Drop shadow effect--I can't get it to stop!

So I have successfully used the drop shadow effect in PSE 6.
But I can't figure out how to disengage this effect. I started using the clone stamp tool after I was done with drop shadow, and now all of my clone stamps have drop shadows!
I don't want no more drop shadow. How do I get it to stop? I've looked and looked and don't see anything obvious. Thanks.

JimSned wrote:
Thanks! That worked.
But there must some way to disengage those effects after you're finished using them.
They usually don't hang around. I'm glad resetting the tool solved the issue.

Similar Messages

How can I apply drop shadow effects to graphics and pictures? It was very easy in previous versions and I can't find it. Thanks

How can I apply drop shadow effects to graphics and pictures? It was very easy in previous versions of Final Cut and I can’t find it. Thanks

Try this one, works marvelous:
http://www.rippletraining.com/using-the-rt-drop-shadow-in-final-cut-pro-x.html
Regards
Nolan

Drop Shadow Effect Cannot Be Seen

I'm using CS4 for Windows and I own several great books for it, yet I'm still struggling completing a simple drop shadow effect on a photo. No matter what I try from using the simple drop shadow fx or complex suggestions building several different layers, I never see the final effect on the photo. I even click and unclick "preview" but it makes no difference. The photo displayed in my CS4 window continues to look just like the photo when I first opened it. Am I supposed to flatten the layers or somehow bring them together into one layer?
I'm stumped.
I'd appreciate any help. I'm sure I'm doing something completely ignorant, but I'm willing to make myself look a fool to finally resolve this.
Again, thanks.
Regards,
Bob

The drop shadow appears on the transparent side of the opaque/transparency interface. You can't get a drop shadow on a totally opaque layer because there's no such interface. If you're working on the background, convert it to a layer or duplicate it and work on the duplicate. Select the object which is to cast the shadow and put it on its own layer (CTRL J). The area outside the selection will be transparent. Highlight that layer, double-click to the right of its name on the layers palette to bring up the layer effects dialog box. Select the drop shadow effect, and tweak the settings including opacity to define the shadow. While the dialog box is still open you can drag the shadow to any position. Once you close the dialog box, the object and shadow move together.

Blur control disabled for Drop Shadow Effect and Filter

Win2k Pro
2GB Ram
AICS 11.0.0
This is odd: the blur control in the Drop Shadow Effect and Filter dialog boxes is disabled. It seems to me there was a time it was ENabled.
This is the situation for both vector and bitmap objects. I've played with Document Raster Settings.
Truth be told, I _did_ reinstall Illustrator last year and have not used it much since.
Any insights you can share?
Thanks

Please excuse this post ... didn't mean for it to appear as a reply under another post. My apology. lk <[email protected]> wrote in message news:[email protected].. >I purchased a vector image from istockphoto ... when I opened the file in > illustrator it is just an outline without color. I select the outlines > but > can't fill it with color! What am I missing? > > > > > > <[email protected]> wrote in message > news:[email protected].. >> Win2k Pro >> 2GB Ram >> AICS 11.0.0 >> >> This is odd: the blur control in the Drop Shadow Effect and Filter dialog >> boxes is disabled. It seems to me there was a time it was ENabled. >> >> This is the situation for both vector and bitmap objects. I've played >> with >> Document Raster Settings. >> >> Truth be told, I _did_ reinstall Illustrator last year and have not used >> it much since. >> >> Any insights you can share? >> >> Thanks >

SDK: Changing drop shadow effect properties

I have a text object that I've done Effect->Stylize->Drop Shadow... on.
Using the COM SDK for Illustrator CS6, as an Illustrator.TextFrame object, how can I access the properties of this drop shadow effect?

Hello again
Ahhh, okay. Gotcha!
The thing is, there is no drop shadow effect to configure. If there is such an effect, it's something that is simply part of the Text Animation that has been selected.
I think the icon is a bit misleading and is simply intended convey it's not just regular text. I don't believe the intent was to convey there is a drop-shadow associated with a Text Animation. There isn't. At least not without it having been programmed as part of the animation.
Does this help you answer the question? Are you actually seeing there is a drop-shadow effect during playback that you don't like or want? If so, you will likely need to choose a different Text Animation.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Transparency - Drop Shadow Effect

I'm operating Photoshop 7.0.1 on Windows XT.
I can't seem to figure out how to preserve the transparency in a picture when I add a drop shadow effect.
1. Increased the canvas size to allow for the drop shadow
2. Selected and cut the extended canvas area (to be transparent)
3. Selected the image and created a new layer
4. Added the drop shadow effect to the image layer
5. At this point the image appears to have a drop shadow on a transparent canvas; but that is not the case.
I'll be placing the graphic in Pagemaker. Any tips would be appreciated!
Deb

In order for Pagemaker 7 to simulate transparency, you need to save
your image in Photoshop with a clipping path.
This means that you need to select the part of the image you want to see using the selection or pen tools, and then define the selection
as a clipping path.
Assuming you have an image ready to be saved for Pagemaker, try the
following procedure.
Select the part of the image you want to see in Pagemaker.
Open the Paths pallet and select "Make Work Path" from the pallet menu.
Open the Paths menu again and this time select "Save Path".
Go to the Paths menu again and this time select "Clipping Path" from the pallet menu. When asked, select the name of the Path you had previously saved.
Save the image as a Tiff file.
Now when you place the image on a coloured or textured background in
Pagemaker, it should only display the part of the image you selected in Photoshop. The clipping path you created in Photoshop will hide the unwanted background of the image.
Hope this helps

How do I include a drop shadow effect when I import an Illustrator vector into Edge Animate?

How do I include a drop shadow effect when I import an Illustrator vector into Edge Animate? It should be noted that I also have another effect (an extrude & bevel) applied which does copy over when I paste (or create an SVG and import) into Edge Animate. Any thoughts on why the drop shadow disappears but the extrude & bevel carries over?

Which version of Illustrator are you using?
In earlier versions of Illustrator it is not that easy to apply drop shadows with spot colours.
Another reason why it's always important to tell which version of AI … well …

How to achieve this specific drop shadow effect?

Dear all,
Does anybody know how to achieve this specific drop shadow effect in InDesign: a step by step instruction, a plugin, etc?
Regards,
Kasyan

Kasyan,
I generally just use the basic feather. I draw the object with a few clicks of the pen, fill with whatever color, set the tint if desired, then use settings more or less as below.
Mike

How to place multiple images in batch with drop shadow effects on room backgrounds at the same position?

I want to place multiple images of hand paintings with drop shadow effects on room backgrounds to make them look as if the paintings are hanged on the room walls. I know how to do it one by one, but that takes time and I want to do it in batch at once.
I am quite a beginner for adobe photoshop CS6. I belive such an automated task is possible through 'Automated Batch' function and/or 'Create Droplet' function. Kindly share your expert opinion.

If you want to go with Batch I would recommend creating an Action of more or less these steps:
• set the resolution to the same as the background image’s
• change the image from Background Layer to regular Layer if necessary
• convert it to a Smart Object
• add a Drop Shadow Layer Style to the image (do not use Global Angle)
• place the background image (File > Place …)
• move it behind the image layer
• Image > Reveal All
• make Selection from that layer’s transparency (cmd-click its icon in the Layers Panel) and use Image > Crop
• select and transform the image layer to fit the intended position
This would naturally work out best if the images had the same size and proportions.
For the reflection on the floor duplicate the image, flip it vertically, move it in position and reduce its opacity to maybe 10%.
Realistically you may have to hide it partially behind the pillows, a Vector Mask would be an option.

How to place multiple images of hand paintings with drop shadow effects on room backgrounds?

I want to place multiple images of hand paintings with drop shadow effects on room backgrounds to make them look as if the paintings are hanged on the room walls. I know how to do it one by one, but that takes time and I want to do it in batch at once.
I am quite a beginner for adobe photoshop CS6. I belive such an automated task is possible through 'Automated Batch' function and/or 'Create Droplet' function. Kindly share your expert opinion.

If you want to go with Batch I would recommend creating an Action of more or less these steps:
• set the resolution to the same as the background image’s
• change the image from Background Layer to regular Layer if necessary
• convert it to a Smart Object
• add a Drop Shadow Layer Style to the image (do not use Global Angle)
• place the background image (File > Place …)
• move it behind the image layer
• Image > Reveal All
• make Selection from that layer’s transparency (cmd-click its icon in the Layers Panel) and use Image > Crop
• select and transform the image layer to fit the intended position
This would naturally work out best if the images had the same size and proportions.
For the reflection on the floor duplicate the image, flip it vertically, move it in position and reduce its opacity to maybe 10%.
Realistically you may have to hide it partially behind the pillows, a Vector Mask would be an option.

Muse: the latest version is not allowing the drop shadow effect to apply to text

The latest version of Muse is not allowing the drop shadow effect to apply to your text. It will apply to shapes but not the text. Anyone know what has happened or how to fix it.
Thank you very much.

Please use a System font for the text and not a webfont or websafe font. Also make sure that that the textframe fill is transparent.
Please refer:

Anti-Aliasing for the DHTML Drop Shadow Effect

Has anyone found a way to clean up the lines on the DHTML
drop shadow effect? Any help would be much appreciated.
Thanks!

Anyone else experience this, or have any suggestions.
CS6 16.04, Mac 10.8.5

My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.

My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.

Something else you can try.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Restart and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

Remote app - constantly reconnecting, can't get it to stop

Any ideas?
I took the Remote app for a dry run, and everything worked fine - I really like it.
Next, I bought an Airport Express. I'm still working out problems, but that's another post in another area...
The problem now is, I can get iTunes playing through the AE to my stereo, but the Remote app is constantly reconnecting to iTunes. I can't get it to stop this procedure.
I hear music, and in the half second between reconnects, I can use the Remote app to advance to the next song. It reconnects all the time, though, every 5 seconds maybe, making browsing through playlists or albums impossible.
Also, I've tried the "Stay Connected" both on and off, but neither makes any difference.
Any ideas why this is happening?
Thanks,
-Trevor
Message was edited by: tch_popeye

Well - after reading through the abundant suggestions... not...
I've ditched the ad hoc network treatment, and switched to a wireless access point for my airport express. So far (this afternoon only), I am no longer having this problem.
I'll mark the question answered.
-Trev

I mistakenly asked iTunes to download a TV series and I can't get it to stop trying to download it. how do I kill the download?

I mistakenly asked iTunes to download a TV series and I can't get it to stop trying to download it. how do I kill the download?

You've got to be freakin' kidding me. I'm in Brazil, I accidentally started a 2.2GB download that it says will take 592 minutes to download, and there's no way I can stop it and download something else until that first download finishes? I would have thought it was unthinkable 15 years ago that anyone would build an app that downloads things but doesn't allow the option of canceling the download, but in this day and age? So much for Apple making intuitive, user-friendly products.

Drop shadow effect--I can't get it to stop!

Similar Messages

Maybe you are looking for