Dropped Macbook - optical drive won't work

Any one know what the cost would be for Apple to replace a superdrive in a Macbook? I just dropped mine, and the optical drive is the only thing affected - constantly tries to read a disc, can't eject it, etc.
Just looking for what it would cost....

OK, called the 2 local places (Apple authorized): First told me $129 for the drive + 1.5 hours labor at $69. Not too bad.
2nd place - told me $350 - ONLY if the drive wasn't damaged (Huh?). They said something about the drive being refurbishable by Apple was the only way they could do it. If it was damaged beyond what Apple would accept, would be $100 additional.
So - for now.....I took the system apart, and finally got the disc out, so the grinding stopped. So, for now, I've got a QUIET dead drive at least.
I plan on looking for a replacement drive and doing it myself. Thanks to all for helping!

Similar Messages

Brtand New Mac Pro Internal Optical Drive Won't Work

Actually, this is a two parter. My new Mac Pro internal optical drive rejects every disk I insert. It won't read anything. Should I get it replaced? Part two: I have an external Sony optical drive which was working up until yesterday. Today, I was going to go through some disks and now THAT drive is rejecting everything. I had it connected via USB and changed it to a 400 to 800 firewire. I tried to read some disks again and still they get rejected. What can I do to correct these problems?

I am having the exact same problem with my mac pro since upgrading to 10.5.7 neither of my drives will read CD or DVD and it states that no burning software was found in the system profiler

External optical drive won't work on macbook pro retina.

I have a macbook pro retina which doesn's have an optical drive. I have bought an optical drive. When I plug it in and put a disk in I can hear the disk spinning and the light comes on but nothing happens on my mac. It doesn't seem to recognise it. Any suggestions?

Anniefb1 wrote:
I have a macbook pro retina which doesn's have an optical drive. I have bought an optical drive. When I plug it in and put a disk in I can hear the disk spinning and the light comes on but nothing happens on my mac. It doesn't seem to recognise it. Any suggestions?
Just had that happen to me.
First, run Disk Utility and see if the SuperDrive (it is an Apple SuperDrive isn't it?) is listed. Is the disk you inserted shown? If not, hold down the option key and click the Apple menu - choose System Information and when that shows up, choose USB. See if it's listed there. If it is but neither the drive nor the disk you inserted appears on the Desktop, the side bar of the Finder window, or Disk Utility, return it for a refund (if it's within 14 days of purchase) or a replacement. That's what I had to do a few hours ago and the replacement works as it should.
BTW, if you want the disk you inserted back, and pressing the trackpad as you reboot doesn't eject the disk, as a last resort run Terminal and enter (copy and paste the following)
/usr/bin/drutil eject
to try to force the disk to eject. It probably won't work (it didn't for me) but if it does, at least you get that disk back.

Cube 450 optical drive won't work!

Hello fellow Power Mac G4 users!
In both of my Power Mac G4 450 and 500 Cubes, the DVD drives stopped working! The DVD Player app says "There was an initialization error. A valid DVD drive could not be found. {-70012}"
CD's don't work either and never appear on the desktop! Before I replace the drives, why do Cube drives fail while the same drives in my iMac G3's work perfect always? Is it because the Cube forces the drive to sit vertically? I downloaded VLC Player, but that won't work either.
I use this trick to get the discs out...
http://www.cubeowner.com/forums/index.php?showtopic=13848
Also, I pulled my 450 apart and made sure the optical drive connector was seat properly.
Thank you in advance!

If you are the DYS kind of guy you can buy a replacement and change it yourself. While you are at it you can clean the coffee remaining inside your MBP.
Once the broken optical is out you can wash it with fresh water to get the sugar out and let it dry in the oven at very low temp (it's dead anyway) . You have a slight chance to get it working again. It worked with a cell phone for me...
And the classic answer is: Call Apple.
After I dropped a soup over one of my PB's I learned the lesson...

Optical drive won't work after spill

I recently did something very stupid and spilt some coffee on my macbook pro. I shut it off right away and let it dry out, and i was pretty lucky because everything seems to work fine except for the optical drive. Now the computer does not recognize there even being an optical drive. I was just wondering what the best course of action is to take now.
Thanks,
Dave

If you are the DYS kind of guy you can buy a replacement and change it yourself. While you are at it you can clean the coffee remaining inside your MBP.
Once the broken optical is out you can wash it with fresh water to get the sugar out and let it dry in the oven at very low temp (it's dead anyway) . You have a slight chance to get it working again. It worked with a cell phone for me...
And the classic answer is: Call Apple.
After I dropped a soup over one of my PB's I learned the lesson...

Optical drive won't work, won't eject

I've tried the namual eject hole at the side of the slot but for some reason, perhaps having to do with my rplacement of the hd, there is no spring eject whizmo to meet my probing paper clip. I am trying to load driver software for a Wacom graphire program. the slot puled the disk in, and there began its whirring. It did not read the disk. After a while the whirring stopped, still no cd icon on desktop. If I restart the computer, the whirring will resume, and then stop after a while. The "eject disk' option in the finder menu is grayed. Any other way to issue a command to the computer to eject the disk? Then...would one have suggestions about fixing the problem? Am I going to have to take the thing apart and get a net optical drive, and if so, how bad a job will that be?

Hey I'm new but I was given an iMac DV+ with a CD stuck inside AND supposedly my iMac was dead or broken...
If you took the time to investigate for an answer in the support documents you would have seen that they had a suggestion there..
1) turn you iMac on and at the sametime as it powers on press the manual eject with a paper clip (on the rightside - slot loading unit) this shoudl eject the CD.
2) But if it doesn't they suggest that you insert a CD part way in and it will dislodge the CD that's in there already.
Please go and look at the document for yourself for the exact description...
I did this and the CD eventually ejected slowly.... Do not insert your CD all the way in just part way... as instructed by Apple.
Hope this helps...

OPTICAL DRIVE WON'T WORK (PLDS DVD-RW DA8A5SH)

Hello all!I need some help everytime i insert a cd (dvd, movie, music, software, any kind!) in the optical drive the compute shows no response. I checked the Device Manager and it shows a yellow mark..Can someone please help me fix this?? And if I have to download the drive, where can I do it and how?? I hope someone can help methank you in advance!!! PS: Device shows this name PLDS DVD-RW DA8A5SH

How about if you right click that device in Device Manager and select Uninstall?
Then restart the system and see if it gets detected and installs automatically. Check after that.
Also, which laptop is this?

HT4718 optical drive doesn't work, hd is earesed and i need to install os x on my macbook pro

Hi there,
my questions are:
1.optical drive doesn't work, hd is earesed and i need to install os x on my macbook pro.
how to do it on internet?
2.already tried connected via lan cable, but folder with question mark appeared.What could be problem(DHCP was enabled)
3.Is it possible to do it in target disk mode through my even older powerbook G4
4. Is it possible to do it with flash memory , and how to download the stuff on?
thanks in advance
Allterro

If your Macbook Pro (MBP) came preinstalled with OS X Lion (10.7), you can use Internet Recovery to reinstall it.
You will need an Internet connection.
Restart your Mac using Command+Option+R until you see a spinning globe. This will boot into Apple's server and load their Recovery HD.
From the OS X Utilities menu, select Reinstall OS X. You should see a Lion logo to the left of this option.
If your MBP came preinstalled with OS X Snow Leopard you will need the DVD and an external CD/DVD drive to use to install it.
You may also be able to put your MBP into Target Mode with another Mac running a version of OS X that is compatible with your MBP. From that other Mac download OS X from the App Store and point to your MBP (Target Mode) to install to. I've never tried this but it sounds like it might work.

External dvd drive won't work on USB macBook air

External dvd drive won't work on my macBook air usb port. It works on older versions of air and iMac.
Any ideas. Tried the left shift, control, option and power button sumultaniously, but did not work.

I know that no one has replied yet, but figured out the issue. I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store. They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive. When I got home, I thought I would try one more thing. I hooked it up to a powered hub and it works perfectly. I'm not sure why no one else thought of it, but glad that I did.

Optical drive won't read certain discs?

Hello, this is my first post in the community and I am a novice with computers. I bought my iMac in 2010 at Apple and it has been the best computer I have ever owned. But for some reason starting today the optical drive won't read any type of cd's like a user's manual or software install disc. It tries but just ejects it back out. Now the strange part is I can put any dvd disc to play a movie and plays it perfectly with no problem at all. Has anyone had this happen to them or any thought on what is wrong. My wife has a macbook and hers works fine and I checked her system preferences for cd's/dvd and they are the same. I a running 10.6.8 OS. Thanks

The iMac supports the following CD types if it is one of these types and still won't read then it sounds like a CD hardware or software driver problem. If you re-load the software driver and it still doesn't work then I would then suggest you take it to an Apple store for repair.
http://docs.info.apple.com/article.html?artnum=34562

Macbook optical drive help, please?

My Macbook's optical drive won't accept CD's. It spits them back out. And for DVD's, it just makes a loud noise and vibrates and doesn't spit them out. So then I have to restart my computer and hold the eject button to get them out. Please help, I just got new CD's and movies for Christmas and am dying to play them. Thanks.

Here are Apple's troubleshooting steps......
http://support.apple.com/kb/HT2801

MacBook optical drive has started making noises at wake and restart

This MacBook is about 5 months old and the optical drive has just started making noises at wake from sleep, or at restart. There is no disc loaded in the drive, but the noise is as though a disc has been inserted in the drive and it is attempting to read it. This goes on for about 5 to 10 seconds, then stops.
The optical drive seems to work fine, reads CDs and DVDs no problem. This isn't a glaring issue, I'm just trying to determine if it is the precursor to a mechanical problem, or is possibly some sort of software glitch. Thanks for help if this rings a bell with anyone.

I posted this to a different thread earlier today. I will add that most of the experience I've had with this issue is in Tiger or Leopard. I don't think I've seen it yet with Snow Leopard. My instincts tell me it is more of a hardware issue than a software/OS issue. (Just my $0.02.)
I have seen this many times. (I support 100+ Mac Laptops, most are 13" MacBooks.)
Just to clarify, MacBook optical drives do normally make some quiet noises when waking from sleep.
When there is a CD or DVD in the drive, there are some soft sounds, and then you hear the disc spin up. When there is not a disc in the drive you hear a different sound. I assume it is relating to checking for a disc in the drive. To me, it sounds exactly the same as the quiet sounds you hear right before the "Good Chime" when you power up.
BUT, sometimes MacBooks make a much louder noise, that is similar the sound you hear when you insert or eject a CD or DVD, only sort of "doubled". Usually you hear it when waking from sleep, but I have also experienced it happen intermittently when the MacBook is turned on, under normal use, or not being used (but not sleeping or waking from sleep).
In the past, I have sometime cured it with a reset of the SMC and PRAM. This has not always worked. I have also seen it disappear after inserting a disc into the drive. Most of the time, the sound has returned some time later. I have called Apple on this issue several times, and sent the MacBook in for repair. My memory is that they have replaced the optical drive under AppleCare.
I will add that I have recently seen this Knowledge Base Article (below), with instructions for "resetting" the optical drive on a MacBook Pro, but it did work for me on a MacBook 13". Insert a disc halfway, take it back out, then put it in all the way.
http://support.apple.com/kb/TS2839
Past experience tells me not to be surprised if the noise resurfaces. My advice is call Apple if you have AppleCare, or if the MacBook is under one year old.
Good Luck.

Optical Drive won't power on

Hi everyone,
I have a Lenovo Thinkpad W520, and my optical drive won't power on. The problem is that it is by default set on "safe to remove", and when I want to use it, I have to remove it first and then put it back. BUT that won't work unless I reboot the machine after removal. I searched on this forum, but I did not find the solution for so far.
I found some topics on the optical drive, which describe that one can toggle an option for activating the optical drive in Power Manager, which I can not find in my version (6.36).
Is there any solution for this? I would like the optical drive to be powered on by default, and not in the "safe to remove" mode, so I can use it any time without having to remove the optical drive and rebooting the system.
Thanks in advance,
Jeroen
Solved!
Go to Solution.

Well....it may be fine for you to accept an inferior item, not I. I paid for a unit that was supposed to be fully operational and work as designed. I will not accept having to reboot every time I want to put a CD or DVD into my computer! That's like having to restart your car so the headlights work. Even if one doesn't drive at night, you would still expect the headlights to work ANYTIME you want them without the extra steps. I know "where" the issue is and I know "why" the issue is BUT unfortunately, there is not a fix I can find. Between uninstalling and reinstalling drivers and applications and etc. I give up. They will replace my unit according to Lenovo, with a brand new laptop. Should this one have the same issue, I will be disputing my CC charge, and sending the unit back to them for a full and complete refund. I wish I had a copy of WIn8 or Win7 without Lenovo's proprietary software embedded. I bet the unit would work as designed then, but to have them rewrite or add software with hooks directly into the core system is a recipe for disaster. I encourage you to do something about yours also. The more people that ALLOW this "type" manufactured fleecing, the more it will occur.
I guess I will find out just how well this replacement process works.

Optical drive won't eject and can't power off from Apple menu!

I have a Quicksilver that has almost always acted great but ever since I physically moved the machine to another room I've been having intermittent problems. Here's a quick summary:
-Overall more sluggish performance
-Occasionally the optical drive won't eject and I have to restart the whole machine. (I did replace the drive a couple years ago but have never had any problems until now).
-I can no longer shut down/restart from the apple menu, i have to push the power button in.
I used to get device removal error messages at inappropriate times but that seems to have stopped since I reseated my USB 2.0 card. Here's a list of the other remedies I have tried:
-Repair permissions
-Make sure all cards/RAM seated properly
-Replaced PRAM battery (year was displaying 1970)
-Ran DiskWarrior
-Re-imaged entire boot drive
I can't remember if I've tried zapping the PRAM because this problem has been going on for about five months. None of this was an issue before I carted the machine into another room so hopefully I haven't dislodged anything. Also, I notice a lot of static build-up in the room despite the hardwood flooring. Perhaps that could be an issue and if so, any suggestions?
I was dreading that it could be my logic board, any advice?
thanks,
Jesse

Well....it may be fine for you to accept an inferior item, not I. I paid for a unit that was supposed to be fully operational and work as designed. I will not accept having to reboot every time I want to put a CD or DVD into my computer! That's like having to restart your car so the headlights work. Even if one doesn't drive at night, you would still expect the headlights to work ANYTIME you want them without the extra steps. I know "where" the issue is and I know "why" the issue is BUT unfortunately, there is not a fix I can find. Between uninstalling and reinstalling drivers and applications and etc. I give up. They will replace my unit according to Lenovo, with a brand new laptop. Should this one have the same issue, I will be disputing my CC charge, and sending the unit back to them for a full and complete refund. I wish I had a copy of WIn8 or Win7 without Lenovo's proprietary software embedded. I bet the unit would work as designed then, but to have them rewrite or add software with hooks directly into the core system is a recipe for disaster. I encourage you to do something about yours also. The more people that ALLOW this "type" manufactured fleecing, the more it will occur.
I guess I will find out just how well this replacement process works.

Hi, I was just wondering how much it would cost to repair the rear camera of my iPhone 4s. I dropped it and it won't work and I hear something rattling inside when I shake it. How much would it cost to fix?

Hi, I was just wondering how much it would cost to repair the rear camera of my iPhone 4s. I dropped it and it won't work and I hear something rattling inside when I shake it. How much would it cost to fix?

If you have a tool, try removing the battery cover and chech out. Some times the camera pin may have been misplaced. If so, you can fix it yourself.

Dropped Macbook - optical drive won't work

Similar Messages

Maybe you are looking for