Drop zone video playing too fast

I am building a Motion title sequence with a drop zone for video. I placed it into FCPx as a connected clip (purple timeline box), and associated the video under it to the drop zone. It all works except the video dropped in plays super fast, far out of sync with the audio below. Not sure why.
My FCPX timline, source footage and motion file are all the same frame rate, 23.98. Any ideas?

Where can you place a marker en set the project loop end. Because can place a marker and then go to edith marker. But i see no list as above?
1. Deselect any objects in the Timeline. Select Mark/Markers/Add Marker. If that menu item is not available, make sure there are not layers selected in the Layers window.
2. A timeline marker will be created at the playhead. When the playhead is on that marker, the Edit Marker menu item will become available.
3. Select Mark/Markers/Edit Marker. This brings up the dialogue where you can Name, Comment and select the marker type. Choose Project End Loop from the Type menu, then click OK.
4. Drag the Marker to the end of the timeline.
Adrie, I have not encountered your problem with freezing drop zones. In the past I have had many drop zones playing simultaneously, so it should work. If you suspect that you have a bad install, you should probably reinstall it before troubleshooting any further to eliminate that possibility. I am running a fresh install of 5 on a system that has never had 4 on it.
Where did you find that tutorial? do you have a link.
Ripple Training - Motion 5 - Rigging and Publishing

Similar Messages

Videos play too fast on ipad - sounds like super high speed mini mouse

We just bought the ipad and when we play videos on vimeo or youtube they play at an ultra high speed like the fps is messed up - it sounds like a record being played too fast
Is this our ipad or a setting - we are worried because we do not see the problem listed anywhere else.
Thanks!

Have your rebooted/restarted your iPad? you do that by pressing the Home and power/sleep button at the same time until the slider to power off the iPad appears. Slide the slider and when screen activity stops depress the two buttons again until the Apple logo appears. When the iPad completes rebooting try again to see if that solved your problem.

Microsoft 2000 OS, all videos playing too fast, what to do?

Have MS 2000 Professional OS
All online streaming videos (like youtube) playing too fast, extremely annoying rushing "chipmunk" effect.

Word is getting around on the internet that Apple has basically stopped monitoring and moderating these forums. Expect to see this sort of thing increasing. If Apple isn't going to keep a lid on trolling like this then they had better just shut the forums down. It won't take long for these forums to be totally overrun by Mac bashers, trolls, and Windows fanboys. There's something about the Mac that scares them and makes them feel insecure.

Video playing too fast

Don't know if anyone else has this problem but for some reason I was and I seemed to find a weird work around. I had an AVI, divx codec, ac3 audio that the video was playing WAY too fast but the audio was fine. Well, seems that Quicktime is getting the frame rate screwed up and when I opened it, if I immediately to to "Movie Properties" to look at the frame rate it will play fine. If I try to play it and then look at the properties it won't play right. Almost as if it has to find out what the frame rate is at the beginning. Very weird but a bit of a work around for now. Hopefully this will be fixed. It was using Perian to play it.

I have experienced a similar quirk, with several different videos, including .m4v clips that I have downloaded or created myself. The problem doesn't occur when previewing the movies in the Finder, nor when playing them in iTunes. However, if I open the files with QuickTime, the video plays faster than normal, but the soundtrack plays at the original rate! I tried your solution of opening the Movie's Properties first, and it does seem to work. Of course, this is only a workaround for now. Obviously, something needs to be tweeked in Leopard or Quicktime —most likely both— to eliminate the quirk entirely. I am very surprised by this problem because one would think that Apple's own software products would be more compatible than third-party programs! Yow...!

AVI file video plays too fast, but audio and noted length correct

I have a one minute AVI file. Premiere correctly says the frame rate is 29.97 and it is 60 seconds long. But when placed in the time line the video plays at about 6x speed and is finished in 10 seconds. The audio keeps playing for the correct 60 seconds. I rendered it and no change. Any ideas?
Thanks - Bruce

Does Streamclip allow you to choose between Type 1 and Type 2 DV AVI? If so then you want Type 2 in your conversions.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Exporting for DVD - exported video plays too fast

Hello helpful people!
I'm fairly new to Premiere - but familiar with Final Cut. Using Adobe Premiere Pro CC v8.1 on a MAC. I have a video that was shot in 1080p, and I picked sequence settings to match (or so I think).
The video looks great in Premiere, and I need to create DVDs to send to the UK (I'm American), and they will have to be able to play in a standard dvd player over there. My understanding is that PAL would be the wiser choice for encoding. I'm trying to keep the export simple, and I've exported it multiple times using both PAL and NTSC, and while the audio files are fine - for both PAL & NTSC the video files are significantly shorter than the actual film, and plays in a sort of fast-forward effect. In Premiere, the film plays at 17 minutes, but when I open the exported .m2v files they are only playing at 14:33, - or one that I finally (somehow) got up to 15:00 minutes. That 15 minute one I got from not tweaking the settings at all - on the previous ones, I had read somewhere to increase the bit rate and use VBR Pass 2 for better results. However 2 minutes off is still a big problem.
Below are screenshots of the sequence settings, and the most basic export settings I've used - example of the NTSC.
Any help is hugely appreciated! Thanks

I personally consider QuickTime the bane of video production whose use needs to vanish from the landscape quickly and permanently. Give VLC a try instead.
VideoLAN - Official page for VLC media player, the Open Source video framework!
I say just go ahead and author the disk. Chances are good it'll work correctly.

Plug in videos playing too fast in Safari

Whether it's youtube, the Fan vids on the Comcast page, or Quicktime videos, they are all playing twice as fast as they should be, with chipmonk sound to go with it... please help.

Hello,
Go to your System Preferences/QuickTime/Streaming. Where it says: Streaming Speed click:
Automatic.
See if that helps...
Carolyn

FLV inserted to page no probs but plays too fast!

I've used the Insert Flash Video feature on dreamweaver 8 to
add a video clip to one of my family web pages
www.nzgreens.me.uk/house
It has up loaded and plays, but is far too fast.
We've moved to New Zealand and it's for our family and
friends in the UK to view. Please please please can someone tell me
why it would be playing too fast?

Green Kiwi wrote:
> Could be. I used a piece of free software from
1and1.co.uk (they host my site)
> its called Prism Video Converter. Never used it before
but was very simple. So
> simple that it never even talked about encoding.
>
> I do have flash 8, but I've only had it about a week and
don't really know
> what I'm doing. I know that it can convert video into
FLV format. Do you think
> I should try converting it through Flash 8 instead?
I think you should give it ago, the Flash Encoder is straight
forward
from what I remember.
Steve

Drop Zone Video Preview

I've gone into settings and changed the timeframe for motion but the drop zone video still plays 30 secs, but I only want it to play for 5 seconds, does anyone know what I'm missing.
Thanks

Hi
It is at least possibly to use some buttons like this - But to get this right I had to make special button movies from the big original movie.
My problem started when I used the original movie that I could not go back far enough for the last buttons and not precise enough either - so by making the small button movies I got 100% control.
Yours Bengt W

FLV sometimes plays too fast

Hi,
Can any one help how to resolve the issue some flvs play too fast but same flvs play normal most of the time. I am using NetStream class to play the flv.
here is play method I am using and link of demo and entire source.
private function play():void
if(btnPP.label == "Play"){
stream.resume();
else
stream.pause();
Please see this link : http://ec202.classicinformatics.com/demo/cropper/
Thanks in advance,
Prem

Green Kiwi wrote:
> Could be. I used a piece of free software from
1and1.co.uk (they host my site)
> its called Prism Video Converter. Never used it before
but was very simple. So
> simple that it never even talked about encoding.
>
> I do have flash 8, but I've only had it about a week and
don't really know
> what I'm doing. I know that it can convert video into
FLV format. Do you think
> I should try converting it through Flash 8 instead?
I think you should give it ago, the Flash Encoder is straight
forward
from what I remember.
Steve

FCP X / Motion 5 Drop Zone Video Freeze Frames Only!

Hmmm, well, I've followed the other discussions here regarding what appears to be an on-going issue with videos not playing (freeze frame only - usually the first frame of the clip) in a Drop Zone. I'm using the latest versions of both FCP X (10.1.1) and Motion 5 (5.1). I created a video generator in Motion with 15 drop zones for use in an open for a project I just started on. These drop zones are sliding left and right in three bands across the canvas. I can't get any of them to display moving video. I've used drop zones before and had some success with getting video clips to play in them, but in this case I'm batting zero.
Has anyone found a way around this problem? I may just import the videos into Motion and render them there since this open more than likely won't ever be used for any other project; nevertheless, I'd like to be able to use the Motion 5 template as it was designed to be used.
Thanks.

The good news, Russ, is that I've made some progress! To say that using Drop Zones can be a bit quirky is an understatement! Nevertheless, your Pro Res hint seems to have fixed my issue. I've been recutting the clips from the master archived files and saving them as Pro Res 422. The file size is considerably larger that the H.264 files, but since it works I guess I won't argue that point! :-)
I need to do a bit more investigation of this next point, but it also seems as if I need to move a frame or three into the clip before inserting it into the drop zone. I had just been taking the clip and dumping it in as is. When doing that I noticed that in some cases the clip either didn't play (freeze frame) or it started at some random (or at least what seemed to be random) location within the clip. However, since I moved the start point in 2 or 3 frames (end point doesn't seem to matter) so far, at least, the clip plays every time and starts from the proper point.
I don't know if this mattered or not, but I completely deleted the library with the project and event that I was originally trying to edit to. Since it wasn't working anyway there is nothing lost and I felt it was worth starting the project "fresh", so to speak.
So far I've only re-clipped and inserted 5 of the 15 drop zone videos but for now, at least, they are all working!
Thanks again for your help and suggestions.
John

Audio book plays too fast on the ipad - how do i fix it?

audio book plays too fast on the ipad - how do i fix it?

While I don't listen to audiobooks on myh iPad, the following might apply in your case:
When you navigate to the player controls in the iPod app, in older OS's, and perhaps still in the Music app in iOS 5, you will see a variable speed control on the right hand side of the scrubber bar. Sequential taps on that change the speeds.
This does appear in spoken content only, I think, as I see it in podcasts all the time. It's not there for video or music content, so I'd expect it to appear for Audiobooks as well.

How can I fix corrupted audiobooks category--plays too fast and is gravelly?

How can I fix corrupted audiobooks category--plays too fast and is gravelly? Other music categories are unaffected..

On the audio book (and podcast) playing screen there is a playback speed selector. It is the box on the right hand side of the screen right below the scrubber bar. It say either 1/2X, 1X or 2X, the playback speeds. Tap the box to cycle through the playback speeds.

My podcasts play too fast in my iphone

I did not had a problem before but now with the same podcasts I use to listen to they play too fast. You can still understand them but it is not pleasant at all. Does anyone has the same problem and was able to solve it?

It's likely you accidentally touched the button that speeds up playback to 1.5x.

Bounced tracks play too fast in iTunes

This is a continuation of an old thread that was never resolved:
http://discussions.apple.com/thread.jspa?threadID=853393
Basically, nothing has changed. I can bounce my tracks from Logic, and they play fine everywhere except iTunes, where they play too fast. I can play them on my iPod in the car and everything works at normal speed.
All my iTunes tracks (including the ones bounced from Logic) share the following characteristics:
192 kbps
44.1 kHz
Profile: Low Complexity
However, the Logic tracks play fast, whereas everything else plays normally.
I have a standard G5 sound card, not a 3rd party one.
I'm about to conclude that this is a standard limitation with Logic, that tracks created there cannot be listened to at regular speed in iTunes. Is that a known issue? Is this limitation by design?

Sorry for the slow reply. Yes, that is the problem I'm having, and it's so weird, I thought maybe there was some wacky glitch in the program. Logic is not without its bizarre idiosyncrasies, as you've probably noticed yourself.
Check this out for bizarre: I've bounced these tunes down to my iPod, where I can listen to them over headphones, in my car, etc, with the tracks playing at the right speed. However, if I plug that same ipod into my home stereo in the living room (where the laptop is also plugged in), and play those same tracks, they play too fast. I know, it doesn't make sense. But I'm not imagining it. It's completely crazy.
In Audio Midi Setup my audio output is set for 44.1khz.
Anyhow, the problem is less consistent these days. That is, sometimes I can bounce a track down and it plays right. Othertimes, not. I still haven't found the common denominator to this problem, but if I discover anything, I'll post it here.

Drop zone video playing too fast

Similar Messages

Maybe you are looking for