Dropped from 6GB of data to 2GB data overnight?
Hello, yesterday on 11/09/13 I went to the verizon store to upgrade a razr maxx that had been subjected to water. I ended up choosing the LG G2. I previously had the unlimited plan and was told by a store representative that I would receive 6GB of data allowance per month for the same price we had been paying for unlimited. The same day we got the phone the My Verizon app stated that I had used approximately 4GB out of the 6GB I was allowed for that billing cycle. The next morning, today, it said I was 2GB over the 2GB limit in the same application and will be billed accordingly. If any light could be shed on this issue I would appreciate it infinitely, thanks in advance!
seanj88 wrote:
Hello, yesterday on 11/09/13 I went to the verizon store to upgrade a razr maxx that had been subjected to water. I ended up choosing the LG G2. I previously had the unlimited plan and was told by a store representative that I would receive 6GB of data allowance per month for the same price we had been paying for unlimited. The same day we got the phone the My Verizon app stated that I had used approximately 4GB out of the 6GB I was allowed for that billing cycle. The next morning, today, it said I was 2GB over the 2GB limit in the same application and will be billed accordingly. If any light could be shed on this issue I would appreciate it infinitely, thanks in advance!
It's reflecting your prorated amount depending on when you upgraded your phone and when your billing cycle renews. So for an example on a 6GB plan, your prorated amount is likely 3GB for a mid billing cycle change. It combines the data from before you switched plans with whatever data you used after you switched so sometimes it looks like you're over. Supposedly your new bill is suppose to separate the usage under your old plan and usage under your new plan. As a precaution I called Verizon customer service to make sure I wouldn't be charged for any overages since most of my usage was while I was on an unlimited plan before I switched to the new plan. I was told I would be charged. I hope this helps.
Similar Messages
-
I can't drag and drop from a data CD I recorded
I recently burned some audiobooks files (in mp3 format) as data cd's in Toast 8.0.1. When I go to reload them back onto my 20" 2 Ghz Dual Core Intel I can't drag and drop the files directly into any folder while using the columns view in a finder window. I can do it if I drag onto the music folder and let it spring open down to the level of the folder. I also can drag the mp3's into iTunes and then into the folder. This is not CD related since I used several diff brands.
I constantly update, backup, repair permissions, and do other maintenance so everything is up to date. I have noticed this behavior just since I started to use the program called Audiobook Builder. I am (and have always used) a non-admin user account. When this started a few months ago it seemed to go away with a restart, permission repair, or a logout but now it seems permanant. I checked user permissions on my home folder - I have not added any software since adding Audiobook Builder. Any idea's? I read something about trashing a com.apple pref but didn't try that.
I suspect Audiobook Builder since it changes the permissions and filetype to the iTunes Audiobook filetype but have not seen anyone reference this.
wesdj_paige wrote:
While the programming of course could be done, the idea of a function that performs on original unprocessed images seems to violate the whole idea of what Lightroom was designed to be. At least that's my opinion. Of course, the idea that Adobe should do this programming for a relatively small number of people (you're one of a very few people to ask for this, that I have read) seems to be something that isn't going to happen.
I agree, I can't see much reason for drag-and-drop to drag the unprocessed image - in other words, an image that isn't the one that you see when you drag and drop. I can see that just filling this forum with "why the heck does it do that????????" posts. I could be wrong, but I suspect that Adobe won't do that.
But if you do want to drag-and-drop the original unprocessed image, you can do it very easily now. Right click the image, choose "show in Explorer", and then drag-and-drop from Explorer. -
I just upgraded my data plan from 6GB to 10GB for the same rate of $80 per month. Is this a promotion? If yes, when does the promotion end?
In most cases you keep the same plan and promotions even when you upgrade the phone. There are exceptions for very old plans and unlimited data, but essentially mrhelper is correct. You have option to "keep current plan" when upgrading. so in most cases, your statement that you will go back to $100 for 10 GB when upgrading is incorrect. What was your particular circumstance?
-
I am wondering why i am paying about 100$ for 1 line and 2gbs of data and now i see these commercials for 2 lines and 6gbs of data for 100$?? Please explain.
How To: Direct Message and AyaniB_VZW
-
Drag and Drop backup copy of data to external Lacie problems. Mavericks
Trouble with Drag and Drop copies to external Lacie drive has gone from bad to worse. Mac CPU Senior advisor was stumped after 4 hours. It's been bucked up to the engineers. Do you have any ideas? First, Time Machine/Time Capsule to the newest Mac airport extreme is working fine. This drag and drop problem started mid 10.8. Came up with some work arounds. It's worse with 10.9. When I drag and drop data folders (Current IMac, Mavericks, thunderbolt to current Lacie 4tb) the copy starts ok, but randomly stops with the following window.
I'm then unable to complete to drag and drop from the source folder to the Target folder on the Lacie external. Occassionally if I retry, I get a window allowing "merge" of source and target. This works, but merge isn't offered with every folder.
.DS_Store files are hidden and in every folder as we know. They are supposed to be "ignored" when transferring data. They are for the most part, but randomly stop the copy of a folder. Any thoughts?
thanks alot...can you beat Apple engineers to the answer? I'm still trying work aroundsHi, Rich -
So it wouldn't be an easy and fast way to make a bootable backup of the internal HD?
As a matter of fact, it is an easy way to do that. I do it all the time.
There is a trick, though...
When a volume (volume = an unpartitioned drive, or a partition of a partitioned one) is dragged to another volume, Finder will copy the whole thing to the destination drive, placing everything in a new folder on the destination drive; that folder will be named the same as the original (source) drive.
An OS 9 System Folder works best when it is at the root level of a volume. This means that after the copying is done, the System Folder should be moved out of the folder created on the destination drive. It is best to also move the Applications (Mac OS 9) and Documents folders out to the root level of the drive.
A few aliases may need to be fixed - the pathname to the original for a copied alias will still point to the original original, the one on the source drive, rather than to an original on the destination drive. Ones that may need fixing are - the one for Sherlock in the Apple menu (it can be found in the Apple Menu Items folder in System Folder); and perhaps a few in the Application Support folder in System Folder.
You will see a couple of additional folders in the new folder on the destination drive - one named Desktop, the other Trash. These will contain copies of items left lying on the desktop, and anything left unflushed in the Trash at the time of the copy process. -
SQL function column in drop down list's data provider's query
Just wondering, if it is somehow possible to use SQL function column for drop down list through data provider.
At the moment, I am using id column as return value and name as display value from this query through CachedRowSetDataProvider:
SELECT ALL someTable.Id,
someTable.Name,
someTable.Postal_Code,
FROM someTable
However, I want to change display to use calculated column as display value, for example Name_PostalCode from below mentioned changed query:
SELECT ALL someTable.Id,
CONCAT(someTable.Name, ' - Pin Code: ',someTable.Postal_Code) Name_PostalCode ,
someTable.Name,
someTable.Postal_Code,
FROM someTable
But JSC doesn't seem to like this.
Is it someway possible to achieve this?
Thanks.>
But JSC doesn't seem to like this. Can you explain more. When doesn't it like it, in the design view, in the query editor, when your run it? What is the error you are seeing?
See http://blogs.sun.com/divas/entry/displaying_multiple_fields_in_a -
Drop, create and insert data into few intermediate tables
Hi All,
I need to schedule a process to drop, create and insert data into few intermediate tables on a weekly basis. Here is what i need to do in the stored procedure, which can be scheduled weekly.
DROP TABLE TABLE_NAME1;
DROP TABLE TABLE_NAME2;
DROP TABLE TABLE_NAME3;
CREATE TABLE TABLE_NAME1
CREATE TABLE TABLE_NAME2
CREATE TABLE TABLE_NAME3
INSERT INTO TABLE_NAME1 SELECT ....;
INSERT INTO TABLE_NAME2 SELECT ....;
INSERT INTO TABLE_NAME3 SELECT ....;
Any suggestions, examples or code on how to accomplish this task would be very helpful. Any question pls let me know.
Thanks in advance.I am using the intermediate tables in an extract process. The idea was that the table would be created prior to calling the extract procedure and once the data written to the intermediate table had been processed the table would be dropped. This would be repeated each time the extract process is run. From a DBA's point or view, would it be better to just leave the table on the database and truncate it after each run or is removing it entirely best?
-
How to burn 6GB of data to a 4GB DVD??
I have a 6GB iPhoto library that I'd like to burn to a DVD and then remove that library from my HD.
How do I do that?some applications will let you burn data on two different disks. it'll split up the content and then once you have the files in the same area together, they will form back to make your backed up file.... the application costs money of corse but I'm sure Toast Titanium Does this.
what you REALLY should do is get a thumb drive and back up your iphotos on that. This way you won't spend money on dvd's at 4gb incraments.
You could also get an external hard drive.
If you delete the stuff on your computer, you're not neccessarily backing it up. Backing up intails two copies of a file. The file itself as it was created initially. and the back up of the original on a different storage device for safe keeping.
you can also navigate to your iphoto library, right click, view contents, take 4gb worth of photos out of it and and burn those to a disk and then take the rest and burn those to a disk. there is no way of getting 6gb of data onto a 4gb disk though.
edit: Reed, you posted faster then me! I'm slow today I guess. -
I have a situation, where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the date is given
from the parameter dynamically) in MDX for SSRS report
ramHi ram,
Per my understanding that you want to get the period date based on the month selected and the given date, right?
Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
Specify the available value:
Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Specify the default Value:
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Add filter to the dataset as below:
Preview you will get all the date in the given Period:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu -
Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
SwamiDear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese -
Data not updating from psa into Data Targets
Hiii,
We have started data upload in info cubes from psa . The number of records was 4 in psa . But after waiting for at least 3 hours ,still the data is not updated in info cube . The data which we want to upload in info cube (of stock) is of past date which due to some reason failed to update in BI from ECC . To upload the same that is data of past date we have deleted the setup table in ECC and then after filling the data again in set up tables, created a new info package from which uploaded data in PSA . But while trying to upload data in info cubes,it is not getting updated and the request status is showing still green yellow in psa.
Please suggest how to resolve this issue.
Thanks and regardsAre you loading material movements from 2LIS_03_BF in to cube? If so, please look at the below link for inventory data loads.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Regards,
JB -
Reading Values from Listbox and data source into MS Office Toolkit
Hi,
Been trying to get this to work but making no progress and my lack of experience on labview is becoming a hinderence.
Does anyone know how I can read the values from the listbox example attached into MS Office Toolkit for Excel?
The values from the listbox need to be compared to mulitple values from a strain data source.
Cheers,
Mike.
Attachments:
Capture.PNG 62 KBHi,
Ok in the attached vi I want value from the listbox "0kg through to 10kg" to be put into the excel table in the report generation toolkit along side data from the convert strain gauge reading.
Cheers,
Mick.
Attachments:
Strain Gauge Edit2.vi 112 KB -
FINT interest calculation on cust overdue items from net due date required
Hi.
I am running FINT option i am running interest calculation from net due date onwards whereas the system is calculating the interest from Next date of due date.
For example: Customer invoice is raised on 01.01.2011 and Net due date is 01.01.2011. I gave the option in the interest calculation - SPRO - FINANCIAL ACCOUNTING(NEW) - ACCOUNTS RECEIVABLE AND ACCOUNTS PAYABLE - BUSINESS TRANSACTIONS - INTEREST CALCULATION - PREPARE ITEM INTEREST CALCULATION, Ref date as as 1 - Value date (Baseline date from Net Payment).
Still the system is calculating the interest from 02.01.2011 instead of from 01.01.2011.
Can anyone help me in this regard.
Regards,
PadmavathiHi,
We can calculate interest on items cleared with in the calculation period.
When you are calculating interest on open items, system will check open items as on the Calculation Date.
But if you want to calculate Interest on items cleared with in the calculation period., you have to check Calculate Interest on Cleared Items also.
For Instance: If you are calculating Interest on 31st July for the period of 01.07.2009 to 31.07.2009, in this case
some open items are already cleared with in this calculation period, even though you have to calcuate interest for those cleared items for that many days. System will calculate interest for that many days.
Try with this option, still if you need any help please let me know.
Thanks
Chandra -
ALV Report how to display from and to date values in the header.
I develoeped alv report . i want to display selection screen from and to date values in top of page...
any sample code pls guide me..You have to do many things...
first find the selection details using the FM.
RS_REFRESH_FROM_SELECTOPTIONS
use the Blog to Align/populate the Header from the selection table
/people/community.user/blog/2007/05/07/alignment-of-data-in-top-of-page-in-alv-grid -
How to push a perticular request from PSA to Data target using DTP in BI
Hello all.
I have mulitple requests in PSA & wanted to move only perticular requests (Randomly, say first request & last request ) to data target using DTP in BI 7.0. How can we do this.. ? Is there any option in DTP (BI 7.0)for selective loading of requests from PSA to Data Target..
Thanks in advance..
Cheers,
sami.Hi,
It is possible by using 'zero fetch' in DTP
If you want only the recent req to be loaded.
1. In PSA, change the status of the recent request to red
2. Do a zero fetch
that is processing mode - No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
3. change the particular request status back to green
4. Run a delta load
Regards,
Priya.D
Maybe you are looking for
-
How to move Time Machine backup
Up until recently, I have been using an external hard drive connected directly to my computer as a Time Machine drive. When I bought the drive, I was the only person using a Mac in my house, but as time went by, and technology failed, other members o
-
My Ipod touch 3g will turn on with the cable attached, it will sync with Itunes. But as soon as I touch the screen to unlock it, I get no response to the touch and it immediately crashes. Also everytime I unplug it I have to restore it to a new Ipod
-
Unable to install Flash on Mac OS X 10.8.4
I am currently running Mac OS X 10.8.4. This morning I had a blocked plug-in message on YouTube, so I tried to install the latest version of Flash. After installing, I was still getting the blocked plug-in message, so I completely uninstalled Flash a
-
[SOLVED] Empathy does not work after gnome upgrade
Hey there, I have upgraded gnome from 2.26 to 2.28. Almost everything is perfect (in fact apps start faster than before) but empathy does not connect to msn or any other protocol. Any help would be appreciated. Tks Last edited by mmf1902 (2009-10-17
-
Custom MediaStreamSource and Memory Leaks During SampleRequested
Greetings, I have a nasty memory leak problem that is causing me to pull my hair out. I'm implementing a custom MediaStreamSource along with MediaTranscoder to generate video to disk. The frame generation operation occurs in the SampleRequested handl