Drop Zone Video Preview

I've gone into settings and changed the timeframe for motion but the drop zone video still plays 30 secs, but I only want it to play for 5 seconds, does anyone know what I'm missing.
Thanks

Hi
It is at least possibly to use some buttons like this - But to get this right I had to make special button movies from the big original movie.
My problem started when I used the original movie that I could not go back far enough for the last buttons and not precise enough either - so by making the small button movies I got 100% control.
Yours Bengt W

Similar Messages

  • FCP X / Motion 5 Drop Zone Video Freeze Frames Only!

    Hmmm, well, I've followed the other discussions here regarding what appears to be an on-going issue with videos not playing (freeze frame only - usually the first frame of the clip) in a Drop Zone.  I'm using the latest versions of both FCP X (10.1.1) and Motion 5 (5.1).  I created a video generator in Motion with 15 drop zones for use in an open for a project I just started on.  These drop zones are sliding left and right in three bands across the canvas.  I can't get any of them to display moving video.  I've used drop zones before and had some success with getting video clips to play in them, but in this case I'm batting zero.
    Has anyone found a way around this problem?  I may just import the videos into Motion and render them there since this open more than likely won't ever be used for any other project; nevertheless, I'd like to be able to use the Motion 5 template as it was designed to be used.
    Thanks.

    The good news, Russ, is that I've made some progress!  To say that using Drop Zones can be a bit quirky is an understatement!  Nevertheless, your Pro Res hint seems to have fixed my issue.  I've been recutting the clips from the master archived files and saving them as Pro Res 422.  The file size is considerably larger that the H.264 files, but since it works I guess I won't argue that point!  :-)
    I need to do a bit more investigation of this next point, but it also seems as if I need to move a frame or three into the clip before inserting it into the drop zone.  I had just been taking the clip and dumping it in as is.  When doing that I noticed that in some cases the clip either didn't play (freeze frame) or it started at some random (or at least what seemed to be random) location within the clip.  However, since I moved the start point in 2 or 3 frames (end point doesn't seem to matter) so far, at least, the clip plays every time and starts from the proper point.
    I don't know if this mattered or not, but I completely deleted the library with the project and event that I was originally trying to edit to.  Since it wasn't working anyway there is nothing lost and I felt it was worth starting the project "fresh", so to speak.
    So far I've only re-clipped and inserted 5 of the 15 drop zone videos but for now, at least, they are all working!
    Thanks again for your help and suggestions.
    John

  • Drop zone video playing too fast

    I am building a Motion title sequence with a drop zone for video. I placed it into FCPx as a connected clip (purple timeline box), and associated the video under it to the drop zone. It all works except the video dropped in plays super fast, far out of sync with the audio below. Not sure why.
    My FCPX timline, source footage and motion file are all the same frame rate, 23.98. Any ideas?

    Where can you place a marker en set the project loop end. Because can place a marker and then go to edith marker. But i see no list as above?
    1. Deselect any objects in the Timeline. Select Mark/Markers/Add Marker. If that menu item is not available, make sure there are not layers selected in the Layers window.
    2. A timeline marker will be created at the playhead. When the playhead is on that marker, the Edit Marker menu item will become available.
    3. Select Mark/Markers/Edit Marker. This brings up the dialogue where you can Name, Comment and select the marker type. Choose Project End Loop from the Type menu, then click OK.
    4. Drag the Marker to the end of the timeline.
    Adrie, I have not encountered your problem with freezing drop zones. In the past I have had many drop zones playing simultaneously, so it should work. If you suspect that you have a bad install, you should probably reinstall it before troubleshooting any further to eliminate that possibility. I am running a fresh install of 5 on a system that has never had 4 on it.
    Where did you find that tutorial? do you have a link.
    Ripple Training - Motion 5 - Rigging and Publishing

  • Drop Zones: Video and Alpha Channels

    Is it possible to create a drop zone where the asset is a video clip that contains transparency by way of an alpha channel such that portions of the video allow for the background image to show through?
    I am familiar with setting up drop zones and custom shapes and I have used static images with transparency, but I've never done the same with video.
    I am away from my system right now or I could test this myself. Thanks in advance for the help!

    hi
    depending on how complicated your shot is, you may be able to get away with simply placing the image within the frame on top of the background shot. Then resize down to fit. You may then need to tweak its corners using the corner pin tool to get it to sit in the right perspective plane. You may find you need to soften the edges of the top layer image so its not so sharp and hard. For this you probably would need to add a mask and soften its edges. Then you might need to add some noise and/or colour correction to make it sit naturally with the background image. and finally if there are any shadows cast over the picture frame you will need to add them back over the new image. You can use a black shape, with its opacity cranked down with a blur filter on it.
    The manual describes all of these process pretty well.
    hth
    adam

  • Loss of quality in drop zone video

    I am creating a DVD project where I've created a drop zone that is approximately half the size of the screen, split vertically (446 x 480 pixels). I have a video asset I wish to use in this drop zone, but no matter how I export the video (from Motion), it loses quality in the drop zone. It is not a matter of bad compression settings. It almost appears as if the footage has been scaled up from a smaller image.
    Is there a limit to the resolution of a drop zone? If I scale down the image, the video looks crisp again... of course then my original layout is no longer intact.
    Any idea of a workaround for this? Hopefully I am not missing something obvious.
    thanks,
    ak

    You really don't have to use drop zones at all, just make everything part of the background. you might have to combine your motion workflow with some editing in FCP. I would suggest not using Uncompressed Animation, but simply using the DV-NTSC project preset.
    You have the option to either import the .motn file directly into DVDSP, exporting your motion project as a quicktime movie, or a quick edit in FCP and export as a quicktime movie. I would suggest whichever route you take, export it as a quicktime movie and use compressor to encode to MPEG2 before importing your asset into DVDSP. This will give your greater flexibilty and control on the quailty of your final video.

  • Drop Zone video is cut off

    I started using DVD Studio today with a template that has a drop Zone it appears to be cut off on the bottom third now. When I reposition the drop zone size I notice the cut off area changes in size. After two years of using this program... this is a first.

    I HAVE THE ANSWER !!!!!!! Now I'm feeling much better, but $299 lighter and 4 days that I will never get back.....
    It turns out that everyone with Final Cut Studio Pro 6 that allowed the latest update of Snow Leopard 10.6.5 to install (just a few weeks ago on Nov 10th) got their program corrupted. People with Final Cut Pro 7 already installed were safe.
    Here's the fix ....
    1. Make sure you turn off "auto updates". Reinstall Snow Leopard, you don't have to erase just use your disk.
    2. Then update manually to 10.6.4 by following these steps and downloading the update here: http://support.apple.com/kb/DL1048?viewlocale=en_US
    3. Now Reinstall Final Cut pro
    BUT Here's the rub ....
    Do not update the OS X beyond 10.6.4 until you first buy the upgrade to FCP 7
    (((big nasty grin)))
    Problem solved.
    Just remember I went to battle for you.

  • Red zones video previewing stops with audio OK

    Hi!
    The problem I actually have with premiere is the following:
    After working 1-2 days in a project, using Canon 70D´s 1080p H.264 footage, premiere stops previewing video in the timeline. Green or yellow parts are being display when scrubbing or playing, but when the playline holds the red parts, the video just freezes. The audio continues without problems. So you get a freezed frame (the last yellow frame), with the audio playing fine.
    Sometimes the playing works without problem, including red parts, being previewed smoothly, but suddenly it stops in the middle of a red section (not in the beggining of a red clip).Quitting and restarting Premiere usually solves the problem, but most of the times you get the same issue after 5-10 minutes working... sometimes even sooner.
    The clips have the magic bullet looks 2.5 effect applied, and someone also the filmconvert 2.1 effect. There is not a specific clip which is corrupted: the problem appears in any zone of the timeline. There are also some clips with Dinamic linked after effects projects (usually simple projects with masks or trakers).
    Sometimes, the clips in the bin also appear as "Missing file", but not all the times.
    When the problem occurs, both the render preview (enter key) and the export movie may not workwith premiere being blocked. But sometimes do work!
    I´ve tried to clean the database cache, with horrible results (more "missing file" problems... until I resolved it). Also tried to change the rendering method (GPU or Software only render), but the problem persists on both modes.
    This happens in all the projects (at least 4 different projects) I´m actually working with, and in 2 different machines (but with the same hardware: both are Intel I5 4670, 8Gb RAM, Asrock H87 Pro4, Windows 8.1 64 bit). Bot Premiere CC and CC 2014 have the same problem.
    Any ideas or suggestions about this? I´m desesperated!
    Cheers,
    Xabier

    The clips have the magic bullet looks 2.5 effect applied, and someone also the filmconvert 2.1 effect.
    that is probably the cause. They are cpu intensive.
    Put the effect on a adjustment layer so that you can turn them of during playback.
    Dinamic linked after effects projects
    Export from Ae with an intermediare codec. Import that into Premiere.

  • Button On Top Of Drop Zone

    i am building an menu in DVDSP, and im creating drop zones, but i want the outside to be highlighted around it. as in, i want the outer edge ring of the video to change colors as selected. so i created the button, and created the drop zone in front of it. when i go to the simulator, the button is on top, completely covering my drop zone video. is there any way to change this?
    ive already tried bringing it forward. when i make the drop zone bigger, i can see it outside of the button.

    For example: I have a movie placed in my article. And on top of the movie I want to place a button. The "mask/dummy overlay" function isn't working because the button will lose his function. Is there an other way to place a button on top of an interactive element?
    Tal

  • Control Drop Zone with Button State

    Does anyone know if you can control the display of a drop zone with the state of a button. I am working on an exercise video and would like change an image based on the selected state of three different buttons.

    Use auto actions on your buttons to jump to new (almost identical) menus with different drop zone video. Auto action can be set in the Button Property Inspector/Advanced Tab. Auto-action will automatically goto the jump target (another menu) upon selection of the button. Don't set an auto-action on the button the jumps to your desired target track.
    eg. - Create 3 menus A, B and C.
    "Menu A" should have: 1) "Button A" as the default selected button and a jump target to whatever track you want, 2) "Button B" should have auto-action that jumps to "Menu B" and 3) "Button C" should have auto-action that jumps to "Menu C".
    "Menu B" should have: 1) "Button B" as the default selected button, and a jump target to whatever track you want, 2) "Button A" should have auto-action that jumps to "Menu A" and 3) "Button C" should have auto-action that jumps to "Menu C".
    "Menu C" should have: 1) "Button C" as the default selected button, and a jump target to whatever track you want, 2) "Button A" should have auto-action that jumps to "Menu A" and 3) "Button B" should have auto-action that jumps to "Menu B".
    -k
    G5   Mac OS X (10.4.3)  
    G5   Mac OS X (10.4.3)  

  • Drop Zone referencing time code 00:00:00:00

    FCPX drop zone is referencing timecode 00:00:00:00 in my Motion template.  How can I use drop zone footage with a different timecode?

    I appreciate the post Fox and the link to your fine video on using the Comparator Generator; however, what I'm finding is that when multiple drop zones appear in a project clip they seem to reference the first drop zone.  (Your example uses only one drop zone. I've never had a problem syncing video with only one drop zone.)  My post, that I referenced above, didn't specify using this procedure, but that is exactly what I did.  Just to review a portion of that post:
    For the first test I placed each Drop Zone within one Group in Motion.  Drop Zones start at the following timecode for each location as follows:
    UL: 00:00:00:00
    LL: 00:00:10:00
    UR: 00:00:20:00
    LR: 00:00:30:00
    After publishing the project, I loaded it into FCP X.  I used the same timecode video for each Drop Zone starting it at timecode value 00:01:00:00.  Now, one would think that each drop zone window, having been placed exactly 10 seconds apart, would show timecode values for the inserted videos also each 10 seconds apart.  But they don't!  All four Drop Zones show exactly the same timecode value.  They are acting as if all four were placed within the Motion 5 timeline starting at 00:00:00:00.  But they weren't.
    I perfectly aligned the start point for each timecode clip segment for it's appropriate drop zone, (first one at 00:00:00:00; second at 00:00:10:00; third at 00:00:20:00 and fourth at 00:00:30:00) but found that FCP X ignored the clip's cursor location for all but the first drop zone.  Each of the other three referenced that first drop zone and when playing the project back, the timecode readout in each window precisely matched when they should have been 10 seconds apart.
    However, I also found that if I loaded the drop zones in reverse, starting with the last and moving to the first, using the exact same procedure, then all four drop zones synced perfectly.  Honestly, it's got me scratching my head.  I'm now working on a project that uses 12 drop zones and I'm seriously considering creating each drop zone video clip separately, exporting them from FCP X, importing them into Motion directly, then export the Motion project as a video which I can then import into FCP X.  I shouldn't have to do that, but at least that seems to work.
    John

  • Is there a way to use the drop zones as a preview area for highlighted video

    I'm making a fairly simple dvd menu, using the centre stage theme  Title Page and I was wondering if there was anway to use the drop zone as a preview area for the highlighted video.
    Thanks!

    Hi
    It is at least possibly to use some buttons like this - But to get this right I had to make special button movies from the big original movie.
    My problem started when I used the original movie that I could not go back far enough for the last buttons and not precise enough either - so by making the small button movies I got 100% control.
    Yours Bengt W

  • How do you adjust the timings of a video placed in a drop zone?

    Hi,
    I brought a template online and have dropped a video into one of the drop zones. It plays fine, although I would like it to start in a different place and fade the sound in and out.
    How do I go about doing this?
    Thanks

    Trim the Out point of your video so that the entire clip is not in your project (this is so you can slip the video and audio). This step may or may not be necessary if the drop zone is not the same length as your video clip.
    Open the timing pane (F6). Hold down OPT while dragging the layer to slip the clip in the project. This will also slip the audio. Once you have it in the right spot, click the audio display button at the bottom of your timing pane (it looks like a little speaker). This will show you your audio track.
    Select the audio layer and go to add behavior/audio/audio fade in out. In the inspector, adjust the behavior to taste.
    Andy

  • Drop Zones  in FCPX used to be videos, now show icons

    I made a long video using motion transitions and build-ins with drop zones. When originally applied, you dropped them onto the timeline above the vide you wanted them to work with, and the video would play behind it with it showing through the drop zone portions. It was a very nice effect. I have to reexport my movie, and I'm now updated with FCPX 10.0.5 (I believe I lasted exported at 10.0.2 in Lion), and now the dropzones just show the downward arrow, the video won't display through.
    Anyone else encouter this? Any solutions? Adding them into the dropzone frame just creates still images, which is stupid.
    Any help would be greatly appreciated.
    FCPX 10.0.5
    ML 10.8.1

    Have you tried trashing your preferences?
    Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
    Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
    http://www.digitalrebellion.com/prefman/
    With Preference Manager, you can backup the Prefs when FCP X (or any of the Apple Professional Applications) are working normally. Then when either of the applications are acting strangely, Trash the Preferences, then Restore from your backups (just a mouse-click).
    If you trash the prefs and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then your backups are up to date.
    Doesn't fix every problem, but it fixes a lot.
    Andy

  • Drop Zone will not play video - only still frame

    I have a generator template with drop zone, in and out.
    When I select the video clip to use in the drop zone it shows as a still freeze frame - video does not play. Only the first frame displays.
    This was a bug that Apple said is fixed in the last version... it is still a problem for me.
    Anyone know about this?

    Motion Template.
    To quote FCPX 10.0.08 "Drop zones are no longer reset to the first frame of video after application restarts".... this is in the 'What's New' in the App store.
    But if you use a drop zone in a generator template, FCPX only displays the first frame - no video. Many users reported this bug on the eearlier version. Some tried using a compound clip but this did not work for me. The bug is nto fixed.
    I need to select a part of two different clips in the timeline on both sides of the template to ceate a transition - one ingoing and one outgoing.

  • CHOPPY VIDEO ON MENU AND DROP ZONES

    I am ready to burn the DVD but the video on a menu page is very choppy. The drop zone is rotating slowly, etc.
    Any ideas on why this is happening? Any ideas on how to fix it?
    Thanks.

    Steve:
    As good practice save the project as a disk image (File->Save as Disk Image menu option) instead of burning directly to disk. This allows you to play the disk image in DVD Player to verify that the encoding of the project was good. If the project plays OK in DVD Player you can then burn that disk image to disk with Disk Utility at the slowest speed available. If there is any problems with the disk playing it can then be narrowed down to the burn process. Also use the top grade media. Verbatim, Taiyo Yuden or Maxell -R are the most recommended brands in this forum.

Maybe you are looking for