Dropped my itouch and now it wont connect to itunes, help?
^that says it all. it wont turn on and it wont connect to itunes. any help is much appreciated. it's an 8gb 3rd gen
Try the following to get iTunes to see the iPod so you can restore the iPod via iTunes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore
Howver, droppong the iPod may have caused hardware damage.
Similar Messages
-
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT1414 i just had my replacement iphone 5, and now it wont connect to itunes to activate
i just had my replacement iphone 5, and now it wont connect with itunes to activate
The servers are getting slammed. Bunch of people trying to download iOS7 at the same time.
There is a chance activation servers might be down/slow for now. Just keep trying throughout the day. -
Download ios 5.0.1 upgrade and now ipad2 wont connect to itunes
I downloaded the upgrade. iTunes said it was backing up my ipad-2. Some error happened and now all my iPad shows is the start-up screen telling me to hook the usb up to iTunes. iTunes doesnt recognize the iPad though. Tried the normal cycling of the iPad and restarting the computer in different ways but to no avail. I leave on a trip in 15 hours and really need my iPad. Any ideas?
Not sure what I did but it finaly recognized the ipad and it is restoring now.....
-
I haven't been able to update my phone to the latest version of iOS because i dont have enough room on my phone and i cant erase the pics from my photostream except for on itunes and its driving me crazy
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first... -
hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue. all other devices here are connecting normally. any ideas?
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK. -
Im having massive issues with my email... I cant receive emails for my work email... was working perfectly and now just wont connect, i assume that I need to use my home wifi as the outgoing server?? Please help
For your work email, do you use a well known server or do you use their own server? Their server IMAP and SMTP addresses might of changed or you entered them in wrong. It might be something with your router but unless you blocked every incoming connection, then it should work. I would talk to your tech guys at work to see if it is on their end.
Hope this helped a bit, Sean -
It is a 64 GB Iphone 5s and I am running Windows 7 x64 on all of my pcs.
I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly. It was connected to one windows 7 pc about a week ago and worked but now I tested it on 4 other computers including a macbook running osx and it isnt detected. I tried the whole Apple Guide and it was no help.install the latest version of itunes
-
Ive just updated my version of itunes and now it wont load the itunes store? Anyone know why? Worried about losing my library if i start trying to download again.
Hey NJ85,
Thanks for the question. If you are having issues connecting to the iTunes Store, this article may help:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks,
Matt M. -
I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?
I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?
-
i get error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!
Did you forget the passcode?
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/ht1808 -
I bought a song on my iPhone and now it wont download onto iTunes on my computer.
I bought a song on my iPhone and now it wont download onto iTunes on my computer, even when I checked for available downloads all it says is, "All purchases have been downloaded for ths Apple ID". What should i do?
Hello rahulseth,
I would recommend for these symptoms that you delete the song and re download it using this article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
That should resolve any issues with the downloaded file.
All the best,
Sterling -
25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her. I can access the iTunes store for all other options but not to update. How can I get her updated?
Try quitting the App Store:
Tap the home button to get to the home screen. Then double tap the home button, and hold your finger over the App Store icon. Tap the red when it appears. Tap the home button again to return to the home screen.
Try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. -
Just added a number of photos from my phone. It worked fine and I printed other photos but shut it down and Now it wont relaunch!! help.
I need a special tool just to access my own photos?
I suggested "Find any File" because it is easier to use than the Finder's search - the results there will depend, on what you have included in your Spotlight index.
To search using the Finder, open a Finder window; press the key combination ⌘F, and then set the search window to search "This Mac" and "Kind is 'Photo Library'"
Only, if the library should have become corrupted, this may not work. And the search will not look inside the packages.
The whole iPhoto library directory is only 556 MB so I guess the videos are lost for good.
How is the "Importing > Copy items to the iPhoto Library" flag set? See my last post.
If you imported with "store files" in there original location, the photos and videos will have remained on the card, until the crad has been erased.
Is there a way to start iPhoto from scratch so at least I can start over and have it not destory all my data next time?
You can create a new iphoto library, by using the command "File > Switch to Library > Create New".
Is there way to import my photos and videos without using iPhoto?
You can use the utility "Image Capture", that comes with every Mac to import your photos to folders on your Mac.
This program is horrendous!
I never had problems with it and like it, but I understand .... -
Someone put my iphone passcode in wrong to many times and now it says connect to itunes there is some stuff on my iphone which i havent backed up and i will loose if i restore my iphone what do i do?
If the phone is disabled, you have no choice but to restore it. You will lose the data that was not backed up.
the passcode did its job exactly as it was supposed to do.
Maybe you are looking for
-
Hi newbie here . .
Hi everyone (Sorry if this post is in the wrong thread but am just getting sorted). Newbie here and having just swapped from a Windows machine to my mac I am finding a problem with itunes. Please in words of one syllable . . could some one please say
-
Unable to view Business areas even after giving administrator rights
Hi All, I have been given permission as administrator i.e all privileges are given. All roles have been selected for that particular user. When I tried to access the userid I get a message 'Does not have access to any EULs ...' . But when my administ
-
Is there a way to wirelessly connect my Airports?
I have an AirPort Extreme and just got an Airport Express. How do I connect them wirelessly so I don't need to connect them by Ethernet cord?
-
Syntax error in upgrade version 7.0
Hi , how to close this error in upgrade 7.0 ? Lista is a structure having more than 10 fileds. READ LINE lista INDEX sy-tabix. Error : Lista may not be converted to number . This error doesnt exists in 4.6 version Moderator message: please stop flood
-
Save multiple channels to binary?
I am trying to save multiple channels of analog signals measured using DAQ express. I want to save the waveforms to binary and be able to read them back to re-create the waveforms at a later time. I have tried writing the waveforms to binary as dynam