Dropped Xperia Z2 on floor with a distance of 0,2m

Yesterday my Xperia Z2 (bought 2 months ago) fell out of my pocket, dropping it with a distance of 0,2m on a hardwood floor. The mobile instantly turned off, not been able to turn it on since.
I've tried suggested troubleshooting by pushing the power button and volume up button at the same time. This didnt work... tried to charge it over a night and retry the powerbutton - volume button combination again. Didnt work. Tried the last step, resetting the device by pushing the red button beside the SIM card. Didnt work.... im out of ideas... Any ideas?
Probably broken huh??
Solved!
Go to Solution.

its confirmed. The mobile is broken and couldnt be fixed. Considering that I found a new bug in that mobile every week I'm rather happy to get rid of it.

Similar Messages

I bought an iPhone 5 in Brazil, but i dropped it in the floor and now i need to fix it. is it possible to make in New York and how much would cost?

i bought an iPhone 5 in Brazil, but i dropped it in the floor and now i need to fix it. is it possible to make in New York and how much would cost?

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

Can't drag and drop nor copy and past with iMac with OS 10.8.1.

Can't drag and drop nor copy and past with iMac with OS 10.8.1. Not with iTunes, MS Word, nor Pages. No where. Reboot or relogging in helps for about an hour. Hard reset worked for a short time. Per Apple support, most likely will reinstall the operation system. Just wondered if anybody else has run into this. Did a disk scan, and that was fine. And did rebooting, holding down CMD+OPT+R, and P.. Deleted all the start up programs. Checked the internet, no solutions there. So it all appears to be OS redo time.

Do you subscribe to MLB.tv, and if so, did you install the NextDef plug in? If so, read this…
https://discussions.apple.com/message/19185556#19185556
I removed the NextDef plug in over 24 hours ago, restarted and haven't had a single issue with drag and drop or cut and paste since.

Catproc.sql gives ORA-02303: cannot drop or replace a type with type or tab

I am running catproc.sql and am seeing several of the following errors. Appreciate any insight into the problem. Thanks..
CREATE OR REPLACE TYPE ODCIObject AS object
ERROR at line 1:
ORA-02303: cannot drop or replace a type with type or table dependents
CREATE OR REPLACE TYPE ODCIObjectList AS VARRAY(32) of ODCIObject;
ERROR at line 1:
ORA-02303: cannot drop or replace a type with type or table dependents

I am in the process of doing a test upgrade of Oracle E-business 11.0.3 with Oracle 8.0.6 to Oracle E-business 11.5.10.2 with Oracle 9.2.0.
I am following the upgrade manual:
Oracle Applications – Upgrading Oracle Applications
Release 11i (11.5.10.2)
Part No. B19297-01
I have already upgraded the database from 8.0.6 to 9.2.0 using the Oracle database migration utility at the appropriate point in the instructions.
After upgrading the database to 9.2.0 as stated in this manual, one of the of the next Oracle Application pre-upgrade tasks is to execute a script called addb920_nt.sql which in turn executes catalog.sql and catproc.sql. I am seeing these errors when catproc.sql is executed.
I have logged an Oracle Support SR and am awaiting a response, but wanted to know if anyone had seen similar issues.
Thanks,
Alma

ORA-02303: cannot drop or replace a type with type or table dependents

Oracle 10.2.0.3 on solaris :
I am trying to do a
CREATE OR REPLACE TYPE WickType_StringArray AS TABLE OF VARCHAR2(256);
I am getting the error :
ORA-02303: cannot drop or replace a type with type or table dependents
I then looked for the dependencies :
select * from dba_dependencies where name = 'WICKTYPE_STRINGARRAY' and owner='HARPER';
(Columns below with values are delimited by pipe | )
OWNER|NAME|TYPE|REFERENCED_OWNER|REFERENCED_NAME|REFERENCED_TYPE|REFERENCED_LINK_NAME|DEPENDENCY_TYPE
HARPER|WICKTYPE_STRINGARRAY|TYPE|SYS|STANDARD|PACKAGE||HARD
What is the best way for me to proceed to get my CREATE OR REPLACE statement working ?
Thanks

Well you could move to 11g but I'd suggest a less drastic measure for now. Save the data, drop the table, reload the table.
But give serious consideration to Tom Kyte's advice about object tables: Don't use them. Instead use relational tables and object views.

Dropped magic mouse on floor now it wont scroll down or swipe..broken or buy new one

dropped magic mouse on floor now it wont scroll up or down or swipe..broken or buy new one?

Buy a new one. They are not repairable (to my knowledge).
Barry

HT1349 iphone 4S - my wifi keeps dropping or it comes up with a message "unable to connect"

iphone 4S - my wifi keeps dropping or it comes up with a message "unable to connect"

1. Did this just start randomly, or have you ever been able to connect to this network?
2. Does this phone connect to other wifi networks?
3. What is the strenght of the wifi connection when you are close to the router (1-3 bars)?
Try to isolate and see if this is just an issue with just this network. If so, and you have access to the settings on the router, I would test out with no security or a different chanel. http://support.apple.com/kb/HT4199 gives all of the recomended settings for wifi networks so that the phone should work optimally with that network
If you are having this same issue with all wifi networks and have gone through a full restore of the phone to new, then you likely have a hardware issue with your phone and may need to look at repair/replacement to resolve this.

Xperia z3 compact charge with dock dk48 is slow !

I use Ampere application to check amperage when xperia z3 compact charge with dock dk48 (I always charge on 15%)I see :from 15% to 89% so amperage 800mA-900mAfrom 90% to 100% so amperage 150mA-250mAand finally pin full charge 100% need 3 hours 10 minutesIt is slowand my question is : If I use dock dk48 to charge, it really does safe for my z3 compact ?????????

They should be equal, as long as the phone isn't used more when in the dock, which would make the charging slower.

I dropped my iphone on the floor with the otterbox? did something get damage on the inside of my iphone?

is something damage?

An Otterbox is a very good case.
If your iPhone is not damaged in any obvious manner (broken screen for example) then it is fine. Nothing will arise in the future as a result of having dropped it.

I accidentally dropped my iPod from 2nd floor with my laundry 2 years ago

So it doesn't work anymore. (Out of order). Does warranty cover this type of damage?

It happend *2 years* ago... any insurance claim should have gone in 2 years ago too... Two years ago it would still not have been Apple's problem. So the answer is...
NO
tt2

Drop iphone 4 on floor showing black and white lines

drop on floor show black and white line

And what troubleshooting steps have you tried so far?
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Apple tech dropped my G5 onto floor! Advice?

Drove about 70 miles to the nearest Apple Store to pick up my G5 that received a new power supply. The tech wheels my repaired G5 tower out on a little cart, then right before my eyes, it topples over onto the hardwood floor of the Apple Store in Glendale! The access panel and plexiglass shield fell off. At my insistence, they attempted to power it up, heard the chime, then the little circle spinning away and the fans going beserk. The tech shut it down, then said he'd have to do a full diagnostics and would replace the dented case, not charge for the original repair, blah blah. I just want to know, what are the chances I've lost my data/apps? Yes, I've backed up. But what a pain. I am sick! The cart was low to the floor, so it did not drop straight down; rather fell over flat, panel side down. Anyone's tower ever fall over? Also, let's say they check it all out and find it all A-OK. What are the chances that this accident will leave the machine more vulnerable to a problem in the future? Just like with a car being in an accident that gets repaired, but is "never the same again." KWIM?
PowerMac G5 1.8 single, iBook G4 14 Mac OS X (10.4.9)
PowerMac G5 1.8 single, iBook G4 14 Mac OS X (10.3.9)

Hi MacMom4-
This is certainly a case of "truth is stranger than fiction".
Yes, I have dumped over more than one G5 and more than once, although I do not admit it often. The drives can withstand that kind of fall.
If this was an Apple Authorized Service Provider it may be worth contacting Customer Relations at 1-800-767-2775. Be firm yet polite and at a minimum have them open up a case number to track further developments. This is not AppleCare, but the people you can complain to when service blunders thus.
When on the phone to CR make sure to express your fears about further use of the machine. I am a technical-sort and could try and disprove your car theory but IMHO if it bothers you enough to mention it here it is worth mentioning to Apple.
Luck-
-DaddyPaycheck

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

How to use value in a drop-down list box as "With these Values" parameter?

Hello, new user.
I have a drop-down list box on Page 1, upon which the user can choose a study number. The List Box is named "P1_STUDY_NBR".
Then I have a list, one entry of which goes to my master-detail form, which is Page 6. I would like it to go to the study number that the user choose on Page 1.
In my target on the create/edit list entry, I put in "Page in this Application", "Page 6", then in Set these items, I put in
P6_STUDY_NBR
My question is what to use in With these values, where I want the contents of the P1_STUDY_NBR. I tried:
&P1_STUDY_NBR
and that does not work. If I put in one of the study numbers, like 336-00, then it does work, but I want it to pass the study number the user chooses in the list box. How do I refer to the contents of P1_STUDY_NBR?
-Mary

Yes, that does work, thanks. I'm now getting the default value I was putting in yesterday rather than an error message, so there must be something loading it, but I'll hunt around for what process might be doing that, or try re-creating the master-detail form again.

Drop Down list in table with data from database table

Hi,
I have created an interactive form in WD ABAP.
In Context tab I have created the nodes as follows:
ZSOHEADER node with cardinality 1..1
|-> MATERIAL node with cardinality 0..n. Under MATERIAL node there are 2 attrib. MAKTX and MATNR.
I am fetching data from MARA table into an internal table IT_MARA.
The node MATERIAL is bound to internal table IT_MARA.
I have created a table with property ' Body rows vary depending on data ' .
I have only one row in table. The first cell of the row is a drop down field.
I have bind the field to the node MATERIAL->DATA->MAKTX.
Now the issue is even though I have created only one row in my table, in preview it is creating as many rows in the table as the no.of records in the internal table.
I want only one row with the drop down list containing all values of the internal table.
Kindly suggest what to do.
Regards,
Vinod

Hi,
In the WebDynpro Context, in the main node create another node like A1 with cardinality 0..n and in this node create attributes TEXT and VALUE.
Now goto method and in that method using code wizard read the node A1.
And use the below code snippet sample in your program, i.e. code this under respective method of the webdynpro.
*Declare the TYPES
TYPES : BEGIN OF TY_TABLE,
TEXT TYPE SOMETYPE,
VALUE TYPE SOMETYPE,
END OF TY_UOM.
*Define Internal Table and work area.
DATA : IT_TABLE TYPE STANDARD TABLE OF TY_TABLE INITIAL SIZE 0,
WA_TABLE TYPE TY_TABLE.
SELECT TEXT VALUE FROM TABLENAME INTO TABLE IT_TABLE.
lr_node_info->bind_table( IT_TABLE ).
And in the Adobe Form Layout
Go to Menu of the Adobe LiveCycle Designer:
Tools>Options..>DataBinding
In that window you just check the Show Dynamic properties Check Box.
Now for the Drop Down go the binding tab in object palette and click on the list items and there specify the Internal Table and specify the text as the internal table text field and value as internal table value field.
OR
From the WebDynpro Native Library Palette use the Value Help Drop Down and in object pallette goto binding tab and provide the form interface binding. Before this in the WebDynpro goto Context and for the particular field under the properties provide the search help as dictionary search help and specify the name of the dictionary search help.
OR
We have another method of setting the Text and Value to the DDL directly in the WebDynpro by coding in the methods, I dont have much knowledge on this.
Regards
Pradeep Goli

Dropped Xperia Z2 on floor with a distance of 0,2m

Similar Messages

Maybe you are looking for