[Dropped] vdautomount fails to find the machine

Hello,
I'm using virtualbox-bin 4.3.20r96996, so I'd like some time to inspect some file into the VDI. Then I installed vdfuse but, the mounting still awful.
The python2 script vdautomount is not able to find the machine name nor the UUID.
All of these functions are based on the VboxAPI, found in the python2 libraries, but while VBoxManage gets the info, the script is some kind of trouble and even I tried to use some of the classes, then they fail.
Anyways, vdfuse mounts my VDI, but still some missing step to have the access to the file system. I hope that vdautomount will do it for me. Unfortunately I'm scarcely able to get vdautomount work.
Here's the report.
Any point ?
Last edited by TheSaint (2015-01-19 04:52:11)

I did:
$ mkdir /tmp/XPvdi
$ sudo vdautomount "xp" /tmp/XPvdi/
Usage: vdautomount [options] machine-name-or-uuid mountpoint
vdautomount: error: couldn't find machine "xp"
$ VBoxManage showvminfo xp |grep -i uuid
UUID: 67ed29f5-7d85-4322-aa6c-2a49110884d4
Hardware UUID: 67ed29f5-7d85-4322-aa6c-2a49110884d4
SATA (0, 0): /mnt/Store/Vboximg/Electron-14-08-11.vdi (UUID: 1f996f93-9f59-4c3c-a9f9-dab62b9c3df0)
$ sudo vdautomount "1f996f93-9f59-4c3c-a9f9-dab62b9c3df0" /tmp/XPvdi/
Usage: vdautomount [options] machine-name-or-uuid mountpoint
vdautomount: error: couldn't find machine "1f996f93-9f59-4c3c-a9f9-dab62b9c3df0"
$ vdfuse -f /mnt/Store/Vboximg/Electron-14-08-11.vdi /tmp/XPvdi/
$ ls -l /tmp/XPvdi/
total 20968141
-rw------- 1 user users 10737418240 17 gen 15.46 EntireDisk
-rw------- 1 user users 10733958144 17 gen 15.46 Partition1
Even I switched to community/virtualbox, deleted all /home related files and reinstall vdfuse, the problem hasn't change anything. The problem isn't the vdautomount script, but is rather the python2 vboxapi toolkit.
Can you show me
VBoxManage showvminfo "My VM Name" |grep -i '(uuid'
I don't think is a issue related to the path, the VBoxManage hasn't it.
EDIT
I inspected vdautomount and I found that is just a mere helper to find a named VM and pass the path to vdfuse execution.
My mistake was to expect that the script could find the name VM and mount it in loop, so it is possible to access the files in the partitions.
Beside that, vdautomount doesn't work, I'm giving it up, it fill not my expectations.
Last edited by TheSaint (2015-01-18 06:42:18)

Similar Messages

RAID Fails to find the first device

Hello all.
This is my first post to the forum. I did a brief search but i couldn't find any good results, so i tought i'd post my prob here.
I have an MSI K7N2 Delta2-LSR motherboard, with a 450W PSU (i don't have any more info on that yet), 2x512MB RAM DDR 400 (no more info on that one yet either), 2x120GB SATA WD HD, 1xDVD TEAC, 1xDVD+-RW SONY DL, 1x1.44MB FDD, an ATI RADEON 9600 PRO ALL-IN-WONDER VGA card on an nForce chipset.
The first HD has WinXP installed on it with the raid drivers installed properly. The second HD has Mandrake 10.1 Linux installed on it. They are installed as separate arrays.
The problem I'm having is that while I'm working in Windows, after a while the computer completely freezes. The only possible way out of it is to reset the machine. After I do that, at the boot screen, it fails to find the first HD (the one with WinXP on it). If i turn it off for let's say 5 minutes, and boot up, it detects the HD again and goes on loading windows. After I log in i have at maximum 5 minutes before it freezes again.
It does this every time. The more time I leave my PC turned off, the longer time it will take to freeze again when I'm logged in WinXP. I formatted the HD many times, installing every possible combination of my drivers but the problerm persists. Although it has never happened anything like that in Linux.
Could it be the RAID Controller (onboard), the WD HDD, or the Motherboard in general?
What can I do to find out what the problem is? And if possible, how to solve it?
If more info is needed, I will update the info of my pc as soon as I get back home.
P.S. I cheched the WD HDD, using WD tools like Disk Diag, etc. It never gave me any problems. I also used UBCD for win, and cheked the disk, to dicover once again, that the disk supposingly has no problems.
Any help would be appreciated.
Thanks in advance.

of its label Power Supply Guide
i suspect the drives bad
go to wd site and look for their drive tester

Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,

Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj

How to find the machine name

How to find the machine name from which the table is created ?
Yogesh

Turn on DDL auditing.
http://www.oracle-base.com/articles/10g/Auditing_10gR2.php outlines some uses ... i'm sure you can find more with a google search.

How do i find the machine ID number on my computer?

how do i find the machine ID number on my computer?

That's the serial number, but not the model/machine ID. The latter looks like this:
Model Identifier
MacBook7,1
It is not displayed in About This Mac. You need to use the System Profiler.

Multicast fails: Cannot find the file specified

I have a deployment share that works great for unicasting, and I've now tried enabling multicast in preparation for a big rollout. The namespace was created successfully in WDS, and I've made sure my switches have IGMP snooping enabled, (multicast
with Ghost works), however the process always falls back to unicast.
LTIApply.log has this to say
<![LOG[------ Applying Windows image using ImageX.exe ------]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI applying image \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim using ImageX]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41023 sent: LTI applying image \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim using ImageX]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property SourcePath is now = \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\ReferenceImage]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 1672)]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1672)]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1672)]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Windows Deployment Services Multicast Client [Version 6.3.9600.16411]
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Copyright (c) Microsoft Corporation. All rights reserved.
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Started.
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Complete [0x80070002].
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Operation Failed. [0x80070002].
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > The system cannot find the file specified.
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = -2147024894]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer could not be completed, rc = -2147024894, falling back to using \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
During the deployment, I checked C:\MININT\Operating Systems\ReferenceImage, and sure enough the folder was empty. Any thoughts on why this process would be failing, or why it needs to even transfer the image file locally in the first place?
Gracias

Not sure what is going on here, not enough logging. Have you tried enabling WDS logging on the server side?
The WDSMCast.exe tool can't find the file on the server side, you might want to verify that the namespace was created correctly. The "DeploymentShare$" namespace should point to whatever local directory is on your machine.
wdsutil /get-allnamespaces
http://technet.microsoft.com/en-us/library/cc742155.aspx
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

CRS oui failed to find the node

Hi every friend,
I am trying to install the CRS on 2 solaris 9 (VERITAS CFS). But when the oui came to the page "Specify Cluster Configuration" page, The OUI can not find any node and also the ADD, EDIT , REMOVE three buttons unpressable with grey color. From the help I know that when OUI detect the third-party vendor clusterware, It will use the node infomation obtained from third-party vendor clusterware and these infomation is not able to be edited by OUI. But it seems that it can not obtain anynode infomation. I had ping the PUB/PRIV IP of both node and they are accessible. How can I make the OUI to find the node infomation?
Thank you very much!

Hi,

Yes, it is. 
Environment >> Servers >> jmsserver2 >> Configuration >> General > Machine : sv-jms2

regards
 Lukas 
 WLS 9.2

DeskI schedule often fail Cannot find the 'Universe' universe. (DA0011)

Hello,
I have a user with 25 reoccurring daily schedules. Out of these one or two will fail daily with the error "Cannot fine the 'Universe Name' universe. (DA0011). It is not always the same reoccurring schedule that fails. It fails on any of our four DeskI nodes, and the times it fails are not consistent.
It is only happening for instances against one universe. When I setup a schedule for myself with the same parameters, it completes successfully.
Business Objects Enterprise XI 3.1 SP3 FP5
AIX 5.3
Excel format to email.
This appears to have started happening in October, but I have not been able to find a reason why it is happening.
Thanks!

Ryan:
Were you ever able to resolve this issue? We are having the same issue where random schedules will fail with the message cannot find the 'Universe' universe. (DA0011). We know it is not a rights issue as we 3,000 + schedules going against the universes and only a handful will fail each day with this error.
We are on XI 3.1 SP4, it does not make a difference if the output is excel, text or PDF it happens
Brad

Fail to find the file include

I am building a game and I just simply use a txt file to store the level reached.
Everything goes smooth but today I find something wrong.
I have included a levelrecord.txt in the included files section in iphone iOS setting.
But I find that after the app was installed, the apps can't read the number inside the text file, so I write the following codes to test in my iphone.
var testfile:File = File.applicationStorageDirectory.resolvePath("levelrecord.txt");
showtesttext.text=String(testfile.exists);
It returns False.
But after I play the first level, the text file is updated and then the above codes return True. And the apps can successfully update the level.
However, if I uninstall the app and reinstall it, the problem comes again and the number had to be read after I play the first level.
Did I accidentally change any settings therefore my text file is not included in installation? Because it works before, but I don't know when it started to have problem...
Thank you very much!

Maybe the last message in this page might help?:
http://forums.adobe.com/thread/728997?decorator=print&displayFullThread=true

Wd: failed to find the client

Hello!
I'm using linux-ck-corex kernel and systemd. I'm having problems with watchdog (I guess so).
I can't figure how to fix that error… that error is showing up in journal.
Maybe someone has an idea how to fix this error?
Cheers

jasonwryan wrote:And, if you have read this far, you might want to read this:
How To Ask Questions The Smart Way
*sigh*
Perhaps a different approach is needed.
If read this far
read: How To Ask Questions The Smart Way
else
read anyway: How To Ask Questions The Smart Way
fi
EDIT: This link is not to give you the runaround or to ignore your issues. It is a genuine attempt to help you learn to present the problems you are facing in a way that will be most conducive to finding solutions. Your present style of posting is not likely to lead to solutions. If you are offended by my lighthearted pokes, know that offense was not the goal ... but poking was. It would be easy to ignore posts that were not productive - but ignoring them would be equally unproductive (for everyone).
Last edited by Trilby (2013-02-13 13:16:27)

: How to find the system(machine) in the domain (network)

Hi Everybody,
Can some tell me how can i find the machines(system's computer's ip address)that are their in the network.
Iam developing a small program in Java, which i want to know the m/c's that are there in the network (or domain).
well anything even with ntive program that gives me all the ip's or m/c name as return will do.
Thanks in Advance.
Amit

I have not tried this in java, but the theory is the following:
In IP: if you want to receive response from all machines in your network, you would do the following:
(I will take a class C network as example)
Network: 192.168.1.0
Ping 192.168.1.255 (this is the broadcast address).
This way, all machines should respond. I think it is the ICMP protocol you use to do this.
The other solution (not Ethernet, and I think impossible with java) is to make a layer 2 (data link layer) broadcast rather than a IP (layer 3) broadcast. This can be done with a special MAC address code used to broadcast.
However, the first method should work for you, now the big question. How to use ICMP in java?
Regards... Martin

OAS 4081 Failed to find User ( root )

Okay, so I'm attempting to run a listener on port 443 which requires root privileges. When I set the user to root it accepts it just fine but when I start the listener, the log file says: Error: Failed to find the User ( root ) in /etc/password. If I try any other user it tells me they don't have privileges for that port. Any clues hear are appreciated.

Did you recently upgrade your ConfigMgr site to SP1 or R2?
Jason | http://blog.configmgrftw.com

Fails to find HD on boot up every other time

Starting in mid-November, shortly after replacing the battery and upgrading to 10.4.3, my ibook would not find the HD during boot up every other time I went to use it. I tried booting from the installation disc 10.4, resetting, PRAM, PMU, NVRAM, etc. but nothing short of putting the computer away for the rest of the day helped. The next day it boots up normally. If it goes to sleep, it starts the SBBOD and freezes. If I shut it down, it fails to boot up, only displaying the file folder with the alternating Mac face/question mark. The only solution is to just let it sit.
This computer is within the range of serial numbers for the logic board recall, but did not display any symptoms within the three years, and now that is over. I don't understand the regularity with which it intermittently works and fails without anything being done to it.
BTW, I have reinstalled 10.4, repaired permissions, done one update at a time, repairing permissions in between and it worked fine for two days and has again failed to find the HD on boot up. I have the same software on my Power PC (the same age) and have no trouble whatsoever. I'm typing this from that computer.

This is what I get everytime I run repair disk permissions.
Determining correct file permissions.
We are using special permissions for the file or directory ./Library/Widgets/Dictionary.wdgt/Dictionary.js. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Dictionary.wdgt/Dictionary.widgetplugin/Contents/Info.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Dictionary.wdgt/Dictionary.widgetplugin/Contents/MacOS/Dictio nary. New permissions are 33261
We are using special permissions for the file or directory ./Library/Widgets/Dictionary.wdgt/Dictionary.widgetplugin/Contents/version.plis t. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Dictionary.wdgt/Info.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Dictionary.wdgt/version.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Flight Tracker.wdgt/FlightTracker.js. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Flight Tracker.wdgt/FlightTrackerComboBoxPlugin.plugin/Contents/Info.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Flight Tracker.wdgt/FlightTrackerComboBoxPlugin.plugin/Contents/MacOS/FlightTrackerCom boBoxPlugin. New permissions are 33261
We are using special permissions for the file or directory ./Library/Widgets/Flight Tracker.wdgt/FlightTrackerComboBoxPlugin.plugin/Contents/version.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Flight Tracker.wdgt/Info.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Flight Tracker.wdgt/parser.js. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Flight Tracker.wdgt/version.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Stickies.wdgt/Info.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Stickies.wdgt/Stickies.js. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Stickies.wdgt/version.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Unit Converter.wdgt/Info.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Unit Converter.wdgt/UnitConverter.js. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Unit Converter.wdgt/parser.js. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Unit Converter.wdgt/version.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets. New permissions are 16877
We are using a special gid for the file or directory ./System/Library/CoreServices/Dock.app/Contents/MacOS/Dock. New gid is 0
We are using special permissions for the file or directory ./System/Library/CoreServices/Dock.app/Contents/MacOS/Dock. New permissions are 33261
We are using special permissions for the file or directory ./usr/lib/php/build/Makefile.global. New permissions are 33060
We are using special permissions for the file or directory ./usr/lib/php/build/acinclude.m4. New permissions are 33060
We are using special permissions for the file or directory ./usr/lib/php/build/mkdep.awk. New permissions are 33060
We are using special permissions for the file or directory ./usr/lib/php/build/phpize.m4. New permissions are 33060
We are using special permissions for the file or directory ./usr/lib/php/build/scanmakefilein.awk. New permissions are 33060
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Everytime I run this I get the same message. Any reason these won't stay the correct values?

Failed to find platform-set-frequency-high

I see this error in the System console log every time I start my 17" Powerbook 1GHz G4.
*<username> kernel[0]: ASC::checkProperties ERROR: failed to find platform-set-frequency-high*
*<username> kernel[0]: ASC::start ERROR: failed to find the properties*
Startup seems to hang there while it's finding out that it can't set-frequency-high and can't find the properties.
What is this error telling me?
Where are the 'properties' it failed to find?
How does one fix this error?
Any help appreciated.

I guess you're right there I'll move it across.

App Store tells me failed to find service connection url. How do I fix it?

When I go to buy an app from the app store it ask for my password for my apple ID. When I enter it it tells me it has failed to find my service connection URL. If If I try to open my account info it tells me I have entered my password wrong to many times when I'm not. Can anyone tell me why it has failed to find the service connection URL?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

[Dropped] vdautomount fails to find the machine

Similar Messages

Maybe you are looking for