Droplet does not show cluster
I created a cluster in Qmaster (which I confirmed does work). I then created a droplet for a particular setting. When I hit submit in the droplet, the cluster does not show up as an option. I do have compressor open at the same time, to rule out the sharing being turned off.
Try an Apple TV setting and see if it shows.
Russ
Similar Messages
-
Virtual Cluster Does Not Show Up In Compressor
I have a clean install of Leopard and FCS2. All the updates completed and everything is running beautifully except that the Virtual Cluster I setup in Qmaster does not show up in Compressor as an option when submitting. The virtual cluster with 4 instances establishes itself and indicates that all services as 'Idle". The QuickCluster has the same name as the computer under "sharing" even though sharing is turned off. Services are seet as "Shared" not "Managed". Unfortunately, in Compressor the only option available is to render with "This computer". Any suggestions? Thanks, Jim
HI James, just quick suggestion from the airport lounge in Changi Singapore....
step1: using the usual procedure of RESETTING everything (compressor back ground tasks and system prefs/qmaster, option+click start (reset) and then *purging stuff for /var/spool/qmaste*r.... via the finder or trusty rm command.
*step 2:* that you use use QMASTER ADMINISTRATOR to create a cluster of controller and service node on your mac (*not a quick cluste*r).
Check that it is correctly established and 'APPLY' is.
TRy adding a batch to copressor and see if the new cluster appears and that you have the number of instances utilising the cores you specified.
lots of stuff on this forum on this.. just search
hth
w -
Node does not join cluster upon reboot
Hi Guys,
I have two servers [Sun Fire X4170] clustered together using Solaris cluster 3.3 for Oracle Database. They are connected to a shared storage which is Dell Equallogic [iSCSI]. Lately, I have ran into a weird kind of a problem where as both nodes come up fine and join the cluster upon reboot; however, when I reboot one of nodes then any of them does not join cluster and shows following errors:
This is happening on both the nodes [if I reboot only one node at a time]. But if I reboot both the nodes at the same time then they successfully join the cluster and everything runs fine.
Below is the output from one node which I rebooted and it did not join the cluster and puked out following errors. The other node is running fine will all the services.
In order to get out of this situation, I have to reboot both the nodes together.
# dmesg output #
Apr 23 17:37:03 srvhqon11 ixgbe: [ID 611667 kern.info] NOTICE: ixgbe2: link down
Apr 23 17:37:12 srvhqon11 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(5) unable to connect to target SENDTARGETS_DISCOVERY
Apr 23 17:37:12 srvhqon11 iscsi: [ID 114404 kern.notice] NOTICE: iscsi discovery failure - SendTargets (010.010.017.104)
Apr 23 17:37:13 srvhqon11 iscsi: [ID 240218 kern.notice] NOTICE: iscsi session(9) iqn.2001-05.com.equallogic:0-8a0906-96cf73708-ef30000005e50a1b-sblprdbk online
Apr 23 17:37:13 srvhqon11 scsi: [ID 583861 kern.info] sd11 at scsi_vhci0: unit-address g6090a0887073cf961b0ae505000030ef: g6090a0887073cf961b0ae505000030ef
Apr 23 17:37:13 srvhqon11 genunix: [ID 936769 kern.info] sd11 is /scsi_vhci/disk@g6090a0887073cf961b0ae505000030ef
Apr 23 17:37:13 srvhqon11 scsi: [ID 243001 kern.info] /scsi_vhci (scsi_vhci0):
Apr 23 17:37:13 srvhqon11 /scsi_vhci/disk@g6090a0887073cf961b0ae505000030ef (sd11): Command failed to complete (3) on path iscsi0/[email protected]:0-8a0906-96cf73708-ef30000005e50a1b-sblprdbk0001,0
Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 122153 daemon.warning] svc:/network/iscsi/initiator:default: Method or service exit timed out. Killing contract 41.
Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 636263 daemon.warning] svc:/network/iscsi/initiator:default: Method "/lib/svc/method/iscsid start" failed due to signal KILL.
Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 748625 daemon.error] network/iscsi/initiator:default failed repeatedly: transitioned to maintenance (see 'svcs -xv' for details)
Apr 24 14:50:16 srvhqon11 svc.startd[11]: [ID 694882 daemon.notice] instance svc:/system/console-login:default exited with status 1
root@srvhqon11 # svcs -xv
svc:/system/cluster/loaddid:default (Oracle Solaris Cluster loaddid)
State: offline since Tue Apr 23 17:46:54 2013
Reason: Start method is running.
See: http://sun.com/msg/SMF-8000-C4
See: /var/svc/log/system-cluster-loaddid:default.log
Impact: 49 dependent services are not running:
svc:/system/cluster/bootcluster:default
svc:/system/cluster/cl_execd:default
svc:/system/cluster/zc_cmd_log_replay:default
svc:/system/cluster/sc_zc_member:default
svc:/system/cluster/sc_rtreg_server:default
svc:/system/cluster/sc_ifconfig_server:default
svc:/system/cluster/initdid:default
svc:/system/cluster/globaldevices:default
svc:/system/cluster/gdevsync:default
svc:/milestone/multi-user:default
svc:/system/boot-config:default
svc:/system/cluster/cl-svc-enable:default
svc:/milestone/multi-user-server:default
svc:/application/autoreg:default
svc:/system/basicreg:default
svc:/system/zones:default
svc:/system/cluster/sc_zones:default
svc:/system/cluster/scprivipd:default
svc:/system/cluster/cl-svc-cluster-milestone:default
svc:/system/cluster/sc_svtag:default
svc:/system/cluster/sckeysync:default
svc:/system/cluster/rpc-fed:default
svc:/system/cluster/rgm-starter:default
svc:/application/management/common-agent-container-1:default
svc:/system/cluster/scsymon-srv:default
svc:/system/cluster/sc_syncsa_server:default
svc:/system/cluster/scslmclean:default
svc:/system/cluster/cznetd:default
svc:/system/cluster/scdpm:default
svc:/system/cluster/rpc-pmf:default
svc:/system/cluster/pnm:default
svc:/system/cluster/sc_pnm_proxy_server:default
svc:/system/cluster/cl-event:default
svc:/system/cluster/cl-eventlog:default
svc:/system/cluster/cl-ccra:default
svc:/system/cluster/ql_upgrade:default
svc:/system/cluster/mountgfs:default
svc:/system/cluster/clusterdata:default
svc:/system/cluster/ql_rgm:default
svc:/system/cluster/scqdm:default
svc:/application/stosreg:default
svc:/application/sthwreg:default
svc:/application/graphical-login/cde-login:default
svc:/application/cde-printinfo:default
svc:/system/cluster/scvxinstall:default
svc:/system/cluster/sc_failfast:default
svc:/system/cluster/clexecd:default
svc:/system/cluster/sc_pmmd:default
svc:/system/cluster/clevent_listenerd:default
svc:/application/print/server:default (LP print server)
State: disabled since Tue Apr 23 17:36:44 2013
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
svc:/application/print/rfc1179:default
svc:/application/print/ipp-listener:default
svc:/network/iscsi/initiator:default (?)
State: maintenance since Tue Apr 23 17:46:54 2013
Reason: Restarting too quickly.
See: http://sun.com/msg/SMF-8000-L5
See: /var/svc/log/network-iscsi-initiator:default.log
Impact: This service is not running.
######## Cluster Status from working node ############
root@srvhqon10 # cluster status
=== Cluster Nodes ===
--- Node Status ---
Node Name Status
srvhqon10 Online
srvhqon11 Offline
=== Cluster Transport Paths ===
Endpoint1 Endpoint2 Status
srvhqon10:igb3 srvhqon11:igb3 faulted
srvhqon10:igb2 srvhqon11:igb2 faulted
=== Cluster Quorum ===
--- Quorum Votes Summary from (latest node reconfiguration) ---
Needed Present Possible
2 2 3
--- Quorum Votes by Node (current status) ---
Node Name Present Possible Status
srvhqon10 1 1 Online
srvhqon11 0 1 Offline
--- Quorum Votes by Device (current status) ---
Device Name Present Possible Status
d2 1 1 Online
=== Cluster Device Groups ===
--- Device Group Status ---
Device Group Name Primary Secondary Status
--- Spare, Inactive, and In Transition Nodes ---
Device Group Name Spare Nodes Inactive Nodes In Transistion Nodes
--- Multi-owner Device Group Status ---
Device Group Name Node Name Status
=== Cluster Resource Groups ===
Group Name Node Name Suspended State
ora-rg srvhqon10 No Online
srvhqon11 No Offline
nfs-rg srvhqon10 No Online
srvhqon11 No Offline
backup-rg srvhqon10 No Online
srvhqon11 No Offline
=== Cluster Resources ===
Resource Name Node Name State Status Message
ora-listener srvhqon10 Online Online
srvhqon11 Offline Offline
ora-server srvhqon10 Online Online
srvhqon11 Offline Offline
ora-stor srvhqon10 Online Online
srvhqon11 Offline Offline
ora-lh srvhqon10 Online Online - LogicalHostname online.
srvhqon11 Offline Offline
nfs-rs srvhqon10 Online Online - Service is online.
srvhqon11 Offline Offline
nfs-stor-rs srvhqon10 Online Online
srvhqon11 Offline Offline
nfs-lh-rs srvhqon10 Online Online - LogicalHostname online.
srvhqon11 Offline Offline
backup-stor srvhqon10 Online Online
srvhqon11 Offline Offline
cluster: (C383355) No response from daemon on node "srvhqon11".
=== Cluster DID Devices ===
Device Instance Node Status
/dev/did/rdsk/d1 srvhqon10 Ok
/dev/did/rdsk/d2 srvhqon10 Ok
srvhqon11 Unknown
/dev/did/rdsk/d3 srvhqon10 Ok
srvhqon11 Unknown
/dev/did/rdsk/d4 srvhqon10 Ok
/dev/did/rdsk/d5 srvhqon10 Fail
srvhqon11 Unknown
/dev/did/rdsk/d6 srvhqon11 Unknown
/dev/did/rdsk/d7 srvhqon11 Unknown
/dev/did/rdsk/d8 srvhqon10 Ok
srvhqon11 Unknown
/dev/did/rdsk/d9 srvhqon10 Ok
srvhqon11 Unknown
=== Zone Clusters ===
--- Zone Cluster Status ---
Name Node Name Zone HostName Status Zone Status
Regards.check if your global devices are mounted properly
#cat /etc/mnttab | grep -i global
check if proper entries are there on both systems
#cat /etc/vfstab | grep -i global
give output for quoram devices .
#scstat -q
or
#clquorum list -v
also check why your scsi initiator service is going offline unexpectedly
#vi /var/svc/log/network-iscsi-initiator:default.log -
UOI does not show nodes screen in RAC installation
Oracle 9.2.0.4 on Red Hat Linux AS 2.1.
I have configured the rsh and rcp services on both nodes and configured and tested the public and private networks.
I installed the Cluster Manager first. Then I have downloaded and started the hangcheck-timer form O.S. I have configured and started the ocmstart.sh script.
But when try to install the rdbms the OUI does not show the Nodes screen.
What am I doing wrong?Well, then just check the master data setting in Query designer--> choose 0Costcenter and check the properties > choose advanced tab> under filter value Selection during Query Execution . check for these options
1.Only Posted Values for Navigation
2.Only values in Infoprovider
3.Values in Master data table
4.Characterstic Relationship.
You need to choose the 3rd opitions as you need to read the master tables for 0costcenter.
Hope it helps,
Cheers,
Balaji -
I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks
Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732
-
How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
Are the files lost forever or can i recover them by going to a shop or using a software?Thank you for responding.
This might sound stupid since i'm not really knowledgeable with Macs,
but since all my files were moved from my mac computer to the external hard drive,
is it possible to recover those files through my Mac - like recovering deleted files? -
Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??
Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:
-
Field Explorer in Crystal Reports does not show the same names as Bex Query
Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advanceHi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo -
Adobe Creative Cloud does not show all my apps as registered.
Adobe Creative Cloud properly shows my Adobe Photoshop CS6 as registered. However, it does not show my Adobe Acrobat XI Pro, or my Adobe Photoshop Lightroom 4.4 as registered. How can I get these programs to be properly registerd as "MY APPS" in Adobe Creative Cloud? I am running Windows 8 and have had photoshop for a number of years. I installed Acrobat XI Pro in December, but it has never been recognized in Adobe Creative Cloud as registered.
Hey Pete,
I'm not sure why Acrobat XI is not recognized. It is on my system. Maybe try uninstalling and reinstalling it.
You can uninstall through the OS
Control Panel > Programs & Features
and then reinstall it through the Creative Cloud app or https://creative.adobe.com/products -
I subscribed to Creative Cloud for teams and LR does not show in AAM.
I have a licensed copy of LR4.4 installed along with CS6. Howeveer LR does not show in AAM and cannot be accessed. Please advise to solution.
Whaleybird1958 which operating system are you using? Please make sure you meet or exceed the system requirements listed at http://www.adobe.com/products/photoshop-lightroom/tech-specs.html.
-
Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6
Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG
-
How do I delete voice memos from my phone? It does not show in the app or in iTunes. Thanks
Welcome to the Apple Community.
Settings > Music > Show all music > Off -
IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!
It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes
-
I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?
iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.
-
Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?
To my knowledge, I've only seen this for imessage only and not SMS.
The other users would need to have send read receipts enabled on their phone.
Maybe you are looking for
-
Discoverer Reports with Portal- Report in Memory
Hi- I have Discover reports on a dashboard looking portal page. I use page parameters to populate the reports. The thing is, when I navigate to that page after I log in, the last report I generated on the last login is still up and the parameters don
-
Moving Oracle 9i database from AIX server to Sun Solaris 9 server
I want to move my oracle 9i database residing on AIX server to Sun Solaris 9 server. The database residing on AIX server has the following features :- 1. It is a production database. 2. Running in NOARCHIVE LOG Mode. 3. It was Live for few weeks, hen
-
Error in Simple mx Component Styling?
Like many, I am finding the behavior of CSS namespaces in Flex 4 very frustrating. I have a very simple example which is not working. I hope I'm missing something! I have a SWC with a defaults.css file. The CSS file is setting the style for Alert usi
-
Can't move playlists in iTunes 11.1 - wrong ones get moved
I'm trying to drag playlists between folders in the latest iTunes for the latest Lion but the wrong playlist ends up being moved. I didn't select it. Really weird. How do I fix this?
-
LOV in the Query Panel is not Working
Hi Everyone, I dont see the LOV working in the Query Panel but it works in the table region, I am able to open the LOV and search some value and when i say ok it wont return any value... Do anyone have idea on that? Thanks