Dropbox folder no longer recognized after upgrading to yosemite

After I upgraded to Yosemite my dropbox folder is no longer syncing to dropbox.  Has anybody else had this issue?

Yes - also, the dropbox icon on the top bar goes to a white blank if I've closed and opened the lid to my Macbook Air - I do a restart to see it and to access files - weird.

Similar Messages

  • Time Machine backup on external drive no longer working after upgrade to Yosemite

    Can anyone explain why, after upgrade to Yosemite, Time Machine is no loger working? Backup on external drive stops few seconds after it has started. What can I do?

    Welcome to Apple Support Communities
    Try running a DVD Lens Cleaner disc through it, a little bit of dust or dirt is all it takes to throw them out and it might just be co-incidental with the upgrade.

  • Firewire drive no longer recognized after upgrade?

    having an onset of problems the last 2 weeks.
    first upgraded to 10.4.6 on mac mini 1.42 non-duo, worked a few days than acted weird with apps crashing. had to reinstall from 10.4 disk. seemed ok. repaired permissions, ect. after reinstall (and a subsequent power outage) a firewire drive attached at time was no longer recognized by mac mini or connected imacG3. reinstalled 10.4.2 on mac mini. installer unable to reinstall 10.4.6., I would like to have firewire drive recognized again. when attached to other firewire drive in daisy chain, says device unrecognized, other wise unable to get any info on drive. what to do?

    I am having nearly the exact same issue as you are experiencing. My Western Digital Dual-Option Media Center 160 GB FW HD is going in and out big time. It seems to be there for a time but then conks out. I have to disconnect the power and now the drive seems to be malfunctioning.
    Same story with my LaCie 52x CD Burner. I placed the Disk Warrior CD in there and the computer recognized the disc at first but then spinning beach balls galore!
    This has to be one of the worst updates to an OS X system I can remember. I can only think PowerPC QA testing has gone through the toilet since the Intel move was completed.

  • SD camera card no longer recognized after upgrading to Windows 8.1

    After I upgraded from Windows 8 to Windows 8.1, my computer no longer recognizes a camera SD card.  Any suggestions?

    Hi,
    Regarding your issue here, we could take the following steps for troubleshooting.
    1. Please check the device manufacturer’s website, see if there are any updates regarding SD card reader available;
    2. Please refer to the KB below to use the Microsoft software updates.
    Activity isn't detected when you insert or remove an SD card in Windows 8.1 or Windows Server 2012 R2
    http://support.microsoft.com/kb/2929878
    If there are any problems, please let me know.
    Best regards

  • Ipod and iphone no longer recognized after upgrade to 8.0.1

    I just updated my iTunes to the 8.0.1 version and now none of my ipods or my iphone connect with itunes AND they won't charge via the usb cable that connects them. They worked perfectly until I installed the upgrade. Does anyone have any suggestions on how to fix this? If I uninstall iTunes and replace with previous version, will the tv shows I"m currently downloading that say 8.0.1 is required for their download, still play? Will my library still work?
    Thanks for your help.
    Paula

    Well another reboot seemed to fix it for now. Problem solved

  • RAW images no longer recognized after upgrade

    Greetings,
    I have a mid-2010 iMac which I have been using iPhoto along with my Nikon D70 without issues for some time. I jsut recently upgraded to Lion and I went to download the pictures on my camera and now it does not recognize the RAW (.NEF) images. I get an error when downloading and nothing ends up in iPhoto. Even when looking at the images that are still on the camera when running iPhoto, they do not display, only gray boxes.
    My IPhoto is update to date. iPhoto 11 (9.2.2)
    Verified Disk permissions
    Lion completely up to date.
    D70 which has worked on this platform since 10.5 and all iPhotos in between with no issues.
    Any ideas?  Anyone think this is a Lion issue or an iPhoto issue?
    I usually USB transfer from camera to mac. (D70 has a CF card)
    Any help is appreciated! Thanks!

    Hi Terence,
    That was a great idea! I didn't realize there was another application that I could use to download these pictures.
    Image Capture was able to see the .NEF images and download all of them off the card. It did notice that there were two images that it thought corrupted.
    Once I reformatted the cards and took some pictures iPhoto was able to see the .NEF images and download them from the camera with no issues.
    Thanks again!

  • Garmin ANT+  agent app no longer works after upgrading to Yosemite

    Hi,
    I have ANT Agent for my Garmin watch (version 2.2.2 - latest) which worked perfectly in Mavericks but no longer works in Yosemite.
    Can anyone help?

    ewaller wrote:
    Hello,
    Welcome to the forums.  Your post is fine in every way.  Introduction, problem description, what you have done -- perfect.  The package you reference is from the AUR which, as you know, is not in the main stream Arch distribution.  These community contributions are essential Arch, but have their own area in the forum to differentiate them.
    Moving this thread to AUR issues...
    As it turns out. This isn't a bug in AUR/easystroke. It is a bug in the latest xserver 1.10.902 (found in the "extra" repo)  Many applications are affected. Opera, chrome (if you are using the mouse gestures features for navigation) and it turns out that while i thought Maya wasn't affected, in reality, it is totally affected. most applications that use a mouse with right-clicks, middle clicks do not work properly.
    it's an upstream bug, that affects all distributions using the latest Xorg. I am not filing a bug report, because as i understand it, this bug has already been reported upstream by Ubuntu-devs (on launchpad).
    that latest update for Xserver, should have been tested better, before being an update available through pacman.
    On my system, i do not use any testing repos, only core, extra, and community. I do this to avoid situations, just like this. lol.
    I have work i need to get done today, but unfortunately, the only way that could happen is if i downgrade xserver (which i don't think is a smart idea). So, i guess i must wait for the next xserver update for arch. hopefully this happens in the next 24hours.
    I suppose i will have to use OSX for now, until this is properly addressed and fixed.
    anyway, i just wanted to point out that this bug has nothing to do (specifically) with Easystroke or AUR, that is just how i first noticed the bug. ( i just wanted to point that out, as you are a moderator ). This bug is in the main repos for Arch, and anyone updating today (or yesterday) will be affected, if they use applications where it's noticable.
    jordan

  • Script no longer works after Upgrade to 10.4.6

    The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
    When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
    When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
    Anyone else having Applescript problems with 10.4.6?
    --Bob
    tell application "Finder"
    activate
    set fname to selection as string
    if fname contains "0." then
    move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "1." then
    move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "2." then
    move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "3." then
    move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "4." then
    move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "5." then
    move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "6." then
    move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "7." then
    move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "8." then
    move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    else
    if fname contains "9." then
    move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end if
    end tell

    I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
    First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
    What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
    I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
    It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
    Jeff Johnson
    Dual 1.2 GHz   Mac OS X (10.4.6)  
    Dual 1.2 GHz    

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • After upgrade to Yosemite, drag and drop for files does not work, destination folder crashes.

    After upgrading to Yosemite, dragging and dropping files from one location to the destination folder, causes the destination folder crash. However, copying the file and then moving it works fine.
    I'm not sure where to report bugs, but I figured this would be the best option

    http://www.apple.com/feedback/  Feedback
    https://bugreport.apple.com/  BugReporter

  • After upgrading to Yosemite, my Exchange calendar no longer syncs to iCal (the Apple calendar). Help?

    After upgrading to Yosemite, my Exchange calendar no longer syncs to iCal (the Apple calendar). Help?

    That's not the point.    Before iCloud, Outlook synched with Apple Calendar and/or iCal.    With iCloud, Cal syncs with iPhone and other devices.     Outlook doesn't have to sync with iCloud (although that would certainly be nice).   It just has to continue to sync with Cal, which in turn syncs with devices via iCloud.
    But for some inane reason, it doesn't.    If this is Apple's way of forcing people to not use Office and only use Calendar and Apple Mail, they are going to stop the gains they've made in business environments.   Businesses, especially large businesses, use Outlook.   End of story.
    Furthermore, Apple's instructions for setting up or deleting iCal and iCloud accounts is complete gibberish.  And I'm a tech who has been working with computers for 32 years.   Apple used to be great at making things easy.  They now suck at it and are just as bad as Microsoft.

  • IPhoto no longer work after upgrading to Mavericks.

    My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

    kmg55 wrote:
    Just upgraded and Iphoto will not work,
    Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
    If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

  • After upgrading to Yosemite is my program folder empty

    after upgrading to Yosemite is my program folder empty, while the programs are saved on my PC. But they are not discoverable in a folder. Who recognizes this problem and can help me?

    If by program folder you are referring to the Applications folder, it should not be unless something went wrong with the upgrade.
    You can restore it from your backup you made prior to the upgrade.

  • HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

    home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device.  phone no good without a home button

    The button's broken.  S**t happens.  Apple will replace your phone.  If in waranty it will be free of charge.  If not, you will pay $149. 
    You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

  • I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

Maybe you are looking for