417728] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.417730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.417732] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.417734] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.417736] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.417738] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.417740] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.417742] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.417744] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.417746] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.417748] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.417750] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.417760] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.417946] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.417962] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb23fffff 64bit]
[ 0.417971] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.417977] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 0.418153] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.418164] pci 0000:00:03.0: reg 0x10: [mem 0xb2610000-0xb2613fff 64bit]
[ 0.418365] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.418385] pci 0000:00:14.0: reg 0x10: [mem 0xb2600000-0xb260ffff 64bit]
[ 0.418450] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.418565] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.418612] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.418635] pci 0000:00:16.0: reg 0x10: [mem 0xb2618000-0xb261801f 64bit]
[ 0.418711] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.418877] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.418893] pci 0000:00:1b.0: reg 0x10: [mem 0xb2614000-0xb2617fff 64bit]
[ 0.418968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.419082] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.419126] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.419198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.419353] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
[ 0.419428] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.419584] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.419659] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.419813] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.419888] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.420052] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.420074] pci 0000:00:1d.0: reg 0x10: [mem 0xb261c000-0xb261c3ff]
[ 0.420172] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.420309] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.420363] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.420631] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.420647] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
[ 0.420655] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
[ 0.420663] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
[ 0.420671] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
[ 0.420678] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 0.420686] pci 0000:00:1f.2: reg 0x24: [mem 0xb261b000-0xb261b7ff]
[ 0.420728] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.420878] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.420894] pci 0000:00:1f.3: reg 0x10: [mem 0xb2619000-0xb26190ff 64bit]
[ 0.420915] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
[ 0.421136] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.421234] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.421269] pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb1000fff]
[ 0.421424] pci 0000:02:00.0: supports D1 D2
[ 0.421427] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 0.421466] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.427022] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[ 0.427027] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.427030] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
[ 0.427036] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.427119] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[ 0.427139] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.427169] pci 0000:08:00.0: reg 0x18: [mem 0xb2504000-0xb2504fff 64bit]
[ 0.427188] pci 0000:08:00.0: reg 0x20: [mem 0xb2500000-0xb2503fff 64bit]
[ 0.427291] pci 0000:08:00.0: supports D1 D2
[ 0.427293] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.427358] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.433685] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.433689] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.433693] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
[ 0.433780] pci 0000:09:00.0: [10ec:b723] type 00 class 0x028000
[ 0.433803] pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.433837] pci 0000:09:00.0: reg 0x18: [mem 0xb2400000-0xb2403fff 64bit]
[ 0.433959] pci 0000:09:00.0: supports D1 D2
[ 0.433961] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.433994] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.443696] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.443699] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.443703] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
[ 0.443740] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.497639] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497748] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497800] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497902] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497953] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.498004] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.498197] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.498242] ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
[ 0.498365] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.498368] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.498372] vgaarb: loaded
[ 0.498373] vgaarb: bridge control possible 0000:00:02.0
[ 0.498519] PCI: Using ACPI for IRQ routing
[ 0.504636] PCI: pci_cache_line_size set to 64 bytes
[ 0.504686] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.504688] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.504689] e820: reserve RAM buffer [mem 0x97360000-0x97ffffff]
[ 0.504691] e820: reserve RAM buffer [mem 0x9c36f000-0x9fffffff]
[ 0.504693] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.504695] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[ 0.504822] NetLabel: Initializing
[ 0.504823] NetLabel: domain hash size = 128
[ 0.504824] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.504838] NetLabel: unlabeled traffic allowed by default
[ 0.504863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.504870] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.506900] Switched to clocksource hpet
[ 0.512939] pnp: PnP ACPI init
[ 0.513126] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.513129] system 00:00: [io 0x0500-0x053f] has been reserved
[ 0.513132] system 00:00: [io 0xffff] has been reserved
[ 0.513134] system 00:00: [io 0xffff] has been reserved
[ 0.513136] system 00:00: [io 0xffff] has been reserved
[ 0.513139] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.513141] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.513145] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.513202] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.513256] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.513259] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.513288] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.513351] pnp 00:04: Plug and Play ACPI device, IDs SYN2b39 SYN0700 SYN0002 PNP0f13 (active)
[ 0.563797] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.563800] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.563802] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.563804] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.563807] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.563809] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.563811] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.563813] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.563816] system 00:05: [mem 0xff001000-0xff0010ff] has been reserved
[ 0.563818] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.563821] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.563823] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.563825] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.563829] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.564138] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.564571] pnp: PnP ACPI: found 7 devices
[ 0.571172] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.571185] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[ 0.571188] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.571193] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
[ 0.571197] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.571203] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.571206] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.571211] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
[ 0.571218] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.571221] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.571226] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
[ 0.571235] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.571237] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.571239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.571241] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.571243] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.571245] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.571247] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.571249] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.571251] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.571253] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.571255] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.571257] pci_bus 0000:00: resource 15 [mem 0x9fa00000-0xfeafffff]
[ 0.571260] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.571261] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb1ffffff]
[ 0.571264] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.571266] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.571268] pci_bus 0000:08: resource 1 [mem 0xb2500000-0xb25fffff]
[ 0.571270] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 0.571272] pci_bus 0000:09: resource 1 [mem 0xb2400000-0xb24fffff]
[ 0.571305] NET: Registered protocol family 2
[ 0.571528] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.571618] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.571715] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.571736] TCP: reno registered
[ 0.571744] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.571763] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.571824] NET: Registered protocol family 1
[ 0.571842] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.583761] PCI: CLS 64 bytes, default 64
[ 0.583812] Unpacking initramfs...
[ 0.665763] Freeing initrd memory: 3476K (ffff880037926000 - ffff880037c8b000)
[ 0.665775] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.665778] software IO TLB [mem 0x90b70000-0x94b70000] (64MB) mapped at [ffff880090b70000-ffff880094b6ffff]
[ 0.665818] Simple Boot Flag at 0x44 set to 0x1
[ 0.666015] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.666080] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[ 0.666087] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 0.666095] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 0.666104] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[ 0.666156] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.666187] Scanning for low memory corruption every 60 seconds
[ 0.666541] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.666577] Initialise system trusted keyring
[ 0.666959] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.668721] zpool: loaded
[ 0.668726] zbud: loaded
[ 0.668990] VFS: Disk quotas dquot_6.5.2
[ 0.669031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.669172] msgmni has been set to 7751
[ 0.669234] Key type big_key registered
[ 0.669453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.669499] io scheduler noop registered
[ 0.669502] io scheduler deadline registered
[ 0.669540] io scheduler cfq registered (default)
[ 0.669759] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.669935] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.670110] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.670269] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.670374] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.670379] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.670396] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.670398] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.670402] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.670419] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.670421] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.670424] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.670440] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.670442] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 0.670446] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.670466] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.670499] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.670533] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.670539] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.670583] efifb: probing for efifb
[ 0.670605] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010800000, using 4160k, total 4160k
[ 0.670606] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.670607] efifb: scrolling: redraw
[ 0.670609] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.674675] Console: switching to colour frame buffer device 170x48
[ 0.678177] fb0: EFI VGA frame buffer device
[ 0.678188] intel_idle: MWAIT substates: 0x11142120
[ 0.678190] intel_idle: v0.4 model 0x45
[ 0.678191] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.678506] GHES: HEST is not enabled!
[ 0.678574] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.679056] Linux agpgart interface v0.103
[ 0.679108] rtc_cmos 00:01: RTC can wake from S4
[ 0.679243] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.679273] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.679287] Intel P-state driver initializing.
[ 0.679431] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.679696] TCP: cubic registered
[ 0.679919] NET: Registered protocol family 10
[ 0.680456] NET: Registered protocol family 17
[ 0.681245] Loading compiled-in X.509 certificates
[ 0.681277] registered taskstats version 1
[ 0.682279] Magic number: 3:299:689
[ 0.682435] rtc_cmos 00:01: setting system clock to 2015-02-08 15:39:50 UTC (1423409990)
[ 0.682615] PM: Checking hibernation image partition UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae
[ 0.682621] PM: Hibernation image not present or could not be loaded.
[ 0.684595] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 0.684599] Write protecting the kernel read-only data: 8192k
[ 0.688817] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 0.690614] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 0.702916] random: systemd-tmpfile urandom read with 3 bits of entropy available
[ 0.718779] sdhci: Secure Digital Host Controller Interface driver
[ 0.718781] sdhci: Copyright(c) Pierre Ossman
[ 0.720168] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 0.726783] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.726825] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.727977] ACPI: bus type USB registered
[ 0.727998] usbcore: registered new interface driver usbfs
[ 0.728005] usbcore: registered new interface driver hub
[ 0.728031] usbcore: registered new device driver usb
[ 0.728826] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.728833] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.728904] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.728919] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 0.729105] hub 1-0:1.0: USB hub found
[ 0.729116] hub 1-0:1.0: 9 ports detected
[ 0.729254] rtsx_pci 0000:02:00.0: irq 45 for MSI/MSI-X
[ 0.729269] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
[ 0.729962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.730134] ehci-pci: EHCI PCI platform driver
[ 0.731658] SCSI subsystem initialized
[ 0.732538] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.732545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.732737] hub 2-0:1.0: USB hub found
[ 0.732750] hub 2-0:1.0: 4 ports detected
[ 0.733058] libata version 3.00 loaded.
[ 0.733952] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.733959] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.733972] ehci-pci 0000:00:1d.0: debug port 2
[ 0.737882] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.737904] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb261c000
[ 0.747112] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.747298] hub 3-0:1.0: USB hub found
[ 0.747312] hub 3-0:1.0: 2 ports detected
[ 0.747491] ahci 0000:00:1f.2: version 3.0
[ 0.747673] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.747695] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.760531] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.760537] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.761117] scsi host0: ahci
[ 0.761280] scsi host1: ahci
[ 0.761400] scsi host2: ahci
[ 0.761527] scsi host3: ahci
[ 0.761587] ata1: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b100 irq 46
[ 0.761590] ata2: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b180 irq 46
[ 0.761591] ata3: DUMMY
[ 0.761592] ata4: DUMMY
[ 0.763988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.054094] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.080772] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.090784] usb 1-3: new low-speed USB device number 2 using xhci_hcd
[ 1.108052] ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133
[ 1.108057] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.147102] ata1.00: configured for UDMA/133
[ 1.147357] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5
[ 1.178260] hub 3-1:1.0: USB hub found
[ 1.178324] hub 3-1:1.0: 8 ports detected
[ 1.267676] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.269353] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.271432] usbcore: registered new interface driver usbhid
[ 1.271435] usbhid: USB HID core driver
[ 1.427737] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 1.467751] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.472648] ata2.00: ATAPI: PLDS DVD-RW DA8A5SH, RL61, max UDMA/100
[ 1.473654] ata2.00: configured for UDMA/100
[ 1.487478] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8A5SH RL61 PQ: 0 ANSI: 5
[ 1.506690] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.506695] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.506762] sd 0:0:0:0: [sda] Write Protect is off
[ 1.506765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.506805] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.526586] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.526589] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.526753] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.576727] sda: sda1 sda2 sda3 sda4
[ 1.577520] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.668501] tsc: Refined TSC clocksource calibration: 2394.458 MHz
[ 1.834689] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 1.866481] PM: Starting manual resume from disk
[ 1.866486] PM: Hibernation image partition 8:2 present
[ 1.866488] PM: Looking for hibernation image.
[ 1.866742] PM: Image not found (code -22)
[ 1.866745] PM: Hibernation image not present or could not be loaded.
[ 2.008615] usb 1-7: No LPM exit latency info found, disabling LPM.
[ 2.168326] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[ 2.200127] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.668929] Switched to clocksource tsc
[ 2.998993] random: nonblocking pool is initialized
[ 5.035645] EXT4-fs (sda4): re-mounted. Opts: discard
[ 7.983617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.001442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[ 8.001451] ACPI: Power Button [PWRB]
[ 8.001539] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
[ 8.001584] ACPI: Lid Switch [LID0]
[ 8.001677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.001681] ACPI: Power Button [PWRF]
[ 8.067218] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 8.169733] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.169739] ACPI: Thermal Zone [TZ00] (29 C)
[ 8.239918] ACPI: Battery Slot [BAT1] (battery present)
[ 8.270385] ACPI: AC Adapter [ACAD] (on-line)
[ 8.341145] [drm] Initialized drm 1.1.0 20060810
[ 8.435780] ACPI Warning: SystemIO range 0x0000000000006040-0x000000000000605f conflicts with OpRegion 0x0000000000006040-0x000000000000604f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
[ 8.435788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.524972] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[ 8.571862] [drm] Memory usable by graphics device = 2048M
[ 8.571868] checking generic (a0000000 410000) vs hw (a0000000 10000000)
[ 8.571870] fb: switching to inteldrmfb from EFI VGA
[ 8.571892] Console: switching to colour dummy device 80x25
[ 8.571969] [drm] Replacing VGA console driver
[ 8.590169] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 8.590182] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.590184] [drm] Driver supports precise vblank timestamp query.
[ 8.590211] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.648474] fbcon: inteldrmfb (fb0) is primary device
[ 8.665898] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.665971] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 8.665996] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 8.789354] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0458:012B.0001/input/input7
[ 8.789415] hid-generic 0003:0458:012B.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
[ 8.812071] media: Linux media interface: v0.10
[ 8.833777] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 8.840567] Linux video capture interface: v2.00
[ 8.897231] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6514)
[ 8.929823] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input10
[ 8.929908] usbcore: registered new interface driver uvcvideo
[ 8.929909] USB Video Class driver (1.1.1)
[ 9.036891] cfg80211: Calling CRDA to update world regulatory domain
[ 9.056738] Bluetooth: Core ver 2.19
[ 9.056751] NET: Registered protocol family 31
[ 9.056751] Bluetooth: HCI device and connection manager initialized
[ 9.056757] Bluetooth: HCI socket layer initialized
[ 9.056758] Bluetooth: L2CAP socket layer initialized
[ 9.056766] Bluetooth: SCO socket layer initialized
[ 9.348730] usbcore: registered new interface driver btusb
[ 9.452303] iTCO_vendor_support: vendor-support=0
[ 9.452955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.452990] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 9.453081] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.494632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.494637] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.501333] r8169 0000:08:00.0: irq 49 for MSI/MSI-X
[ 9.501800] r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90010788000, f0:76:1c:0c:12:99, XID 10900800 IRQ 49
[ 9.501802] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.582307] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 9.640127] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.640351] rtlwifi: rtlwifi: wireless switch is on
[ 9.653001] mousedev: PS/2 mouse device common for all mice
[ 9.667517] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
[ 9.686347] r8169 0000:08:00.0 enp8s0: renamed from eth0
[ 9.708662] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 9.727739] Console: switching to colour frame buffer device 170x48
[ 9.730327] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.730328] i915 0000:00:02.0: registered panic notifier
[ 9.737976] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 9.743445] AVX2 version of gcm_enc/dec engaged.
[ 9.743448] AES CTR mode by8 optimization enabled
[ 9.745577] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
[ 10.040841] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.040848] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.040851] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.040852] sound hdaudioC1D0: mono: mono_out=0x0
[ 10.040854] sound hdaudioC1D0: inputs:
[ 10.040857] sound hdaudioC1D0: Mic=0x19
[ 10.040859] sound hdaudioC1D0: Internal Mic=0x12
[ 10.046345] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 10.046446] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 10.046909] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 10.047361] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
[ 10.047575] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 10.047649] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 10.097496] rtl8723be 0000:09:00.0 wlp9s0: renamed from wlan0
[ 10.655545] cfg80211: World regulatory domain updated:
[ 10.655549] cfg80211: DFS Master region: unset
[ 10.655550] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.655553] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655555] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655559] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655561] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.655563] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.655564] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655566] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.732705] intel_rapl: Found RAPL domain package
[ 10.732711] intel_rapl: Found RAPL domain core
[ 10.732714] intel_rapl: Found RAPL domain uncore
[ 10.732717] intel_rapl: Found RAPL domain dram
[ 10.844302] Adding 4009760k swap on /dev/sda2. Priority:-1 extents:1 across:4009760k FS
[ 13.353211] systemd-journald[146]: Received request to flush runtime journal from PID 1
[ 18.647280] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.647284] Bluetooth: BNEP filters: protocol multicast
[ 18.647293] Bluetooth: BNEP socket layer initialized
[ 21.632791] r8169 0000:08:00.0 enp8s0: link down
[ 83.137005] wlp9s0: authenticate with 00:1d:7e:6a:c4:67
[ 83.729985] wlp9s0: send auth to 00:1d:7e:6a:c4:67 (try 1/3)
[ 83.731584] wlp9s0: authenticated
[ 83.731753] rtl8723be 0000:09:00.0 wlp9s0: disabling HT as WMM/QoS is not supported by the AP
[ 83.731757] rtl8723be 0000:09:00.0 wlp9s0: disabling VHT as WMM/QoS is not supported by the AP
[ 83.734174] wlp9s0: associate with 00:1d:7e:6a:c4:67 (try 1/3)
[ 83.737516] wlp9s0: RX AssocResp from 00:1d:7e:6a:c4:67 (capab=0x411 status=0 aid=3)
[ 83.737660] wlp9s0: associated
[astinx@compu ~]$ systemctl status
● compu
State: running
Jobs: 0 queued
Failed: 0 units
Since: dom 2015-02-08 13:47:04 ART; 24min ago
CGroup: /
├─1 /sbin/init
├─system.slice
│ ├─dbus.service
│ │ └─301 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
│ ├─org.cups.cupsd.service
│ │ └─299 /usr/bin/cupsd -l
│ ├─ModemManager.service
│ │ └─303 /usr/bin/ModemManager
│ ├─wpa_supplicant.service
│ │ └─346 /usr/bin/wpa_supplicant -u
│ ├─lightdm.service
│ │ ├─314 /usr/bin/lightdm
│ │ └─329 /usr/bin/Xorg.bin :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
│ ├─accounts-daemon.service
│ │ └─331 /usr/lib/accountsserSo long I tried as Gusar said to loading the rtl8723b module with those params:
sudo modprobe rtl8723be fwlps=0
sudo modprobe rtl8723be ips=0
So far by now, the connection hasn't dropped (one hour since I made the change)
But is quite strange that when I do
[astinx@compu ~]$ more /sys/module/rtl8723be/parameters/ips
Y
I mean, the parameters changed or not? I also tried with setting with N instead of 0.
EDIT:
The drop downs come back shortly after. I find quite strange that I cannot manage the power from iwconfig
[astinx@compu ~]$ sudo iwconfig wlp9s0 power off
[sudo] password for astinx:
Error for wireless request "Set Power Management" (8B2C) :
SET failed on device wlp9s0 ; Operation not supported.
Last edited by astinx (2015-02-08 21:46:47) -
When my delegates are filling in a event form i have put together, a large number of them forget to change either the month or year on the date field. Is there a way to have a date field that has drop down boxes for day, month and year so they have to choose rather than a date been already on the screen??
ThanksHi Christopher,
The WEEKDAY function allows specifying either Sunday or Monday as the first day of the week:
WEEKDAY
The WEEKDAY function returns a number that is the day of the week for a given date. WEEKDAY(date, first-day)
 date: The date the function should use. date is a date/time value. The time portion is ignored by this function.
 first-day: An optional value that specifies how days are numbered.
Sunday is 1 (1 or omitted): Sunday is the first day (day 1) of the week and Saturday is day 7.
Monday is 1 (2): Monday is the first day (day 1) of the week and Sunday is day 7. Monday is 0 (3): Monday is the first day (day 0) of the week and Sunday is day 6.
But I think you are referring to the first day of the 'workweek', for which I do not see a means of defining a custom value.
Since you want to 'insert categories', though, you could easily define your own, using WEEKDAY(date) or WEEKDAY(date,1), plus an IF statement to return the category label appropriate to the day. Here's one for a Sunday to Thursday work week. Dates are in column A, the formula is in whichever column you want as the Category column. For the example, I've placed it in column B.
B2, and filled down: =IF(WEEKDAY(A)<6,"Work","Off")
The top table shows the weekday numbers returned for each day of the week for each of the three permitted values for the optional second argument. The bottom table shows the results from the formula above, used to define a category label for each date:
A10 was left blank intentionally, to determine if the lack of data resulted in an error. The Warning message, flagged by the blue 'warning' triangle, is "The formula uses a number in place of a date." The 'date' assigned to this numerical value of zero was a Friday, but I'm not certain when. Probably best to avoid extra rows with no date shown.
Regards,
Barry -
Drop-down menu in Dreamweaver CS5.5 not displaying
Thanks for anyone's help. I'm a first time user of the forum so please excuse any protocol errors.
I can't get my drop-down menu to display on my web page (http://www.cglcontracting.com/) on a Windows platform using Dreamweaver CS5.5.
Thanks very much for any advice/help.Hi again -
My previous suggestion did not seem to make any difference, the CSS still did not validate.
I seems to be choking on your Browser Hack section.
http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.cglcontracting.com%2FSpr yAssets%2FSpryMenuBarHorizontal.css&profile=css3&usermedium=all&warning=1&vextwarning=&lan g=en
I re-wrote the bottom Browser Hack section and it now validates.
I'll paste the whole CSS file here, Save it as "SpryMenuBarHorizontal.css" and give it a try.
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 90%;
cursor: default;
width: auto;
color: rgb(153,153,153);
text-transform: uppercase;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
text-align: center;
background-color: rgb(255,255,255);
vertical-align: middle;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
color: rgb(153,153,153);
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
width: 8em;
float: left;
color: rgb(0,255,0);
overflow: hidden;
visibility: inherit;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 8.2em;
color: rgb(204,204,204);
top: 0px;
overflow: auto;
visibility: inherit;
margin-top: -5%;
margin-left: 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
color: rgb(204,204,204);
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-variant: small-caps;
text-transform: uppercase;
background-color: rgb(255,0,0);
left: auto;
width: auto;
z-index: auto;
visibility: inherit;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
text-align: left;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
background-color: rgb(204,204,204);
margin-top: -5%;
margin-right: 0;
margin-bottom: 0;
margin-left: 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: 100px;
background-color: rgb(204,204,204);
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: 0px none #CCC;
margin-top: 0%;
margin-right: 0%;
margin-bottom: 0%;
margin-left: 0%;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
background-color: #F00;
color: #003;
text-decoration: none;
text-align: center;
font-family: Arial, Helvetica, sans-serif;
padding-top: 1.2ex;
font-weight: bold;
vertical-align: middle;
padding-bottom: 0.53em;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #000;
color: rgb(255,255,255);
text-align: center;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #900;
color: #066;
text-align: center;
vertical-align: middle;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-image: url(SpryMenuBarDown.gif);
background-repeat: no-repeat;
background-position: 98% 50%;
background-color: rgb(255,0,0);
color: rgb(0,0,51);
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 98% 50%;
background-color: rgb(204,204,204);
visibility: inherit;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 98% 50%;
background-color: rgb(153,0,0);
visibility: visible;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 98% 50%;
background-color: rgb(153,153,153);
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarVertical iframe
position: absolute;
z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarVertical li.MenuBarItemIE
display: inline;
f\loat: left;
background: #FFF; -
Spry Drop Down Duplicated in Empty Space
This is regarding this site: staging.istservice.com .
My spry menu is behaving very strangely. In Firefox there is
a duplicate ghost menu (just the subs) that appears on the far left
of the screen (it's a very long screen shot so I will give you the
link instead of posting: staging.istservice.com/GhostMenu.jpg
You can only see the full menu if you have a very wide
monitor (I had to spread it across two to get the screen shot). But
if you have even a somewhat wide monitor you can see the very left
side of the duplicate menu. When you hover over a drop down in the
page menu, the correlating ghost menu disappears. If you keep your
mouse hovered over it, they blink on and off very quickly.
For even further oddness, in Explorer this only show up when
I preview the local file. Once I post it (and thus avoid the
ActiveX warning) it disappears.
I can't seem to connect the dots here. I know firefox has
issues with spry but I was able to fix the spry-over-flash issue
with some janky workarounds. I’m still not quite sure why
they worked. However, the above bug pre-dated the workaround so I
doubt they caused it.
Any thoughts?> You can only see the full menu if you have a very wide
monitor
In FF3 (not sure about earlier) you can use Ctrl+ scroll on
mouse to zoom to
see your problem without a wide monitor.
Check out your duplicate id's which may help when you fix
them
(mainContent), and the omitted end tag for <li>
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fstaging.istservice.com%2F
Jo
"tflavin" <[email protected]> wrote in
message
news:[email protected]...
> This is regarding this site: staging.istservice.com .
>
> My spry menu is behaving very strangely. In Firefox
there is a duplicate
> ghost
> menu (just the subs) that appears on the far left of the
screen (it's a
> very
> long screen shot so I will give you the link instead of
posting:
> staging.istservice.com/GhostMenu.jpg
>
> You can only see the full menu if you have a very wide
monitor (I had to
> spread it across two to get the screen shot). But if you
have even a
> somewhat
> wide monitor you can see the very left side of the
duplicate menu. When
> you
> hover over a drop down in the page menu, the correlating
ghost menu
> disappears.
> If you keep your mouse hovered over it, they blink on
and off very
> quickly.
>
> For even further oddness, in Explorer this only show up
when I preview the
> local file. Once I post it (and thus avoid the ActiveX
warning) it
> disappears.
>
> I can't seem to connect the dots here. I know firefox
has issues with spry
> but
> I was able to fix the spry-over-flash issue with some
janky workarounds.
> I?m
> still not quite sure why they worked. However, the above
bug pre-dated the
> workaround so I doubt they caused it.
>
> Any thoughts?
>
>
> /* The outermost container of the Menu Bar, an auto
width box with no
> margin
> or padding */
> ul.MenuBarHorizontal
> {
> margin: 0;
> padding: 0;
> list-style-type: none;
> font-size: 100%;
> cursor: default;
> width: auto;
> }
> /* Set the active Menu Bar with this class, currently
setting z-index to
> accomodate IE rendering bug:
>
http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html
> ul.MenuBarActive
> {
> z-index: 1000;
> }
> /* Menu item containers, position children relative to
this container and
> are
> a fixed width */
> ul.MenuBarHorizontal li
> {
> margin: 0;
> padding: 0;
> list-style-type: none;
> font-size: 100%;
> position: relative;
> text-align: left;
> cursor: pointer;
> width: 225px;
> float: left;
> white-space: nowrap;
> }
> /* Submenus should appear below their parent (top: 0)
with a higher
> z-index,
> but they are initially off the left side of the screen
(-1000em) */
> ul.MenuBarHorizontal ul
> {
> margin: 0;
> padding: 0;
> list-style-type: none;
> font-size: 100%;
> z-index: 1020;
> cursor: default;
> width: 8.2em;
> position: absolute;
> left: -1000px;
> }
> /* Submenu that is showing with class designation
MenuBarSubmenuVisible,
> we
> set left to auto so it comes onto the screen below its
parent menu item */
> ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
> {
> left: auto;
> }
> /* Menu item containers are same fixed width as parent
> ul.MenuBarHorizontal ul li
> {
> width: 8.2em;
> }
> /* Submenus should appear slightly overlapping to the
right (95%) and up
> (-5%)
> */
> ul.MenuBarHorizontal ul ul
> {
> position: absolute;
> margin: -5% 0 0 95%;
> }
> /* Submenu that is showing with class designation
MenuBarSubmenuVisible,
> we
> set left to 0 so it comes onto the screen */
> ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
ul.MenuBarSubmenuVisible
> {
> left: auto;
> top: 0;
> }
>
> /**************************************************
> *****************************
>
> DESIGN INFORMATION: describes color scheme, borders,
fonts
>
> **************************************************
> *****************************/
>
> /* Submenu containers have borders on all sides */
> ul.MenuBarHorizontal ul
> {
> border: 1px solid #CCC;
> }
> /* Menu items are a light gray block with padding and no
text decoration
> */
> ul.MenuBarHorizontal a
> {
> display: block;
> cursor: pointer;
> background-color: #666666;
> padding: 0.5em 0.75em;
> color: #FFFFFF;
> text-decoration: none;
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 10px;
> }
> /* Menu items that have mouse over or focus have a blue
background and
> white
> text */
> ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal
a:focus
> {
> background-color: #999999;
> color: #FFF;
> }
> /* Menu items that are open with submenus are set to
MenuBarItemHover with
> a
> blue background and white text */
> ul.MenuBarHorizontal a.MenuBarItemHover,
ul.MenuBarHorizontal
> a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal
a.MenuBarSubmenuVisible
> {
> background-color: #999999;
> color: #FFF;
> }
>
> /**************************************************
> *****************************
>
> SUBMENU INDICATION: styles if there is a submenu under a
given menu item
>
> **************************************************
> *****************************/
>
> /* Menu items that have a submenu have the class
designation
> MenuBarItemSubmenu and are set to use a background image
positioned on the
> far
> left (95%) and centered vertically (50%) */
> ul.MenuBarHorizontal a.MenuBarItemSubmenu
> {
> background-image: url(../Images/spryspacerTemp.jpg);
> background-repeat: no-repeat;
> background-position: 100% 50%;
> }
> /* Menu items that have a submenu have the class
designation
> MenuBarItemSubmenu and are set to use a background image
positioned on the
> far
> left (95%) and centered vertically (50%) */
> ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
> {
> background-image: url(SpryMenuBarRight.gif);
> background-repeat: no-repeat;
> background-position: 95% 50%;
> }
> /* Menu items that are open with submenus have the class
designation
> MenuBarItemSubmenuHover and are set to use a "hover"
background image
> positioned on the far left (95%) and centered vertically
(50%) */
> ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
> {
> background-image: url(SpryMenuBarDownHover.gif);
> background-repeat: no-repeat;
> background-position: 95% 50%;
> background-color: #1C5D9B;
> }
> /* Menu items that are open with submenus have the class
designation
> MenuBarItemSubmenuHover and are set to use a "hover"
background image
> positioned on the far left (95%) and centered vertically
(50%) */
> ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
> {
> background-image: url(SpryMenuBarRightHover.gif);
> background-repeat: no-repeat;
> background-position: 95% 50%;
> }
>
> /**************************************************
> *****************************
>
> BROWSER HACKS: the hacks below should not be changed
unless you are an
> expert
>
> **************************************************
> *****************************/
>
> /* HACK FOR IE: to make sure the sub menus show above
form controls, we
> underlay each submenu with an iframe */
> ul.MenuBarHorizontal iframe
> {
> position: absolute;
> z-index: 1010;
> }
> /* HACK FOR IE: to stabilize appearance of menu items;
the slash in float
> is
> to keep IE 5.0 from parsing */
> @media screen, projection
> {
> ul.MenuBarHorizontal li.MenuBarItemIE
> {
> display: inline;
> f\loat: left;
> background: #FFF;
> }
> }
> -
Adobe Flash player jiggles the screen on drop down boxes, videos, and animation
Any time I visit a site with drop down boxes, videos, or animation that require Flash, that portion of the screen will do a fast jiggle up and down - like it is refreshing too fast. Adobe Flash works fine in IE. Some sites the jiggle is slower than others. This is only happening with Firefox. I have searched the net for possible solutions and cannot find others with this problem. The jiggling is almost like portions of the screen have gone spastic.
I am running Windows 7 64 bit on a Toshiba Laptop . I am running Firefox 9 and Flash 11.1.102.55 64 bit plug in. I have uninstalled and reinstalled both programs and have not been able to fix it. My video driver is up to date.Tylerdowner, as a moderator, one would think that, prior to adjusting comments/solutions, especially when not having a Mac, you would do more research (bet you know someone with a Mac, to duplicate problem), or pass responding on to a moderator who does have a Mac (I am amazed that you are even a moderator on Mac problems/situations, if you only have access to a PC). Had the solutions above worked, I would not have needed to figure out another solution (we all know the newest release of anything is the most secure). Finally I am open to any fixes (tested) that you can provide, that improve upon mine. As a moderator, maybe you have pull with the Foxtab and/or Adobe people to get them to work out compatibility, and lastly, maybe add a warning at the Foxtab add-ons page, after verifying the problem yourself, with an associate's/friend's Mac.
-
Font not found when opening file and not able to resolve, but is listed in the fonts drop down list?
Hi, i just downloaded some files from a friend and he sent me a link to download the fonts. I did so and 98% of the fonts work, but there are two fonts i am struggling with.
When i open the file i get the font missing warning and it asks me to resolve the fonts. I cannot find the appropriate font in the drop down list so i click 'don't resolve' and start to edit the file. i then come across some text that has missing fonts and i am able to highlight the text and change the text to the appropriate font using the type tool and the font I am looking for is in the drop down list.
The fonts that aren't working are:
Franchise Bold and BebasNeue
The problem is there are multiple separate incidents where these fonts occur, and going through changing each one manually would take a lot of time.
Is there something i can do to fix them all at once?
Thanks,
HarryI do not see either font in the list you show. I see Bebas Neue xxx but no Bebas Neue without any extra style. Try Bebas Neue at Download Bebas Neue Font - Thousands of fonts to download for free
-
I cannot open pages on my MacBookPro. I get a message to update it. In my software update in the apple menu drop down, it shows no updates at this time. I have iWork '09.
You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 100 features from Pages 5 and added many bugs, including files that refuse rto open:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Maybe you are looking for
-
Just wondering if anyone is using the magic trackpad with Logic. I was thinking of getting it; I love the multitouch gestures on my laptop. But I'm wondering what people's experience has been with the magic trackpad and Logic specifically. Any feedba
-
Use of JCo in JBoss Application Server
Hi All does anyone know if the SAP JCo drivers are supported in other Application Servers (e.g. JBoss 6) ? Thanks a lot in advance
-
Hello All. I have a problem when post a payroll documents and a vendor document split is generated. The problem is that the technical account isn't cleared between both documents. In the first document (document with balance accounts) the technical
-
I cannot increase the volume of Maps or Mapquest on my Iphone 4S loug enough to hear it. Are there better navigation apps or does anyone know how to make the volume louder?
-
Hi, What is the function of 'assign version' from the list of 'edit' in MD12 - change planned order. Is there a way to change the BOM revision level assigned by MRP run? Currently MRP assign the most recent revision level to a planned order, and I wo