Drop zone of loop in the film stip template, works in simultor, not burning

Droping a loop from the film into the drop some in a chapter menu and it shows up on the simulator. when I go to burn or build etc there is just white where the loop should be. everything else is workinng fine just but no loop- any ideas out there?
thnx

OK bigger problem- the all NTSC DVD that used the same template [film strip] also had no problem in the simulator, but I just build/formated it, and the drop zones in the menu buttons whent all white again- same as yesterday. I also checked and they were all software based in the menu prefs. something is wrong here, there is like a "flash frame" of the first frame of the loop, frozen for a split second. and then when the motion starts it all goes to white in zone. I am really flumixed here, did I change something in the targets or is it still burn realted? but why does it work in the simulator, like a charm and then it does not burn????? FRUSTRATED

Similar Messages

Upgrade to Final Cut 10.0.7 destroyed my generators created in Motion that include drop zones. Anyone experienced the same problem ?

In Motion 5 I created generators that included a drop zone. The objective it to bring them into Final Cut and insert into the drop zone a clip of the same duration.
In FCX 10.0.6 I used to bring a clip to the time line and re size it to the exact duration of my generator. Then I bring the generator to the time line and selected the generator, click in the drop zone of the published parameters menu and select this clip I wanted to insert. The result was the generator using my clip and the clip playing during all the duration of the generator with the generator effect.
Now, with 10.0.7 I can’t make that work. When I click in the clip I would like to import into the drop zone, the result is that there’s just a frozen image of the clip (in the same place I clicked with the mouse)
Is this a known problem of 10.0.7. It used to work well in 10.0.6
Thanks for your help !

I can't see that the update would have any effect on custom generators as they are housed separately from FCP X.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

I dropped my iPhone 4s and the back cracked and it now will not turn on. I was wondering if anyone could give me an estimated price to fix it. Thanks. And I do have insurance on it with best buy. I'm with Verizon so I don't know what way would be cheaper

I dropped my iPhone 4s and the back cracked and it now will not turn on. I was wondering if anyone could give me an estimated price to fix it. And I do have insurance on it with best buy. I'm on Verizon's phone plan so I don't know if it would be cheaper to have it fixed with Best Buy or Verizon. I cracked my iPod a little bit ago and got a refurbished one for free with the insurance on it but I don't now if it would be different because it is a phone. I don't know really anything about this stuff so any information that could possibly help me is greatly appreciated. Thanks.

That's only for the iPhone 5. On the 4 and 4S, they can repair the back glass in store for $30. They will not replace the display on a 4 or 4S. They must replace the entire phone. Replacing the display on them requires disassembling the entire phone, which they will not do in store.

Firefox shut down & updated in the middle of my work; I could not restore my session; you have literally cost me my job and future.

Firefox shut down & updated in the middle of my work; I could not restore my session; you have literally cost me my job and future if this cannot be fixed. I don't understand why it updated without me prompting it to. It also never ask to report a crash.
I went to play a youtube video, my entire screen flashed, when the screen came back, the youtube video screen was green. I refreshed the page and my system stopped- a blue screen appeared and something about verifying disk or something. My system the restarted, and when I opened firefox, it first said preparing updates and when it did finally open, the new updated version, of course, I could not restore my previous session.

You can check in the Firefox profile folder to see if there are numbered sessionstore-##.js present.<br />
The sessionstore.bak file could also have a previous session.
*http://kb.mozillazine.org/Session_Restore
You can also try to restore a previous copy of the sessionstore.js file if there is one present that could contain that lost session.
*Right-click: Properties > Previous Versions
*http://windows.microsoft.com/en-US/windows7/Previous-versions-of-files-frequently-asked-questions
Be sure to make a backup copy of all sessionstore files before making changes.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

The type of the database table and work area are not Unicode convertible

***Data declaration
TYPES : BEGIN OF t_zle_lagerplanung,
                   SEl, "stores which row user has selected
                   kdauf TYPE zle_lagerplanung-kdauf,
                   kdpos TYPE zle_lagerplanung-kdpos,
                   etenr TYPE zle_lagerplanung-etenr,
                   papiermaschine TYPE zle_lagerplanung-papiermaschine,
                   runnr TYPE zle_lagerplanung-runnr,
                   prio TYPE zle_lagerplanung-prio,
                   werk TYPE zle_lagerplanung-werk,
                   durchmesser TYPE zle_lagerplanung-durchmesser,
                   breite TYPE zle_lagerplanung-breite,
                   anzle TYPE zle_lagerplanung-anzle,
                   lgpla TYPE zle_lagerplanung-lgpla,
                   lgtyp TYPE zle_lagerplanung-lgtyp,
                   art TYPE zle_lagerplanung-art,
                   anzhoehe TYPE zle_lagerplanung-anzle,
                   fa TYPE zle_lagerplanung-fa,
END OF t_zle_lagerplanung.
DATA : it_zle_lagerplanung TYPE STANDARD TABLE OF t_zle_lagerplanung INITIAL SIZE 0,
            wa_zle_lagerplanung TYPE t_zle_lagerplanung.
Here I am getting the data in internal table by using thiis select statement.
SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
              anzle lgpla lgtyp art anzhoehe fa
FROM    zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
WHERE kdauf IN s_kdauf
AND       KDPOS IN s_kdpos
AND      werk = p_werks.
But while updating the particular field in zle_lagerplanung using this statement
UPDATE zle_lagerplanung from table it_zle_lagerplanung.
it is giving syntax error
"The type of the database table and work area (or internal table)
"IT_ZLE_LAGERPLANUNG" are not Unicode convertible. "
Could any one help me out how to resolve this problem....
Thanks in advance

Dear Shayamal,
XXX....are not Unicode convertible
This error comes while inserting or updating database and the fields are not matching between data base table and structure .
Check you fields of data base table and "zle_lagerplanung" and struture "it_zle_lagerplanung" . There fields must match.
thanks and regrds,
Anup Banerjee

When I try to burn a play list to a CD some of the songs are grayed out and then not burned to the disc. How can I fix this problem?

why are some of the songs on the play list I am trying to burn to a CD "grayed out" when I start burning the CD and there for not included in the finished CD? How can I fix this problem. Btw, I have been using iTunes for years and this problem just came up quite recently. Thanks

Howdy sarthur,
Thanks for using the Apple Support Communities.
To help resolve this issue where you're unable to burn a disc successfully in iTunes, please follow the troubleshooting in the article linked to below.
Can't burn a CD in iTunes for Windows - Apple Support
Take care,
Alex H.

In a loop if the value is negative then we should not add in the total

Hi in this we r getting the negative value in Po also if we find the negative value we should add that value in total
public BigDecimal getAvailableCreditAmount() throws EleseException {
Money total = Money.ZERO();
Iterator poIter = getAllPurchaseOrders().iterator();
while (poIter.hasNext()) {
PurchaseOrder po = (PurchaseOrder) poIter.next();
if (po.isActive() || po.isPending()
|| (po.isInactive() && po.isReasonCompleted()) ) {
//changed from getTotal() to getNonDocumentedTotal()--Sreeni
total.add(po.getNonDocumentedTotal());
//total.add(po.getTotal());
return getApprovedCreditAmount().subtract(total.toBigDecimal());
}

In the iterator which I have send earlier I am getting the Total , total.add(po.getNonDocumentedTotal()); I mean I am getting th etotal sum of the Po values in that . For some value the PO value may be negative and when I find out the totaol amount then it will be increased because of the negative value In the following iterator if the value of po value is negative we should add in the total and we should not take that value in consideration . I appreciate your time
public BigDecimal getAvailableCreditAmount() throws EleseException {
Money total = Money.ZERO();
Iterator poIter = getAllPurchaseOrders().iterator();
while (poIter.hasNext()) {
PurchaseOrder po = (PurchaseOrder) poIter.next();
if (po.isActive() || po.isPending()
|| (po.isInactive() && po.isReasonCompleted()) ) {
//changed from getTotal() to getNonDocumentedTotal()--Sreeni
total.add(po.getNonDocumentedTotal());
//total.add(po.getTotal());
return getApprovedCreditAmount().subtract(total.toBigDecimal());
}

I dropped my iphone 5c and the screen won't work, but I can still feel it vibrate. Any help??

I've tried holding both buttons and plugging it into computer for a reset, neither have worked.

most likely needs hardware repair. hope you had apple care +
$269 lesson if you didnt + shipping and taxs
Peace, Clyde

I am trying to burn a DVD from an iphoto album, I placed it in the order I want , but it does not burn in that order, and has picked up other photos not in the album

I have created an album of phots, moved into order I want to burn, cd and dvd. It burned out of order in album and also added pictures not in Album highlighted to burn. Also was hard to view all pictures and move more quickly into order to view. I am use to using powerpoint and shows all slides at 1 time small thumnails so easy to move

Re the order on the DIsk:
When you export from iphoto you are in the Finder and that doesn't have the same sorting options as iPhoto. There is no "manual" sorting in the Finder, for instance.
Here's one (of several) way(s) to do what you want:
Make an Album of the photos, then drag the pics into your preferred order.
Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.
Burn that to the disk.
I'm sorry but I haven't a clue what the rest of your query is about.
Regards
TD

Photoshop cs6, how to apply an effect to just the layer you are working on, and not the ones underneath please

I was shown how to do the above earlier this year but cannot find my written reference to it, nor can i find the answer on adobe help site. can someone answer this for me. I know it a couple of quick keys, but don't know which ones, and something to do with where you click within the layer box (then drag). look forward to the answer!

Yeah, there are few type of effects from adjustment layers that csuebele mentioned to layer styles. The styles can be applied to each layer by double clicking on the layer to bring up the editor. Since you mentioned dragging, I would assume copying or moving to a different layer. Drag the head style name between layers to move them and hold down the alt or opt key while dragging to make a copy.
If you convert the layer to a smart object, then each layer that has been converted can also have editable filters as well.

TS1436 I've now wasted 4 hours of my life trying to burn Audio CDs from iTunes. I can burn from other programs but not iTunes. It pretends it's doing it but when it's finished the disk is blank. It's not burned a thing.

I've also tried different speeds. The CD-R says x52 but I've tried different speeds but that makes no difference.

I know I'm a mug but I was in a mood where I didn't want to be beaten and read all these tips on line and none of them worked. I've given up now as it's 1AM my time.
Yes it seems most of my songs only iTunes handles. I've tried opening them in Media Player and burning an audio CD from there but there's only a very small selection of my albums/songs and just my luck very few of those I'm trying to burn.

Does the playbook have a working GPS or not ?

Some reviews say it does. But when I am outside of WiFi range (don't have another BB device) it does not seem to connect.
Or is the hardware in place but the OS does still not have the required code ?
Asked the question via the BB incident support but got no answer. Guess they are swamped. :-(
Thanks

BrzI wrote:
Some reviews say it does. But when I am outside of WiFi range (don't have another BB device) it does not seem to connect.
Or is the hardware in place but the OS does still not have the required code ?
Asked the question via the BB incident support but got no answer. Guess they are swamped. :-(
Thanks
Yes it has a working GPS. But...not all applications can work with it yet. That said (and there have been a few posts on this subject) Bing Maps and Poynt work, at least for me!
When you're out of WiFi coverage those applications won't work since they need data to display their maps and other information. Poynt is working on an update which will be released soon which will allow your PlayBook to leverage on the BlackBerry Bridge application to provide for data when out of WiFi coverage.
/Eric

I don't understand how the drop zone works in Title effects.

I am having trouble understanding how the drop zone in the "Keynote" title effect works. I added the title effect to my storyline. In the inspector, Title tab, I selected the clip in the Event library, in this case a tiff photo. The thumbnail and clip title display in the inspector, but the clip does not display in the Viewer when I play the storyline even after FCPX has rendered.
Am I missing something in my understanding of this title effect or is there a problem in FCPX (10.0.6)? Any ideas or suggestions would be appreciated.
iMac, 3.4GHz Core i7, 16GB ram, OSX 10.8.2,

There are two ways in which drop zones are available in the Keynote title template. What Luis has shown you is the normal way in which a title placed over a clip shows you the original clip with the title text. That is called a Final Cut placeholder type of drop zone. Keynote also offers a drop zone to be used as a background choice instead of a gradient or solid as you see in Luis's post. This makes a very nice title effect as you can use any clip for that background. That is what I thought you were refering to when you you said drop zone. Keynote is one of the nicer titles we have available in FCP because of this feature. Glad you got it sorted out.

Why all pictures don't show up in the drop zones?

If I import, for example, 4 pictures in a theme that has three drop zones, only one or two pictures will show up when the loop plays and not in the order I have arranged them in the drop zones. Is there a way to sequence through all 4 pictures in each drop zone? Can for instance the loop be made longer than, in my case 0.28 min (5.0 "Memories" theme)?
Thanks in advance for any suggestion.
Frank Secco
iMac G5 Mac OS X (10.4.5) PowerMac G4

Len,
What you mean by "You can only load the same number of images into the number of drop zones and expect the theme to function properly."?
Do you mean that I must have the same number of images, (for example 4) for each drop zone? Or,maybe, one image in drop zone 1, 2 images in drop zone 2 etc. for the drop zones to work properly?
Frank

IDVD 6 Sliders at the top of Drop Zones

Hi There,
I have created a dvd with the white reflections theme, I used autofill for the drop zones, and it took the main movie file and loops separate segements of th e movie, but I want to change the segment shown and the sliders aren't responding.. if I move them they revert back to their original position
Any Ideas on this?
regards
Chris
G4 Powerbook Mac OS X (10.4.6)

Hi Chris,
Welcome to iDVD Discussions.
Just a guess: It may be that the "auto" option "killed" your control...

Drop zone of loop in the film stip template, works in simultor, not burning

Similar Messages

Maybe you are looking for