Droplets don't work in OS X 10.6!!!

Honestly Adobe, this is inexcusable! Work it out with Apple and make my droplets work again. This is very problematic for my work flow. Oh, and they don't work even if I'm running PS CS4 in Rosetta. There is no way to make the individual droplet run in Rosetta. Y'all can't do your same old song and dance about not updating or fixing this issue like you do with old versions of Adobe products because droplets don't work in CS4 products, which if you didn't know is your current version!! This is a known issue and no loyal Adobe customer should be content with..."it simply doesn't work, oh well." Which, is exactly the impression I am getting from your response in tech support.
http://kb2.adobe.com/cps/510/cpsid_51093.html
And by the way, Apple was using Intel before 10.6. So your reasoning is way off, not to mention your so-called solution doesn't work either. Bottom line: Fix it.

I'm sorry, but I shouldn't have to go back to 10.5.8 to get features of my app to work. All other apps work fine using Rosetta. But, not droplets in PS, even when I'm running it under Rosetta. Apple has made updates to 10.6 to address problems with Adobe products, namely issues with saving, printing etc. Surely they didn't do this without some collaboration with Adobe? Am I going to have to wait for CS5 before droplets and other such features work in 10.6? I'd gladly take the issue up with Apple, but they'd tell me that it isn't their product and to contact Adobe, which is more or less the case here. Unless Adobe has CS5 coming out in the next couple of months isn't it reasonable to suggest that Adobe work with Apple to correct some of these issues? Perhaps Adobe could discover why droplets don't work in Rosetta, which would essentially be the same as reverting back to 10.5.8 for the specific app. I understand very well how updates of any kind can cause issues. But a lack of effort to remedy these issues by either party involved is simply not fair. "Oh well" just isn't acceptable anymore. If Adobe or Apple made a noticeable effort and still failed to correct the issues, then fine. Some things can't be fixed. However, I suspect that in this case the issues have been given little attention.

Similar Messages

Droplets don't work

I use a new computer for a few months now and I re-created a number of droplets from photoshop cs4 to use them on this computer (old cum
puter was Windows XP, new computer is Windows 7).
On my new computer the droplets don't work, When I drop a file onto a droplet, Photoshop opens, and then nothing happens.
Browser: Microsoft IE
Operating System: Windows 7

I was hoping for a better reply to the droplet issue. I also have W7 and Photoshop CS4 and cannot get a droplet to work. My actions work properly, but when I use a droplet, the only thing that happens is the Photoshop button blinks on the W7 bottom toolbar.
I am also not finding much out there about solutions to this issue on Adobe's site and Google.
Please post something here or link to another thread if someone has found a solution to this issue.
Thank you.

Photoshop droplets don't work after file.copy();

I wrote a script to backup all of my files in a directory, like this
fileObj = File('~/Desktop/Vendor Swatches.app');
fileObj.copy('~/Desktop/BACKUP/' + fileObj.name);
I noticed that when it copies my Photoshop Droplets, they no longer work. If you look at the attached image, you can see the file before and after copying. The end file is also listed as "Application (Classic)". Does anybody know why this is happening? Or any way to prevent it?
thanks!

I don't use File.copy() myself it creates a 'NEW' file which makes it pretty useless to me. My Retrospect back-ups would be never ending. It looks like form your images you are making a copy across from mounted server? From a personal point of view I would have the system do the copy/moving of files… Here are a few functions that may be of use to you… Copying files/folders you could do this with the shells 'cp' or 'ditto'
Using cp…
#target photoshop
var source = Folder.selectDialog('Select a Folder to Copy from?');
var dest = Folder.selectDialog('Select a Folder to Copy to?');
if (source != null && dest != null) {
     var res = cpFiles(source, dest);
     alert(res);
function cpFiles(sf,df) {
     var comm = 'cp ';
     var optns = '-R ';
     var sPath = "'" + sf.fsName + "/' ";
     var dPath = "'" + df.fsName + "'";
     var sh = comm + optns + sPath + dPath;
     var res = undefined;
     var sh = app.system(sh);
     !sh ? res = true : res = false;
     return res;
And much the same using ditto…
#target photoshop
var source = Folder.selectDialog('Select a Folder to Copy from?');
var dest = Folder.selectDialog('Select a Folder to Copy to?');
if (source != null && dest != null) {
     var res = dittoFiles(source, dest);
     alert(res);
function dittoFiles(sf,df) {
     var comm = 'ditto ';
     var optns = '';
     var sPath = "'" + sf.fsName + "/' ";
     var dPath = "'" + df.fsName + "'";
     var sh = comm + optns + sPath + dPath;
     var res = undefined;
     var sh = app.system(sh);
     !sh ? res = true : res = false;
     return res;
And as you mentioned back-up… here are a few things you could use before/after your process to store/back-up whichever…
ZIP a folder…
#target photoshop
var source = Folder.selectDialog('Select a Folder to create ZIP From?');
if (source != null) {
     var res = makeZIP(source);
     alert(res);
function makeZIP(sf) {
     var comm = '/usr/bin/ditto ';
     // These should be default after 10.4 Tiger?
     var optns = '-c -k -rsrc --keepParent ';
     var sPath = "'" + sf.fsName + "' ";
     var dPath = "'" + sf.fsName + '.zip' + "'";
     var sh = comm + optns + sPath + dPath;
     var res = undefined;
     var sh = app.system(sh);
     !sh ? res = true : res = false;
     return res;
Disk Image a folder…
#target photoshop
var source = Folder.selectDialog('Select a Folder to create Disk Image From?');
if (source != null) {
     var res = makeDiskImage(source);
     alert(res);
function makeDiskImage(sf) {
     var comm = 'hdiutil create ';
     var optns = '-srcfolder ';
     var sPath = "'" + sf.fsName + "' ";
     var dPath = "'" + sf.fsName + '.dmg' + "'";
     var sh = comm + optns + sPath + dPath;
     var res = undefined;
     var sh = app.system(sh);
     !sh ? res = true : res = false;
     return res;
And lastly TAR Archive a folder…
#target photoshop
var source = Folder.selectDialog('Select a Folder to create TAR Archive From?');
if (source != null) {
     var res = makeTAR(source);
     alert(res);
function makeTAR(sf) {
     var comm = '/usr/bin/tar ';
     var optns = 'cjvf ';
     var dPath = "'" + sf.fsName + '.tbz' + "' ";
     var sPath = "'" + sf.fsName + "'";
     var sh = comm + optns + dPath + sPath;
     var res = undefined;
     var sh = app.system(sh);
     !sh ? res = true : res = false;
     return res;
They are for 'mac' and all expect a folder object or two…

Js ctrlKey or metaKey don't work in OS X in click event

When checking for ctrlKey and metaKey in click event, I always get false. Photoshop CC 2014

I'm sorry, but I shouldn't have to go back to 10.5.8 to get features of my app to work. All other apps work fine using Rosetta. But, not droplets in PS, even when I'm running it under Rosetta. Apple has made updates to 10.6 to address problems with Adobe products, namely issues with saving, printing etc. Surely they didn't do this without some collaboration with Adobe? Am I going to have to wait for CS5 before droplets and other such features work in 10.6? I'd gladly take the issue up with Apple, but they'd tell me that it isn't their product and to contact Adobe, which is more or less the case here. Unless Adobe has CS5 coming out in the next couple of months isn't it reasonable to suggest that Adobe work with Apple to correct some of these issues? Perhaps Adobe could discover why droplets don't work in Rosetta, which would essentially be the same as reverting back to 10.5.8 for the specific app. I understand very well how updates of any kind can cause issues. But a lack of effort to remedy these issues by either party involved is simply not fair. "Oh well" just isn't acceptable anymore. If Adobe or Apple made a noticeable effort and still failed to correct the issues, then fine. Some things can't be fixed. However, I suspect that in this case the issues have been given little attention.

Adobe After Effects CC don't work in OS X version 10.9

Why I can’t use the application “Adobe After Effects CC 12.0” with this version of OS X Maverick?

I'm sorry, but I shouldn't have to go back to 10.5.8 to get features of my app to work. All other apps work fine using Rosetta. But, not droplets in PS, even when I'm running it under Rosetta. Apple has made updates to 10.6 to address problems with Adobe products, namely issues with saving, printing etc. Surely they didn't do this without some collaboration with Adobe? Am I going to have to wait for CS5 before droplets and other such features work in 10.6? I'd gladly take the issue up with Apple, but they'd tell me that it isn't their product and to contact Adobe, which is more or less the case here. Unless Adobe has CS5 coming out in the next couple of months isn't it reasonable to suggest that Adobe work with Apple to correct some of these issues? Perhaps Adobe could discover why droplets don't work in Rosetta, which would essentially be the same as reverting back to 10.5.8 for the specific app. I understand very well how updates of any kind can cause issues. But a lack of effort to remedy these issues by either party involved is simply not fair. "Oh well" just isn't acceptable anymore. If Adobe or Apple made a noticeable effort and still failed to correct the issues, then fine. Some things can't be fixed. However, I suspect that in this case the issues have been given little attention.

Droplet won't work

I've created this droplet before but had a hard drive crash and tried to re-make it but this time it doesn't work.
Machine Windows Vista Ultimate 64. Action: Save, Close
I've tried to do Action: Save As, Close. but that doesn't work neither. I get error stating that Droplet has quite working.
This is the premise of the droplet.
I need to convert a folder of files that have "auto rotation" applied within the camera. Since this is just a metadata command to rotate, the images remain horizontal in applications that don't read metadata. Secondly, once the droplet has been applied, the jpg compression window never opens again in future workflow. I shoot wirelessly and they pass through the droplet on the way into the storage. I've tried every combination to get it to work. I've tried "save as" and then suppress "save as" in the droplet as well.

It could be that Compressor isn't able to recognize the codec inside the AVI file. Can you open the AVI file in Quicktime and open the "Get Info" window and post the specific codec information?

"Enable Swipe" don't work and Tablet Layout on a Smartphone

Hi there,
I have two big problems with my own site www.mhgrafikdesign.de:
1. I have different slideshows in my tablet version of my site. I created the slideshow before one of the updates with the feature "Enable swipe" came out. However, it worked well on my Samsung Galaxy Tab 10.1n. Now I have a Microsoft Surface and it's not working anymore although "Enable Swipe" is enabled. I don't know if the Microsoft Surface has problems with the slideshow or one of the updates has "damaged" my slideshow. Please help me! Any ideas?
2. I have a HTC 8S smartphone and if I type www.mhgrafikdesign.de my smartphone always show me the tablet version. Any idea why? P.S. Swiping there is also not possible.
Many thanks for quick help. My website is my flagship in the web and it's a little bit embarrassing if my slideshow on the tab don't work... = /

This is now a slideshow created with Muse: Homepage
The slideshow uses fullscreen mode and was build with the latest version of Muse. On my Win8-Tablet, it is not working. I tested this with the IE11 in desktop- and in modern-ui-mode.
Next to this problem, I also run into these things:
1. Using the buttons to go forward and backward in the slideshow will select the text-arrow inside the button when touched.
2. Clicking the forward- and backward-button behaves different. Windows Desktop -> slideshow does not roll back, so you can click forever in one direction, no feedback that you reached the end. On iOS -> slideshow will be rolled back and you get the visual feedback to start over again.
3. Zoom into the fullscreen-slideshow will result in strange and not really controllabel behaviour. Zooming in does not allow to pan.
But I am not talking only about the phones. It is more about windows tablets in general. So, content can be viewed in the InternetExplorer11 in desktop-mode and also in modern-UI-mode (touch does work in both modes). But it is also possible, that people use other browsers like Firefox and Chrome. I think, it would be a quite a good idea to translate the movement of the mousepointer into gestures. This javascript library shows what I think is a good aproach: Hammer.JS - Hammer.js

Adobe Flash & Javascript don't work even though Enabled

Ever since what I think was either a Firefox upgrade (I don't know which one) or installation of Quicktime, my Adobe Flash Plugin is perpetually crashed and I cannot play any Flash content on any website. All that displays in place of the video is a gray screen with the sad-face Lego icon and the message: “The Adobe Flash Plugin has crashed. Please reload the page to try again.” (See attached image.) But it will not resolve when reloaded.
No Flash videos on any sites work. HTML5 videos work on YouTube when tested, but non-HTML5 videos won't work.
Also, my Javascript does not seem to be working since at least some displays requiring javascript don't work. Sometimes the display just doesn't work, and sometimes I get a message that javascript is disabled and must be enabled, but it is already enabled (set to “true” in about:config).
I have spent days scouring every help forum entry I can find on troubleshooting Flash Player and Javascript. Everything on my end seems to be in order and I cannot find or fix either problem. I think it is possible the issue could have its roots in the fact that Javascript seems to not be working which may be preventing Flash Player content from working...??
Also, Flash content does work in I.E. but not in Firefox (I do not have Chrome installed so did not test in Chrome). I have too many window tabs open in Firefox and can't switch to I.E. (nor do I like to use I.E.).
PLEASE HELP as this is crippling for very important work deadlines I have.
This is what else I know and have tried:
I have a Toshiba Satellite C75D-A Laptop;
Processor: AMD A6-5200 APU with Radeon HD Graphics; x64; 2.00 Ghz;
RAM: 8 MB;
OS: 64-bit system; Windows 8.1 (but some auto-check utilities detect it as 8.0 because it was upgraded.);
Graphics Card: “Desktop Graphics” System – AMD Radeon HD 8400 (0x9830);
Installed Graphics Driver Version: AMD 13.352.1004.1007 (Driver Date: 4/22/2014)
My Device Manager graphics driver updater states: “driver software is up to date.”
From the AMD website: the graphics driver auto-detect utility recommended the AMD Catalyst Driver (amd-catalyst-omega-14.12-without-dotnet45-win8.1-64bit.exe) I tried installing this driver, but it won't install. After trying to install, I got a message stating: “We are unable to find a driver for your system.” But Device Manager states I have a current driver, and my graphics card & driver seem to be working fine, so I do not believe this is part of the issue.
I am using Latest Firefox version 35.0.1; and
Using Latest Flash Player: 32-bit NPAPI Plug-in Version: 16.0.0.296; designated: “always activate” (Downloaded new update several times, including fresh install after uninstall; system & web address icons indicate Flash is enabled).
I turned off hardware acceleration in FF Tools>Options>Advanced>General
I disabled WebGL as explained here: https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration
I am using Ad-Block Plus which has never affected things in the past. I have not tried starting FF in Safe Mode because I believe I will lose all open tabs and not be able to recover them (I may have over 200 open). But disabling add-ons has no effect (I disabled all except for Sessions Manager in case of a crash). (My No-Script has been disabled for at least six months.)
I have Windows Media Player and Quicktime installed.
Quicktime is most recent upgrade (7.7.6) so should not be a problem according to:
“QuickTime plugin takes over Flash” at:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here)
Disabling Quicktime had no effect in the prior version of FF (ver. 35.0), but in latest FF ver. 35.0.1, Flash videos only display a plain (blank) gray screen instead of the sad-faced icon and crash message.
(I tried to uninstall Quicktime altogether, but was not able to due to Error codes 2502 & 2503. I tried troubleshooting that as well with no luck using methods successful for other programs, including here:
http://www.fixkb.com/2014/01/error-2503-and-2502-when-uninstalling-on-windows-8.html;
& here:
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/re-internal-error-codes-2502-and-2503-for/ba5f2145-aa6e-4cc0-81a7-e4346f43b698.)
Disabling my FF theme and using the default brought back the sad-faced icon and crash message in the place of videos on some YouTube pages, but not other YouTube pages (where video was still blank gray screen). It also enabled a still Flash image (an ad) to display on a different website page that previously had a Flash Plugin crash message. I have been using this same theme for a couple of years without previous issue. While turning it off did generate an effect on some still imagery, it didn't fix the video problem.
I tried Disabling Protected Mode in Flash 11.3 as explained here:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here).
It did not solve the issue.
I also deleted all storage & data in Flash Player as advised. This had no effect either.
I've tried all solutions I've been able to find and am at a loss for what to try next. Please help and advise ASAP. Thank you!!

''guigs2 [[#answer-684038|said]]''
<blockquote>
I truely admire the efforts that have been made to make this work.
"“We are unable to find a driver for your system.” "
For it not installing, you need to follow these instructions to install them: see the comments: [http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/windows-10-atiamd-display-drivers/50944d10-dde3-4e08-8244-d54eb2b1e7de] --> take warning though it looks like it has caused issues for others as well.
Since it was working for some youtube videos and not others, there might be an issue with a particular video codec. DO you have OpenH264 Video Codec provided by Cisco Systems, Inc. plugin?
Is it possible to try Safe Mode after saving your session with [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager Addon]? IT would test hardware acceleration in Firefox.
</blockquote>
Thank you, guigs2! Sorry for my delayed reply...I didn't realize I hadn't gotten back to you. Update is that I did try a whole slew of other troubleshooting steps including starting FF in safe mode, to no avail. However, I was FINALLY (after months) able to solve this problem just today by pure chance!
The problem was that hardware acceleration was enabled in the Flash settings. I had not been able to turn it off because I didn't have access to the Flash Player settings as long as the crash error message was visible, which was all the time! Today, by a sheer fluke, I saw a static picture in place of the crash message on a Flash video. I snagged the opportunity to call up the settings and turn off hardware acceleration, and it fixed the problem for my whole browser! This has been a frustrating issue because I did not have access to the settings utility as long as I had the crash message, which was always, so my Flash was crippled without the ability for me to fix it until pure luck gave me this window of opportunity.
Does anyone know another way to access the settings utility if this ever happens again in the future? I could not find a way. (Incidentally, I had tried disabling hardware acceleration via my graphics driver settings, but it didn't fix the problem.) We need Adobe to allow some other way to access the Flash Player settings utility when this problem arises since they aren't accessible when there is a static crash message.
Thanks again!

IPod Touch: apps (facebook, twitter, facetime) don't work properly with my wireless internet having worked perfectly before. Help needed!

I got my iPod Touch 4g for Christmas 2011 and for the first 2 weeks everything worked fine - I could download apps; use apps to their full potential; use FaceTime; use everything.
But after the two weeks, the iPod decided to no longer work as well as it had promised. First of all, it would take more than 2 hours to download a single app from the app store and then, straight after that, I couldn't connect to FaceTime (it had worked perfectly before). Then, finally, to top it all off - Facebook and Twitter stopped working on occasions. For example, I couldn't post/send messages or photos on Twitter and at the majority of the time, the News Feeds wouldn't load.
Sometimes everything works but most of the time it doesn't. I've tried my iPod at every time of the day and it makes no difference - nothing still works! Also, I don't think it is the fault of my wireless internet because I've had an iPod touch before and it worked perfectly, and the laptop that I am writing this question on also works perfectly with wifi.
The weird thing is that I have used my iPod to its full potential (everything worked fine) at my friends hosue on multiple occasions - using his wifi. I am really lost for ideas for what to do - I have uninstalled all the apps that don't work with the internet (facebook, twitter) and have always made sure that I have closed apps after using them, so that my iPod wouldn't run slow.
My iPod has been like this for over a month now, help would be appreciated

Do you have a blackberry data plan active. On your account? You need an active blackberry data plan to use the majority of data functions on your phone, even if you are connected to wifi

TV don't work with OSX Server software?

Everything worked great BEFORE I updated our MacMini Intel to OSX Server software, now iTunes can't find the recent found Apple TV. And therefore the connection is gone and the syncing don't work anymore.
Any work-around or suggestions on how to solve this?
Or do I have to revert to previus userversion of OSX to make it work again?
Is there a limitation built into OSX Server software or is there maybe some kind of firewall / preferences etc that needs to be adjusted? (The built in firewall has been disconnected.)
FYI:
All apps are up to date. The Mac Mini + Apple TV is on my local network at home and I'm trying to make it my family's digital hub for all family-related media.
MacBook Pro CD2 & X-servers Mac OS X (10.4.9)
MacBook Pro CD2 & X-servers Mac OS X (10.4.9)

1) I've not tried to reset ATV from scratch. But it works fine on other Mac's on the network (sharing).
2) Security options, yes I belive so to. I've followed all instructions and opened all ports I've seen mentioned i apples Knowledge database / support. Still don't work. Maybe I've missed some ports...
3) YES! It works fine sharing the MacMinis lib over the network.
4) Today I also tried to reinstall iTunes. But no luck.
Any mor suggestions anyone? Thx
I really wanny solve this, otherwhise my ATV is pretty useless for me...

Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

Hi there
I'll pass your details to our Russian team and they'll contact you to assist further.
Kind regards
Bev

Bookmarks exist but don't work in PDF (exported from InDesign)

Hi all,
I had a similar problem a few months ago where SOME cross-references within a document weren't taking you to the right place when exported to PDF although they appeared to work fine in InDesign (the "source" and "destination" arrows took you to the right place). Someone suggested exporting the file to IDML and importing again, which worked fine.
Now I'm working on the same document (an update) but it's grown a bit and so each chapter is in its own file within a book. Problem is similar but not the same. Some cross-references work fine in the generated PDF, others are recognised as being links (cursor changes) but NO effect when clicking on them... not taking me to the wrong place, nothing is happening at all. ALSO the table of contents AND the bookmarks don't work.
I've exported each chapter to IDML, recreated the InDesign files and recreated the book, but still no joy. If all else fails, I'll put the book back into a single file but I'd rather not go through this pain each time I have to update the book (especially as this latest change was really tiny).
Any suggestions? Are cross-references between files in a book known to be problematic? And if they are, has the problem been addressed for CS5.5? (I'm looking to use InDesign for a journal that will contain a lot of links between elements, but the turnaround time is tight and I'm wary of this issue being a problem each month.)
Currently using CS5 on Windows 7 Professional, and Acrobat 9 Pro Extended was installed as part of the Tech Comm Suite.
Thanks in advance,
Alison

This is so funny...I was just about to close my email and look up the
Forums to profusely thank the person who posted the solution to a similar
problem I was having in CS4. I'd created numerous hyperlinks in Indesign
documents and sometimes the links worked in a pdf, and sometimes not. The
problem solver was talking about a solution in Word, but I found the same
type of text in the PDF settings box that pops up when you want to save the
pdf. There are all kinds of checkboxes and I'd thought I was doing enough
by checking 'add hyperlinks'...but the advisor said you have to make sure
'tagged PDF' is CLEAR. So the same thing will probably work for you with
your bookmarks! (...if the settings are similar in CS5 of course, and
there's no reason they shouldn't be. I guess.)
The only thing is, there's a lot of what we call 'ant work' ahead of me. I
have to go back to each InDesign doc and retype the text in the home font,
and create the hyperlinks over again. Luckily, the hyperlink destinations
are still there. It's not enough just to export the document again with
the Tagged checkbox cleared, and you can't create a new hyperlink over an
old one; the 'new hyperlink' option isn't available under Interactive. So
you may have the same problem.
Let me know if this works! I'm off to thank the person...
Susan

Some share buttons don't work on my tablet

I have a Samsung tablet, model GT-P3113 and its Operating System is Android. In some websites when I click share buttons like addthis and sharethis, they don't work and are inactive. I refresh the page and it doesn't help. For example, none of share buttons of http://www.threehosts.com/ratings/comparison-software/wordpress-vs-joomla-vs-drupal.html work on my tablet, but when I go to this page via my Laptop the share buttons work. My laptop OS is Windows 8.
One of my friends has iPad and I sent this link to him. The share buttons work correctly for her.
Does my problem come from my Android which doesn't support share plugins perfectly, or it comes from my tablet model?
Is there anyone with Samsung GT-P3113 on this forum? If so, could you please test the mentioned page and tell if its share buttons are active or not?

I have the Samsung Galaxy Tab 2, 7", model GT-P3113, wifi only (not on my Verizon plan). It's currently running Android 4.2.2; the share buttons on the site you listed above seem to work for me...I didn't actually go through and "share" anything, but I did get to this screen and it appears that all I need to do is log in to whatever service I want to use to share the post :

Upgraded to yosemite now my speakers don't work and i can't play videos on Facebook.

When i play a video on face book I'm told i need to upgrade flashplayer, i wasn't even aware i had it downloaded! I have got rid of flash player (i think ) and now I'm told i need to download FP before i can watch videos. I can't play games on FB either and my speakers don't work.
I wish i hadn't upgraded to Yosemite to be honest as i prefer the old layout and it seems to have caused me problems. Everything was working fine before the Upgrade to Yosemite.
Im not good with computer terminology so please reply as simply as possible :-)
Thank you

Try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player
Adobe Flash Player updates available for OS X on October 24, 2014
Sound.
Sound – can’t hear sound from speaker - Yosemite
Sound – No Sound After Upgrade (2)
Sound Levels - Troubleshoot
Sound – Troubleshooting Internal Speakers

Menus on some web sites don't work

I have just activated 2 new Lumia 520 phones with Windows 8 mobile. (updated to Amber)
When browsing the web, the menus don't work on a couple of web sites that I have written.
These menus use Javascript to show drop down lists and to navigate to the appropriate pages. When you click a link on the menu, the drop down menu appears for a couple of seconds, then disappears. Even in the couple of seconds that the dropdown appears, it can not be clicked.
Interestingly, these web sites also use javascript to open overlay pages when a thumbnail picture is clicked, This action works.
These menus have been regression tested in all the major browsers and they work on a PC, Mac, iPad and Android but seem to fail on Windows 8 mobile.
I searched and can't see any option that allows me to enable or disable Javascript.
Here are links to those 2 sites:
http://www.garynancy.com/index.html
http://www.chisholmtv.com/
What am I missing?

The menuscript (popupmo.js) you are using will not work.
I'd suggest you take this to http://developer.nokia.com where you will likely find more help as this is a general user to user support platform.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Droplets don't work in OS X 10.6!!!

Similar Messages

Maybe you are looking for