Drop Frame video (29.97) with Non-Drop Frame Time Code

Howdy All,
I understand that DF TC & Non-Drop frame TC are numbering issues and not frame
count issues, That said,
If I have an encoded file captured from an analog Beta Cam SP that has NDF TC
and that file has been encoded as 29.97, so that the resulting file has
a Frame rate of 29.97 with NDF TC from the source tape,
1) Does this constitute an error?.
2) Will this cause problems for the next guy?.
(having been "The Next Guy" in the past I prefer to handle such things on this end if it requires handling)
I have been looking for a straight answer but this specific cause/effect
is tough to track down.
Thanks in advance for any assistance,
KA

Well, starting as a linear editor I can tell you jam syncing and converting to DF will really screw up the TC. Every 10 seconds you'll have a TC number that's incompatible with the DF counting sequence.
If these are source tapes, you have nothing to worry about. I actually prefer NDF source while editing (I'm very old school) beacuse if I trim 5 frames on a mark I can calculate in my head where the new point would land regarding TC. With DF, I trim and often have to do a double take because the math didn't make sense.
Do NOT ever alter the time code on any source material unless you have a capture failure that you have absolutely no other way of working around.
Anyone can mix DF and NDF source time code on any system without any issues. The only problem with NDF is determining EXCACT running time of a completed program when delivering for broadcast.

Similar Messages

QT slideshow with non-uniform transition times?

I am creating a QT file which is composed of only still images, using "Import Image Sequence…". But I need the transition times from one slide to the next to be set individually, so one might stay for 10 seconds, another for 1. Is there any way to do this?
I have a rough reference movie which shows the images, at low resolution. The only way I have found is to select the duration of each image in the rough movie, copy the corresponding image from the high res movie, and "Add to Selection & Scale…".
Assuming this is the only way, what is the best way to compress the resultant movie to get good compression? I have Sorenson Squeeze.

You've figured out how to do it: import the images into an image sequence, then import them a frame at a time, add scaled, to your final timeline, then compress the whole thing.
For compression, I can't tell you what codec to use. But the trick is that you should NOT specify a frame rate for the export, because you want the frame rate to be 0 FPS while the images are displaying.
Of course the problem with this method is that you will end up with another video track for each slide. To avoid that, use another method:
Sources: Movie A is an audio track (or whatever sets your final length). Movie B is an image sequence imported at any frame rate. Movie C is a new movie which you are building into your final sequence.
a) Select the section of Movie A for the next photo
b) Copy, then create a new movie (we'll call it Movie D)
c) Paste the selection into Movie D and Select All
d) Select a photo from Movie B and copy
e) Add Scaled to Movie D
f) Select All of Movie D and copy
g) Paste into the end of Movie C
h) Close Movie D without saving
i) IF NOT (last photo added) THEN (a)
j) Save movie C as a reference movie, then compress it.
Doing that, you will end up building a movie one photo at a time, and it will end up with only one video track. It's less complicated than it looks.
--Dave Althoff, Jr.

Help Needed - replacing space with non-breaking space on the fly

Hi,
I have a text field I'm trying to fiddle the input on. Basically I want to replace all spaces (ascii code 32) with non-breaking spaces (ascii code 160) as they are typed.
It seemed as though a KeyListener was the way to go, and I've successfully detected whenever a space is sent. I can consume() that KeyEvent, or setKeyChar to change it to another key. But I cannot see how to change it to a non-keyboard character.
Any suggestions?

i think you can do smt likeDocument doc = mySwingTextComponent.getDocument();
doc.setDocumentFilter(new MyDocumentFilter());
class MyDocumentFilter extends DocumentFilter {
   public void remove(DocumentFilter.FilterBypass fb, int offset, int length) throws BadLocationException {
      fb.remove(offset,length);
   public void insertString(DocumentFilter.FilterBypass fb, int offset, String string, AttributeSet attr) throws BadLocationException {
      replace(fb,offset,0,string,attr);
   public void replace(DocumentFilter.FilterBypass fb, int offset, int length, String text, AttributeSet attrs) throws BadLocationException {
      text.replaceAll("SPACE","NB WHITE SPACE");
}asjf
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/text/DocumentFilter.html

How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
plications has shown that a good manual is your best friend.
Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
Jeremy

When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

please someone who help me please
when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

You need to help us first ...
Computer specs:
OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
Program specs:
Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
Footage file type: MXF, AVCHD, MOV, m2s, what?
Even the camera it was shot on can be of interest at times.
And did you use media browser to import, then project panel to drag & drop?
Neil

Dealing with non-square pixels from video capture (CS3)

Hi all,
This is the problem I have : I watch a video on my PC using any utility such as, for example, CyberLink's PowerDVD. I pause the movie to capture a frame to the Clipboard, then I paste it into PS CS3 via a newly created document.
Because the movie was shot and recorded on the DVD in widescreen format, therefore using non-square pixels (wider than they are tall), the still image in PS appears "shrunk" horizontally. I then go to Image|Pixel Aspect Ratio and set the ratio to, say, "D1/DV PAL Widescreen (1.42)", as I am in PAL-land. The still image now looks fine, and I can save it, for example in TIFF format ; it will retain its "non-square pixel" attribute, with the black bands on top and at the bottom.
However, what I utimately want to do is use that still image on the Web, so I need to save it as a JPEG image, and this is where the problem happens : the JPEG conversion reverts those pixels to square ones, whether I use the "Save for Web and Devices..." option, or just the "Save As..." one.
How can I turn my very heavy TIFF into a much leaner JPEG, while retaining the non-square pixels that give the image its correct proportions ? Is there a way around this problem ?
I'm not used to dealing with non-square pixel images, so any help and tip will be greatly appreciated. Many thaks in advance.
Dominic.

As Zeno said, you can simply copy&paste. Also, there is always an equivalent square pixel format for each anamorphic format that can fully accommodate the image, which would be 1024x576 for PAL widescreen. For more info on PAR conversions, I recomemnd you do some reading in the online help files for After Effects or Premiere Pro.
Mylenium

Need help with non-video clip transitions on the FCP timeline...

Hi all, I am struggling with this problem with the FCP timeline: I have a mix of things; .motn includes, .psd includes, etc. and I want to put a transition between them and a normal video clip, BUT, as u can guess, it does not work well. I guess because FCP can't see the frames inside the Motion file, it won't let u do a cross fade or whatever with any amount of time applied to it. So what to do?
I started to modify the motion files but realized this would not work, as I often use bits of one motion animation in various places starting and ending at different timecodes. So i need to be able to place a transition at the beg/end of motion clip on the fcp timeline. I started doing this:
1) place a slug above the track of a joining of motion/video clip
2) place the transitions on both ends of the slug.
Is this the way to go? I have dozens of these that I need to fix asap, so all advice is appreciated!
coocoo

Hi Cooco,
there are several ways to find out whether it is a [*matter of handles*|http://www.larryjordan.biz/articles/lj_handles.html]
One is to select the clip>hit the S key (slip tool) clickandhold it . A brown line drawing a rectangle will appear and will continue beyond in and out point revealing the available clip's handles. If not handles are available then the brown line will stay within the clip on the timeline.
Visit the link I sent to you to more understand handle matters.
G.
Message was edited by: gogiangigo

When using iPhone with Ford automobiles' Sync, the connection drops each time the ignition is shut off. In order to restore, the bluetooth must be turned off on the iphone, then restarted. Any suggestions?

When using iPhone with Ford Automobiles' SYNC, the connection drops each time the ignition is shut off. To restore, you must turn off the bluetooth on iPhone, then restart each time. Any suggestions?

There is an update avaialbe for Ford systems to correct bluetooth problems. You need to update your system.

Video chat with non mac users

does isight work with non-mac/ non-iChat users?

I have got it to work with iVisit (free for basic version) and a Windows XP user.
Found at this site
"D"

A frame with time code could not be found error

Hey all
So I just started using Speedgrade with my Premiere CS6 timeline exported as EDL, all RED (R3D) footage. When I input the EDL it only loads about 50% of the clips and pops up a red box like this:
So after a bit of Googling, the only solution I found was to ensure the time code base match, which I changed from 24fps to 23.976 which is exactly what is in my Premiere sequence. I then had to find the clips and drag them onto the gray box where it says "Reel not loaded". No big deal, took me all of 5 minutes.
I had also thought the above error was due to me having some high FPS clips in my timeline (120fps to be exact). However, even with no clips in the reels panel showing "Reel not loaded" when I stop at a couple of clips on the timeline I get this:
And as you can see in the reels panel the clip it is referring to has indeed timecode in that range.
Anyone have any ideas what could be causing this? I'm pretty sure it's related to the whole time base thing and it's dropping frames, but can't see how this can be true now that I've changed all instances of 24fps in the settings to 23.976 and that's what the Premiere sequence is showing, and also what is in the RED files.
And here's the metadata for the clip as shown in Red Cine X:
Cheers.

Facing many of the same problems over the last four days. It's been a total nightmare. Working on Speedgrade CC with .R3D files and conformed the timeline to match the 23.976 footage, yet I'm still seeing clips get rejected, along with dropped frames which both carry over to output files and seem to cause the program to crash.
Would love an explanation.

FILES: how do I get rid of EXEC status and set them to open with "none"?

I dropped my laptop and damaged the drive. My computer forensic friend salvaged specific files.
Transfered to a FAT32 drive and then copied to Mac.
Most of files are fine with the exception of some setings files that showed up as Unix executables. The few original files that I have to compare them to, show "Document" as the file "Kind" and the "open with" shows "none" in Get Info
When I look at the contents of the files they look fine. How do I get rid of the EXEC status and set them to open with "none"?
Any help would be greatly appreciated.
These are settings files for a set of .wav samples for an AU drum plug-in.

If you have xcode installed, you might want to find out what the type and creator code for these files should be. Since the files have visited a FAT32 file sytem, you will have lost all resource forks as well as type and creator HFS+ meta data.
So assuming you do have xcode, create a new AU drum plug-in file then in the terminal:
<pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">/Developer/Tools/GetFileInfo newfile</pre>
Then use:
<pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">/Developer/Tools/SetFile -t '(insert type)' -c '(insert creator)' oldfile</pre>
If there's a lot of these you might automate the process using the find command.
Cole

I can't get itunes video to work with my windows 7 64 bit system?

I have a windows 7 64 bit operating system and have loaded the version of Itunes designated for 64 bit systems. All of my audio content seems to work fine, but my video content is almost non-functional. If I try to play a movie or tv show, I get the sound but no picture. In frustration, thinking that I would be unable to use the movies i bought on Itunes, I got a converter to change the video over to mp4 format. Well, as soon as I started trying to convert the files, the player started functioning. I notice that after using the converter, my itunes video files work okay. If I restart the machine and itunes without the converter running, I get the old problem of no picture but sound. As soon as I start converting a file, then thing starts working again.
A related issue, is that I can not see the Itunes Homepage. I can open specific pages related to searches, but the drop down menus and links are hit or miss as to whether they work or not.

hello dshultz58, does it work if you use the windows installer for plugin-based browsers from: [https://www.adobe.com/products/flashplayer/distribution3.html]?

HT1338 why is the video not working with skype on this os

why is the video not working with skype on this os

Try this:
Quit Skype.
Click on the desktop so Finder is active. Hold the option key down and click on Go in the menu bar.
In the drop down, select Library.
Open the Library folder and scroll down to Preferences.
In that folder, there is a file called com.skype.skype.plist. Trash that file.
Now try Skype.

Problem description: My MacBook Pro is running really slow. Applications won't open or take up to 10 min. EtreCheck version: 2.1.5 (108) Report generated December 27, 2014 at 9:15:58 PM CST Click the [Support] links for help with non-Apple products

Problem description:
My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
EtreCheck version: 2.1.5 (108)
Report generated December 27, 2014 at 9:15:58 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HD (disk1) / [Startup]: 498.88 GB (5.04 GB free) (Low!)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[running] com.seagate.TBDecorator.plist [Support]
5 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
[running] com.carbonite.launchd.carbonitestatus.plist [Support]
[loaded] com.coupons.coupond.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[loaded] com.trendmicro.itis.dca.plist [Support]
[running] com.trendmicro.itis.uimgmt.agent.plist [Support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Support]
[running] com.carbonite.launchd.carbonitedaemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.trendmicro.icore.av.plist [Support]
[running] com.trendmicro.icore.main.plist [Support]
[running] com.trendmicro.icore.wp.plist [Support]
[running] com.trendmicro.itis.plugin.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
[invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
[loaded] com.trendmicro.itis.uninstaller.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User internet Plug-ins: ℹ️
npBcsMcTcIO: Version: Unknown [Support]
Safari Extensions: ℹ️
Trend Micro Toolbar [Installed]
3rd Party Preference Panes: ℹ️
Carbonite [Support]
Flash Player [Support]
Paragon NTFS for Mac ® OS X [Support]
Seagate Dashboard for Mac OSX [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
HD: Disk size: 498.88 GB Disk used: 493.84 GB
Destinations:
Jens Seagate Backup [Local]
Total size: 999.86 GB
Total number of backups: 6
Oldest backup: 2014-06-24 10:33:56 +0000
Last backup: 2014-12-17 17:14:18 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 493.84 GB X 3)
My Passport for Mac [Local]
Total size: 2.00 TB
Total number of backups: 14
Oldest backup: 2013-08-21 19:19:35 +0000
Last backup: 2014-12-19 11:44:23 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
      6% coreaudiod
      5% CarboniteDaemon
      4% iMovie
      3% JustCloud
      3% Wondershare Player
Top Processes by Memory: ℹ️
335 MB iPhoto Library Manager
180 MB Finder
142 MB iMovie
70 MB Preview
51 MB Microsoft Word
Virtual Memory Information: ℹ️
149 MB Free RAM
1.04 GB Active RAM
897 MB Inactive RAM
1.17 GB Wired RAM
30.53 GB Page-ins
1.42 GB Page-outs
Diagnostics Information: ℹ️
Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
Dec 26, 2014, 02:22:01 PM Self test - passed
Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]

You have nearly run out of disk space. Either purchase a larger one or start cleaning out the one you have?

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
Terry

Premiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

Drop Frame video (29.97) with Non-Drop Frame Time Code

Similar Messages

Maybe you are looking for