Dropped audio when sequence rendered to self contained quicktime movie

last week i rendered my project to quicktime movie file and all was fine --today --after having done some minor tweeking of the project a clip is missing audio when i send project to quicktime--i've tried rebuilding the troublesome clip--the clip has a segment of audio with one segment that is linked to it and 2 other clips that xdissolve before and after the linked items --total duration about 30 seconds---i've checked audio on and made sure there are no track volume adjusters turned down---is this an fce hd problem or quicktime and might the sequence be corrupt?--i'm at a loss with this one? any ideas folks?

Btian
Try Mixing Down the audio just before you export.
Al

Similar Messages

  • Self Contained Quicktime Movie...NO!

    Why is it that if I load I clip into the viewer and mark IN and OUT I get the option to export a Quicktime Movie...but if I locate a shot on the timeline and MATCHFRAME the only export option I have is Quicktime Conversion? I have to export small sections for green screen comping in After Effects, and hunting for the shots is a major pain.
    Yes, even us BIG GUYS ask questions...
    Shane

    Okay the problem is that the clip in your timeline is an independent clip - not that it wants to drink and smoke and hang around with loose women - it is no longer connected to anything in your browser. This can happen when you copy a sequence from another project, maybe you deleted an instance of the source clip from your browser, etc.
    Whatever the cause, when you "f" or find or "match", FCP generates an "in-memory" instance of the clip from your timeline in the Viewer. Whenever this happens, FCP won't let you use Export QuickTime Movie... - to get around this, just drag the clip from the viewer into the browser, it is no longer only "in memory" and you'll then be able to use Export QuickTime Movie...
    I'm not here to make apologies for the circumstances, just describing the behavior and how to get what you want from the system...
    Patrick

  • Can't bring self contained Quicktime movie into DVD Studio Pro?

    Is this possible in FCS 1? I'm trying to bring my self contained movie from FCP into DSP so I can encode it (compressor takes FOREVER). Any ideas? Thanks.

    If it takes forever in compressor, add extra time for DVDSP!
    How big is the file? What format are you encoding in?

  • Batch capture from self contained quicktime movie??

    we have an edl and a 40 minute quicktime movie, but no tape.
    is it possible to automatically parse the quicktime movie based on the edl (rather than manually subclip the master clip)? Like using log and capture, but with a digital file? Log and Transfer, maybe?
    the timecode addresses should all be accurate.
    TIA
    eric

    Apps like these may help if you have a budget:
    http://www.digital-heaven.co.uk/movielogger/
    http://www.videotoolshed.com/?page=products&pID=24

  • Cannot export a self contained Qucktime movie

    As of yesterday I have lost the ability to export a self contained Quicktime move from FCE. The sequence is complete and rendered and I have exported as recently as last month but now it simply makes what's known as a reference movie with the suffix .mov
    The Export drop down menu still displays all the Quicktime options.
    Additionally the Quicktime icon in my dock when clicked displays a question mark. I tried downloading Quicktime but still no go.
    Please help Tom

    Right but what I am trying to convey is that I need to generate the brushed chrome framed, high quality, up-loadable, stand alone video that I used to get with ease and I cannot get that with my FCE. What are you calling it, what is the proper term because I always called them Quicktime. I made one less than 2 months a go.
    Quicktime is present in my System Prefs but is not in the dock. When it was a question mark appeared over it. I cannot find it, launch it, etc.

  • Exporting self contained quicktime

    I'm fairly new to compression. I've noticed alot of comments saying not to export to compressor from the timeline in FCP, but to export a self contained quicktime. Then encode in compressor.
    Doesn't this A)take more time as your exporting twice
    B)take up alot more space.
    Is it just a compression time issue or do you get better quality results when exporting the self contained QT first.
    Thanks

    Overall you get better quality
    A)take more time as your exporting twice
    Can be a bit more time, but worth the results. Generally I find that it is faster to some degree, exporting from Final Cut to Compressor gets slow from rendering and feeding the frames in. Also if you want to tweak the encoding rates after the first encode, having the self contained movie will be faster
    B)take up alot more space.
    It does take up more space, but it is definately worth getting an extra drive to do this, really worth it because of the quality, potential reencodes, etc.

  • Basic question... Mpeg2 vs Self-contained Quicktime?

    Hello, I am kind of ashamed to post this question only now but nothing is
    losf for asking...!
    I have so far made dvds with a Quicktime mov. file, which is
    Self-contained movies exported from Final cut, believing that it is the only way.
    But actually there is Mpeg2! with options to choose mbps ect.
    I have noticed that the color of dvds are slightly different; Mpeg2 has
    more deepness while Quicktime mov. less. But other than that,
    it doesn't seem problematic.
    Must we use always Mpeg2 or can se use self-contained Quicktime files as well?
    Still on an elementary level,
    Thank you!!
    Minobu

    Better to encode as m2v outside of DVD SP and not bring in a .mov
    Some reasons
    Compressor movie
    Calculating encoding rates

  • Playing back exported Quicktime (self contained DV movies) at 16:9?

    Hey all,
    When I export a 16:9 quicktime movie it plays it back in Quicktime in 4:3 squeezed.
    Anyone know how to make Quicktime play it in the correct aspect ratio?
    Thanks
    Final Cut 4.5.

    When I export a 16:9 quicktime movie it plays it back in Quicktime in 4:3 squeezed.
    Anyone know how to make Quicktime play it in the correct aspect ratio?
    In case you're not aware, this is a playback issue specific to QT Player. That is, the anamorphic flag is there, QT Player, unfortunately, doesn't read it. (So, say, if you're planning to make an Anamorphic DVD, you shouldn't alter your export process)
    However, if this QT movie is meant for the web (or for a sound designer or someone of that ilk)...
    From the menubar, File > Export > Using QuickTime Conversion
    In your Save dialog, click on Options. Then, under Video, set a custom size of 1024x576 or 720x405 (or some size maintaining the 16:9 aspect ratio).
    [This being that this is a QT conversion, make sure you select the right codec]
    Click OK and let FCP do it's thing - the output file should now play correctly in QT Player (or embedded in a web page)
    Or did I miss your issue?
    edit: serves me right for stepping away from my machine... beaten to the punch by Cap'n Mench!

  • Out of memory error when exporting to QT self contained movie

    When I export to QT self contained movie the program runs for about an hour then brings an "out of memory" error. My project is 1hour 10 min. I have 650 GB on the external drive I'm saving to and another 145 GB on my imac's drive. There are also photographs I've included in the sequence but I have removed them all from the sequence to see if the format was the problem but the error still comes up. I would appreciate any help.

    Well I don't have to render as I go, it is just a choice. I checked to see if all the video and stills were rendered. I re-rendered after making sure all of the options were checked, removed all of the stills from the timeline just in case the still format was the problem, then attempted to export again. It took about 2 hours. I watched with activity monitor and it took almost all of the available disc space then my computer shut itself down. When I rebooted there was a Quicktime file 320 GB in size but would not open. I got an error message that it was not a mov. file.
    But to answer your question:
    Video is 29.97fps DV/DVCPRO
    Frame size is 720 x 480
    3.0 mb/sec
    16 bit Integer
    Aplha= None /ignore
    Composit is Normal
    NTSC-CCIR 601
    Stereo
    Stills are at 25.0 fps JPEG

  • No audio when uploading a screen recording via quicktime on mac to youtube.

    I've used screen recorder via quicktime for upload to youtube it has both visual and audio when I've viewed it but after uploading to youtube the audio is missing. I'm new to mac so a complete novice. Any help would be highly appreciated. Thanks.

    Hi
    This is a bit unclear to me.
    No audio when recording
    No Video-editing program I know off play any feedback (at standard settings) while recording. FinalCut is even worse that it doesn't play the sound while importing from Camera either (one need to connect speakers to the Camera-audio-out to get this)
    So first - I'm not sure if You can get audio out while recording in iMovie at all.
    BUT
    If there is no sound - When Your captured video is played back - then the problem is more severe and I would start with.
    • Trashing iMovie pref and cache files
    and see if that helps.
    Please - be more descriptive - so that one can do the same actions to see if Your problem is Yours only or if it is the same on more Macs.
    Yours Bengt W

  • I have no audio when trying to access videos using quicktime.  Using windows xp

    I have no audio when using qucktime to view videos on a PC using windows xp.  I have uninstalled the software and re-installed it to no avail.  Using default settings. Specifically trying to use Vic Firth.com

    d scriv, I took a brief look at the website you posted. It appears to be using Adobe Flash Player
    http://www.adobe.com/software/flash/about/
    Unless I'm missing something here. I don't think QuickTime is going to be of much help with that website. Even if you saved a file from the website to the hard drive, it would not be easy to get QT to play it

  • Audio and Video option missing from Export Quicktime Movie Include

    Today as I was exporting a clip, I noticed that the Audio and Video option was missing from the Include drop down. I only have the options of Left, Center, Right.
    I highlight the sequence, control E (or File>Export>Quicktime Movie) and the Save window comes up. The Settings drop down is the same, the Markers: drop down is the same, but the Include: has the options of Left, Center and Right. I thought the Video and Audio dropdowns were always there. I hate to admit it, but I have not paid attention to them in a while. Getting old I guess.
    Sequence settings is 720x480 NTSC DV (3:2)
    NTSC - CCIR 601 / DV (720x480)
    Lower (Even)
    29.97
    QT Video Settings
    DV/DVCPRO - NTSC
    100%
    Audio
    48 kHz
    16-bit
    Channel Grouped
    Did I miss something?
    Thanks

    Thanks, forgot about that.
    For what ever reason it started working correctly a couple of hours later, after I started an SD project. The video came out fine
    I had been trying out a couple new applications, so maybe one was causing it. I will see if it happens in the future.
    Jim

  • Sequence won't export in quicktime movie

    I have Final Cut Express and for some reason a sequence won't export into a Quicktime movie, but a Final Cut Express movie file.
    Any ideas why this is happening?
    Thanks
    Barry

    Thank you both for the input.
    I didn't realize this. This was the first time the file I exported didn't have the Quicktime icon, or named a Quicktime File.
    Does this type of file still work on Internet sites like Facebook?
    Much appreciated.
    Barry

  • Why When I try to open a quicktime movie from email it never stops " loading ?"

    When I try to run a QuickTime video from my email, it just continues to say "loading". Can anyone explain this?

    Sorry, no one here can help you. You're in the wrong fourm. It's posted in the iPod Shuffle Fourm. But, I can answer your question. It's either due to a corrupt file or slow connection. It's that simple. Just ask them to email it to you again, because if the file is corrupt, it's that easy.

  • Dropping audio when dragging clip from Source Panel to Timeline

    I have having issues with audio being dropped when dragged from the Source Panel to the Timeline. Audio is present in the Source Panel and plays great along with video, but when I drag the selected clip to the Timeline it drops the audio.

    Can't transfer video from source monitor to timeline
    This is an answer to a previous topic about video but the same answer also applies to audio

Maybe you are looking for

  • Amount of mail messages slowing the app down?

    My mail app seems to be taking longer than before to fetch messages and I was wondering if it had anything to do with the amount of mail messages in my various mailboxes. Can someone tell me, should I be clearing out old mail messages or is it safe t

  • SCHEDULE AGREEMENT-DELIVERY SCHEDULE LINE ITEM PRINTING

    Scheduling agreement is created in ECC. Delivery schedule line items are generated using APO and CIFed over to ECC. Upon displaying in ME38 in ECC, the delivery schedule line items are appearing as required. The problem is that no output type is disp

  • Maintain the telephone and fax number of vendor in Purchase order document

    Dear Expert, Hi, i'm wondering here.. why when I create purchase order , and enter the vendor in vendor field, the telephone and fax field in PO header - address tab is not automatically appears, only the street/ house number , postal code and so for

  • Pointer Tool Click Zones

    These are great and I use them all the time, but I do have a problem with the top and bottom arrangement. Just lately I have been spending a bit more time in Pro tools (hence the multi tool) and have suddenly realised upon jumping back into Logic lan

  • Unable to bypass jrockit option

    HI Gentlemen, I have downloaded a good sample Applet/ADF program. It has been working A1 with my Java7 and JDeveloper 11.1.1.0.6. After installing Java and Fusion Middleware several times, now trying to execute the .jspx page with the builtin weblogi