Dropped packets between Catalyst 3550 & Windows 2000

I have a test network set up - with a 3550 switch, with a couple of Vlans configured.
I have an Windows XP laptop & desktop connected - all is ok.
If I connect up any Windows 2000 laptop/desktop then I find I get a connection but I find that I'm dropping packets....at about 10% when pinging devices on on other networks.....or pinging devices on the same vlan.
This is not a port issue or cabling issue ......it seems to be related to the Operating system in some way. I've tried changing the duplex & speed at both ends....same result.
Any input is welcome !

I know this sounds odd.....but I have tried all settings of duplex & link speed between the switch & the W2K machines......if I place an XP machine on this same port then it works fine.
The fact that XP works means the cabling is ok.
I guess I'll update the nic drivers see what that brings....and maybe look at an IOS upgrade on the switch - currently 12.1 (22) EA5
With two XP machines & one W2K machine on the switch - pinging from W2K to XP results in dropped packets......of approx 10% - between the two XP machines is ok. When pinging from either XP to the W2k - "Request timed out"

Similar Messages

Drag and drop attachments between two email windows

Hi together,
my problem is easy. i cannot drag and drop attachements between two email windows using Apple Mail. On my old MBAir it was no problem. I do not know which configuration i have to change. To drag and drop to the desktob is no problem. Now i have to drop an attachement on the desktop to attach it to a new mail. This cannot be the solution :-) Please help me.Thank you.
Noobie :-)

There is no configuration for it. It should work.
Can you try it in a different user account. If it works in a different account, then it is likely something in your current user account that is messed up. If it doesn't work in another user account, then it is likely something with Mail, itself.
You could try downloading and installing the 10.6.7 combo update. That may repair what is wrong.

NtfsServer problem on Windows 2000 Advanced Server

I've installed Oracle 8.1.6 and iFS 1.0 on Windows 2000 Advanced Server. Everything else seems to work fine with iFS, but the NtfsServer always fails to start up.
Is this a compatibility problem between Oracle and Windows 2000? I have no drive letter O: so it should be free for iFS to use.
Here is the last entry from NtfsServer.log:
Sun May 28 19:47:07 GMT+03:00 2000
iFS NT File Server Version 1.0.8.1.0 Production
Sun May 28 19:47:07 GMT+03:00 2000
ServerName(id): NtfsServer(6508)
server: NtfsServer
username: system
AnonymousUsername: guest
DriveLetter: o
NtfsSessionCache: 40
OptimizeStartup: true
LogLevel: 1
LogStackTrace: true
net start OracleIfsd
Return code = 0
ifsmount o
Return code = 1
SR Event: ID:6757 PENDING SPECIAL SUBTYPE:13 6766L
SR Event: ID:6757 COMMIT SPECIAL SUBTYPE:13 6766L
(0) Unable to open IFS device
ifsdismount o
Return code = 2
Cache performance for session cache
CurrentSessionCount=0
HighestSessionCount=0
CurrentSessionCache=0
Performance of readonly connection pool:
MinimumSize=5
TargetSize=20
MaximumSize=100
TargetSizeTimeout=1000 ms
MaximumSizeTimeout=10000 ms
CurrentSize=5
AllocatedSize=0
ImmediateAllocationCount=4
DeferredAllocationCount=0
FailedAllocationCount=0
AverageAllocationTime=0 ms
Performance of writeable connection pool:
MinimumSize=5
TargetSize=20
MaximumSize=100
TargetSizeTimeout=1000 ms
MaximumSizeTimeout=10000 ms
CurrentSize=5
AllocatedSize=0
ImmediateAllocationCount=2
DeferredAllocationCount=0
FailedAllocationCount=0
AverageAllocationTime=0 ms
Cache performance for S_LibraryObject cache
CACHESIZE=65
OBJECTCOUNT=65
PUTCOUNT=130
REMOVECOUNT=0
FINDCOUNT=370
HITCOUNT=237
MISSCOUNT=133
HITRATIO=0.6405405405405405
MISSRATIO=0.35945945945945945
Cache performance for FolderPath cache
CACHESIZE=0
CacheSizeEstimate=0
ACCESSSEQUENCE=1
SequenceAtLastPurge=0
PUTCOUNT=0
REMOVECOUNT=0
PURGECOUNT=0
FINDCOUNT=0
HITCOUNT=0
MISSCOUNT=0
HITRATIO=1.0
MISSRATIO=0.0
Cache performance for committed S_LibraryObjectData cache
CACHESIZE=329
CacheSizeEstimate=329
ACCESSSEQUENCE=3
SequenceAtLastPurge=0
PUTCOUNT=329
REMOVECOUNT=0
PURGECOUNT=0
FINDCOUNT=685
HITCOUNT=356
MISSCOUNT=329
HITRATIO=0.5197080291970803
MISSRATIO=0.4802919708029197
Cache performance for LibraryObject cache
CACHESIZE=65
OBJECTCOUNT=65
PUTCOUNT=65
REMOVECOUNT=0
FINDCOUNT=73
HITCOUNT=8
MISSCOUNT=65
HITRATIO=0.1095890410958904
MISSRATIO=0.8904109589041096
iFS NT File Server terminating
null

I have the exact same symptoms on a Win2000 Pro development machine. fails at ifsmount,same as you...

Separate between windows 2000 and xp

Hi!,
In Zenworks 3.2 I want to filter between Windows 2000 and Windows xp
machines. As a result I want Windows 2000 machines to be imported in a
different container then Windows xp machines, but unfortunately windows
2000 en windows xp are on one tab. How do i separate?
Do i need zen 4 or some kind of snapin?
TIA
Peter
Peter Taal
HagaZiekenhuis,locatie Rode Kruis
Afdeling Informatisering en Automatisering
mailto:[email protected]

Okay Thanks for your reply.
But what about nal objects? For example Microsoft patches. You don't want Xp
patches to be rolled out on 2000 machines. So filtering on file existence is
the only way?? for example C:\windows\explorer.exe for xp and
C:\winnt\explorer.exe for 2000.
Deyan Stoykov schreef:
> In order to do that you need 2 instances of the workstation import
> service, each running on a different server and pointing to a different
> server policy package object. Then point 2000 stations to first server's
> hostname/ipaddress and xp stations to second server's
> hostname/ipaddress. You can do that manually or you can use 2
> application objects to populate the hosts file or the registry entry at
> "HKLM\Software\Novell\Workstation Manager\Import Server" - one for 2000
> + one for XP and set the system requirements -> operating system for
> both objects respectively.
>
> HTH
> Deyan
>
> P.Taal wrote:
> > Hi!,
> >
> > In Zenworks 3.2 I want to filter between Windows 2000 and Windows xp
> > machines. As a result I want Windows 2000 machines to be imported in a
> > different container then Windows xp machines, but unfortunately windows
> > 2000 en windows xp are on one tab. How do i separate?
> >
> > Do i need zen 4 or some kind of snapin?
> >
> > TIA
> >
> > Peter
> >
> > --
> >
> > Peter Taal
> > HagaZiekenhuis,locatie Rode Kruis
> > Afdeling Informatisering en Automatisering
> > mailto:[email protected]
Peter Taal
HagaZiekenhuis,locatie Rode Kruis
Afdeling Informatisering en Automatisering
mailto:[email protected]

PeekByte exception between sunos 5.9 and windows 2000

Hi.
I have a server running on sunos5.9.
When my client, running on windows 2000, tries to read from the server with readObject() I get EOFException.
The client works perfectly when running the server on a windows 2000 machine.
appreciate help or hints

Here is my stacktrace. Thanks by the way for taking time...
java.io.EOFException
     at java.io.ObjectInputStream$BlockDataInputStream.peekByte(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.readObject(Unknown Source)
     at se.pakonsult.maps.client.util.ServerInteractor.sendToServlet(ServerInteractor.java:251)
     at se.pakonsult.maps.client.util.ServerInteractor.getServerReply(ServerInteractor.java:95)
     at se.pakonsult.maps.client.registration.DiagramPanel.getDiagram(DiagramPanel.java:406)
     at se.pakonsult.maps.client.registration.DiagramPanel.actionPerformed(DiagramPanel.java:294)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.Dialog$1.run(Unknown Source)
     at java.awt.Dialog.show(Unknown Source)
     at se.pakonsult.maps.client.registration.window.overview.OverviewPanel.showDiagram(OverviewPanel.java:3087)
     at se.pakonsult.maps.client.registration.windowgroup.TabPanel.showDiagram(TabPanel.java:510)
     at se.pakonsult.maps.client.registration.InternalFrameMenuBar.showDiagram(InternalFrameMenuBar.java:956)
     at se.pakonsult.maps.client.registration.InternalFrameMenuBar.actionPerformed(InternalFrameMenuBar.java:1141)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)

Using Catalyst 3550 Switch with Linksys Home Router and Cable Internet

I've about pulled what little hair I have out of my head on this one, and need some configuration help.
I have a Cisco Catalyst 3550 switch with five Windows 7 desktops, an Avaya PBX and five Avaya IP phones attached. All of these devices are on a 192.168.0.0/24 subnet, and are communicating properly. I will refer to this as network # 1. I also have SEPARATE network, we'll call network # 2, using AT&T ADSL service and a Netgear 4-port/wireless router/ADSL modem combo device, which is functioning properly with a couple of other Windows 7 desktops over its own wired Ethernet network, using DHCP, and also on a 192.168.0.0/24 subnet. I thought it would be a simple integration, just plugging one of the 3550's ports to one of the DSL router's ports, in order to give the five Windows 7 desktop computers on network # 1 internet access via the DSL modem. Guess I was wrong. When I connect the two switches together, although I get a good connectivity (green lights on both ports) and am able to ping the DSL router's gateway address (192.168.0.252) from network # 1's computers, the computers on network # 1 cannot access the internet. Also, the working computers on network # 2 lose their internet access as long as the two switches are connected together. I am not a Cisco guru, but there's got to be a way to make this scenario work. Can someone provide me with a 3550 configuration that will allow me to extend my internet service from network # 2 on the DSL router to my 3550 switch and their computers? Here's what I am looking for:
INTERNET ---> ADSL MODEM ---> NETGEAR ROUTER ---> CISCO 3550 SWITCH ---> NETWORK DEVICES WITH INTERNET ACCESS

The Netgear router is probably what's doing the natting. Is the 3550 configured for routing or is it straight L2? If you have the 3550 configured as L3, then it's going to be easy to do what you want. Just add a static route on the Netgear to point the subnet that it doesn't know about to the 3550. For example, if the Netgear is addressed at 192.168.1.1 and the Cisco 3550 is addressed at 192.168.1.2, but it also knows about the 192.168.0.0/24 (separate vlan), then you would put a static route on your Netgear for 192.168.0.0/24 to go to 192.168.1.2.
The way that I would do it is to create a separate vlan on the 3550 and assign an address to it. Once you do that, make the port that the other switch connects to an access port of that vlan. (It would need to be on the same subnet as the existing equipment.) All of your devices would use it as a default gateway and then you would do the rest as above. You could also use RIP between the Netgear and Cisco if you can't do static routing.
HTH,
John

Media Sync and Windows 2000

Hello,
I'm using for few days a BlackBerry Curve 8900 with a PC under Windows 2000.
Did anybody kept the installation package for Media Sync V2, which seems to be compatible with Windows 2000 ?
Only the V3 is available on the BlackBerry site.
Thanks !

MMedland wrote:
Hello,
Apparently windows 7 and media sync do not currently work together. What I mean by this is that when installing Blackberry Media Sync I receive a message explaining to me that "an unsupported operating system was detected. The following operating systems are supported: Windows XP Service Pack 2 and Windows Vista." After this, the installation explains that it will now exit without setting up. Is there something that I can do to get around this. I mean obviously I can just remove the SD Card and insert it into my laptop that way to make change but I would much rather be able to make changes to my media through the Desktop Manager.
Thanks for any help in advance.
Hi and welcome to the forums!
You can use a PC to transfer info between the PC and the media card.
Basically you will attach the USB to the BB and the PC. Don't use desktop
manager. Go to "My Computer" on the PC and the BB will show as a flash drive.
Then you can "drag and drop" files to the BB.
Use the following settings in the memory option of the Storm:
Media card support ON
Encryption mode NONE
Media transfer protocol ON (Storm and Bold only)
Mass storage support ON
Auto enable Mass storage support when connected ON
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Policy-map on catalyst 3550

dear all,
how to configure policy-map on catalyst 3550 to shapping bandwidth. I've tried to setting that police-map in one of interface, but when I wrote sh policy-map interface fa0/1, in class-map field, the result are
class-map: policeIn (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
match: access-group 112qm_police_inform_feature: CLASS_SHOW
Could u give me a clue..??
thx.
..::rhiez::..

hi,
i've checked statistic of interface and there is traffic on that interface :
Hardware is Fast Ethernet, address is xxxx.xxxx.xxxx.xxxx(bia xxxx.xxxx.xxxx)
MTU 1500 bytes, BW 512 Kbit, DLY 100 usec,
reliability 255/255, txload 102/255, rxload 42/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 100Mb/s
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:03:16
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 85000 bits/sec, 67 packets/sec
5 minute output rate 961000 bits/sec, 201 packets/sec
12965 packets input, 2137646 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
38564 packets output, 23504798 bytes, 0 underruns
0 output errors, 46 collisions, 0 interface resets
0 babbles, 0 late collision, 62 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
is there another way to shapping bandwidth per vlan or per port interface on catalyst 3550 with IOS 12.1(8).
thx.
..::rhiez::..

PC Suite + Windows 2000

I dont know if anyone will be able to help but i was wondering when the support for windows 2000 was removed from the pc suite application and why nokia chose to do this?
Solved!
Go to Solution.

Many large firms still use Windows 2000 and I think it is a bad mistake to drop the support for it.
I got a new E66 business phone. I installed the PC Suite which came with the phone to my business laptop which has windows 2000 professional. But I cannot upgrade the E66 by using this PC Suite because it is not supported on this operating system.
Every time I start my laptop I get a message that PC Suite has updates availble. After downloading the update it end because this operating system is not supported.
From the net I can find PC Suite versions 7.0.7.0 and 7.0.8.2 which are claimed to support Windows 2000. After downloading these 34 meg packets the installation ends to a message "this operating system is not supported".
This sucks.

Catalyst 3550 & 3560/3750 command 'show mls qos interface statistics'

On the Catalyst 3550 the command 'show mls qos interface statistics' will show ingress packet (or byte) counts with DSCP values. If you have policers configured then it also shows a count of packets that have been marked down to another DSCP value due to policing or any that have been dropped (obviously 'mls qos monitor dscp x' needs configuring). The same command on the 3560/3750 only shows the ingress & egress DSCP values, there is no column that shows packets (or bytes) that have been policed or dropped. Is there any command to display the same information with the 3560/3750?
Neither platform show counters when the command 'show policy-map interface x/x' is used so this won't work.
Thanks
Andy

Hi, I believe there is a command on the 3560 'sh mls qos interface policers' may be what you are looking for.
Here is what the command says it outputs:
To display QoS information at the interface level. This information includes:
The configuration of the egress queues and the CoS3-to-egress-queue map
Which interfaces have configured policers
Ingress and egress statistics, which includes the number of bytes that have been dropped

Windows 2000

I've just switched computers at work. My new computer is several times as fast as the old one, with sixteen times as much memory - but unfortunately it's running Windows 2000 rather than NT. I can only presume that this is the reason why in spite of all the extra power the rather fine programmer-oriented text editor Jext (www.jext.org) now runs way slower than before. Also, the text in the program is now so mangled as to be barely readable - it looks as if it's been anti-aliased and then all the pixels which weren't pure black have been dropped, or something. It's appalling.
Is this all part of Microsoft's ongoing anti-Java campaign, or is there another explanation? Is anyone else having similar problems? Does anyone have any idea how to fix the crazy text thing? Does it occur with other programs or is it jus Jext?

It turns out the screwed up writing was partly a result of my display being in 16-bit colour mode; going up to 32-bit and restarting Jext fixed the problem. It feels like it's going slightly faster as well, for some reason.

Ipod works on Windows 2000 but not on XP

I have an empty Ipod click wheel unit . My Itunes library (about 1200 songs) is safely stored on cd's. I have Windows 2000 in the office and Windows XP at home. If I take the cd's and the Ipod to the office, I can get it to run perfectly. I restore the cd's to Itunes and upload them to my Ipod with no problems at all. When I bring the unit home, and plug it into my XP home system, it seems to have great difficulity recognizint the Ipod at all. The Ipod image pops on and off the my computer screen. If I fiddle with the Ipod for a while,just randomly selecting menu items, sometimes I can get it stabilized, at which point I get a message that it is sync ed to another computer. I try to resync it - sometimes it stays up and sometimes it drops out. If it stays on line, the Ipod sync window appears on the screen, and I get an immediate message "upload complete" from my empty Itunes library. I then load a cd to put something in the library to actually sync with, and it loads perhaps 10 or 15 items then I get a message "The Ipod - Patricia's Ipod can not be updated - The required file can not be found" It stops and nothing else will happen. I have tried different plugs, changing drive letter assignments, reloading firmware, complete restore, 5R's, everything I could find, but still I have no luck. My husband has a new Ipod video which operates perfectly with the same XP computer. So, why does it work perfectly with Windows 2000 and not at all with Windows XP?

Check your firewire connection and/or Windows firewire driver. This is done in Device Manager.

9iFS R2 on Windows 2000 repeated install failure - help !!

Hi All,
here is a desperate plea for help with 9iFS R2 on Windows 2000, service pack 2, the story so far ....
1) clean install of windows 2000 with service pack 2, network configured and working.
2) install Oracle 9i R2 database and configure tnsnames.ora and sqlnet.ora as per the oracle by example documents for R2
3) reboot machine and all service come up fine
4) install Oracle 9i R2 Application Service with option A to just install web server and cache stuff. This is installed in its own oracle home, all seems fine, reboot the machine.
5) all the services come up fine ( so far so good eh !! )
6) follow the pre-installation for 9iFS R2 ( as per the solaris install notes as i can't find any windows specific ones ). This includes the creation of a tnsnames.ora file in 9iashome\9ifs\network\admin, checking of the configuration required for 9iFS, all seems fine. Reboot the machine and all services come up fine.
7) start the 9iFS install, this is installed into the 9ias home as per the instruction. Install proceeds, enter config information, various connection tests are performed ok, and then we get to the 'configuring oracle 9iFS' screen which has a whole load of tasks which the installer then works its way through. When it gets to the 'executing setup scripts' option ( second from bottom ) it immediately throws a java exception, about 'file access denied', 'unable to create ifs directory' with no error code or anything else. The configuration screen then exits, and says installation complete successfully ! As you can imagine it hasnt, and nothing is configured. I have repeated this 4 full times now, reading the oracle install docs very carefully. Same thing every time. However, and this is the strange part. If at that point, I uninsall 9iFS using the oracle installer, and then try and reinstall 9iFS again, when it gets to the section of where to create the schema, and i tell it the same IFSSYS as the one created previously, it will then warn me its going to delete it and create a new one with the same name. I select 'yes' create it again and this time the install completes with no errors ! Hurray you think, ahhhh BUT....
8) reboot the machine, start up the browser to point at the local machine port 1810, and log in successfully. Then select the node on port 15x41 ( sorry cant quite remember port number ) as per the post installation docs, and told to 'launch it'. This i do, providing the administration account user name and password which has been used to install everything so far. Explorer sits for about 60 seconds then returns to the screen with the portal node still down. I have tried starting the node and domain to no avail, both fail to start with no reason for the failure and nothing in the 9iFS\logs to explain whats failing - sigh.
OK the questions
1) why do i initially get this file access denied problem so failing the install - is this a known windows problem ?
2) When i do get the install to complete by reinstall 9iFS and rebuilding the schema can I not then start the node or domain ?
In effect I am installing all these on a single machine with 1 Gig of memory for evaluation and prototyping as a possible Document Management System which we can build custom solutions upon. With being unable to install it at all we are at a total loss. Can some one save my sanity and remaining hair and offer some help/suggestions as to why this is not working ?
best regards
Tom

Thomas,
thanks for your hints, it helped me quite well getting iFS installed on my machine! But when I try to start iFS from the administration GUI I do have excactly the same problem like you:
start up the browser to point at the local machine port 1810,
and log in successfully. Then select the node on port 15x41
as per the post installation docs, and told to 'launch it'.
This i do, providing the administration account user name and
password which has been used to install everything so far.
Explorer sits for about 60 seconds then returns to the screen
with the portal node still down. I have tried starting the
node and domain to no avail, both fail to start with no reason
for the failure and nothing in the 9iFS\logs to explain whats
failing - sigh.At first my thought was iAS might have problems with special characters in the admin's name or password (due to security guidelines we had to change the admin's name). But also with alphanumeric name and password it doesn't work.
Furthermore, also starting iFS using the BATch files doesn't work always. The services seem to start up correctly, but I'm not able to connect via share, FTP, HTTP or anything.
It got worse when I accidently called "ifsundeployear.bat": after that I no longer was able to redeploy the iFS's EAR, I only get error messages complaining inconsistency between local config files and the repository. Logfiles didn't help at all. So at the moment I'm reinstalling everything once more, sigh.
Did ANYONE get iFS started the way it's supposed to be under Windows 2000?
+Lutz

Install oracle 8.0.6 with Windows 2000

hello all,
today we have oracle 8.0.6 on NT Server ...
we need install the same release oracle 8.0.6 on new IBM server, with Windows 2000 Server ...
we are looking information about differences between config oracle 8.0.6 in NT Server and Windows 2000 Server
thanks in advance
rodolfo

My tnsnames.ora file is using SID and not SERVICE NAME.
The configuration is the same as the other NT server I am using, this is actually a new server we are trying to replace the production with. The only difference is the OS so far. I looked at all the configuration files and the only error I get is that TNS 12203 error when I try to connect to Oracle.
When I try from any client it does the same thing, TNS 12203 and no connection to database.
Could it be the OS, or does anyone know anyone that has Oracle 8.0.6 on a 2003 Server Box.
Thanks for your help guys.

RE : Drag and Drop operations between two outlinefields

Hi,
Has any one tried the drag and drop operations between two Outline widgets ina
window.Any help appreciated.
Thanks
balsubHi Balsub,
Here are some lines which can help you :
First of all, your 2 OutLineFields must be in a draggable state.
In the event loop of your window, you have to listen to the event
ObjectDrop
on the 2 OutLineFields :
When Self.<MyOutLine1>.ObjectDrop(SourceX = SourceX,
SourceY = SourceY,
SourceField = SourceField,
TargetX = TargetX,
TargetY = TargetY,
TargetField = TargetField) do
When Self.<MyOutLine2>.ObjectDrop(SourceX = SourceX,
SourceY = SourceY,
SourceField = SourceField,
TargetX = TargetX,
TargetY = TargetY,
TargetField = TargetField) do
Then, when you receive this event, the LocateNode() method will give you
the DisplayNode which is beeing dragged :
(assume that your OutLineFields are mapped to the class named :
ClassOutLine,
and Col is an Integer which is not important here)
TheSourceLine : ClassOutLine;
Col : Integer;
TheSourceLine = (ClassOutLine)((OutLineField)(SourceField).LocateNode(X
= SourceX,
Y = SourceY,
Column = Col));
If you want to remove this line from the Source OutLineField :
TheSourceLine.Parent = Nil;
TheSourceLine.UpdateFieldFromData();
If you want to insert this line at the end of the Target OutLineField :
TheSourceLine.Parent = (OutLineField)(TargetField);
TheSourceLine.UpdateFieldFromData();
And if you want to insert this line before or after the Target line of
the Target OutLineField :
TheTargetLine : ClassOutLine;
TheTargetLine = (ClassOutLine)((OutLineField)(TargetField).LocateNode(X
= TargetX,
Y = TargetY,
Column = Col));
TheTargetLine.PrevSibling = TheSourceLine; // Insert the source line
before the target line
or
TheTargetLine.NextSibling = TheSourceLine; // Insert the source line
after the target line
TheTargetLine.UpdateFieldFromData();
I hope this help you !
- Manuel -
Manuel Deveaux
Forte Developer
Mutuelle Préviade
FRANCE
E-Mail : [email protected]
-----------------------------------------

There is no configuration for it. It should work.
Can you try it in a different user account. If it works in a different account, then it is likely something in your current user account that is messed up. If it doesn't work in another user account, then it is likely something with Mail, itself.
You could try downloading and installing the 10.6.7 combo update. That may repair what is wrong.

Dropped packets between Catalyst 3550 & Windows 2000

Similar Messages

Maybe you are looking for