Drop Zones shows correct image but previews using old photo with same name

Everyday I do my customer DVD's in the same format. I capture, then edit, take eight screen shots (as jpeg's) to use in iDVD for the title screen. Then after I have checked the completed DVD I delete the Jpeg's and the iDVD project. I also delete the iMovie project as I use a standard template with promo at the start and credits at the end.
After upgrading to iDVD 6 (i did upgrade iMovie 5 to 6 but had to go back because of bugs) I have noticed that when I add my jpeg's to the drop zones they appear correct but the preview in the background shows another jpeg. Looks like a previous jpeg used for another project that I have since deleted.
Has anyone else had this problem. I found that if I go back and rename the latest images I want to use (i normally just use a generic name like c1, c2, c3 etc) it works fine until now. But I am sure this problem will resurface with time even using full names.
iBook 14" Mac OS X (10.4.4) 1.5GB Ram

All,
I had the same issue.
In my case, Blob Cache was enabled for the web application in which the image issue was occuring.
I cleared blob cache, and after doing a hard refresh of my browser, the correct image was then displayed.
To clear blob cache, do the following:
Navigate to:
http://yourwebapp:port/yoursite/_layouts/objectcachesettings.aspx
Select: "Object Cache Flush" and "Force all servers in the farm to flush their object cache" check boxes
Click the OK button
Hope this helps.

Similar Messages

HT1296 I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggesti

I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggestion?

I would love to do this as well. All I need is my calendar appts from outlook. Right now I am using google calendar sync, but I would like to move to the cloud and away from google. I find it hard to believe there isn't an option to do this.

Using multiple SSIDs with same name but different PSKs

I have a central WLC 2504 controller that is being used for remote site FlexConnect 1141 APs. They all advertise three different SSIDs. One SSID is a global SSID that is the same at every office. One is a hidden SSID using 802.1x machine auth.
The one I am trying to get working is the local office guest network. These SSIDs are all the same at each office but should have different PSKs. They are local to the office, therefore would only ever be applied to a specific FlexConnect group.
I understand why in theory this is generally not a good idea but given these are for remote sites I'd like it to be possible. I always get this message though:
"WLAN with duplicate SSID and L2 security policy found"
Is there a way around this? New WLC code that allows it maybe?

I was able to configure three (more I think possible) WLANs with same SSID name and all are WPA2-AES-PSK on the same WLC and all are enabled at hte same time.
Note that you can not have any of those broadcasting on same AP group. Each WLAN can be only broadcasted on a separate AP group. For your sites, It will probably need you to define an AP group for each site to broadcast different WLANs on different sites.
You can do that if all your WLANs have an ID of 17 or higher. (the reason is, WLANs of 1-16 are by default broadcasted on the default AP group. and because those can not be on the same AP group - including the default one - then you can't have them with WLAN IDs 1-16. i.e on same - default - AP group)
HTH
Amjad
rating useful replies is more useful than saying "Thank you"

ACL denied using Pkb but works using anonymous block with same user

I have a recent 11g installation with a developer that is getting a access denied message when using a package but is able to run the same code manually in sqlplus and it works.
eg. I have granted access to connect and resolve to the user BLAH.
from sqlplus, BLAH can do
select trim(substr(utl_inaddr.get_host_name,1,30)) from dual;
TRIM(SUBSTR(UTL_INADDR.GET_HOST_NAME,1,30))
serverhostname
and get the hostname successfully, but this same line in a pkb fails when called like so
exec func_name.something()
BEGIN func_name.something(); END;
ERROR at line 1:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_INADDR", line 4
ORA-06512: at "SYS.UTL_INADDR", line 35
ORA-06512: at line 1
ORA-06512: at "BLAH.FUNC_NAME", line 83
ORA-06512: at line 1
but if you were to do this same bit of code in sqlplus as follows:
set serveroutput on
declare
mhost varchar(30);
begin
select trim(substr(utl_inaddr.get_host_name,1,30)) into mhost
from dual;
dbms_output.put_line(mhost);
end;
it works.
I do not understand this at all. This is the same user account that owns the pkb and is running it in sqlplus. The user has been granted the connect and resolve priv through being granted a role that has this permission.
Can anyone help me out here?

Thanks, the oracle logic behind this doesn't make sense to me - if the user can do this action, then surely the user should be able to run the package...
Anyway, I will try to grant directly to the user that needs the privs, but then how do I grant this privilege to multiple users, it's some awkward bit of pl/sql just to grant it to one user.
Here is what I did:
dbms_network_acl_admin.create_acl(acl => 'filename.xml',
description => 'Network permissions for BLAH_USER to connect/resolve any host',
principal => 'BLAH_USER', is_grant => TRUE, privilege => 'connect');
dbms_network_acl_admin.add_privilege(acl => 'filename.xml', principal => 'BLAH_USER', is_grant => TRUE, privilege => 'resolve');
dbms_network_acl_admin.assign_acl(acl => 'filename.xml', host => '*');
grant execute on dbms_network_acl_admin to BLAH_USER;
but this only works for 1 user and I cannot recreate this as the acl now already exists. Would I have to change filename.xml every time and do all these steps for every user?
This is why I granted to a role and then granted that role to the BLAH_USER originally.
Any ideas on how to make this scalable to many users or to add users to this ACL?

Using recompressed files with same name -- DVD Studio keeps crashing!

Hi,
I completed a project for a client, but they now want music added to certain parts of it. Because there are so many menus, buttons, etc., I decided to add the music in FCP, recompress the files using the same name as the original file used in DVD Studio, and hoped that everything would then relink.
It does relink (it gives me the message that assets may have changed timing, etc) but any time I try to do something (like Simulate it), it crashes.
What am I doing wrong? Is there a better or easier way to solve this problem? Would greatly appreciate anyone's help.
Thanks!

In theory it SHOULD work, FCP seems to do a good job updating say if you are using a Photoshop file and you change it. The timeline in FCP shows the change and I never seem to get any problems there. With DVDSP, however, it's a whole different story. As the previous poster said, change the name and that should work. It sounds like your project might be beyond fixing that way however.
Here's a little more on the subject of replacing assetts and what I learned: http://discussions.apple.com/message.jspa?messageID=9788507#9788507

Two Beans of same Class - using in JSP with same name

Hi, all:
I want to do something like this:
<jsp:useBean id="entryBean" scope="session" class="myPackage.myClass"/>
<% if (entryBean.getUserRole().equals("Administrator)) { %>
<jsp:useBean id="adminBean" scope="session" class="myPackage.UserBean"/>
<% } else { %>
<jsp:useBean id="userBean" scope="session" class="myPackage.UserBean"/>
<% } %>
This, of course, works. But the problem comes when calling the methods. Usually I would use
<%= userBean.getName() %> - but in this case I don't know whether the bean I have is userBean or adminBean, and there doesn't seem to be a way to call them something other than their id in the session, so that I could get a variable name assigned to both, so I can just refer to a single object.
Any ideas?
Thanks, I appreciate any input.

You'd probably have to have another "fake" bean that references the bean you're using:
<jsp:useBean id="entryBean" scope="session" class="myPackage.myClass"/>
<%
UserBean proxyBean;
if (entryBean.getUserRole().equals("Administrator"))
%>
    <jsp:useBean id="adminBean" scope="session" class="myPackage.UserBean"/>
<%
    proxyBean = adminBean;
else
%>
    <jsp:useBean id="userBean" scope="session" class="myPackage.UserBean"/>
<%
    proxyBean = userBean;
%>
Name: <%= proxyBean.getName() %><br/>No doubt someone's gonna grumble about it not really being a proxy but I couldn't think of another name for it.
Anyway, hopefully the idea here is clear.
Hope this helps.

Chart creation using multiple series with same name

I'm new to Numbers and to chart creation in general, so I'm not sure if Numbers is capable of what I need. But if so, I'd like to know how...
I have a large spreadsheet with hundreds of lines of expense data, wherein each line item falls into one of a dozen categories of expense types. I would like to create a pie chart by expense type (ie, Healthcare, Automotive, Travel, etc), but Numbers wants to treat each line item as a separate expense, even though many of them share the same name. So I'm getting multiple pie slices that all say "Travel" and so forth. I really just want one pie slice for Travel, one for Auto, etc.
So how can I make Numbers calculate the subtotals for each expense type and use those subtotals to create the chart? Is there a way to do this within the chart function or do I need to create a separate table for just the subtotals (not sure how to do that either) or what?
Thanks!

It appears that I missed your question.
Here is a way to treat the problem:
In Tableau 2 column B the formula is:
=SUMIF(Tableau 1 :: B,A,Tableau 1 :: C)
The column A of Tableau 2 is a header.
Yvan KOENIG (from FRANCE lundi 14 avril 2008 14:26:37)

My ipad is showing 7gb of storage being used on photos but there's no where near that many pictures! How do i get it to show the correct amount of storage available?

My ipad is showing 7gb of storage being used on photos but there's no where near that many. I turned off photo stream but nothing has changed yet. How do i get it to display the correct internal usage now that photo stream is off? I also thought that icloud used another form of storage outside of the internal storage for photos, so im not exactly sure why the photos were ever in my internal storage to begin with. Does anyone know how that happens, or how to correct this problem? Im also trying to sync my ipad with my computer hoping that'll help, but nothing so far, its just taking a long time to back up.

If you are syncing now, that may correct the incorrect storage reading - assuming that it is incorrect.
You can also try something like this. While the iPad is still connected to iTunes - but after you sync - go into the Photos Tab in iTunes and toggle setting for Sync Photos From. Uncheck the setting and then check it again. See if that affects the capacity bar to show the correct storage amount.

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos.

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

Bootdisk two images with same name n time

hello,
I have copied new image on 6509 , s2t54-adventerprisek9-mz.SPA.151-1.SY1.bin but when i do show bootdisk: it shows 2 images with same name .
6509#show bootdisk:
-#- --length-- -----date/time------ path
1     33554432 Apr 19 2013 03:22:44 +00:00 sea_console.dat
2     99168744 Apr 19 2013 03:28:42 +00:00 s2t54-adventerprisek9-mz.SPA.151-1.SY.bin
3            0 Apr 19 2013 15:44:26 +00:00 call-home
4         7209 Jun 11 2013 15:02:10 +00:00 startup-config.converted_vs-20130611-150121
5         7126 Jun 11 2013 15:37:38 +00:00 startup-config.converted_vs-20130611-153738
6     33554432 Apr 19 2013 03:46:50 +00:00 sea_log.dat
7     28856320 Apr 19 2013 04:04:56 +00:00 c6500-fpd-pkg.151-1.SY.pkg
8     99763688 Nov 19 2013 10:22:30 +00:00 s2t54-adventerprisek9-mz.SPA.151-1.SY1.bin
9     99763688 Nov 19 2013 10:22:30 +00:00 s2t54-adventerprisek9-mz.SPA.151-1.SY1.bin
729382912 bytes available (295174144 bytes used)

Its kind of cosmetic issue. Verify the same using the command dir bootdisk:
Thanks & Regards,
Karthick Murugan
CCIE#39285

Can i have xml elements with same name but one is having attrbt..?

Hi all,
I am suppose to take input from one system into BPEL.That system is auto gererating xml file. But that file is strange. It has two xml element with
same name but with completely different sequence. First one is having two comlexTypes while second is having 5 simple types.
Now the difference is First element is having attribute while second is not.
So is that file is correct.?
thanks a lot.
/mishit

can you post the file? or load the file into JDeveloper and check the syntax or use XMLSpy for validation of the XML.

Can I run 2 different domains with same name but on 2 different machines?

I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
          When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
          Here is the error in the log -
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          Thanks
          Satish

Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
          although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

Drop Zones shows correct image but previews using old photo with same name

Similar Messages

Maybe you are looking for