Dropped iPhone- first small discoloration, then white line.

Hello. I dropped my iPhone (not 3g) while at work. Luckily, the glass didn't shatter or anything. After a few minutes of using it, I noticed a bubble-like yellow discoloration on the left bottom corner (on the grey area before the arrow where it says 'slide to unlock'). It sorta reminded of what liquid would look like under the screen. I was using it sideways later on & noticed the discoloration went away, but now there was a fine thin vertical white line where the discoloration was. You could barely tell. A few hours later, the white vertical line kinda seperated to form something like this "-" going down. Is that a dead pixel or what? Any solutions to make it go away? Btw, when the phone is off, there is no line or anything... it looks normal. No external damages. I can live with it, the phone still works, but I was just wondering. Thanks!

Hello Pranav9876,
It sounds like you are getting a white line running vertically on the screen of your phone after dropping it. I recommend starting with some troubleshooting before suggesting service.  I would start by resetting your phone:
Reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Then if the issue persists I would recommend backing up your device to iTunes and then restore it as new to rule out software.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
If the issue persists after all this, I would recommend seeking service for your device:
iPhone: How to find your iPhone repair options in the United States
http://support.apple.com/kb/HT5866
Thank you for using Apple Support Communities.
Cheers,
Sterling

Similar Messages

  • My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

    My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

    By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
    If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
    I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

  • HT5463 they have developed it pathetic as even if you activate it the other user gets first small ring then busy tone. So, its finally gone to spoil your relations to any one.

    they have developed it pathetic as even if you activate it the other user gets first small ring then busy tone. So, its finally gone to spoil your relations to any one.

    Please post in your native language.  Your English is incomprehensible.

  • Upon updating 5.1 iphone 4 blacked out with white line through screen and nonstop vibrating

    i was updating lastest version my iphone 4 through icloud until screen blacked out with white line in middle of screen and started vibrating non stop.
    tried a hard and soft reboot NOTHING WORKED
    phone died
    put back on charger
    same problem screen would brown out and fade to black.
    now it won't turn on.
    fed up #FIX

    phone lost full charge upon charging again now i have colored lines running horizontal through screen then vertical.
    hard restart does nothing again.
    but its no longer vibrating.
    seems like serious software issue.

  • I dropped my iPhone 4s and now vertical white lines appear. i cannot plug it in or turn it off. if i do go to the genius bar and replace it, since i haven't backed it up recently can i do anything to keep any of my contacts, pictures, etc?

    it has been like this for an hour or so. no buttons work. it is completely nonresponsive.

    If the phone does not show up in the device list in iTunes on your computer, you can't back it up anymore.
    If your phone is set to back up to iCloud, at least your contact info and photos should have been backed up, if you selected those items to be included in the backup.
    Did you try to connect in recovery mode?
    iOS: Unable to update or restore

  • New Iphone 4S - Will not slide, white line appears around it like a box

    I bought an Iphone 4S yesterday and when I try unlock it will not allow me. I try to slide across and the box appears around it. If I happen to get it unlocked after pressing for awhile it does the same with any apps I press on. The white link/box appears around the apps.
    I have tried to re-boot and that did not work (Using home and sleep button together until the Apple logo appeared)

    Make sure Settings > General > Accessibility - Assistive touch is off.

  • White lines on ipod classic screen, could it be cracked screen? it has never been dropped or anything. Is it pretty common problem. Contacted apple support, denies problem exist.

    White lines three appeared on my ipod classic screen. It has never been dropped or screen scratched. Suddenly white lines appeared on the screen. Tried to reset settings, nothing changed. Is this a common issue with ipod classic coz apple adviser denying ever having heard of this problem and I have to pay half of msrp to fix it. Offered 10% off to purchase new ipod and turn in old one. What a waste. Apple should take responsibility if this problem is indeed inherent with this product.

    The magnets are tnot the cause.
    Try the standard fixes to rule out a software problem.
    - Reset. Nothing is lost
    Reset iPad: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore tofactory defaults/new iPad
    If still problem then time for an appointment at teh Genius Bar of an Apple store. The drops may have damaged it or there could be another cause.

  • White lines around figures

    Captured ftg from DVD created from digi-beta from original 35mm film. Editing a 4 minute trailer but certain clips (30%) show short curved white lines around heads, figures, etc. Sort of like zebra but not? One clip has first frame with horizontal white lines top to bottom. Same clip shows up as green screen in QT file I made. Also a few freeze frames for a second or two. 70% of trailer is fine. Thought maybe the capture had wrong settings?

    go back and capture from the source tape

  • I dropped my Iphone 5 which resulted in it shattering and the screen was still on but it was black with only a white line through it so I couldnt access the phone however I switched over to my Droid and now I cannot send or receive messages?

    I dropped my Iphone 5 which resulted in it shattering and the screen was still on but it was black with only a white line through it so I couldnt access the phone however I switched over to my Droid and now I cannot send or receive messages and I cant turn off imessage because I cant see anything on the screen.  Help?

    Then the bottom of the support document states that if you do not have access to the device (which unfortunately because of the screen issue you do not) to contact Apple Care. That is what you need to do.

  • My imac starts with a white screen, then goes black and a small white line just blinks in the top left corner of the screen?

    My imac starts with a white screen, then goes to black with a small white line blinking in the top left corner of the screen. Any ideas? Thanks.

    Try starting your iMac with the original DVD that came with the machine then launch disk utility to repair your hard drive. 

  • I have a small white line running down the edge of my screen, any idea what it is? i have has the computer less then a month, didn't really notice it before.

    i have a small white line running down the edge of my screen, any idea what it is? i have has the computer less then a month, didn't really notice it before.

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    Best.

  • Drop iphone 4 on floor showing black and white lines

    drop on floor show black and white line

    And what troubleshooting steps have you tried so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Has anyone else has seen this problem with their iPod touch 5th Generation with iOS 7.0.4. My screen started making flashing white lines across the screen, then went dim, then pixeled with purples

    The ipod will show flashing white lines across the screen, going down, it then does somthing where the screen will dim down but its not like when the backlight goes on and its about to lock. It dims the background of your ipod and the icons and letters kind of all look defined. Then the ipod gets all pixelized and it has big boxes on pixels and its all differnt colors like purples and greens, red, etc. then it turns right off and restarts itself less than 5 seconds later. These things happen really fast but when it does it's really weird. It first happened 3 times in a row, Its still continuing to happen but i can manually turn off my ipod by holding the lock button down and not even 30 seconds later it's like its possessed and it turns on by itself. I talked to somone on appel and they told me to back it up and restore it. I restored it and as soon as the process ended and tuirned on like a brand new ipod and like clockwork the glitch happened instantly. It did it a couple of times throughout the night and i kept having to watch it so i can keep turning it off manually because it continues to turn on by itself. I talked to 3 different people on Apple Support and they couldnt even find an answer for me. It's so weird.

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also,
    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Good workflow to avoid white lines and discolored boxes with transperancy?

    I'm somewhat new to Illustrator.  I have designs in illustrator CS4 that contain objects with drop shadows that are on top of gradient backgrounds.  When I save out the artwork as a PDF file I see random faint white lines and discolored boxes around the objects with the drop shadows.  When I print proofs of the file on my HP3500 color laser printer I see the white lines and discolored boxes as well.  I'm afraid the the lines will show up in production when I send off to the printer. Here's what I'm doing.  Any suggestions would be appreciated.
    (Document Raster Effects Settings: Resolution-High 300ppi/Background: Transperant/Options: preserve spot colors, add 12.7mm around object)
    1. Save file as PDF from Illustrator CS4
    2. PDF Settings
         a. PDF Preset: PDF /xa:2001
         b. Advanced Overprint and Transperancy flatener options: Preset-High Resolution
    When viewed and printed from Adobe Acrobat 9 Pro there are white stiching lines that are visible.
    Do I need to worry about these? Or will they go away when sent to a better printer?
    Thanks for the help.

    Try "Press Quality" Acrobat 5 compatable setting for "live" transparency.  You can also try PDF/X-4 2008 which maintains live transparency and, in CS4, maintain Acrobat 5 compatability.  PDF-X1 is a setting that "flattens" transparency which may limit your output options, depending on final output device.  Double check your raster settings and make sure it is set for 300ppi/2400dpi and not 72ppi/300dpi.  As suggested by Wade, your printer may not be a Postscript Level 3 output device with a RIP.  So, the driver may not be screening the artwork properly and the stitching shows up in output.  You may benefit from taking the file to a prepress shop and have them output a "contract" proof.  If the stitching shows up in the contract proof, then the PDF setup may be the problem or the original file itself.

  • Black screen with white line after dropping

    MY husband dropped his iPhone and now it has a black screen with a white line from top to bottom. The phone can take calls but the screen never changes. Is this a screen problem that would be fixed if we replace it or is it something internal? He can press buttons but it only does the emergency call and then you can hear a bunch of buttons being pressed even though he isn't touching the screen. Any help would be great!!

    You obviously broke the screen when the phone was dropped.  Apple doesn't repair the screen on an iPhone 4; it will replace the phone for $149.

Maybe you are looking for

  • Hide Controlling Area from Cost center in report

    Hi Experts, I have Costcenter as reporting field in BW report. Controlling Area is compunding char for Cost center. In the report, it shows both values (cost center and controlling area) when i use cost center in query. foreg. KO01/C123456 as key. (K

  • Excellent management software? (2)

    (not trying to flame...I accidentally posted this on the wrong board earlier...) I'm new to my position and have been asked to find a network performance managment package for my company to use. I've searched around and found a few different solid of

  • To freez PO Doc date  In ME21n

    Hi expert , My Requirement is , i want to freez PO Doc date in Tcode ME21n Only show current date  while creating a new PO . Means no one could make the PO in previous or future date from current date . Date should come just like sy-date but not in c

  • Move Print Version and Export of ALV to the right

    Hello online experts, Merry Christmas and Happy New Year! I am working on a webdynpro that displays data in ALV format. I now want to move Print Version and Export of ALV to the right side and hide View(Standard View). I am able to hide View(Standard

  • PACL Issue

    Experts, I'm configuring a PACL on my L2 Switch to block a user. Both of us reside on the same L2 Switch and the same VLAN. On the Switch, I conifgured this statment globally on the Switch: mac access-list extended Deny deny   host xxxx.xxxx.xxxx any