Dropped iPad2, volume display stays on max's out automatically - cannot adjust anymore?
I recently dropped my iPad2 and although most things seem to operate normally the volume display stays on and the volume automatically goes straight to max. I am traveling overseas & need to get some running repairs?
Thanks
Peter
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!
Similar Messages
-
Is it my Mac? Is there software I need? An app perhaps? This seems way too complicated to set up spkrs. I'm attempting to use 2 hdmi and 1 headphone outputs w/ control and varying levels (ie hdmi's quieter than desk spkrs) thanks for suggestions! -Tim
Hi Tim,
Not sure since I'm deaf,but if possible I'd think...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there. -
My ringer volume keeps turning itself up to max and then the volume icon stays on the screen, anyone know how to fix this?
I Have the exact same issue why is there still no fix?!?
-
I have recently used the ALARM facility for a number of days without a problem. Today, after accepting the alarm call the program shut down but the VOLUME display is now firmly set in the middle of the screen and volume is HIGH.
I was also on FACETIME for 20 minutes before this happenedHello there,
I tried your solution but whilst it did not work I think I might have missed something.
There was something I did not fully understand and that was when you said "close all open apps" I thought I had done so but apparently I had not .....but
I followed the close down instructions and eventually got the APPLE logo but the display returned with no text.
I then saw your icon and when I looked at recent posts I saw your answer to a previous, similar, question to which your reply was "are you using a sleeve?" I was so I took it off and, HEY PRESTO, the display had disappeared!!!!
So, a heartfelt Thank You. I had reconciled myself to spending all day sorting this out and now I can respond to my wife's request to go and cut the grass!
Thanks again,
Bill Skeggs -
How to get rid of the on screen volume display?
how to get rid of the on screen volume display, it stays on even after reboot. and when i hit the volume button another one shows on top of it.
Sounds like a key on the keyboard is stuck down. Does it disappear if you disconnect the keyboard?
-
My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!
Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this. -
The volume display bar continues to stay on the screen of my Pavilion dv7 and I can't remove it. I have Windows 7 64 Bit. Any known fixes for this?
http://docs.info.apple.com/article.html?artnum=303130
Thanks it worked
Windows XP
Windows XP -
My ipad2 volume increase button does not function
My ipad2 volume increase button does not function
Do you have a question or are you just letting us all know? :-)
Have you dropped your iPad or perhaps damaged the button in some way? -
Why does the ringer volume display frequently on 3gs
Why does the ringer volume keep displaying on my 3gs? Seems it may do this when the phone is picked up or shaken.
This just happened to me today. The ringer volume display just remains on screen. Tried hard rese, nothing. It happened right after I dropped my 3GS - of which I've done many times but had not affected it because of the silicone case taking the brunt of the shock. Hope someone has a solution to this.
-
I am using Illustrator CS4 and my drop down menu displaying different typefaces is no longer showing all of them, just blank spaces where they would be...that is unless I put my cursor over it and I can then see the typeface. This is more of a nuisance than anything and didn't happen until I updates OS X to Yosemite. I currently am operating OS X Yosemetie 10.10.2
I have attached a screen shot. You can see that the font highlighted as the cursor is over it I can see the preview...but one I move the cursor it appears like all the others in the list and is blank.
HELP!Solved using this previous users had the same issue; Font previews not appearing correctly in the character window after upgrading to Yosemite
-
Display stay black after wake up
Hi,
I hope there is someone who could help me, I have Macbook 2011 Early running Yosemite 10.10.2 and I have problem with my display turning back on after the sleep mode.
When I open the lid my display stay's black but everything is actually working, I'm able to login but everything is still black. This only happens when I close the lid, if my macbook is still open in the sleep mode than is everything absolutely fine. I had also blue screen two times, any idea what it could be please ?
I have tried to completely reinstall Yosemite, reset PRAM and SMC but none of this worked.
Any advise please ? Is it something with the hardware ?
I pretty much desperate and out of ideas how to fix that.
I will be really happy for any advise.
Thank you !
Best Regards,
MichalIf you have not already, reset PRAM
http://support.apple.com/kb/HT1379
and if that does not help, reset SMC
http://support.apple.com/kb/HT3964
which is unplugging the iMac and reconnecting using a precise procedure. You should disconnect ALL cables when you do this. If you have been using power strip, connect the iMac's power cord directly to a wall power outlet for this test. Power up with nothing connected except for the power cord. Once startup completes, add just your keyboard/mouse. I don't know how often this problem occurred, but try running the iMac that way (before connecting any other peripheral devices) to see if you can get it to recur. If you cannot, add back your peripherals (one at a time if possible), and again see if you can get the problem to recur. -
My ipad2 volume is stuck in headphone mode?
Headphones are not plugged in and the volume displays headphones when I try to adjust the volume. I have tried to reset all settings through iPad settings and by holding down the home and power buttons but neither work. I have also tried to plug and unplug headphones but this doesn't work either
Thank you Macaby. Juggling didn't work despite using more than one set of headphones... In the end I switched off the iPad and left it for a while; when I switched it on again it all worked fine! Also I am new to this blogging stuff so it took me a while to find the reply button!
-
Un fact I cam open app stores, but if I want to find a new application after tap keyword the display stays white.
Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
Why does my iPod Touch display stay in a zoom mode and will not return to a normal display
my display stays in a permanent zoom mode, i cannot scroll to various apps. has anyone else had this problem?
Your observation and suggestion worked. I am now able to use my I-pod as in the past. Thanks for your help.
Sugarcamper -
TS1398 Why does my iPad2 not display the WiFi icon?
Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.
Try the following:
1. Reset the AirPlay devices
2. Reboot the router
3. Reboot the iPad
Note: The AirPlay icon is now in the Control Center
Maybe you are looking for
-
How do I stop two iphones sharing contacts?
How can I stop two iphones sharing contacts and apps?
-
Set JArray values with invalid key value: "LastUpdatedTime" on new alert rule creation
Hey all! I'm trying to create a new alert rule using version 0.9.11 of the Monitoring Library and am getting this error on alertsClient.rules.CreateOrUpdate: "Set JArray values with invalid key value: "LastUpdatedTime". Array position index expected.
-
Choose Preserve Image Dimensions When Relinking
Is there a way to change the preference "Choose Preserve Image Dimensions When Relinking" from scripting? This setting is accessible in the user interface ( in the Edit menu / Preferences / File Handling tab ). Andreas
-
FYI Tasks and Expiration Policy
Hi all, i try to set an expiration policy for FYI Tasks using the Human Task Editor but it doesn't work where it works for other types. can someone confirm that an expiration policy can be set for an FYI task? I am using SOA Suite 10.1.3. Thanks
-
Help please with restoring iphone factory setting
hey can someone help me please? i did "restore" to factory setting on itunes for my i phone and now after it reboot it has the icon of usb and itunes icon on screen and the only other option it lets me do is emergency call, what do i do?