Dropdown Box in WAD (Please help me as i posted many times,but no infos)
Hello ,
I have defined two drop down box one for Plant and other for Material.
Plant has 14 entries and Material drop down has 100 entried for every plant.
Now Dropdown Box is assigned with characteristcs info object 0PLANT
2nd Dropdown Box is assigned with characteristcs info object 0MATERIAL
Plant is used as an Compounding attribute of 0material.
When i select plant 4040 corresponding material numbers will be displayed in dropdown box of material.
After that i am selecting a material from that dropdown box.
Now if i change the plant it is not displaying me any values even though there is data for that plant.
The dropdown box keeps the previous selection and it is not getting refreshed .
How to solve this issue.
Please help me!
Kind regagrds
Ram
Points will be assigned
Hello Rakesh,
Thanks for the informations,
But already these options were selected.
My issues in if i select 1st drop down box and then select second drop down box the values are displayed.
Now if i make change in the 1st drop down box the previous selection of the first drop down box was not cleared and because of that it does not show the values in the chart or table.
i need to solve this issue,
Please help me with informations
Lots of thanks in advance
Kind regards
Ram
Similar Messages
-
Someone please help me regarding synching for first time but with lots of apps on the iPad
Hi, when I bought my iPad2 it was booted in the store, and since then I never connected to a computer, how do I now sync to my PC without losing all the apps I paid for? Please help, thanks.
Authorize your computer for iTunes content - launch iTunes and go to Store>Authorize this computer. Make sure that you are signed into your iTunes account on the computer as well. If you are already authorized and have been using iTunes on your PC you are good to go.
I copied this from another discussion. If you follow these steps you should be fine - for all of your purchased content.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
That should do it. -
What is the use of dropdown box in wad in bi-7
what is the use of dropdown box in wad in bi-7
Hi,
Dropdown box in WAD is for changing the output of full or particular part of template at runtime.
For Eg. suppose u have states in dropdown box and u want the output of according to particular state then u select that state from dropdown box. so the output comes accordingly.
For doing these u have to assign a data provider to dropdown box which query give the output of states. and in the property of dropdown box u hav to assign the item which will affect by this dorpdown box.
I think it will help u.
Assign Point if it helps.
Regards,
Ravi -
I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!
Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Also,
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!
I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!
-
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
Please help, I can't find face time and Siri icon on my mini ipad? Just bought it I have the IMessage icon and is able to use it.
There is no Siri "icon". You access Siri using the Home button. But you may need to turn it on: Settings App > General > Siri. http://support.apple.com/kb/HT4992
Same for the FaceTime function (but if it is ON, there will be an icon): Settings App > FaceTime > [turn it on and set you Apple ID. http://support.apple.com/kb/HT4319 -
i drop my phone so i got a new one and back up everything... well now i have pics on my phone that i dont want and i cant delete them please help i tired hooking up to iTunes but still cant delete certain ones.... i can send them or post but nothing to delete them
The pictures that are on your phone, that you don't want, did they appear there after syncing with iTunes? Or were they taken with the iphone's camera?
Pictures synced from iTunes have to be removed by syncing again, but not having those pictures checked under the Photos tab in iTunes. -
Please help with an Indesign Post Card Problem!
Greetings! I am in need of some help! I am trying to create a post card in InDesign and then send it to a printing company. I sent my finished product to the company and they stated that it would not work out well. The font is too small, pictures are too fuzzy, dimensions are off, etc... I am confused because after reading and researching how to create a 4x6 post card in Indesign, I am still doing something wrong. Please, please help! Thank you for your time.
They would like a 4"x6" PDF. I only need to create the design for the front of the post card, not the back.
They said:
"From the PDF send earlier, I see that you are working in Adobe InDesign.
The document size I believe you are trying to achieve is a postcard 6" wide by 4" tall.
Please make sure your document size is set up accordingly within InDesign; also make sure it has a bleed edge of 0.125" on all four sides.
Make sure that your images are 300 dpi, and to size; if you have a small photo and you are trying to enlarge the image may come out "fuzzy.""
How do I set up my document as a 4"x6" and how do I make sure my photos are 300 dpi?
How do I upload a screenshot? Says the image is forbidden.
Thanks for helping! -
HT1926 i've tried so many times but the problem still exists! please help!!
i've tried so many times but the problem still exists! please help!!
Could you describe what your problem is, please?
-
i have apple id but in this week i see this error : you must verify your payment info befor you can make purchases. please help me. i have not credit card but i buying apps with gift card. please help me
Why do you keep making multiple posts with this issue? You have now posted it three times in the last hour and have two different people helping you in two different threads!
https://discussions.apple.com/message/18606895
https://discussions.apple.com/message/18606685
This is bad internet manners. -
Why cant I download iOS 7. I have tried it many times but always says please check back again? Help!!!
Patience and try, try again. It worked for me after trying 50+ times for 30 minutes.. felt like forever but really not that bad. It's updating as we speak.
-
i have done update my IOS, but is not activate yet... i have had try so many time but always fail..i dunno what method supposed i do..please help me to solve this prob. tq
You can't if your iPhone was hacked/jailbroken to unlock.
-
iPhone could not be activated because activation server is temporarily unavailable. this is now the third day and nothing improves please help. iTunes says my sim is locked but I can't unlock it
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
If your iPhone has not been jailbroken, see the troubleshooting suggestions here:
http://support.apple.com/kb/TS3424?viewlocale=en_US -
Can i change ios 8 to ios 7.1.2 please help me my mobile stuck every time
can i change ios 8 to ios 7.1.2 please help me my mobile stuck every time
<Email Edited by Host>No, there is no way to downgrade iOS.
Maybe you are looking for
-
PROBLEMS SETTING UP REPORTS SECURITY FEATURE
1. Trying to follow instructions to set up the Reports Security Feature. 2. Successfully run the script rwwwvins.sql 3.Hitting following Error " Missing string(reports_security_desc) language(us) domain (wwc)sub_domain (sec) The portlets have similar
-
Unable to share from iphoto using Messages....
I have upgraded to Mavericks and have noticed that I can't share a photo directly from iphoto using Messages. Anyone else have this problem? I got an error message once that said something like "couldn't communicate with helper application". Usually
-
How to call pl/sql function from oaf
Dear Friends, I am trying to call a function from oaf page .but iam getting error like java.sql.SQLException: ORA-01861: literal does not match format string ORA-06512: at line 1 THis is my function ,,callable statement FUNCTION CAR_LOAN_VALIDATION
-
I *believe* this is not off-topic, apologies if anyone considers it so... Clinician has passed on a series of WMV files captured from a PC application http://www.materialise.com/materialise/view/en/2407363-Cranio-Maxillofacial.html which generates a
-
Why are all paths in Clipping Masks and Compound Paths?
When I open up previous versions of Illustrator files (i.e. CS5), why are all of my paths messed up. Every object is embedded in a Clipping Mask, paths are compounded and in most cases type on a path is expanded into multiple non-editable objects. Th