"Drop shadow" creates a line - problem

Hi,
I'm in process of making a map (17x22 inches) and I encountered quite disturbing problem with "drop shadow" effect.
I tried to drop shadow on an object 12x18 inches size with those parameters:
And I got nice result on all of the shape, except the lower part, which give me a line. Like cutting through the shadow thing:
I will add that object is on the layer alone and nothing is interacting with it.
At first I thought that maybe this is display problem, not the shadow itself, so I zoomed in and out, but nothing changed. Then I made sure that all anchors are connected one to another - I'm sure the object IS closed. I tried to manipulated anchors points, changed shape of the object a bit, add, remove some anchors, changed shadows parameters - nothing made any difference in how the shadow looks like. Any ideas?
Thanks,
Ania

Your file helped me a lot, Larry. But I still think I got some nasty bug in my original file and I will explain You, why I still think that.
When I opened Your file the shadow was flawless. But when I copied the object You sent me to my old file to replace it, the line appeared in the exactly same place. I thought that maybe, in some weird way other layers and objects mess with that effect but no... When I started to copied objects FROM my old file to YOUR new fixed file, shadow remained nice. So it seems that my old file is somehow corrupted (calculating gaussian blur seems to be the problem there), on the new file - where ALL parameters are the same, all the layers and shapes are the same as in old file except for Your "Drop Shadow" effect - there is NO such problem. Look:
My old file after copying Yours fixed object (line again!):
And here Your file with all the rest of my graphics:
So thanks to You, I may keep on working on my project but the mystery remains.
Cheers,
Ania

Similar Messages

Fixing Drop Shadow, create its own lines

Hi everyone, Been playing with illustrator all day and its been a blast. Im trying to put a drop shadow on this, however, theres a huge line that I can seem to get rid of that cuts through from the M to the F. (please refer to the pic). I know its not an anchor point or anything, but how the hell do i get rid of this? its driving me nuts! THANKS!
-Jonny

it looks like the MF is formed of a single open path and that path has a white fill. if a path is open, the fill will just cut straight between the endpoints of the path. select it and give it a fill of 'none' (the red slash box below the stroke/fill tools). since that's also the fill on the bottom of the F, you'll see through that too.

Why do drop shadows created in Illustrator CC randomly change their color mix?

Drop shadows that I've created in Illustrator CC will randomly change their color mix when they are different mixtures of cmyk black, usually after closing and opening again. For example, if the drop shadow is 75c 68m 67y 90k, the next time I open the file it will 20c 0m 0y 100k. This happens with many of my files, and has been going on for several months. Thanks.

Hey I found out from the developers that this is actually fixed in version 29 via Bug 965861. Try the pdf viewer in the next version of Firefox, this will take care of that gradient. :-) Cheers.

Drop shadow in .ai causing transparency problems for .eps (needed for MS Publisher – PDF)

I have icons with drop shadows created in .ai. I need to make the icons available for others who use MS Office Publisher to create print materials (export to PDF). I use .eps files for this however the drop shadow is making a white background (if I take out the drop shadow the background is transparent). How do I save the icons so that the background is transparent with the drop shadow?
Thanks.

Simply, you don't.
EPS is a flat file format and does not support transparncy, therefore all transpency is flattened upon saving.
You may be better off saving as png or pdf to support transparency.

Drop shadow causing faint rectangles showing in final printed book cover

Greetings experts!
Hoping I can get a translation and a nod as to whether I am on the right track. I have taken a two-day beginner's course in InDesign and am getting past the edge of my knowledge on this issue.
Publishing a 112-page book, perfect bound, with full color cover.
The printer ran the cover a little darker this time, and some pesky faint rectangles showed up around the book title which is reversed out of a photograph. The title has a drop shadow.
I found the following reference, but am not sure what the terms mean and what I'm supposed to adjust. Any help much appreciated. See below for article reference.
Kindest regards,
spnDesign
"Clip Complex Regions Ensures that the boundaries between vector artwork and rasterized artwork fall along object paths. This option reduces stitching artifacts that result when part of an object is rasterized while another part of the object remains in vector form. However, selecting this option may result in paths that are too complex for the printer to handle.
"Stitching, where rasters and vectors meet.
Note: Some print drivers process raster and vector art differently, sometimes resulting in color stitching. You may be able to minimize stitching problems by disabling some print-driver specific color-management settings. These settings vary with each printer, so see the documentation that came with your printer for details."

A couple of other things: check your transparency settings, and set them to High Resolution.
When printing to press, you should always use/send CMYK unless the printer asks you not to. Sending RGB images to press is asking for them to be converted on the fly and you may see color shifts.
Also, check the level of PDF compatibility you're using when converting to PDF. Converting at 5.0 and later passes transparency into the PDF, but converting at 4.0 causes it to flatten transparent elements, and you may get better results. Drop shadows created in InDesign are transparent elements.
Finally, if the drop shadows ARE created in InDesign, I've seen a note somewhere that the transparency effect blend mode should not be set to "multiply," even thought that is the logical mode to use. This may have been an issue only at CS2 however.

Changing Drop Shadow Default - PSE3, Mac

Is there a way to change the default setting on the drop shadow length of 21 to a lower number? 21 just is way too much for a layer with say an envelope. An envelope just wouldn't leave that large of a drop shadow! I'm much more likely to need to lower the size that to raise it to something over 21. Another question...is there a way to select another color for the outer glow colors?
Thanks!
Debbie

Debbie, et al,
When I spoke of "High" and "Low" it was in reference to two of the Drop Shadow presets found in the Layer Styles palette, in the Drop Shadows group. That being said, I have observed something else!
The distance of the drop shadow created is relative to the resolution of the image. The higher the resolution, the greater the drop shadow distance, in pixels, shown in the Style Settings dialog.
For instance, when I reported my earlier values of 29 and 5, I was working with a document with a resolution of 72ppi. When I apply the same High/Low styles to a document with a resolution of 300ppi, I get distances of 121 and 21 pixels, respectively. A resolution of 100ppi receives shadow distances of 40 and 7.
Thinking about it, it makes sense that the number of pixels of shadow "distance" would vary with the resolution, to represent a similar appearance for "High" and "Low" from image to image.
Of course, this will only complicate Debbie's issue of managing the initial Drop Shadow distance setting, because we now know that it varies with image resolution. *sigh*
Byron

Drop shadow on eps shape produces fine line when inserted into InDesign and PDF created.

Hi I am having a few issues with an eps file that I have created. Basically it is a eps file with shapes, a gradient and a drop shadow on the outlined text - created in illustrator.
All looks fine until I take it into Indesign and create a pdf. I then get a line around where the drop shadow is. Zooming in doesn’t make it go away, but it also does not change its size.
I have done some research and tried one fix (have the drop shadow as another object using multiply as the opacity) this did not work.
Anything else talks of spot colours (there are none) or just having view ok on the screen (take off smoothing). But none of these are fixes for when I send this image to my client. I also tried saving as different pdf formats but this also does not work.
The only way I can make it go away is to save the file as an illustrator ai file and use that for pdfs. This would be OK, but other suppliers need to use the file and want eps format.
From what I have read, it seems to be a screen artefact and so theoretically should not appear when printed. But I do not know this for sure and I hesitate to send it to the client as it is.
Has anyone seen this before? And are there any fixes (e.g.: treating the drop shadow differently)?
Thanking you in advance.
Cheers
Nikola

NViereckel schrieb:
The only way I can make it go away is to save the file as an illustrator ai file and use that for pdfs. This would be OK, but other suppliers need to use the file and want eps format
EPS is simply unsuitable when dealing with transparency (which is what your drop shadow is). So you need to work with AI for placing in InDesign. If other suppliers need EPS, then just send them that. Nothing should keep you from exporting another file format.

Line appears when applying drop shadow on large scale

Hello!
Some weeks ago I had to make a large scale graphic (800mmx2000mm) for a roll-up banner. I wanted to apply a drop shadow to a rounded shape, and ugly lines came up. Since it was a bit urgent, I decided not to use it.
But now I'm curious, so I quickly made an ellipse and added a shadow, so you know what I mean. This also happens when I save it as pdf or image.
Perhaps someday I will have to use a drop shadow on large scale. So, does anybody knows how to fix this or what could I do in case I need to use this effect in these conditions? I use Illustrator CS6 in Mac with Mavericks.
Thanks in advance.

Mike Gondek wrote:
I was able to create an ellipse to your dimension and got a good drop shadow. What happens if you manually make a drop shadow using appearance?
FYI I tried making the same using drop shadow filter in CS5 and got this error.
Incase your file was created in CS5 and opened in 6, I would recreate the drop shadow in CS6. I know they redid the gaussian blur in CS6, but not sure if that affected drop shadow.
CS6 is better on raster effects at large sizes.
My file was created and opened in CS6.
My ellipse is around 175cmx50cm. I tried it manually like you said and got the same results:
So, I guess I'm alone with such a problem. No idea what is wrong :/

The drop shadow or even the type does not show up on the PDF created from SC3

I've created the legends on charts and the text on path and drop shadows are applied.
when I make a PDF, some text get dropped all together as well as the drop shadows do not show up.
Can someone help to solve this?
The only way is make a jpg. files and then create a separate PDF off the Acrobat.
It works but I would like to save the steps.
Thanks!

Hello markshepherd1,
Thanks for using Apple Support Communities.
According to the following article, when you're going through the process of burning a playlist to a disc, you have the option to select "Include CD Text".
If you’re creating an audio CD, choose your options:
Change the recording speed:
Choose an option from the Preferred Speed pop-up menu.
When you burn an audio CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Change the amount of silence between songs:
Choose an option from the Gap Between Songs pop-up menu.
Have all the songs on the disc play at the same volume:
Select Use Sound Check.
Include information that disc players in some vehicles can display:
Select Include CD Text.
iTunes 11 for Mac: Create your own CDs and DVDs
http://support.apple.com/kb/PH12148
Take care,
Alex H.

Using Bridge to Camera Raw to Open Image button also drop shadow problems

I remember when I was working with RAW in PSE 8. I would be in Bridge looking at a pic and double click on it. PSE 8 would open in Camera RAW and I could play with the pic a bit, make some adjustments, then click on OPEN IMAGE. When I did that it would open in PSE and it would be in jpg format. With this PSE 9 and the updated Camera RAW 6.3, when I punch OPEN IMAGE I still have a picture labeled .CR2 which I think still means RAW. When I double click in Bridge the .CR2 pic shows as 8 bit depth. I can do a little more work on it and use SAVE AS. When I do that, the sample file name that shows is still in .CR2 format and I must change that to .jpg and then below change from PHOTOSHOP to JPEG to save my file as a jpg file. Is there something that I have to change in preferences to get it to open the image in jpg format when I hit the OPEN IMAGE button? Or, is this an "improvement" with RAW 6.3? Also, I seem to be having trouble adding a drop shadow (or any other effects) on jpeg pics. At least it doesn't show up on the screen after I apply it. I just recently updated to Camera RAW 6.3 and updated my Operating system on my iMac computer to OS 10.6.6. I emailed this request to my good friend with an identical setup on his iMac and he is having the same response when performing the above operations. Any ideas what the problem might be?

Okay, previously you seem to have been using the bridge version of camera raw to edit your raw photos. That has many more options than the PSE version of the raw converter. (If you still have PSE 8, you can see the difference by using File>Open in the editor to open a raw photo for the PSE version of ACR, which works the same way in PSE 9.) In PSE's raw converter, you use the Open button, then save your photo in an image format in the editor. The Save button in ACR in PSE is only the DNG converter.
Layer styles should work exactly the same way as in PSE 8. However, in any version of PSE a drop shadow, like a real shadow, needs someplace to fall, so unless there is empty space on the layer, it won't appear. Try creating text or drawing and simplifying a shape and adding a drop shadow. Does it appear then?
Also remember that Jpegs won't let you save either layers or transparency when you resave the file.

Having a problem: Placing image or putting drop shadow on rectangle causing entire page to lighten up.

I don't know how to word this properly, so I'm sorry if I'm doing this all wrong! I'm having a problem with my document in indesign. I have placed a jped image on the page to serve as the background image. I did this on the master page. I first noticed this problem when I was trying to put a .psd image onto the page. When I did, it would cause the entire page to dramatically brighten! I finally gave up and moved on, and now I ran into the problem again when I created a new rectangle box. I put a drop shadow effect on the box and when I did this, it also made the entire page lighten up. Any suggestions on how to fix this problem??
Thanks so much!

Whenever you add a transparency effect such as drop shadow over another image, especially a grayscale image, InDesign changes how the page is rendered to reflect what it will look like when printed. As I understand it, nothing has changed but the display. Choose View > Overprint Preview to avoid such surprises and get a more accurate representation of what you'll see when printed when colors are separated. If your document is going to be output to PDF or SWF, choose Edit > Transparency Blend Space > Document RGB instead of Document CMYK.

Drop shadow problem

Hi,
We face the below mentioned problem. Would be great if someone could help us.
Due to problems with uploading the attachment here, please send a email to the following email-id ([email protected]) and I shall send the attachment in response.
Problem Description: Clicking dropshadow in air component should bring focus to other application behind the air application.
Steps to Reproduce:
1. Open any applications in full screen. ( ex : MSWord, Notepad )
2. Run the DropShadow sample.
3. Click the shadow portion in the panel component.
Actual Result: Clicking the shadow area in the panel component is setting focus to the same DropShadow application.
Expected Result: If some other application are opened in fullscreen ,then clicking the shadow area in the panel component should change the focus to the applications which is behind DropShadow application.
Thanks in advance.

After looking at your code your application is behaving as it should. Essentially your flash element is defining a drop shadow. It is part of your application therefore when the user clicks on it, it's like clicking on the rest of the application.
Some programming languages get around this by using regions and relying on the operating system to generate the drop shadow (when available.) For instance in a C# application you would define a region, clip everything outside of it (so that it is transparent) and then use the windows API to shadow your application. When using the API the OS then uses it's rules to define whether you clicked on the application or not. This also leads to all sorts of weirdness when you have anti aliased window shapes (curves and the like) and do not want them to look terrible.
So AIR applications handle this by allowing you to have completely transparent windows if the underlying window manager supports it. The drawback then is that you are not using the OS to define your shadows and so your shadows are part of the application window and clickable. On the plus side AIR allows for a great bit of flexibility that is not so easily attained in other ways. (I once lost about 2 weeks of my life on a C# app just getting rounded edges to not look extremely horrible.)
For an illustration consider if you created a custom popup menu that was 50% transparent. For all intents and purposes to AIR that is identical to the drop shadow you are creating here however in that instance you would want it clickable etc.
Hope that helps!

Drop shadow problem with Illustrator CS5

I've used drop shadow several times with no problems in both photoshop and Illustrator... currently I'm dropping a white shadow onto a black background and although the shadow drops correctly around the object I've noticed that there is some sort of extra white blur that is happening several inches away from my images reguardless of what shape they are. Let me know if a file would help and I can email an example of the problem. Thanks

Wade, This does look like the exact problem I'm having. I do not want to make a clipping mask because I have around 20 pages with numerous images on each page of varying sizes... I tried- Effect/Document Raster Effect Settings, Under options I played with a couple different settings but none seem to have fixed the problem... There is a check box for;
Anti-alias
Create Clipping Mask
-Add _____ in. Around Object
Preserve spot colors
I'm not familier with these settings and didn't know what you were recommending I change exactly?
Thanks again for the help

Pages, printing: still problem with drop shadows . Frustrated. :

Hi -
I've spent most of the afternoon trying to get my Pages document to print properly.
I am experiencing the drop-shadow issue :heavy black clump instead of artfully placed& delicate. Printouts do not resemble what is onscreen or in preview etc.
Having read through the forums; the links; the (cruddy) Pages Help and manual; installed new HP offficejet all-in-one software...
I still get the same result.
Most of the threads don't quite fit my situation.
For instance: Several comments have to do with older versions of things. Because I do have Pages 2, I am on Tiger OS X10.4.7 , upgrading is not my problem.
One of the threads had fairly explicit directions to make a new filter in Coloursync which led all the way to a "change resolution" menu but didn't offer advice on what resolution
modification to make. rrrrrrrr..
I am pretty lost at this point and really just want to print out a document that looks like what I have designed.
What? How? Help! Please?

tried to print directly from Pages
If printing directly from Pages does not work then it must be an aspect of your printer. Some printers have a black and white setting that might not read shadows (which are more like greyscale) With the doc opened press ⌘ +p and browse through the options of the printer's pulldown menu and see if there are any settings that might be incorrect. (Check, in particular, your 'color sync' and 'print settings' options in the pull down menu.)
Kurt

Thin white line around black .ai logo and drop shadow question

Hello,
There's a very thin white line all around a black .ai logo I made when placed on a color background. It shows up in printing and acrobat (PDF % compatibility) too. Also, is there any way to get a transparent drop shadow (no white boxes) when saving as eps.
Thanks
Running OS10.4.11 In Design CS3, intel mac.

Is the logo rasterized in Illustrator? It sounds like something was antialiased against a white background.
>Also, is there any way to get a transparent drop shadow (no white boxes) when saving as eps
No. EPS does not support transparency. If an area is not fully transparent (because nothing is drawn there) then it is fully opaque. PDF and AI support transparency.

"Drop shadow" creates a line - problem

Similar Messages

Maybe you are looking for