Drop zones & autofill issues
hi everyone.
so here's my problem - i've created a sequence of videos in imovie, created chapters for those movies in imovie, & then "shared" to idvd. then i load the theme i like in idvd (baby mobile, btw). i'd like for the videos in that group of scenes to be displayed on the animated drop zones, but for some reason every drop zone in every scene selection displays the same movie (which is the first movie chapter). i've tried autofill drop zones but it just puts the same movie on every drop zone.
so, does anyone know how to make the movies for each chapter exported out of imovie appear on their respective drop zones in idvd?
imovie hd 6.0.2 & idvd 6.0.2
This may be a function of the Theme. I know a theme like Brushed Metal will do what you want when you have chapters; other Themes, like Wedding only shows one clip at a time. Haven't used your theme but I suspect it is the case.
Only workaround I can think of is, to export short movies from the beginning of each chapter and drop them into the indivdual drop zones ... more work and it increases the length/size of your project.
With that kind of Theme I generally create one or two nice mini-movies (anywhere from 30 to 60 secs in length and drop those into the zones
Similar Messages
-
Quality Issues with Drop Zones - Newbie ALERT!
Hello!
First post for me here...
Just started working with Final Cut Studio 5.1 and I have some issues that I have been running into. In DVD Studio, I am grabbing a menu template (Panes Blue) and I am creating a simple text animation in Motion (720x480) NTSC and saving the Motion file then importing the Motion file into DVD studio and setting up the drop zone asset to my motion file. When I preview, the text quality is very poor! At first I thought it was just the preview, but it still looks horrible on the TV when I burn.
How do I get the best quality when creating an animation in Motion that I would like to use in a DVD studio Drop Zone?
Please let me know if you need further info!
Jasonhere's the issue:
DVDSP doesn't encode progressive scan. it doesn't matter what your encode settings are. I've done extensive testing on this issue. here's what happens:
I made an element that fits perfectly into a specified drop zone. the menu Background image or movie is rendered progressive scan (not interlaced). I drop the element into the drop zone and hit Simulate. Since the Drop zone and it's element need to be encoded to Mpeg2 in order to play properly, DVDSP interlaces it to make it work. Result: bad image compression and the drop zone area is badly interlaced while the rest of the image isn't.
This was something that frustrated me for weeks while i was trying to find a solution. As far as I know there is only one solution; Since DVDSP uses Compressor to encode files on build, there must be a way of intercepting the process and changing the settings that DVDSP uses to encode it's files. There is no preference for this and since the encoding takes place in the background, there is no way of changing this without getting a programmer to figure out how to do it, and even then, i don't know if it's possible. If someone can figure out how do do this, there'll be a lot of Happy people wanting it. -
Since updating to FCPX 10.0.6, Both Titles, Transistions and Gernerators that came with final cut and one's I have made myself do not allow me fill a Drop Zone with video. It fill's the drop zone with a Still from the last frame of the video clip I inserted, instead of playing the whole video clip. It worked prior to the upgrade and is something I use on a regular basis. Any Ideas? I've also tried on HD and SD Projects, I'm running the news update of Mountain Lion, and I have 16 iMacs with the same issue.
Drop Zones have been improved in 10.0.6, so I'm sorry you are having difficulties. Motion Titles and Generators (and I'm sure Transitions) with drop zones now behave as expected -- i.e.: dragging out the effect clip will no longer change the playback speed/retiming of the drop zone media, nor will it be limited to the original length of the effect as it was before; which means, you can drop a clip and resize the template to accomodate the playing length of the clip without sacrificing the timing or a predefined "out point".
There is a recommendation for "best practices" for upgrading to 10.0.6 (http://support.apple.com/kb/HT5550?viewlocale=en_US&locale=en_US). I think it was incomplete (at least it was in my case) because of the preferences issues that came about. You can try to delete preferences, but I ended up doing a complete "fresh" install. I followed these instructions: http://support.apple.com/kb/HT5149 to remove any and all possible problem files.
*My* issue was mainly that none of the text boxes I published from Motion would appear in FCPX. There was also another "presumed" issue which turned out not to be one: Anamorphic Override (apparently ONLY appears for SD media and not for 1440x1080 media... maybe next release...)
So, try deleting preferences first (http://www.digitalrebellion.com/prefman/) and if worse comes to worse (and I hope for your sake it doesn't come to this!): do a fresh install... that should clean up any issues you might be having.
HTH -
Perhaps there's something I'm missing, but whenever I drop clips into bumpers or an opener (specifically, the road trip theme) it shows the a still frame of the clip that is not the beginning of the clip. Whenever I add the desired clip after it, it simply starts from the beginning. Whenever the theme zooms into a clip, shouldn't it seamlessly blend into the clip? I've tried various ways and every time it jumps. At one point it zoomed into a white screen.
Am I missing something?That's a known bug. Instead of playing from the start of the clip, the drop zone plays from the start of the clip's source file.
Export the clip to a Full Quality movie, import that movie into the project, then drop it into the drop zone.
Karl -
I created a DVD and added images to the Drop Zones. When completed I burned the DVD. The images in the Drop Zones are grainy with horizontal lines.
The preview before the burn looked fine, really crisp and clear.
Note:
I did use the computer for other things while burning. Do you think that caused the image quality to drop? Should I not do anything while buring the DVD?
Thanks,
Craig
iMac 20" 2GHz Intel CoreDuo Mac OS X (10.4.8) 2 GB RamI created a DVD and added images to the Drop Zones.
When completed I burned the DVD. The images in the
Drop Zones are grainy with horizontal lines.
The preview before the burn looked fine, really crisp
and clear.
I did use the computer for other things while
burning. Do you think that caused the image quality
to drop?
I doubt that is the source of your image quality problems. What was the size (in pixels) of the images you used?
Should I not do anything while buring the
DVD?
Back in the old days (a couple of years ago) with slower processors, doing two things at one could be a problem. With the faster (and dual) processors we have now, using your computer for something else during the encoding/multiplexing process might lengthen the process but shouldn't cause problems. Make your initial 'burn' to a disk image on your hard drive and then use Apple's Disk Utility or Roxuo's Toast Titanium to burn the image file to writable media. I try to avoid using my computer during the actual burning process to avoid any burner buffer-underruns because of hard drive access issues. -
I can not re order the positions of images in the drop zone editor. Instriuctions say to click and drag an image to a new position but this is not working for me.
Is anyone else having this problem?
--kenHi Len,
Yes, I can delete or drop a different image into the Drop Zone editor, but reordering by dragging is a much better way. I have also tried by dragging the images in the Menu pane, doesn't work there either. Works correctly in the slideshow editor.
I just need to know if I am the only one who has this problem or if others have experienced the same issue.
Thanks,
--ken -
Cisco 881 Zone Firewall issues
I'm having issues with an 881 that I have configured as a zone based firewall.
I have allowed HTTP(s) and DNS on the DMZ but my user is saying he cannot access the internet.
On the corporate side the user complains that some websites fail, such as Linked in.
I have been using CCP to configure the device. What am I doing wrong?
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.03.15 11:49:00 =~=~=~=~=~=~=~=~=~=~=~=
sh run
Building configuration...
Current configuration : 22210 bytes
! Last configuration change at 15:30:21 UTC Tue Mar 12 2013 by SpecIS
! NVRAM config last updated at 14:12:39 UTC Thu Mar 7 2013 by specis
! NVRAM config last updated at 14:12:39 UTC Thu Mar 7 2013 by specis
version 15.1
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname -Rt
boot-start-marker
boot-end-marker
security authentication failure rate 10 log
security passwords min-length 6
logging buffered 51200
logging console critical
enable secret 5
enable password 7
aaa new-model
aaa authentication login local_auth local
aaa session-id common
memory-size iomem 10
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-3066996233
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3066996233
revocation-check none
rsakeypair TP-self-signed-3066996233
crypto pki certificate chain TP-self-signed-3066996233
certificate self-signed 01
quit
no ip source-route
no ip gratuitous-arps
ip dhcp excluded-address 10.0.2.2
ip dhcp excluded-address 10.0.2.1
ip dhcp pool Trusted
import all
network 10.0.2.0 255.255.255.0
default-router 10.0.2.1
domain-name spectra.local
dns-server 10.0.2.2 10.0.1.6
option 150 ip 10.1.1.10 10.1.1.20
ip dhcp pool Guest
import all
network 192.168.112.0 255.255.255.0
default-router 192.168.112.1
dns-server 4.2.2.2 4.2.2.3
ip cef
no ip bootp server
ip domain name yourdomain.com
ip name-server 10.0.2.2
ip name-server 4.2.2.2
login block-for 5 attempts 3 within 2
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group 1
parameter-map type inspect global
log dropped-packets enable
log summary flows 256 time-interval 30
parameter-map type regex ccp-regex-nonascii
pattern [^\x00-\x80]
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
license udi pid CISCO881-SEC-K9 sn FCZ1703C01Y
archive
log config
logging enable
username S privilege 15 secret 4
username ed privilege 15 password 7
ip tcp synwait-time 10
ip tcp path-mtu-discovery
ip ssh time-out 60
ip ssh authentication-retries 2
class-map type inspect match-any SDM_BOOTPC
match access-group name SDM_BOOTPC
class-map type inspect imap match-any ccp-app-imap
match invalid-command
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-any SDM_DHCP_CLIENT_PT
match class-map SDM_BOOTPC
class-map type inspect match-any SDM_AH
match access-group name SDM_AH
class-map type inspect match-any ccp-skinny-inspect
match protocol skinny
class-map type inspect http match-any ccp-app-nonascii
match req-resp header regex ccp-regex-nonascii
class-map type inspect match-any sdm-cls-bootps
match protocol bootps
class-map type inspect match-any TFTP
match protocol tftp
class-map type inspect match-any SDM_ESP
match access-group name SDM_ESP
class-map type inspect match-any SDM_VPN_TRAFFIC
match protocol isakmp
match protocol ipsec-msft
match class-map SDM_AH
match class-map SDM_ESP
class-map type inspect match-all SDM_VPN_PT
match access-group 105
match class-map SDM_VPN_TRAFFIC
class-map type inspect match-all ccp-cls-ccp-permit-outside-in-1
match access-group name Any-From-HO
class-map type inspect match-any Skinny
match protocol skinny
class-map type inspect match-all ccp-cls-ccp-permit-outside-in-2
match class-map Skinny
match access-group name Hostcom-Skinny
class-map type inspect match-any ccp-h323nxg-inspect
match protocol h323-nxg
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect match-any Pings
match protocol icmp
class-map type inspect match-any Ping-
match class-map Pings
class-map type inspect match-all ccp-cls-ccp-inspect-2
match class-map Ping-
match access-group name Ping-
class-map type inspect match-any DNS
match protocol dns
class-map type inspect match-all ccp-cls-ccp-inspect-3
match class-map DNS
match access-group name Any-any
class-map type inspect match-all ccp-protocol-pop3
match protocol pop3
class-map type inspect match-any ccp-h225ras-inspect
match protocol h225ras
class-map type inspect match-all ccp-cls-ccp-inspect-1
match access-group name Any/Any
class-map type inspect match-any https
match protocol https
class-map type inspect match-all ccp-cls-ccp-inspect-4
match class-map https
match access-group name any-any
class-map type inspect match-any UDP
match protocol udp
match protocol tcp
class-map type inspect match-all ccp-cls-ccp-inspect-5
match class-map UDP
match access-group name InsideOut
class-map type inspect match-any ccp-h323annexe-inspect
match protocol h323-annexe
class-map type inspect match-any SDM_SSH
match access-group name SDM_SSH
class-map type inspect pop3 match-any ccp-app-pop3
match invalid-command
class-map type inspect match-any SDM_HTTPS
match access-group name SDM_HTTPS
class-map type inspect match-all ccp-protocol-p2p
match class-map ccp-cls-protocol-p2p
class-map type inspect match-all ccp-cls-ccp-permit-2
match class-map Pings
match access-group name RespondtoSomePings
class-map type inspect match-any RemoteMgt
match protocol ssh
match protocol https
class-map type inspect match-all ccp-cls-ccp-permit-1
match class-map RemoteMgt
match access-group name Spectra-RemoteMgt
class-map type inspect match-any SDM_SHELL
match access-group name SDM_SHELL
class-map type inspect match-any ccp-h323-inspect
match protocol h323
class-map type inspect match-all ccp-protocol-im
match class-map ccp-cls-protocol-im
class-map type inspect match-all ccp-icmp-access
class-map type inspect match-all ccp-invalid-src
match access-group 103
class-map type inspect http match-any ccp-app-httpmethods
match request method bcopy
match request method bdelete
match request method bmove
match request method bpropfind
match request method bproppatch
match request method connect
match request method copy
match request method delete
match request method edit
match request method getattribute
match request method getattributenames
match request method getproperties
match request method index
match request method lock
match request method mkcol
match request method mkdir
match request method move
match request method notify
match request method options
match request method poll
match request method post
match request method propfind
match request method proppatch
match request method put
match request method revadd
match request method revlabel
match request method revlog
match request method revnum
match request method save
match request method search
match request method setattribute
match request method startrev
match request method stoprev
match request method subscribe
match request method trace
match request method unedit
match request method unlock
match request method unsubscribe
class-map type inspect match-any ccp-dmz-protocols
match protocol http
match protocol dns
match protocol https
class-map type inspect match-any WebBrowsing
match protocol http
match protocol https
class-map type inspect match-any DNS2
match protocol dns
class-map type inspect match-any ccp-sip-inspect
match protocol sip
class-map type inspect http match-any ccp-http-blockparam
match request port-misuse im
match request port-misuse p2p
match request port-misuse tunneling
match req-resp protocol-violation
class-map type inspect match-all ccp-protocol-imap
match protocol imap
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-1
match class-map WebBrowsing
match access-group name DMZ-Out
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-2
match class-map DNS2
match access-group name DMZtoAny
class-map type inspect match-all ccp-protocol-smtp
match protocol smtp
class-map type inspect match-all ccp-protocol-http
match protocol http
policy-map type inspect ccp-permit-icmpreply
class type inspect sdm-cls-bootps
pass
class type inspect ccp-icmp-access
inspect
class class-default
pass
policy-map type inspect imap ccp-action-imap
class type inspect imap ccp-app-imap
log
reset
policy-map type inspect pop3 ccp-action-pop3
class type inspect pop3 ccp-app-pop3
log
reset
policy-map type inspect ccp-inspect
class type inspect ccp-cls-ccp-inspect-2
inspect
class type inspect ccp-cls-ccp-inspect-1
inspect
class type inspect ccp-cls-ccp-inspect-5
pass log
class type inspect TFTP
inspect
class type inspect ccp-invalid-src
drop log
class type inspect ccp-cls-ccp-inspect-4
inspect
class type inspect ccp-protocol-http
inspect
class type inspect ccp-protocol-smtp
inspect
class type inspect ccp-cls-ccp-inspect-3
inspect
class type inspect ccp-protocol-imap
inspect
service-policy imap ccp-action-imap
class type inspect ccp-protocol-pop3
inspect
service-policy pop3 ccp-action-pop3
class type inspect ccp-protocol-p2p
drop log
class type inspect ccp-protocol-im
drop log
class type inspect ccp-sip-inspect
inspect
class type inspect ccp-h323-inspect
inspect
class type inspect ccp-h323annexe-inspect
inspect
class type inspect ccp-h225ras-inspect
inspect
class type inspect ccp-h323nxg-inspect
inspect
class type inspect ccp-skinny-inspect
inspect
class class-default
drop log
policy-map type inspect ccp-permit-outside-in
class type inspect ccp-cls-ccp-permit-outside-in-2
inspect
class type inspect ccp-cls-ccp-permit-outside-in-1
pass
class class-default
drop log
policy-map type inspect http ccp-action-app-http
class type inspect http ccp-http-blockparam
log
reset
class type inspect http ccp-app-httpmethods
log
reset
class type inspect http ccp-app-nonascii
log
reset
policy-map type inspect ccp-permit
class type inspect SDM_VPN_PT
pass
class type inspect ccp-cls-ccp-permit-2
inspect
class type inspect ccp-cls-ccp-permit-1
pass
class type inspect SDM_DHCP_CLIENT_PT
pass
class class-default
drop log
policy-map type inspect ccp-permit-dmzservice
class type inspect ccp-cls-ccp-permit-dmzservice-1
inspect
class type inspect ccp-cls-ccp-permit-dmzservice-2
inspect
class class-default
drop
zone security in-zone
zone security out-zone
zone security dmz-zone
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ccp-zp-out-self source out-zone destination self
service-policy type inspect ccp-permit
zone-pair security ccp-zp-out-in source out-zone destination in-zone
service-policy type inspect ccp-permit-outside-in
zone-pair security Spec-zp-dmz-out source dmz-zone destination out-zone
service-policy type inspect ccp-permit-dmzservice
crypto isakmp policy 2
encr aes 256
authentication pre-share
group 5
lifetime 28800
crypto isakmp key Y address x.x.x.x
crypto isakmp key o1 address x.x.x.x
crypto ipsec transform-set ESP-AES256-SHA esp-aes 256 esp-sha-hmac
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to x.x.x.x
set peer x.x.x.x
set transform-set ESP-AES256-SHA
match address 100
crypto map SDM_CMAP_1 2 ipsec-isakmp
description Tunnel to x.x.x.x
set peer x.x.x.x
set security-association lifetime kilobytes 128000
set security-association lifetime seconds 28800
set transform-set ESP-AES256-SHA
match address 102
interface FastEthernet0
description B
switchport access vlan 2
no ip address
spanning-tree portfast
interface FastEthernet1
description Docker
switchport access vlan 2
no ip address
spanning-tree portfast
interface FastEthernet2
description Phone
switchport access vlan 2
no ip address
spanning-tree portfast
interface FastEthernet3
description Guest
switchport access vlan 3
no ip address
spanning-tree portfast
interface FastEthernet4
description External $FW_OUTSIDE$
bandwidth inherit
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly in
ip verify unicast source reachable-via rx allow-default 104
duplex auto
speed auto
pppoe-client dial-pool-number 1
hold-queue 224 in
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip tcp adjust-mss 1452
shutdown
interface Vlan2
description Trusted Network$FW_INSIDE$
ip address 10.0.2.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
zone-member security in-zone
ip tcp adjust-mss 1440
interface Vlan3
description Guest Network$FW_DMZ$
ip address 192.168.112.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
zone-member security dmz-zone
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
ip directed-broadcast
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly in
ip verify unicast reverse-path
encapsulation ppp
load-interval 30
dialer pool 1
dialer-group 1
ppp authentication chap pap callout
ppp chap hostname
ppp chap password 7
ppp pap sent-username password 7
no cdp enable
interface Dialer1
ip address negotiated
no ip redirects
no ip unreachables
ip directed-broadcast
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly in
ip verify unicast reverse-path
zone-member security out-zone
encapsulation ppp
load-interval 30
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname
ppp chap password 7
ppp pap sent-username password 7
ppp ipcp route default
ppp ipcp address accept
no cdp enable
crypto map SDM_CMAP_1
ip forward-protocol nd
no ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload
ip access-list standard SSH-Management
permit x.x.x.x log
permit 10.0.2.0 0.0.0.255 log
permit 10.0.1.0 0.0.0.255 log
ip access-list extended Any-From-HO
remark CCP_ACL Category=128
permit ip 10.0.1.0 0.0.0.255 10.0.2.0 0.0.0.255
permit ip 10.1.1.0 0.0.0.255 10.0.2.0 0.0.0.255
ip access-list extended Any-any
remark CCP_ACL Category=128
permit ip any any
ip access-list extended Any/Any
remark CCP_ACL Category=128
permit ip host 10.0.2.0 host 10.0.1.0
ip access-list extended DMZ-Out
remark CCP_ACL Category=128
permit ip 192.168.112.0 0.0.0.255 any
ip access-list extended DMZtoAny
remark CCP_ACL Category=128
permit ip 192.168.112.0 0.0.0.255 any
ip access-list extended Hostcom-Skinny
remark CCP_ACL Category=128
permit ip 10.1.1.0 0.0.0.255 10.0.2.0 0.0.0.255
ip access-list extended InsideOut
remark CCP_ACL Category=128
permit ip 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255
ip access-list extended Ping-Hostcom
remark CCP_ACL Category=128
permit ip host 10.0.2.2 any
ip access-list extended RespondtoSomePings
remark CCP_ACL Category=128
permit ip 10.0.1.0 0.0.0.255 any
permit ip host x.x.x.x any
permit ip host 37.0.96.2 any
ip access-list extended SDM_AH
remark CCP_ACL Category=1
permit ahp any any
ip access-list extended SDM_BOOTPC
remark CCP_ACL Category=0
permit udp any any eq bootpc
ip access-list extended SDM_ESP
remark CCP_ACL Category=1
permit esp any any
ip access-list extended SDM_HTTPS
remark CCP_ACL Category=1
permit tcp any any eq 443
ip access-list extended SDM_SHELL
remark CCP_ACL Category=1
permit tcp any any eq cmd
ip access-list extended SDM_SSH
remark CCP_ACL Category=1
permit tcp any any eq 22
ip access-list extended RemoteMgt
remark CCP_ACL Category=128
permit ip host x.x.x.x any
permit ip 10.0.1.0 0.0.0.255 any
ip access-list extended any-any
remark CCP_ACL Category=128
permit ip any any
logging trap debugging
logging facility local2
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 10.0.2.0 0.0.0.255
access-list 1 permit 192.168.112.0 0.0.0.255
access-list 23 remark HTTPS Access
access-list 23 permit 10.0.2.1
access-list 23 permit x.x.x.x
access-list 23 permit 10.0.2.0 0.0.0.255
access-list 23 permit 10.0.1.0 0.0.0.255
access-list 100 remark CCP_ACL Category=4
access-list 100 remark IPSec Rule
access-list 100 permit ip 10.0.2.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 101 remark CCP_ACL Category=2
access-list 101 remark IPSec Rule
access-list 101 deny ip 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255
access-list 101 remark IPSec Rule
access-list 101 deny ip 10.0.2.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 101 permit ip 192.168.112.0 0.0.0.255 any
access-list 101 permit ip 10.0.2.0 0.0.0.255 any
access-list 102 remark CCP_ACL Category=4
access-list 102 remark IPSec Rule
access-list 102 permit ip 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255
access-list 103 remark CCP_ACL Category=128
access-list 103 permit ip host 255.255.255.255 any
access-list 103 permit ip 127.0.0.0 0.255.255.255 any
access-list 104 permit udp any any eq bootpc
access-list 105 remark CCP_ACL Category=128
access-list 105 permit ip host x.x.x.x any
access-list 105 permit ip host x.x.x.x any
dialer-list 1 protocol ip permit
no cdp run
route-map SDM_RMAP permit 1
route-map SDM_RMAP_1 permit 1
match ip address 101
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^C
Authorised Access Only
If your not supposed to be here. Close the connection
^C
banner motd ^C
Access Is Restricted To Personel ONLY^C
line con 0
exec-timeout 5 0
login authentication local_auth
transport output telnet
line aux 0
exec-timeout 15 0
login authentication local_auth
transport output telnet
line vty 0 4
access-class SSH-Management in
privilege level 15
logging synchronous
login authentication local_auth
transport input telnet ssh
scheduler interval 500
endHello Martin,
Please apply the following changes and let us know:
ip access-list extend DMZtoAny
1 permit udp 192.168.12.0 0.0.0.255 any eq 53
no permit ip 192.168.112.0 0.0.0.255 any
Ip access-list extended DMZ-Out
1 permit tcp 192.168.12.0 0.0.0.255 any eq 80
2 permit tcp 192.168.12.0 0.0.0.255 any eq 443
no permit ip 192.168.112.0 0.0.0.255 any
Change that, try and if it does not work post the configuration with the changes applied,
Regards,
Remember to rate all of the helfpul posts, that is as important as a thanks
Julio -
Images disappear from drop zones
I'm using the "Bands" template, and I'm adding a photo to 3 different drop zones: the first one (the animated one) works fine. But when I add a photo for background on either the menu or "extras" page, it goes in fine, turns black and white and has the shading around the top edge, but when I click on another page in the DVD and back to these two pages, the image is gone and it again says "Drag Photos or Movies Here". Any ideas? I'm using 7.0.4, don't have any compelling reason to upgrade to 7.1 unless this bug is fixed there...
Hi George
Sorry to hear you are having issues with iDvd regarding background and drop zones not staying with the images or photos you picked. I just tried the very same thing you described above running iDvd 7.0.4 on a Dual G5 2.0 Ghz and I cannot duplicate this issue. Mine runs fine and exactly as expected. All choices remain in place. So I'm not exactly sure what's going on with your own particular configuration. But like you I don't recommend updating unless this issue is first addressed in the next update. My feeling is that it won't be. What you may want to do if you haven't already is dispose of the plist for iDvd. Go to your HOME folder > Library > Preferences >
com.apple.iDvd.plist
Drag and drop this file to the trash or to the desktop and relaunch iDvd.
Come on back if this fails to help. Please also let us know exactly how much available hard drive space is remaining on the boot volume (your main HDD). You may also want to repair permissions at this time from apple's disk utility.
Good luck!
Message was edited by: SDMacuser -
Drop Zones shows correct image but previews using old photo with same name
Everyday I do my customer DVD's in the same format. I capture, then edit, take eight screen shots (as jpeg's) to use in iDVD for the title screen. Then after I have checked the completed DVD I delete the Jpeg's and the iDVD project. I also delete the iMovie project as I use a standard template with promo at the start and credits at the end.
After upgrading to iDVD 6 (i did upgrade iMovie 5 to 6 but had to go back because of bugs) I have noticed that when I add my jpeg's to the drop zones they appear correct but the preview in the background shows another jpeg. Looks like a previous jpeg used for another project that I have since deleted.
Has anyone else had this problem. I found that if I go back and rename the latest images I want to use (i normally just use a generic name like c1, c2, c3 etc) it works fine until now. But I am sure this problem will resurface with time even using full names.
iBook 14" Mac OS X (10.4.4) 1.5GB RamAll,
I had the same issue.
In my case, Blob Cache was enabled for the web application in which the image issue was occuring.
I cleared blob cache, and after doing a hard refresh of my browser, the correct image was then displayed.
To clear blob cache, do the following:
Navigate to:
http://yourwebapp:port/yoursite/_layouts/objectcachesettings.aspx
Select: "Object Cache Flush" and "Force all servers in the farm to flush their object cache" check boxes
Click the OK button
Hope this helps. -
Images won't appear in Drop Zones
This has been bugging me for a while now. I am trying to create an easy to use/burn presentation platform for a recent group trip I went on. I'd like to eventually be able to burn copies to a DVD so that others may have a copy of our adventure. At first I was going to just create a slideshow using iDVD, when I came into these troubles I switched to using iMovie to create a slideshow with the music I want and the transitions I want. That still leaves the embellishment portion of it. I don't want the menus to look boring.
What I am finding to be troublesome is that I try to import images from iPhoto into iDVD and they some times, more often than not, will not appear in the drop zones on the larger screen. They will show in the editor but not above. I've tried changing themes, same thing. I have also tried to bypass iPhoto by importing the images I want into the drop zones by using the File>Import>Image... route.
Please, any help would be GREATLY APPRECIATED!!!
I'm running on a Mac OS X v10.6.8 with 2.26 GHz Intel Core 2 Duo with 8GB 1067 MHz DDR3.
The iDVD is version 7.1.1hi there, I am confused when you stated you cant "import images from iPhoto into iDVD" .
The way I get photos into the drop zones is to drag the photos from the media browser on the right hand side of the screen. I don't "import" .. unless I'm misinterpreting the use of that term. here is my idvd project and note on the bottom right hand side I've clicked Media. Then I click Photos on the top and it shows me all my photos. Thats where I drag and drop FROM.
Note you can also drag and drop photos from a finder window. The only time I have issues is if my photo is a landscape and I'm trying to stick it into a box that is portrait and vice-versa.
does this help at all? -
Photos in Drop Zones not visible
Hi,
I recently purchased a refurbished iMac and have used iDVD previously, but am having trouble with it now. It's my first attempt at iDVD since I bought the computer. I'm using a 6.0 theme, Reflection Black. When I drop photos into one of the eight drop zones, the zones go black. I can see in the drop zone editor area that the photo is loaded, just not visible. The twist is that the first time I use the photo it works. But if I try to drop it in the second time, or close the saved draft and then reopen, I get a black image where the photo should be. I've searched on the help topics, and can't figure it out.
Thank you!You're right. There's not alot of info available on this particular issue regarding invisible slideshow photos. So let's try the following.
You say the photos are showing in the drop zone editor nevertheless ..... correct?
What happens when you add a transition (simple 3 second dissolve for example)?
If that fails to help then add music as well and then set the slideshow to "fit to audio". Post back with your results.
Message was edited by: SDMacuser -
When bringing Imovie6 project into IDVD6, I bring in the project and then select "autofill" for the drop zones. This lets the movie play in the drop zones which is easy and looks kind of cool and I am happy with it. I also notice that when I click on each individual drop zone a slider appears that gives the impression of being able to choose which part and how much of the video plays in each drop zone. However, when I move the slider, it moves, but then returns as soon as I let go of it, making no changes.
1) How do I adjust how much and which part of the video plays in each drop zone?
2) If each drop zone is playing the entire video, is this increasing my rendering time?
ThanksI have had the same problem. I find it difficult to get the start and stop points set up as I would like them. Here's a solution that I am currently using:
1. Find a segment of your movie that you would like to appear in the drop zone, make it the length you want, and export as a separate clip. I used MPEG Streamclip but any editor should work.
2. Drop that shortened clip into the drop zone. You might need to open the inspector and set a loop duration.
3. Find your full movie and drop it onto the menu placing it anywhere other than the drop zone.
4. A button will appear where you dropped the movie. By adjusting the font size and number of returns you can create a square the same size as the drop zone.
5. Drag the button that you created over the drop zone. The short clip plays under the "invisible" button. Clicking the drop zone causes the entire movie to play. -
I have some B&W pix going through a drop zone and have been getting a sort of 'ant' effect -- a cascading and in some cases a flicker on lines. I started dealing with it in FCP but have fixed everything there, and narrowed it down to the drop zone. When I play the DVD pictures in a track and burn a test, they are ok. It's not like it's a drop zone effect that is showing up - rather it's not playing the pictures properly.
Here's a link to the FCP thead for more information about the issues with the pictures--
http://discussions.apple.com/thread.jspa?threadID=558252&tstart=0
What can I do to fix this? ThanksAny ideas? Anyone?
-
Exact Frames for movie in drop zone
I am trying to get some exact frames for a movie in one of my drop zones. Looks like the slider only moves in 30 second increments. I know this correlates to the length of the loop for my menu. However, I would like to know if there's a way to move the slider more precisely. There is a certain frame I would like it start on and I just can't seem to get the slider to stop on it.
Well, I have my Leopard disks, but have not installed it on this computer.....tried it out on my son's Mac mini first. Not sure I am ready for it yet. Maybe after reading that all the initial problems with it have been resolved......mayber after the 5th revision !
I do use the 7 themes in iDVD and have not had freezing issues, just the slider inexactness. -
Submenu transitions & Drop zone Slide Shows
Two items:
Has anyone else run into these issues?
1) Submenu transitions don't work properly in preview mode.
2) When adding images for a slide show in a drop zone pane, the images are supposed to cycle--but mine don't unless I start fiddling with the loop time--which is not adequatley explained in the documentation.
G5 Dual Core 2.3 Mac OS X (10.4.6)
G5 Dual Core 2.3 Mac OS X (10.4.6)Cycling does occur based upon the loop time chosen.
Maybe you are looking for
-
After many happy years with my PowerBook G4 12" (I will miss it definitely, as compact and cute as it is ;-() I'll now switch to a new MacBook 2.16 GHz with 2 GB RAM and a 120 GB hard drive. I will have to use Windows (not yet sure if XP or Vista), a
-
Missing trade in credit - please help
I typically don't like to complain, but the bestbuy employee I had to deal with was horrible. Simply didn't want to do his job. I'm a very reasonable person, but again this person was a slacker. I purchased Gamers Unlocked last night then traded 2
-
Error running import package: it removes the journals
Hello experts, I have a problem when I run the import package using the "Replace&Clear "data option. Apart from clearing the INPUT data, it clears the journals. When the package ends running, the previous data is correctly cleared, the new data corre
-
Updating Unit Cost by using Actual Cost Adjustments
Hi, How can we adjust Unit Cost by using Actual Cost Adjustments Window? By giving Cost Adjustment without giving Adjustment Qty, the amount was adjusted to total quantity (transacted during the period). But I want to increase unit cost by a fixed am
-
How to assign roles without Sap*
Hi I have created an administrator account and I forgot to assign him roles... My Sap* user id is desable on top of that I have tried to modify the ume.superadmin.activated=true but its still not working. any ideas?? JF