Drop zone Q

anyway possible to put text on a drop zone?

You might consider creating your text in PS, and importing it as an asset

Similar Messages

How to add more drop zones or movies in an idvd menu

I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
I tried different templates but I could find none that had more than 12 drop zones.
Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
I tried a few other templates and could not get it to accept more.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
Thanks for any advice.

I couldn't figure out how to add more drop zones
Sorry, the templates 'are what they are'.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
You need to figure out how to work with what is available.
If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

Not able to Render more than two asset type in a drop zone on page

Hi All,
I have created two different assets by making two different flex family.
I need to render these two assets in a single drop zone on a page.
Can some one tell me how is it possible to make a drop zone on page which will be able to take two different type of assets because while creating Page attribute when i select page attribute of type asset there is no option through which i can select more than two asset types.
Thanks & regards,
Ankur Bhatia

Hi Rodney,
Thanks for ur Reply.
While creating page attribute on admin site,when we select attribute type as "asset" a dropdown list comes just below through which we can select only a single asset.
how to use a list option here or how can we create it so that it can be used with various asset types.
Also in avisports site there is no drop zone which can contain more than one asset of different type.
The Drop zone contains here all the assets of same type.
Thanks and Regards
Ankur Bhatia

Photos won't drop on Drop zones

Photos won't drop on drop zones anymore. I can see the photos in the media browser, but they won't drop where I send them. I had to re-organize my iphoto library a bit, but all the photos are seen and work fine in iphoto, just won't drop into drop zones in idvd 6. A very few photos will work. Is there some re-initializing the library I need to do or something?

see this
http://support.apple.com/kb/HT4083
Peace, Clyde

Drop zone of loop in the film stip template, works in simultor, not burning

Droping a loop from the film into the drop some in a chapter menu and it shows up on the simulator. when I go to burn or build etc there is just white where the loop should be. everything else is workinng fine just but no loop- any ideas out there?
thnx

OK bigger problem- the all NTSC DVD that used the same template [film strip] also had no problem in the simulator, but I just build/formated it, and the drop zones in the menu buttons whent all white again- same as yesterday. I also checked and they were all software based in the menu prefs. something is wrong here, there is like a "flash frame" of the first frame of the loop, frozen for a split second. and then when the motion starts it all goes to white in zone. I am really flumixed here, did I change something in the targets or is it still burn realted? but why does it work in the simulator, like a charm and then it does not burn????? FRUSTRATED

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

Images too large for Drop zone in Template

Is there a way I can resize images I want to use after I drop it in a drop zone? For some reason, all my images are too large for the drop zones - even after making smaller in photoshop.
Thanks!

I'm fairly new to DVD SP too and wondering the same thing.
Shouldn't we be able to edit the image mask?
It's kinda worthless to just accept what DVDSP decides to do with the photo.

I've encountered problems with drop zones in generators from Motion 5 toFCP X 10.0.7.

The clips won't import properly and come up as stills rather than videos. In one of my generators (with three drop zones) only one will display the clip - the other two play as stills (frozen?). I've tried having the playhead parked at the start of the clip when adding them to the generator, but it produces the same results.
Any solutions?

I've had this too and the fix then was to delete my project render files (FCP that is).
Russ

How do you adjust the timings of a video placed in a drop zone?

Hi,
I brought a template online and have dropped a video into one of the drop zones. It plays fine, although I would like it to start in a different place and fade the sound in and out.
How do I go about doing this?
Thanks

Trim the Out point of your video so that the entire clip is not in your project (this is so you can slip the video and audio). This step may or may not be necessary if the drop zone is not the same length as your video clip.
Open the timing pane (F6). Hold down OPT while dragging the layer to slip the clip in the project. This will also slip the audio. Once you have it in the right spot, click the audio display button at the bottom of your timing pane (it looks like a little speaker). This will show you your audio track.
Select the audio layer and go to add behavior/audio/audio fade in out. In the inspector, adjust the behavior to taste.
Andy

Adding pictures to a theme, but not in the drop zones...

I don't know if this is a really noob ou really tricky question, but here it goes : )
I'd like to add a/some picture(s) to a iDVD theme, but not in the drop zones. I'd like my pictures to appear as layers, choose whoch one goes in front, and so on...
Is there any way to do that?
Thx, and happy new year ; )
iMac 24' 2,16GHz CodeDuo2 GeForce 7300 GT 1Gh DDR Mac OS X (10.4.8)

In that case you would need to prepare the background as a QT movie exactly the way you want to display it as a background movie and then drag and drop that prepared QT file to iDVD.
I've never done this type of movie in iLife apps alone but I have with FCP & DVD SP which offers these additional video editing options for sizing pip and frames in an existing movie / menu.
Also check the help Menu for iDVD6 (and iMovie) if you haven't already. I did a search for you and here's what I came up with:
Changing the background image of a DVD menu
You can replace the background image in a menu with your own image. Images in menu backgrounds are cropped to fit the standard DVD window size, but the aspect ratio of the original image is preserved. If you want your image to fit the DVD window exactly, first use an image-editing application to resize the image to 640 x 480 for standard video and 854 x 480 for widescreen.
When you replace a background image, you can also choose to keep the drop zones or remove them completely.
Here are ways to change the background image:
Drag a picture file from the Finder or the Media pane to a DVD menu background, outside a drop zone. Before you drop the picture, press the Command key and choose "Replace background" or "Replace background and drop zones" from the contextual menu that appears (shown above). Then release the mouse button.
Click the Menu button and drag a picture file from the Finder to the background well in the Menu pane. If your theme has drop zones, the drop zones disappear.
Click the Media button, then click Photos. Drag a photo from your iPhoto library or another folder to your DVD menu. If your theme has drop zones, the drop zones are retained.
Choose File > Import > Image, locate and select an image, and click Import. If your theme has drop zones, the drop zones are retained.
To remove a background image and return to the default image for the theme, click the Menu button and drag the image out of the background well (shown above).
Hope this answers your question/s.
SDMacuser

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

I think others would be able to help if you describe a little more why you'd like to do this. Given that drop zones are a way of passing images into Motion that you want to manipulate, resizing a drop zone is the equivalent of resizing the image.
If you're having a problem with an image from Final Cut being too big or too small, select the Drop Zone in the inspector and make sure the Fit parameter is set to 'Fit' - 'Center' will result in images dropped not being scaled to fit the Drop Zone. 'Stretch' will force the dropped image to fill the space defined by the drop zone,
If the image is already cropped and scaled up in Final Cut Pro, that is the information that Motion gets - you can't scale down the image to see more of the edges that have been cropped off.
If you want more than one copy of the image passed via the drop zone, use Make Clone Layer from the Object menu.

How do you resize a photo in an iDVD drop zone?

The themes in iDVD are virtually useless if you can't easily drag a photo into a drop zone and move and resize as necessary. Using the method described in iDVD is ridiculously cumbersome but what's worse is that it doesn't work.
Does anyone have a suggestion for making this task easier? Does anyone know of better software that would replace iDVD?
This problem has been around for years. It's unbelievable that Apple allows the problem to continue.
Thanks for any help.

Thanks for the reply - I've just gotten around to playing with this some more and as you mentioned, I'm now creating a new image in Photoshop that repositions the image so that it places well in the iDVD template (soft frame in this case). Extra work, and it appears to be effective in the iDVD interface, but when I burned a test DVD the images were scaled differently in the final render to disk.
I'm not trying to do anything out of the ordinary here - just want to burn a DVD of my baby boy for the grandparents. This is precisely the type of use iLife is aimed at... But something as simple as putting a picture of my son on the DVD menu took the extra step of composing in Photoshop in order to have his head not cropped ridiculously. Now even that extra work is altered on the DVD.
I'm new to iDVD and might just need to work with it some more, but so far it just seems wrong and inconsistent with the rest of iLife to not have this flexibility.

How do I get pics into Drop Zones for Templates?

I am having a problem that is probably simple, but for the life of me, I can't figure it out. I opened a templated in Motion and noticed that some of the templates have drop zones, a la iDVD.
Okay, so I found some pics in the browser but when I went to drag them into the drop zone, the image did not go into into the drop zone, and instead a new layer was created. I've tried this countless times and can't seem to gt the pictures to go in the drop zones.
Am I doing anything wrong?

The problem is one of interpretation. What you are seeing are grey "replace media" items which need to be replaced with what you want. They aren't 'drop zones' ala IDVD or DVDSP (basically it's an image with a mask or overlay over it giving it that 'drop zone' look)
There are many ways of changing/replacing the "media" items (this is Apple after all ;):
1) If you press F5, you open up the "Layers/Media/Audio" window. Click "Media" and you'll see all the elements used to make up the template, including "replace 1.jpg" etc.
2)Click on one of the "replace" files. Then click the "Inspector" tab in the Browser window. Then you'll see a window that says "Linked Objects." and below that "replace media file." Click "Replace media File" and then choose the file you want to insert/replace (you'll have to de-select "Show Matching Names Only" to be able to replace it with your own file)
OR:
1) press F6 and open the Timeline window.
2) Scroll down and you will see a layer called "Replace"
3) Open up that layer (click the triangle) and you will see Replace 1, Replace 2, etc (depends on your template)
4) Drag the image you want to insert/replace into the template to the sublayer called "replace 1" etc.
There are other ways, but these two are the most 'stable' I have found.

Drop Zones in FCPX used to be videos, now show icons

I made a long video using motion transitions and build-ins with drop zones. When originally applied, you dropped them onto the timeline above the vide you wanted them to work with, and the video would play behind it with it showing through the drop zone portions. It was a very nice effect. I have to reexport my movie, and I'm now updated with FCPX 10.0.5 (I believe I lasted exported at 10.0.2 in Lion), and now the dropzones just show the downward arrow, the video won't display through.
Anyone else encouter this? Any solutions? Adding them into the dropzone frame just creates still images, which is stupid.
Any help would be greatly appreciated.
FCPX 10.0.5
ML 10.8.1

Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
http://www.digitalrebellion.com/prefman/
With Preference Manager, you can backup the Prefs when FCP X (or any of the Apple Professional Applications) are working normally. Then when either of the applications are acting strangely, Trash the Preferences, then Restore from your backups (just a mouse-click).
If you trash the prefs and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then your backups are up to date.
Doesn't fix every problem, but it fixes a lot.
Andy

Editing a picture to fit into theme drop zone

I have cropped a picture in iphoto to remove a damaged portion and to reposition the important part of the picture to show in the Memories theme in idvd but the original photo keeps appearing.
I have several questions.
Can I move a picture in the drop zone in a theme like Memories that is horizontal to better show the important part of the picture rather than the midpoint?
Why does my original photo and not the cropped photo appear in the drop zone even when the picture I see shows the cropped picture?

This is where DVDSP out performs iDvd. There is much more latitude (literally) within apple's pro apps for exactly this type of work. It is possible within iDvd also (to a marginal extent). But there's only so much i-apps will offer when compared to apple's pro apps. Hence the need for a graphics editing app (ie, PhotoShop).
It actually becomes a bit frustrating without the additional features / tools to do the work that's needed to customize your iDvd in this respect. It's almost as if one is at the mercy of the software along with it's built in limitations. It is a shortfall IMO, even though it is intended as a consumer app.

Movie Clips in Drop Zones?

I want to place movie clips into the drop zones, but cannot figure out how to do this. When I go to "Media" my movie clips are not available. The movie appears in the bottom portion of the media window, but I cannot get individual clips to put into the zone.

There's a bug in iDVD where indiviadual clips in a folder, that have other folders in with them, don't show up.
Put your clips in a folder without any other folders.
sp 1.8 GHz G5 Mac OS X (10.4.4) 3 x 300Gb Seagates, Epson 3490 scanner, Epson 830 printer

Drop zone Q

Similar Messages

Maybe you are looking for