Drop function

Hi,
I have somewhere read that we can use the
DROP FUNCTION command to drop a function from the database.
If successful, both the object code and the source code will be deleted from the data dictionary.
Can someone please tell me what is the meaning of object code and the source code,I have developed many functions and I am using them,but didnt get the meaning of object and source code,the code that I m writing for creating a function what does that code mean,is it object code or the source code,
what is the difference between the two and how they are useful
thanks

Probably read introduction in
http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14261/limits.htm
and metalink Note:62603.1 'PLS-123 Program too Large' - Size Limitations on PLSQL Packages
if you have access to metalink.
Generally you don't care of the compiled version (object code, m-code, Descriptive Intermediate Attributed Notation for Ada (DIANA), whatever else it is called).
Gints Plivna
http://www.gplivna.eu

Similar Messages

  • Drag and drop functionality in CM25

    Hello Experts,
         I am trying to configure CM25 so that when you drag and drop to change the start and end times on an operation within a process order, but to block the work centre being changed.  Ideally I like the user to be prompted to ensure they intended to change the work centre, but could live with a hard stop.  I have drag drop function set to AV09 (Function "Operation at time&work centre") at the moment.  I see there is a user exit defined on AV10 but haven't been able to establish what code this exit triggers and would like to get to the AV09 code as it pretty much does what I want.  I don't want to limit the screen to a single work centre as I want to see all related operations as need to see the work centre utilization for whole order across multiple processes, to ensure end times of one operation corresponds to start of the next.
    I am also looking to prevent capacities being moved at all once the process order has been started as effectively this process is locked in at this point and you cannot physically reschedule the remaining time.  (I know I am only supposed to pose one question at a time, but I believe this will be controlled within same configuration)
    Any suggestions / advice welcome,
    Regards,
    Jez

    Hello Jez,
    AV10 calls, from what I have been able to find out, the same exit that menu option Functions -> User (so enhancement CY190001). However, I could not as yet find a way to know where the user has dropped the object (to do the check, and to be able to continue with AV09 afterwards). The enhancement documentation only mentions how to get more information about the object, but not about where it was dropped.
    I am trying to use this to solve http://scn.sap.com/thread/3534956.
    Have you managed to find anything else on your side?
    Regards,
    Rui

  • HT4061 Drag and drop function in Windows 8 doesn't work with iTunes.

    How to import music files from Windows 8 to iTunes 11.0.3 x64? Drag and drop function doesn't work. Thank you!

    > Straight drag and drop to PS produced a warning message so, when I then tried to drag on to the PS task bar button, I got the Ø cursor but on moving into the PS window and releasing the mouse button there, the file opened.
    That's the strangest behavior that I would imagine. Are you using the default vista aero theme or you have turned down or using custom theme and visual effects?
    > it needs to be pointed out that this is a really bad habit that will smack you in the face one day...
    I don't understand what you mean. If you are concerned about viruses, in my understanding copying and opening a file from the internet which is what "Save image as" does, is less safe than coping and pasting pixels. Copying and pasting pixels is the same as coping and pasting text from your web browser, it can't execute hidden code. If that was possible everybody will get viruses at the moment text or pixels are displayed on your browser.
    By the way when you view a page from the internet, image files are already downloaded in the temp folder of your computer but only the browser uses them unless you open them from there and use in another program. So if you have a virus protection the images are already scanned.

  • Unable to use "drag and drop function" from outlook

    We are changing from Lotus to outlook and this has made a problem with getting pdf-files into OAWD directly .
    Procedure was like this in Lotus
    1. We get documents (FI, F-43, aso ) by email
    2. We use OAWD function "drag and drop" , document is attached to a document type and workflow is triggered
    3. We pick up documents from Business workplace , handle the document and send it to the approver (who earlier got it directly in their mailbox "lotus")
    so far so good , everything worked well
    Unfortunately we changed to outlook, non attached files can be "drag and dropped" into OAWD (I understand the part about outlook is showing links instead of "real" pdf and know this is part of the problem)
    My question, it can not be possible that we have to manually save the documents/attached files from outlook into "desktop" to later use the drag and drop function?
    I have read about the programms to solve problem , ex "inPuncto", but our experts says there will be problem with connector to workflow from OAWD.
    I have my greatest doubts about that because this must be really two diffrent moduls, one for converting from outlook and the other must be unchange (undependent of the earlier procedure). SAP can not know from what program the documents will be dragged? 
    Suggestion about some OAWD-adaptor ?
    Any suggestions about great solutions ?

    it seems there is no way.
    See note 1797073
    Is there someone with a better solution?

  • SharePoint 2013 How to disable Drag and Drop Functionality

    Hi,
    In SharePoint 2013 in document library we have default behavior of drag and drop documents in document library. How to disable drag and drop documents in document library?

    Hi,
         As a work around, you can edit the Drag and Drop js as to remove the drag and drop functionality, edit the document library page (default
    page) place the content editor web part on top of the library include the modified Drag and Drop js file in the content editor web part, Please save the Drag and Drop js file to other location (probably Site Assets library etc).
    Hope it helps!!!  
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

  • Problem in using AdvanceDataGrid as tree with drag n drop functionality

    Hi All,
    I am using AdvancedDataGrid as tree for displaying my data. Within this ADG tree I have to enable drag n drop i.e. user can select one node and will able to drop that on another node within tree.
    Overwritten dragDrop handler event for ADG.
    Issues: Not getting target node on which I am dropping currently selected node.

    Please don’t use this forum for support questions, go use flexcoders or the Adobe forums instead.
    Matt
    On 2/10/09 11:21 PM, "rakess" <
    [email protected]> wrote:
    A new discussion was started by rakess in
    Developers --
      Problem in using AdvanceDataGrid as tree with drag n drop functionality
    Hi All,
    I am using AdvancedDataGrid as tree for displaying my data. Within this ADG tree I have to enable drag n drop i.e. user can select one node and will able to drop that on another node within tree.  
    Overwritten dragDrop handler event for ADG.
    Issues: Not getting target node on which I am dropping currently selected node.
    View/reply at Problem in using AdvanceDataGrid as tree with drag n drop functionality <
    http://www.adobeforums.com/webx?13@@.59b7e11c>
    Replies by email are OK.
    Use the unsubscribe <
    http://www.adobeforums.com/webx?280@@.59b7e11c!folder=.3c060fa3>  form to cancel your email subscription.

  • Is it possible to create a tree with drag-and-drop functionality using ajax

    I saw these samples;
    Scott Spendolini's AJAX Select List Demo
    http://htmldb.oracle.com/pls/otn/f?p=33867:1:10730556242433798443
    Building an Ajax Memory Tree by Scott Spendolini
    http://www.oracle.com/technology/pub/articles/spendolini-tree.html
    Carl Backstrom ApEx-AJAX & DHTML examples;
    http://htmldb.oracle.com/pls/otn/f?p=11933:5:8901671725714285254
    Do you think is it possible to create a tree with drag-and-drop functionality using ajax and apex like this sample; http://www.scbr.com/docs/products/dhtmlxTree/
    Thank you,
    Kind regards.
    Tonguç

    Hello,
    Sure you can build it, I just don't think anyone has, you could also use their solution as well in an APEX page it's just a matter of integration.
    Carl

  • Captivate Drag and Drop Functionality

    Please could someone confirm when Captivate will ship with drag and drop functionality as standard rather than as an extension only available to subscription or ASA users?
    Thanks.

    Adobe doesn't usually give any advance confirmation dates for when they will ship a new product version or patch.

  • WD ABAP: Drag and drop functionality

    Hi,
    Is there a UI element/event to simulate the drag and drop functionality in Webdynpro ABAP? I would like to simulate the functionality of context mapping.
    I have the requirement to show the hierarchy of say Country and state(preferably in tree structure) and allow the user to change the country a state belongs to by dragging the state from one country and dropping it into the desired destination country.
    Thanks and regards,
    Srini.

    Hi Srinivasa,
    Drag & Drop is not available within Web Dynpro as of now.
    Kind regards,
    Thomas

  • Does SAP ECL viewer has drag and drop functionality...

    Hi,
    Does ECL viewer has drag and drop functionality for example we can drag and drop file from windows sever to SAP. So that it can be used later on using BDN.
    Thanks.
    Regards,
    Rajesh.

    Implement this program,  it is a cut/paste solution.  Again, you must have the ECL component installed on your SAPgui.
    report zrich_0001 .
    parameters: p_check type c.
    start-of-selection.
    at selection-screen output.
      data: dockingleft   type ref to cl_gui_docking_container,
            dockingright  type ref to cl_gui_docking_container,
            ecl_viewer   type ref to cl_gui_ecl_2dviewer,
            html_viewer  type ref to cl_gui_html_viewer.
      data: repid type syrepid.
      data: url(2048) value 'c:'.
      repid = sy-repid.
      check dockingleft is initial.
      create object dockingleft
                  exporting repid     = repid
                            dynnr     = sy-dynnr
                            side      = dockingleft->dock_at_left
                            ratio     = 50
                            extension = 1000.
      create object html_viewer
           exporting
                parent    = dockingleft.
      call method html_viewer->show_url
           exporting
                url       = url.
      check dockingright is initial.
      create object dockingright
                  exporting repid     = repid
                            dynnr     = sy-dynnr
                            side      = dockingright->dock_at_right
                            ratio     = 50
                            extension = 1000.
      create object ecl_viewer
          exporting
             parent             = dockingright
          exceptions
             cntl_error         = 1
             cntl_system_error  = 2
             create_error       = 3
             lifetime_error     = 4
             others             = 5.
         call method ecl_viewer->create_toolbar
            exporting
                close_button      = ' '
                tools             = 'X'
                viewer            = 'X'
                navigation        = 'X'
                options           = 'X'
                viewer_openfile   = 'X'
                viewer_savefile   = 'X'
                tool_measurement  = 'X'
                remove_document   = ' '
            exceptions
                cntl_system_error = 1
                cntl_error        = 2
                cntb_btype_error  = 3
                dp_error          = 4 .
    Now drap a PDF file from the left container, and drop in the right side.  Slick, right?
    The ECL doesn't handle every file type,  but PDF works good.
    Regards,
    Rich Heilman

  • Outlook Drag 'n Drop functionality does not recognize BP Code

    Hi,
    I am using Outlook Drag 'n Drop functionality (with cockpit) in order to synchronize incoming e-mails. However, it does not recognize the BP and it lets the field blank. I have set the e-mail into the corresponding field on Business Partner as well as Contact Person. Isn't this the unique key for choosing automatically the BP?
    Thanks
    Gerasimos

    Hi,
    I am using this in 8.8 PL16 & sometimes it recognises & sometimes not. I hadn't given much thought to when it works or not, but wll start checking

  • Records Management - Drag and drop functionality

    Hi,
    I'm trying to find out how it is possible to limit 'drag and drop' functionality for nodes. For example, let's say we have model nodes A and B with all element types assigned and visible for all roles. I want to be able to automatically store documents in both A and B nodes but not to be able to drag and drop documents from node A to node B.
    Does anyone have idea if/how this is possible?
    Many thanks in advance!
    Tijana

    Hai,
    To restrict the drag and drop functionality, please check the function module SRM_REC_UPDATE_NODE_DESC. I havenu2019t implemented this but I guess this would help you.
    Regards
    Keerthika

  • Drag and Drop Function Stopped Working

    So I may just be dense, but my drag and drop function isn't working anymore. I've been searching the internet for anything that might help, and I've tried all the solutions that I've seen. No luck though. This is a really annoying problem and if anyone has suggestions I'd love to have some help. Thanks!!

    So those ideas on the other thread didn't help. I think if I reinstalled leopard it may fix it, but the problem there is I don't have the disk at school with me. Having no foresight ruins things.
    Would that be the only option or does anyone have other thoughts?

  • Drag and drop functionality not working. IE shows ActiveX error

    Hi all,
    we recently installed new server, but on the new server the drag and drop functionality in web dynpro application is not working.
    when we launch the standard test application wdr_test_drag_and_drop, the Internet explorer is showing a popup: An ActiveX control on this page might be unsafe to interact with other parts of the page. Do you want to allow this interaction? Yes/No
    if we allow by clicking Yes or No, the drag/drop functionality is not working.
    first I checked if the issue is with my IE version, but it is not working in any of the IE in any computer.
    when I checked the same application from different ecc server on my IE, the different server application is working.
    in my new server, do we need to do anything more to make the drag/drop working.
    thanks,
    Madhu_1980.

    Hi Madhu,
    GO through this link,  it might help
    Step 1: Go to the Tools menu, and select Internet Options
    There are times when the activex plugins are disabled in our browser settings, just enable them and give it a try.
    Regards,
    AkkI

  • Drag and drop functionality

    Hi,
    I am developing an e-learning module in captivate6, i want to know what level of drag N drop is feasible considering the output to be HTML5. Is label dragging to a diagram possible?
    Also what types of drag N drop functionality is available?
    Thanks,
    Sona

    Which version of CP6? Only 6.1.318 supports Drag&Drop. For previous versions only external Drag&Drop widgets were available but only for SWF-output.

  • Drag and Drop Functionality within the SAP Portal

    Does anyone know if SAP Netweaver Portal 6.0 sp18 supports drag and drop technology.  A good comparison would be Google where a user can drag iViews around and place them where they would like.
    We are trying to build something similar to Google Gadgets with iViews and we would like our users to be able to add, remove, drag, and drop them in the Portal.
    Has anyone done something similar to where I would be able to leverage them for further questions.
    Any help is greatly appreciated.  Thank you.
    Jason

    Hi
    Were you able to find away of using the drag and drop functionality?
    I am wanting to use a similar functionality to Yahoo where people can just drag the iViews they want into the page and saving their personalised settings.  I am unable to find information as to what Portal release supports this functionality and how it works.  Would you be able to help?
    Many thanks
    Jag

Maybe you are looking for

  • Not able to see the request in ODS to activate

    Hi all, I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popu

  • Error message when ordered more items than it's available in stock.

    Hi again, I've noticed that on the Commerce Reference Store (CRS) if I order, let's say, 10 "branded belt black large" and there's only 5 available in stock my order goes through and the order's status is set to "Pending Merchant Action". Instead of

  • Acrobat freezes up after being open approx 14 seconds

    Here are the issues that I  have found with my version of Adobe Acrobat: Adobe Acrobat Pro 9.0 Windows XP Adobe Acrobat Pro 9.0 Issues: After about 14 seconds, the Acrobat Pro 9.0 locks up.  The only way to stop it is to end the program.  There does

  • Error while saving Product

    Hello all, I am trying to create a Product. On saving it says "data cannot be maintained for set type COMM_PR_SHTEXT" I have been advised to "Goto Transaction: COMM_HIERARCHY  Open your Category. On the Category Data - > Set Types -> include the Set

  • Debug object too large

    Hi, When i try to debug webkit on solaris, i get this issue: libwebkit-1.0.so.2: Value too large for defined data type terminating signal 9 SIGKIL -rwxr-xr-x 1 jack staff 2.9G 2010-10-14 02:32 .libs/libwebkit-1.0.so.2.17.5 Any way to get around this?