Dropping an audio track onto a PSD file imported into Final Cut Express

I created a credits page for my video in Photoshop and then imported it into Final Cut Express (Version 1.0). I then duplicated part of an audio track from another sequence (My friend's father playing the organ), and dropped it onto the Photoshop credits sequence. It displayed and played nicely in Final Cut Express, but did not create an audio track which was visible within Final Cut Express. When I exported the sequence as a .mov file and then imported that into iDVD, it also displayed and played correctly in iDVD. But when I burned the DVD, there was no longer any audio with the credits. Any suggestions?
iMac Mac OS X (10.4.5)

Thanks so much for your response. I selected and copied tracks A1 and A2 from one sequence and then pasted them into the credits (Photoshop) sequence. No audio tracks appeared in the Photoshop sequence, but we could hear the audio when we played the Photoshop sequence.
There was video associated with the original organ track, and we did not lock off the video when we dropped it into the Timeline, although there didn't seem to be any problem with the video. We did not Mixdown the audio either, although no audio tracks were displayed in the Photoshop sequence. I will try both of those things and see if it makes a difference. Thanks again.
iMac Mac OS X (10.4.5)

Similar Messages

MXF file conversion for import into Final Cut Express 4

Does anyone know of a good software product to convert mxf files to quicktime for import into Final Cut Express 4? Not having much luck finding one. Thanks

alski999 wrote:
Does anyone know of a good software product to convert mxf files to quicktime for import into Final Cut Express 4?
the makers of famous flip4mac (=wmv plug-in for QT), offer a mxf-modul too
http://www.telestream.net/telestream-products/desktop-products.htm
they offer a trial - test before buy.
mxf is a professional format, so professional price ...

MPEG 1 to MPEG 4 then file import to final cut express ?? Not happening

Hello, I am complete newbie ! I have mpeg 1 files I am trying to edit. Final Cut won't allow me to import.
Used Handbrake to convert MPEG 1 to MPEG 4 , still would not allow me to import.
What to do ?
-Tony

Use MPEG Streamclip to convert your MPEG1 videos to either QuickTime/DV-NTSC or +QuickTime/Apple Intermediate Codec.+
Also make sure you select the matching *Easy Setup* in FCE before you create the sequence you want to edit these videos in. This is so the sequence settings match your clip properties when you import the converted files.
Handbrake is not the right app for this purpose.
Also, I highly recommend that you get a copy of Tom Wolsky's excellent book Final Cut Express Editing Workshop and watch the tutorials on Izzy Video

Max AVI file size into Final Cut Express?

I am a complete newcomer to mac and FC - About to begin loading all my old video onto disk. If I stream 90 min of Hi8 into one AVI file it will be easiest but will the file be too large for FC Exp - is there a file size limit or not - I am assuming not.

Sorry, simply my old Adobe Premier/Windows background - simply wanted to know whether there was any file size limit in FC however I have just captured and imported a complete tape so clearly not.

Can't move a soundtrack file into Final Cut Express

I most likely doing something wrong. Who can give me directions for importing a Soundtrack file into Final Cut Express.

What I do Les is go to Share in Sound Track then ...Share to iTunes. Then I go to iTunes and drag it to the desk top then import via FC. There maybe is an easier way but I don't know it.

Importing Files into Final Cut Express

I have a technical issue that I hope someone can assist me with...
I recieved 2 harddrives full of video clips that were shot in HD from a video production house. Here is the content on the drives: CARD 1 (folder), inside this folder there are 2 items (CONTENTS & LASTCLIP.txt) in the CONTENT folder are the following folders : AUDIO, CLIP, ICON, PROXY, VIDEO, and VOICE.
My question/dilemma: Can I import these clips into Final Cut Express to edit? I have an older version of Final Cut HD that won't work with these files.
Any and all input will be greatly appreciated.
-Greg

HELP ! Anybody, please help !
As you can probably guess. I've reached the limit of my "expertise" with your files ....... ".XML" sounds familiar but you will have to hang around for someone else to tell you whether and how they can be used.
One thing I am sure about (I think!) is that the latest version of FCE will be no better than the older one you have.

MP4 (MPEG-4 MOVIE) FILE IMPORT TO FINAL CUT PRO X

I have some MP4 files I am unable to import into Final Cut Pro X from a Hard Drive. 1920x1080, Codecs: MPEG-4 Video, Linear PCM, Audio Channels: 2 Total Bit Rate: 35,253 ...
Any suggestions as to what steps I need to take to be able to import them into Final Cut Pro X ???

Okay, I fugured it out ... the footage I was provided was from a Sony XDCAM source ... the link below gave the information needed ...
Final Cut Pro X: Importing Sony XDCAM media http://support.apple.com/kb/HT4724
Just follow the instructions ... the sony documentation for the two downloads indicated that this would not work for FCP X ... but it did work fine ...

Importing video files into final cut express

I am a pro tools engineer and have just dove into final cut express 4.0 to do some simple video editing.I have a cannon camera with a sd card.I archived the video to a hard drive so I could free up the card.I can not find a single piece of evidence that explains how I can import those files from my hard drive.Everything that is mentioned is comming from a camera.I also tried by the book importing a Imovie to start simple.No luck.It shows up in the directory but there is no video.Needless to say I am lost!!!!

If you still have the original video on the memory card, put it back in the camcorder. (Don't try to copy it back from your Mac to the card, however.) Connect the camcorder to your Mac via USB and try capturing the video via FCE's Log & Transfer function.
In most cases when people merely copy video files from a camcorder's memory stick or hard drive (usually AVCHD video) to the Mac desktop or a folder, they don't copy the full directory structure on the card, which is essential. Is that what you did when you 'archived' the video? Can you provide more specific info?

I have a .mov file that is 59 gigs. Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

I have a .mov file that is 59 gigs. Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

Open the file in QuickTime Player. Then do Tools > Show Movie Inspector. What does it say for Format and FPS?
At 59GB, I suspect you have either a 4 hour DV video or a 1+ hour video that was converted to Apple Intermediate Codec. If it's either of those, you can import it directly into FCE provided you select the appropriate Easy Setup first. Your clips have to match the properties of the Easy Setup you are using.
If it's neither DV or AIC then you need to convert it to one of those codecs. (QuickTime/DV or QuickTime/AIC) Many people in this forum rely on MPEG Streamclip (it's free and works great).

File Compatibility between Final Cut Express and iMovie '09

I am in the process of converting some old VHS tapes to DVD so I can import and edit them in Final Cut Express or iMovie '09 (I'm upgrading from iMovie '08). I would like to transfer them to a file format that I can use in either application.
Are the file formats the same in both applications or is there one in particular that I should use? I know that it is possible to open a video move created in iMovie '09 in Final Cut Express, but there some situations where I want to go in the other direction. i.e. Import the raw file that was created to be imported by Final Cut Express by iMovie '09 instead.
Bob

It would be better if you did not get them transfered to DVD. This is a highly compressed format. If you can get the material transfered directly to QuickTime using the DV NTSC codec you would be better off.
The file formats in iMovie and FCE are not the same. iMovie uses DV Stream. FCE uses QuickTime.

Audio popping between clips with timeline imported from final cut xml file

So i imported a final cut timeline that was synced with pluraleyes into adobe and between all the cuts there is an audible popping noise. I've tried using audio cross fade but it seems to make it worse. How can I fix this??

If anyone else has this problem - you fix it by making sure you pan the audio to the center, not left or right.

"Unable to open project file" message in final cut express 3.5.1

I have (well had now) a project with 3 video clips and multiple .psd files as stills. When the project contains just the 3 video clips and a couple of transitions I can save the project and quit Final Cut Express and relaunch FCE and when I try to re-open the same project, it opens just fine, without any problems and just the way I expected it to be. After editing the same project for a couple of hours and saving along the way (this has happened twice now and I don't think the length of time of editing matters) and adding multiple still images to the 3 video clips (this part is new in my working with FCE); I save and quit. When I return to open the same project I get the message "Unable to open project file" and click the OK button, which is my only option and I am given a new blank project. So where did my work go???

Thank you for the response, but it hasn't worked yet...
I read the link. I am working off my internal drive.
I re-named the Capture Scratch folder, and any Render folders and then launched FCE. I was presented with a window that reads "To preserve the integrity of the data used by Final Cut Express HD, it is necessary to ensure the existance of the following path(s)" The path in the box below is where my project file and support files are. My 3 options are Quit, Check again and Reset Scratch disk. I choose the Reset Scratch Disk button and it took me to the Scratch Disk window and I Set/Created a new folder and clicked Choose and then OK back at the Scratch Disk window and Continue at the initial window... the Reset Scratch disk button is now labeled Continue. I am given a new Untitled Project work space. I tried to open my project file and once again with the message "Unable to open project file".
Where did I go wrong???

Motion files no longer able to import into Final Cut

Hello all,
Everytime I try to import a motion file into Final Cut I get an unrecogized file error. This just started but I also noticed that Motion has limited export options as well.
I am wondering if anyone else is experiencing this problem.

Hi there. Has anyone got to the bottom of this file error problem yet? I'm having the exact same problem as the one in this post, ...and have an urgent deadline to meet!!
Once again, trying to import Motion 2.0.1 files into FCP 5.0.4 but get error message: "File Error: 1 file recognized, 0 access denied, 1 unknown"
ANY HELP MUCH APPRECIATED - THANKS!!
R
I am using Final Cut 5.0.4 with motion 2.0.1
I did install some of the recent updates to Tiger to
get it up to 10.4.9 But that is about it.
I can't drag into the browser I can't do a file
import.
My other files that I had previously import maybe a
month ago all work fine inside final cut but any new
files give me the. I still need to conduct further
testing.
I will report my findings.

Saving files and copying data into final cut express

I have read that you can create duplicate copies of your I movie project and work between them so ou can make changes but always have a master file.
but I have not been able to figure out how to do that. And after I am finishend with my project I can export it to final cut express for some additional editing and video layering is that true? can I do the sme with final cut pro or just final cut express? Also is there any quality loss in this method? Thanks in advance

Hi tnt,
you write on a piece of paper; you copy that paper; you continue to write on the first one... how does the copy "know", what you've written..???
sorry, who gave you that advice of copying projects? backup frequently, yepp, that makes sense with ANY data on a computer... but with a backup you allways go back in time.....
FCE is able to open iMovie project directly (don't know about FCP, don't own, $$$); BUT then the file structure is broken, you can NOT re-import project to iM, BUT the movie...
you know the difference? a movie is one single block, a project makes it possible to edit transitions, to edit titles etc...
for sure, you can export and import from and to iM and FCE/P without loss of quality as long as you stay with "dv stream" (native file format of both/all three apps). I'm, doing this a lot, using iM for editing and FCE "just" for "special effects", advanced titles etc.-
hope I could be helpful

Final cut pro 7 files autosaving as final cut express files

Greetings!
Running a Macbook Pro with Final Cut 7 on it.... our office had it pre loaded with FCE 4 until we got final cut loaded on it. Never used FCE... I happened to be looking for an autosaved version of a final cut pro project I was working on and noticed that all the autosaved files for that FCP project and all of my other FCP projects had been autosaved as Final Cut Express files. It required the registration of FCE 4 in order to open them. I was able to grab one, dupe it and open it in FCP... but what caused that?

When you have both apps installed you sometimes get a crossover of files/icons but I have never had any problems opening any of the files.
If you don't need FCE again you could delete it using http://www.digitalrebellion.com/fcs_remover.htm
Make sure you deselect FCP and all the FCS apps and media otherwise you will have to reinstall them again!
Incidentally, registering FCE will have absolutely no effect on whether or not you can open them or did you mean you updated FCE.
Message was edited by: Ian R. Brown

Dropping an audio track onto a PSD file imported into Final Cut Express

Similar Messages

Maybe you are looking for