Dropdowns on google search results page stopped working. why?

i did not install anything. but my dropdowns and expand (+ button) on google search results page just stopped working.
http://img.skitch.com/20090923-dg6mg9heppis5y9iynaetdsdws.jpg
on this above image -
- i cannot expans "show options?
- i cannot see settings dropdown in the top right hand corner
all this works in firefox. stopped working in safari.
i have safari 4.0.3 installed.
10.6.1 OS.
anybody else have this problem?
found a solution?

strangely enough, dropdowns on maps search page works.
i am totally lost as to why this could be happening.
i have glims-beta for safari 64bit installed. could it be due to glims?

Similar Messages

Flickr pages and Google search result pages are smaller

When I go to a Flickr page or a Google search result page, the entire page is smaller. Content is the same, but the fonts and images are smaller.

To start with, try pressing holding down Ctrl and then pressing 0 ( Zero). That will reset your zoom if you have zoomed out.

Google search results page is not showing the full (green) http link

google search results page is not showing the full (green) http link

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
You can also check for problems caused by extensions.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can do a check for corrupted and duplicate fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

Certificate error pops up from Google search results page

Hi,
I wanted to find out more info about a certain company, so I typed the name on Google. When I clicked on Search (not I'm feeling lucky!) the search results appeared, but I immediately got a pop-up saying the certificate for the website of the company in question was not valid:
"Secure Connection Failed
www.mvfaccount.com:443 uses an invalid security certificate.
The certificate is not trusted because the issuer certificate is unknown.
(Error code: sec_error_unknown_issuer)
This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past the error may be temporary and you can try again later."
But the thing is: I hadn't even clicked on that search result! The warning appeared while the search results page was loading.
I find that unsettling because it makes me wonder: does Firefox visit the websites before I visit them?
And before you ask: no, I'm not a customer of that company (Maple Valley Financial) nor did I ever visit them before.
Thanks,
Sergio
== URL of affected sites ==
http://www.google.ca/search?source=ig&hl=en&rlz=1G1ACAW_ENCA389&=&q=maple+valley+financial&aq=f&aqi=g1&aql=&oq=&gs_rfai

I'm not sure how this could be a Firefox setting, but I would try the "usual" first:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference? If that helps, it could be that you selected to block that element in one of your add-ons.

Google search result page jumps back to top when opening a result in a new tab

hello
when searching from www.google.com, using 100 search results per page.
i will scroll down the page, find a hit worth looking at, right click on it to open it in a new tab, and then immediately the search result page will jump back to the top.
whereupon i will have to again scroll down to where i was to look a subsequent search results :-(

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can't read Google search results page - no zoom

I can't remember if it was always this way or not. - but the old two finger zoom trick doesn't work
is there anyway to zoom Google search results on iPhones
Im having to use mag glass - and I have 20/20 vision

You're wrong and I'll tell you why. All handset companies like Palm have relations with Google, i.e. they have to work together to create a local Google Maps program.
But the big reason why you are wrong is Palm made this device a web based phone and from the get go made all aspects of the phone able to sync to all things Google. Google has no obligation to do anything for WebOS users but Palm does and should use their relationship with Google to make sure things work for us or provide a solution of their own.

The address bar used to take me DIRECTLY to a site when i typed one word (facebook, twitter, etc), now it takes me to a google search results page instead. How do I fix this?

The URL bar used to work almost as an "I'm Feeling Lucky" search, and take me directly to the website. For example, I would type in "facebook" and it would go right to facebook.com, or "twitter" and it would go right to twitter.com.
Now it goes to a google results page and i have to take the extra step by clicking on the top result, instead of firefox taking me right there.
I thought this was a feature, but since i upgraded to the newest version of firefox, i can't find it in the settings anywhere and i'm not exactly sure what it's called.

The URL bar used to work almost as an "I'm Feeling Lucky" search, and take me directly to the website. For example, I would type in "facebook" and it would go right to facebook.com, or "twitter" and it would go right to twitter.com.
Now it goes to a google results page and i have to take the extra step by clicking on the top result, instead of firefox taking me right there.
I thought this was a feature, but since i upgraded to the newest version of firefox, i can't find it in the settings anywhere and i'm not exactly sure what it's called.

Map does not show in google search results page

Normally when I searched for a type of business on google, a small map showed up beside the search results. Unfortunately, I did something weird on my mousepad that froze my computer and after reboot, the map box was gone. And even more unfortunately, I use the silly sync function so now, none of my comps are getting the map.
Is there a way to get the little mappy box back, or am I forever doomed?

I'm not sure how this could be a Firefox setting, but I would try the "usual" first:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference? If that helps, it could be that you selected to block that element in one of your add-ons.

I am unable to view thumbail images in google search results page

When performing a search on Google I am unable to view thumbnails on the main search page. If I click on the placeholder the image will open, I am also able to view thumbnails on the images / videos results page.
Firefox version 3.6.13
Running Windows 7, 32 bit professional.
Addons: Adblock Plus
Flashblock
Googlehancer (used to prevent autocomplete.)
Web of Trust (WOT)
All addons updated today.
Cleared cache, cleared history, cleared cookies.
Able to view results thumbnails on Bing and other search providers.
Tools > Content > Load Images checked, exceptions are cleared, so all sites should be available.
Tools > Content > Enable Javascript also checked.
I suspect, though cannot be sure, that something I did to disable the forced autocomplete function in Google searches also disabled the thumbnail view.

If you use extensions (Tools > Add-ons > Extension) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
See also http://kb.mozillazine.org/Images_or_animations_do_not_load

Stop Firefox from reverting back to Google Search Results when opening a page from results list

When I click on one of the results from a Google search, I have it open the page in a new window. The page opens in the new window just fine, but instead of letting me view the page in the new window, Firefox takes me back to the Google Search results page. I am able to click on the new window and view the page that I chose, but it gets old being sent back to the search results each time I click on one of them and attempt to view it.
This happens on my work PC, home laptop, and my desktop at home as well. I have different versions running on each machine, and home laptop has the latest version of Firefox. I have searched the web and cannot find anyone having this same problem, much less a resolution, so I will ask here.
I hope this makes sense, if more info is needed please let me know.
Thanks to anyone that can help.

One reason for this can be if the new window contains Flash media, but Flash hasn't been used for several minutes, the Adobe protected mode feature changes the order of the windows. This is a bug that Adobe has yet to fix. This thread describes the problem in more details and lists the known workarounds: [https://support.mozilla.org/questions/955659 Opening New Windows and Shockwave Flash].
If you rule out the Flash issue, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

Search result Page throw Error for anonymous User

We have claim base WebApplication in SharePoint 2013. Every thing is working fine and user can login site without any problem. Only search result page not working..its given "Sorry, something went wrong "
From ULS Log I found below exception
CoreResultsWebPart::OnInit: Exception initializing: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri)
at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress address, Uri via)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.GetChannel(Uri address, Int32 timeoutInMilliseconds)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.DoSpLoadBalancedUriWsOp[T](WebServiceBackedOperation`1 webServiceCall, Int32 timeoutInMilliseconds, Int32 wcfTimeoutInMilliseconds, String operationName)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.DoWebServiceBackedOperation[T](String operationName, Int32 timeoutInMilliseconds, Int32 wcfTimeoutInMilliseconds, WebServiceBackedOperation`1 webServiceCall)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.DoWebServiceBackedOperation[T](String operationName, WebServiceBackedOperation`1 webServiceCall)
at Microsoft.Office.Server.Search.Query.ConsumerScopeCache.Refresh(IEnumerable`1 sharedScopes)
at Microsoft.Office.Server.Search.Query.ConsumerScopeCache.EnsureFresh()
at Microsoft.Office.Server.Search.Query.ConsumerScopeCache.TryGetScope(Int32 id, ScopeInformation& scope)
at Microsoft.Office.Server.Search.Query.ScopeCache.TryGetScope(Guid siteGuid, Int32 id, ScopeInformation& scope)
at Microsoft.Office.Server.Search.WebControls.SearchCommon.GetScopeNameByScopeID(Guid siteGuid, Int32 scopeID)
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e)
We are using Arabic Language Pack SharePoint 2013 on Windows server 2012 with SQL Server 2012.
anonymous access already given form Central Admin and Sitecollection level
Quick response will be highly Appreciated.

Its need to be set impersonate="true"
<authentication mode="Forms">
</authentication>
<identity impersonate="true"
/>
to resolve custom solution which need impersonate="false"
Run command in evaluated privilege...

My "What's New" procedure doesn't show the result Search result page

Hi,
I needed a "What's New" report for a content area. The advanced search screen has the option to query with the create date, but you can save the search with something like #sysdate-7. So I created the following procedure:
create or replace procedure whatsnew
(p_caid in number default 0
,p_folder_id in number default 1
,p_days in number default 7
) is
a_attribute_id portal30.wwsbr_type.array;
a_attribute_name portal30.wwsbr_type.array;
a_attribute_caid portal30.wwsbr_type.array;
a_attribute_data_type portal30.wwsbr_type.array;
a_attribute_operator portal30.wwsbr_type.array;
a_attribute_value portal30.wwsbr_type.array;
begin
a_attribute_id(1) := '10';
a_attribute_name(1) := 'createdate';
a_attribute_caid(1) := '0';
a_attribute_data_type(1) := 'date';
a_attribute_operator(1) := portal30.wwsbr_search_api.greater_than;
a_attribute_value(1) := to_char(sysdate-p_days);
portal30.wwsbr_search_api.submit_search
(p_search_terms => null
,p_caid => p_caid
,p_current_caid => p_caid
,p_folder_id => p_folder_id
,p_folder_caid => p_caid
,p_include_child_folders => portal30.wwsbr_search_api.yes
,p_attribute_id => a_attribute_id
,p_attribute_name => a_attribute_name
,p_attribute_caid => a_attribute_caid
,p_attribute_data_type => a_attribute_data_type
,p_attribute_operator => a_attribute_operator
,p_attribute_value => a_attribute_value
end;
Now you can call this from a dynamic page component (have it displayed as portlet), or include it as an URL item in the content area (/pls/portal30/portal30.whatsnew?p_caid=33&p_folder_id=1&p_days=7).
This work fine and show the search result. Now I've customized the Search Result Page, but it seems that wwsbr_search_api is navigating to a standard (fixed layout) search result screen (square item/folder links in stead of tabs) and not to my customized Search Result Page. If I click the submit button in the result screen then it navigates to my customized Search Result Page.
So why doesn't wwsbr_search_api navigate to the customized Search Result Page, or am I doing something wrong ?
Regards,
Willem-Pieter van der Lugt
Oracle Consulting NL

Hi,
I just saw topic http://technet.oracle.com:89/ubb/Forum82/HTML/000617.html with the answer pointing to bug 1869531.
regards,
Willem-Pieter van der Lugt

Google search and images not working since last night on my macbook air and iPad, how to fix?

Google search and images stopped working last night on my macbook air and the ipad. Any idea why or how to fix?

Restart the router.
Restart the computer.
Restart the iPad.
Best.

Google search results missing page index at bottom of results page

When doing a Google search, an index of search results pages normally shows up at the bottom of each results page.
Beginning yesterday, the index only showed up at the bottom of the first results page or not at all.
Works fine in Safari on same computer.

* "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

I have Google set to show results in a new window. When I click on a results page link Firefox reverts to search results page almost instantly

I have Google set to show results in a new window, never use Google instant & search filtering off. When I click on a link on the results page Firefox reverts to the search results page almost instantly. I can of course select the desired page (via windows Aero). This happens on several computers, PCs & Laptops.
Not a major problem but VERY irritating. This seems to have happened from a few update ago ?

This can be caused by corrupted cookies or cookies that aren't send or otherwise blocked.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

Dropdowns on google search results page stopped working. why?

Similar Messages

Maybe you are looking for