Drop shadow is not exported in pdf when used in a symbol

When I apply the effect "drop shadow" on an object and export to pdf it works fine. When I then convert the object into a symbol and export to pdf, the effect is gone.
Suggestiones other than "don't use symbols" ???

No, I can't reproduce the Preview issue.
Maybe it is caused by other options in your file.
Anyway: Preview is in no way suitable to pre check files for printing.

Similar Messages

Document Language not exported into PDF when viewed in Acrobat Pro 9?

I've been working on making our PDFs accessible, but it looks like the LiveCycle-generated forms are causing some issues. While I can set the Form Locale in LiveCycle ES (8.2.1), generating a PDF from this and viewing it in Acrobat Pro 9 leaves the Reading Language field greyed out. I'm new to LiveCycle, so it might be something simple (but I've tried Googling everything).
I've tried saving it as both a Static PDF and Dynamic XML PDF form without luck. The Generate Accessibility Information Save Option is checked. I am doing a Save As rather than in-app generation (I understand this can be the cause of some issues).
Help!?

Unfortunately, as I mentioned in my original post, I've already tried toggling smoothing options. They don't make the jagged edges go away—they just change them slightly. In some cases, as with the sample file provided, it does help smooth the art out, but it never looks as good as it did going in, in a recent project, toggling smoothing options didn't affect the appearance of the image at all. Zoom does not appear to relieve the artifacting.
A little clarification: this PDF was created from a flat PNG, but I have had this issue with PNGs and TIFFs as well, generated by both Photoshop and Illustrator. To reiterate, the PDFs display fine in other software—Finder preview looks great, and the same file viewed in my browser via Google Drive looks as intended as well. A colleague was able to replicate this issue in Acrobat on his Windows machine. This appears to be a rendering issue specific to Acrobat with regards to the files I use it to create.

Keynote symbols not exporting to PDF

How do I make Keynote export % symbols to a PDF? For some reason it is not exporting. I tried using multiple fonts. I was pretty surprised to see that Keynote was leaving characters off of exports. Usually Apple is pretty good about accuracy.
Yosemite OS 10.10.2
Keynote 6.5.2 (2119)
Macbook Pro 15 Retina
Fonts tried: Helvetica, Futura Std
Could not export % symbols adjacent to numbers

Sorry. my bad on version numbers. The latest patch for CS4 is 6.0.6, but you might want to stop at 6.0.5 if you have file with imported Illustrator graphics because, if memory serves, the 6.0.6 patch changes the way they are scaled on relink.
Do you actually have an InDesign Document open when you go to File > Export...? I presume the answer is yes or the command would not be active.
When the export dialog opens you should see a standard file save dialog with a large area that shows folders and files, and two fields below where you can enter a name and choose a file type to export. What do you see in the file type field? If it isn't PDF, can you click the arrow on the end and choose Adobe PDF?
What is showing in the name field? Are you able to enter a new name of your choice?
I suspect that at some point you may have changed the name of the PDF you exported from the file (the default is to use the same file name, but you can enter anything you like), then saved the .indd file after doin the export. When you do this you embed the new PDF file name into the file and it will always be selected the next time you try to export. If I recall correctly, exporting to .idml or .inx, then opeing that and resaving as a new .indd should clear that, and simply changing the name for the export to match the filename of the docuemtn may work as well.

Bleeding background shape will not export to PDF

Hello everyone,
I am working in InDesign v. 7.0.3 and when I set a rectangle to bleed on all sides it will not export to PDF (using Adobe Acrobat Pro, v. 9.4.2) . That being said, shapes and text within the page all show up. Does anyone have any suggestions that might solve this very annoying mystery?
Thank you in advance for your help!
P.S. I should add that the save dialog box presents a desktop icon that does show the complete file.

No background at all? not just bleed not showing?
If it's restricted to this file, try Remove minor corruption by exporting
If it's all files, Replace Your Preferences

I can not export a PDF to word. What should I do?

I can not export a PDF to word. What should I do? Do I have to cancel my subscription? Please answer me.!!
I already paid all!

Hi wishborne,
I'm here to help! Are you unable to log in to ExportPDF, or unable to convert files once you're logged in? I tried to check your order history, but don't see any orders under the email address that you use here. Did you perhaps sign up using a different email address, or sign up via Adobe Reader?
I look forward to hearing back from you. We will get to the bottom of this.
Best,
Sara

Error: The chosen certificate was not exported and cannot be used for SSL

Hello there,
when I try to configure the profilemanager in OS X Server and it comes to choose a certificate i get the following message:
The chosen certificate cannot be used.
The chosen certificate was not exported and cannot be used for SSL.
I chose our Wildcard certificate we received from Thawte.
It is completely imported in the Keychain from the Mac.
(Sorry if any sentence is wrong, I translated it from german to english)
Best regards,
Christoph

Is this a regular web ssl cert or a code signing cert?

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

Dansyacht wrote:
If the previous Safari suggestion doesn't work try the following:
In Finder, go to Macintosh HD/Library/Internet Plug-ins and move AdobePDFViewerNPAPI.plugin to the Disabled Plug-ins Folder. Restart Safari. If this works you may just want to delete that FUBAR plug-in.
Thanks. This was the solution for me.
Message was edited by: tvdowntown

Can Data Be Written To A Called PDF When Using Adobe Reader 9?

Can data be written and saved to another called pdf when using Adobe READER 9?

You'll have to expand on your description for a full answer - but all things considered, it would be possible.
If the "called" (this is one of the things you need to clarify - do you mean a PDF opened via the JavaScript openDoc method?) PDF discloses itself, then the "calling" PDF can execute an importXFDF or similar call on that PDF as long as they are Reader Extended.
Past that, you'll need to give us more information on exactly what you're trying to do.

HT2188 I can hear caller but they can not hear me except when using speaker phone

I can hear caller but they can not hear me except when using speaker phone

First of all, make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
One other problem could be your microphone. Does it work for anything else other than a call?
Good-Luck!
kpower28
Please mark this as "solved my problem" or "helped me"!

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Slow interface when using 9-slice symbols?

Hi,
Just wondering if anyone else experiences really poor performance within the Flash application when using 9-slice symbols?
I'm using a Quad Core 9300 with 4GB ram, 512mb 780GTX, Windows Vista (32bit) and CS4 with dual 24" screens. I have noticed it's slightly better in CS5 with Windows 7 but still experiences similar problems.
I am wondering if maybe it's related to the dual screen setup. I will try disabling one next.
By slow interface, I mean clicking on a symbol might take 4-5 seconds to register. Double clicking it, another 4-5 seconds, moving it a single pixel, 4-5 seconds etc. It gets worse the more symbols there are on the stage. Hide the layer with them on it and it runs fine.
I've tried using XP compatability mode, disabling windows aero all with no success.
I'd be very interested to hear if other people have this issue and if anyone has a solution!
Cheers,
Joolz

Hi,
Just wondering if anyone else experiences really poor performance within the Flash application when using 9-slice symbols?
I'm using a Quad Core 9300 with 4GB ram, 512mb 780GTX, Windows Vista (32bit) and CS4 with dual 24" screens. I have noticed it's slightly better in CS5 with Windows 7 but still experiences similar problems.
I am wondering if maybe it's related to the dual screen setup. I will try disabling one next.
By slow interface, I mean clicking on a symbol might take 4-5 seconds to register. Double clicking it, another 4-5 seconds, moving it a single pixel, 4-5 seconds etc. It gets worse the more symbols there are on the stage. Hide the layer with them on it and it runs fine.
I've tried using XP compatability mode, disabling windows aero all with no success.
I'd be very interested to hear if other people have this issue and if anyone has a solution!
Cheers,
Joolz

Header items not exporting to PDF in CS4

I am creating a checklist in In-design to be exported to a PDF for use on an IPAD. I have created a group of four boxes that I have made into buttons that are linked to individual pages to act as a navigation bar. This nav bar are on the top of each master page. The nav bar shows up throughout all the pages in In-design, however when I try exporting it the nav bar does not show up in PDFs. I have tried a number of fixes: shrink the nav bar to ensure it does not overlap the page edge, dropped it down so it is not near the top of the page, moved it to an upper layer. Nothing has worked. At this point I have determined my 11 page checklist does not need a navigation bar but I am wanting to solve this for future larger checklists.

This can be achievable using the DPS tools. Multi-stated Objects may be helpful in this case. Try reading this article: http://blogs.adobe.com/vikrant/2011/03/multi-state-objects-in-interactive-pdfs/ and for detailed button creation, please refer to this help doc: http://helpx.adobe.com/indesign/using/interactivity-5.html.
Alternatively, to ease your task, you may try Adobe Muse where you can easily create website and drag-drop navigation bar for all your pages.

Program crashes when I try to export to pdf file using CR for VS2010

I'm using VS2010, framework 4.0. I can view, print, and export the report to excel. When I click export, select pdf, enter a file name, and click save...I get the following message:
Value cannot be null.
Parameter name: window
I added Ludek's code to limit exports to pdf and excel to my JPTreportView.xaml.vb file:
Public Class JPTReportView
        Private Sub UserControl_Loaded(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs) Handles MyBase.Loaded
            reportViewer.ViewerCore.ReportSource = Me.DataContext.ReportSource
            reportViewer.ViewerCore.ToggleGroupTree = False
            reportViewer.ViewerCore.ToggleParameterPanel = False
            reportViewer.ViewerCore.ToggleSidePanel = False
            Dim exportFlags = (CrystalDecisions.Shared.ViewerExportFormats.PdfFormat Or CrystalDecisions.Shared.ViewerExportFormats.ExcelFormat)
            reportViewer.ViewerCore.AllowedExportFormats = exportFlags
        End Sub
    End Class

My parameters are set in the code and are set to "Do not show" in the report. The pdf export did not work before I added the code to limit the export options. The code in JptReportView.xaml:
<UserControl xmlns:my="clr-namespace:SAPBusinessObjects.WPF.Viewer;assembly=SAPBusinessObjects.WPF.Viewer"
             x:Class="View.JPTReportView"
             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
             xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
             mc:Ignorable="d"
             d:DesignHeight="300" d:DesignWidth="300">
    <my:CrystalReportsViewer Name="reportViewer" ShowOpenFileButton="False" ShowToggleSidePanelButton="False"     ShowRefreshButton="False" ShowLogo="False" Focusable="True" />
</UserControl>

Drop shadow is not exported in pdf when used in a symbol

Similar Messages

Maybe you are looking for