Drop downs for report options
I don't know if this is available for Crystal but one of the managers was asking if the report could be setup as for example Quickbooks, where you apparently have drop down menus that allow you to filter the data. for example this month, this week, etc. I know we can program for such but is it available for the user.
I am speaking to the actual report not to setup a menu with such options.
I beleive this could be done in Xcelsius but they were asking per CR.
Hi Philky,
You can use parameter feature available with Crystal Reports.
You can refer 'Crystal Reports Help' for more details about parameters.
Regards,
Ankeet
Similar Messages
-
In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..
Total life saver. Thank you
-
Hi,
Im trying to create a report with a table and chart views.
Can i have the report as below:
1.Need to have a drop down for only View ie) Table,Chart
2.Need to have another drop down with values ie) Revenue and margin
If i click on Table and then revenue it should show revenue table values
If i click on Chart and then revenue it should show chart with revenue values
Same with margin.
Can this be done.
Regards,
KKHi,
1) Create two report (chart & table based) then each view add one dummy column and make this to be prompted as (variable prompt)
2) Create Dashboard prompt --> create two variable prompt ( one for report selection and another one for measure selection (here u have to add measure column as value like Revenue,Margin...N etc)
then test it
For report as column selector via variable prompt option sample screen short
http://atlantabi.blogspot.com/2012/01/obiee-11g-using-dashboard-prompt-as.html
For report as prompt selection via variable prompt option sample screen short
http://orabi1001.blogspot.com/2012/05/obiee-report-prompt-link-obiee-11g.html
Thanks
Deva -
Need a drop down for a selection screen
HI all,
I need a drop down for a selection screen.
say for eg: Field is MARA-MTART (Material Type). The selection is optional and the dropdown should be using check table: T134
How to get a dropdown? I think a function module is used , but I dont remember the name.
Kindly reply.
Thanks in advance.
Points will be rewardedHi,
chk the below code...
TYPE-POOLS: vrm.
PARAMETER: pr_spart TYPE spart AS LISTBOX VISIBLE LENGTH 7.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR pr_spart.
INITIALIZATION.
*----Code for Drop down list....
DATA: lit_spart_list TYPE vrm_values, "Table for list of Divisions
lwa_spart_list TYPE vrm_value,
lw_name TYPE vrm_id. "Name of parameter with list-box.
*---Assign selected values to table that would be passed to FM VRM_SET_VALUES
CLEAR : lwa_spart_list,
lw_name.
*---Pass required values for list-box display.
lwa_spart_list-key = 'H'.
lwa_spart_list-text = 'HL'.
APPEND lwa_spart_list TO lit_spart_list.
lwa_spart_list-key = 'S'.
lwa_spart_list-text = 'SL'.
APPEND lwa_spart_list TO lit_spart_list.
lwa_spart_list-key = 'P'.
lwa_spart_list-text = 'PP'.
APPEND lwa_spart_list TO lit_spart_list.
lwa_spart_list-key = 'F'.
lwa_spart_list-text = 'FR'.
APPEND lwa_spart_list TO lit_spart_list.
*Name of parameter to which list is to be assigned
lw_name = 'PR_SPART'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = lw_name
values = lit_spart_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Reagrds,
nagaraj -
How can I enable the automated drop down for the subject line on the email page
How can I enable the automated drop down for the subject line on the email page as I send more than 300 emails everyday with the same subject line. Before it use to happen in my gmail account but now its not. Please help me as its increasing my work time because I have to type the subject line again and again on each email I send. Please help me guys.
This is usually caused by one or more bookmarks having a long title.
You can check that folder in the Library and shorten long names.
* Bookmarks > Show Al Bookmarks
*Bug 626066 - History, Bookmarks menus too wide because of pages with long titles on 64bits
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i> -
Abt Drop Down For ALV Data cells
Hi,
I m unable to create drop down for each cell of ALV table.
Reply me as soon as possible.
Thks.You need to create an object of type CL_SALV_WD_UIE_DROPDOWN_BY_KEY, which is the UI element for dropdown by key, and set that to be your individual cell editor.
For whichever column you want a dropdown box, use the method set_cell_editor to make the editor as a dropdown box. Hope this helps.
Regards
Nithya -
User command in drop down in select options
Hi. I am able to build a drop down in select options via the method add_parameter_field, and setting option I_AS_DROPDOWN as true.
Now I want to trigger a user command when any value in the drop down is selected. Is it possible? I cannot find any method / means to do it.
Thanks in adv.Dear Aishi,
Try this code on your Dropdownindex object. Events->onSelecet(ONACTIONSELECT).
method ONACTIONSELECT .
wd_context->set_attribute( name = 'DROPDOWN_BY_IDX_1_INFO' value = index ).
if index = 1.
wd_this->onactionon_action1( EXPORTING wdevent = wdevent ). " action1 action
endif. index = 2.
wd_this->onactionon_action2( EXPORTING wdevent = wdevent ). " action2 action
endif.
endmethod.
Bulent -
Drop down for a field in a table
hi friends,
need a help from u, how to maintain the drop down for a field in a table..
advance thanks..Hi,
You can use the function module F4IF_INT_TABLE_VALUE_REQUEST
TABLES: T005T.
DATA: BEGIN OF t_t005 OCCURS 0,
land1 TYPE t005-land1,
END OF t_t005.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(6) v_text FOR FIELD P_LAND1.
PARAMETERS: p_land1 TYPE t005-land1.
SELECTION-SCREEN COMMENT 13(35) v_text1.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_text = 'Country'.
v_text1 = ' '.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_land1.
REFRESH: t_t005.
SELECT land1
INTO TABLE t_t005
FROM t005.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = 'T005'
PVALKEY = ' '
retfield = 'LAND1'
dynpprog = sy-repid
DYNPNR = sy-dynnr
dynprofield = 'P_LAND1'
callback_program = sy-repid
value_org = 'S'
TABLES
value_tab = t_t005
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Naren -
Not able to set values in drop down for a table field
Hi All,
I am not able to set values in drop down for a table field. Although I am able to set these values to a stand alone field but its not happening for a particular table field. I am using ABAP web dynpro for coding.
Pls help.
Regards,
BhaskarHi Otto,
Here is the code I am using:
* navigate from <CONTEXT> to <DATASOURCE> via lead selection
lo_nd_datasource = wd_context->get_child_node( name = wd_this->wdctx_datasource ).
* navigate from <DATASOURCE> to <CHANGING_PARAM> via lead selection
lo_nd_changing_param = lo_nd_datasource->get_child_node( name = wd_this->wdctx_changing_param ).
* navigate from <CHANGING_PARAM> to <EDUCATION_TAB> via lead selection
lo_nd_education_tab = lo_nd_changing_param->get_child_node( name = wd_this->wdctx_education_tab ).
node_info = lo_nd_education_tab->get_node_info( ).
REFRESH ddlb_value_set.
DATA: wa_edu_est TYPE t517t.
SELECT * FROM t517t INTO wa_edu_est WHERE sprsL = 'EN'.
s_element-text = wa_edu_est-stext.
s_element-value = wa_edu_est-slart.
APPEND s_element TO ddlb_value_set.
ENDSELECT.
SORT ddlb_value_set BY text.
* Set Value_sets to node_info
node_info->set_attribute_value_set(
name = 'EDU_EST'
value_set = ddlb_value_set ).
Regards,
Bhaskar -
Rule Policies: Value drop down for category blank
Hello,
We have implemented Rule Policies in CRM 7.0. When entering a condition for attribute "ICWC_Category" the drop down for "Value" is blank. We have checked the following: Categorization schemas are active and user has access to display categorization schemas. When checking in all other systems, this is working with no issue, but in the productioin system, the value drop down is blank.
If you have any ideas to trouble shoot or recreate the issue, it would be appreciated.
Regards,
E. SimpsonHi Anil,
There is a SAP note availble for this problem.Please check.
Thanks,
Ashish -
When trying to download an APP, it's requesting setup for answers to 3 security questions and it hangs up the iPad when clicking the drop down for the questions...any ideas?
Had to do a hard reboot on the iPad and we were able to get the questions to pop up. Now it's just slow downloading the apps.
-
When setting up a SQL 2000 Database Maintenance Plan the drop down for Remove files older than is not populating with hours, days, weeks, or months. It is just blank. The version is Microsoft SQL Server 2000 - 8.00.2039 (Intel X86)
May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Desktop Engine on Windows NT 5.2 (Build 3790: Service Pack 2). Is there a fix for this issue?This also works. All the credit goes to a user named eyechart. Great directions provided as well.
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=47575
sqlmaint.exe
was missing from MSDE 2000, but that was fixed in SP1 I think. Since this is SP3
you probably have a missing registry value for the backup directory.
I
had to fix a similar problem last year on a bunch of laptops. They were all
missing a registry value. Anyway, here is the fix:
1. Fire up regedit and
look under HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer
2. Ensure you have
a string value called BackupDirectory. The value for this should be the path to
your backup dir. The default value is C:\Program Files\Microsoft SQL
Server\MSSQL\BACKUP
btw, this fix assumes you have a default instance
installed. A named instance will have slightly different registry location and
filesystem path.
-ec
Edited by -
eyechart on 03/25/2005 21:04:27 -
Drop down in report for selection texts on selection screen
Hi,
I have a selection screen for a custom report on which there is a selection-option for entering text-symbol value from selection texts of the same report.
Could anybody please let me know how to put a drop-down so that users can see selection texts before entering into this free form field.
Otherwise, could anybody let me know which table stores text symbols of the report?
Regards
KasiHi,
Here is the sample code for dropdown list box in the selection-screen,
SELECT-OPTIONS: LB_MACRO_KOART MYLIST(1) 5 COMMENT.
AT SELECTION-SCREEN OUTPUT.
PERFORM ADD_VALUES_TO_KOART.
COMMENT = 'Account type'.
END-OF-SELECTION.
*& Form add_values_to_koart
text
--> p1 text
<-- p2 text
FORM ADD_VALUES_TO_KOART .
TYPE-POOLS: VRM.
DATA: MY_LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF MY_LIST.
i_tab TYPE TABLE OF bseg WITH HEADER LINE.
DATA : BEGIN OF I_TAB OCCURS 0 ,
KOART TYPE C,
END OF I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'A'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'D'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'K'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'M'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'S'.
APPEND I_TAB.
CLEAR I_TAB.
Regards,
Azaz Ali. -
When start to enter username ("un")for an account that I use firefox suggests previously typed ones in drop down box. Accidentally typed a password next to my un, now everytime i begin to type un this presents as option i can click on to fill un field. If someone else wanted to login to own account on my comp firefox would show this. not secure. suggestions?
Remove saved Password(s): [http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Security: Passwords: "Saved Passwords" > "Show Passwords"
* http://kb.mozillazine.org/Deleting_autocomplete_entries -
How to disable drop down of Report Server
Hi,
i had install Report server 2012 and want to move form 2008 to 2012 .
1) how to disable drop down that show on folder and report level for end user (as shown in following screen shot).
2) report name coming on report server are not full name how to show full name of report like we have in 2008. Following is screen shotHi Mujahid,
1.) For migrating from Sql server 2008 to 2012, please follow this links
Migrating the whole Instance from 2008 to 2012 - > http://msdn.microsoft.com/en-us/library/ms143747.aspx
Migrating the rdl defination to 2008 to 2012 - > http://msdn.microsoft.com/en-us/library/a1a10c67-7462-4562-9b07-a8822188a161
2.) We can't disable the drop down box for the reporting services per user basic(end user), If you really want to do it, you
need to edit the ReportingServices.js file (This will effect all the user including admins) located at C:\Program Files\Microsoft SQL Server\<<SSRS Instance>>\Reporting Services\ReportManager\js\ReportingServices.js
If you want the end user not to perform certain action, you set appropriated permission for the report.
Managing Permissions and Security for Reporting Services
http://technet.microsoft.com/en-us/library/ms156014.aspx
3.) When report name is too long it truncated and dot dot are shown in the end. User always have a option to move from Title View to Details View
You need click on the right side of the report manager preview and click on the detail view to change between detail view and title view
Regards Harsh
Maybe you are looking for
-
Songs are on my iPod, but don't show up under the "Artist" heading
My problem is that all my music DOES import onto my iPod and work, but some songs do not appear in the "Artist" catagory. I can find the songs by looking through the "Album" catagory, but it doesn't work in Artist. Also, they cannot be found via the
-
Printing System Date on Report Title
How can I print the system date on the title of report generated by SQL*Plus? I remember it is possible to include SQL.PNO in the statement TTITLE to print the page number. Is there any variable like SQL.PNO which represent system date? Previously I'
-
I have used iTunes on a desk top with XP service pack 3 and have quite a bit of music on that computer. Recently purchased laptop with windows Premium Home and am now laoding iTunes on the laptop. How do I copy my music to the laptop and in the fut
-
Trouble downloading/installing Acrobat Reader 9.3.3
Help please. I have been attempting everything I know to get Acrobat Reader on my new computer. I am using a Windows 7 OS. I can start the download, it completes, but it does not do anything past then. I have administrator rights. I have attempt
-
hai any body tell me what is the purpose of maex table(legal control). what are the things we have to up load. thank you regards geetha