Dropping Audio

How can I get the audio to play?
When I open a multitrack project Im working on I am getting this error message:
"Soundtrack Pro is dropping audio because your computer's hard disk cannot deliver all the audio in time. Try removing some long files or quitting other applications"
The audio is also not playing and I have no other programs open and plenty of hard disk space.
How can i get the audio to play?

Audio recording is governed by Preferences->Recording->Recordings Location
If you're importing audio it could be from anywhere.
You could always Save As of the project to your media drive to make sure. In the Save dialog first make a new folder (for organizational clarity), check Collect Media, then Save. You'll end up with your New Folder containing a MEdia files folder and the project folder.
HTH

Similar Messages

  • Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

    Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

    Nevermind. I figured it out.

  • 2.0.1 dropped audio with Alpine iDA-X200 car stereo

    So after about 20 minutes of playback, the iPhone will 'drop audio' for a brief moment .. enough to be annoying. When the iPhone was running 1.1.4 of the OS, I never had the dropped audio problem. But ever since I 'upgraded' to 2.0(and 2.0.1), the dropped audio will occur with the iDA-X200. Any solutions? I've tried Airplane Mode and same problem

    Hmmm interesting, I have the x100 and an original iPhone running at 2.0.1. I've noticed a few times that the music 'dropped out' but once I had the audio go totally bonkers, spitting out digital hash mixed with snippets of the song. Since I was driving at the time all I could do was to jiggle the connector and that seemed to work. It hasn't happened since.
    I wish I was of more help, but maybe by bumping this topic up a little someone else will chime in...

  • CS6 keeps dropping audio on my Mac

    Using a Canon AVCHD camera, every single clip I ingest results in dropped audio. It doesn't matter if I close the program and reopen it, it is always gone. Is there any fix for this?
    Thanks.

    The message says that CS6 is not supported on this type of Mac.
    Is this Hardware overview enough information?
    Hardware Overview:
      Model Name:          iMac
      Model Identifier:          iMac4,1
      Processor Name:          Intel Core Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          2 MB
      Memory:          2 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          IM41.0055.B08
      SMC Version (system):          1.1f5
      Serial Number (system):          QP60802EU2S
      Hardware UUID:          00000000-0000-1000-8000-0016CB8B72E7

  • Premiere Pro dropped audio after export, AME no audio

    Similar problem in both premiere & AME - clips are exporting with video but no audio.
    When queueing up jobs in AME, they'll finish with no Audio & now even exporting directly from the timeline in Premiere Pro CC 2014.2 (just updated 2014-12-14) our clips still have no audio.
    All clips have conformed on the timeline before beginning export.
    This is happening despite trying these various solutions... re-installing Premiere, starting a new project, choosing a new Scratch Disk with 3 TB of available hard drive space... also our operating system is a 2014 3.5 GHz i7 32GB RAM iMac, running Mavericks with a 256 GB Flash Hard Drive, so RAM or HD speed should not be an issue?
    Any advice or a solution would be greatly appreciated.  We export dozens of jobs a day and cannot find a reason why this Adobe Premiere Pro & AME Software is not working correctly & giving us dropped audio upon export - very frustrating, thanks for the help...

    I have 2 macs, screenshot with identical export setting was from 2nd mac. if you can repro now here is a 2014.2 screenshot & same export settings on the 2014.2 mac; issue occurs on both computers thanks - also this timeline, before export I had audio on all tracks.  Here is a screenshot of the timeline post export; all of the audio is gone?  It was there at time of export

  • Disk limit dropping audio...

    Hi,
    I have a old project that worked 100% fine in old Soundtrack version.
    Now i try to play the project in Soundtrack Pro and i get this message !!!
    "Soundtrack Pro is dropping audio because your computer's hard disk cannot deliver all of the ausio in time. Try removing some long files or quitting other applications."
    I have very basic sound effets over a normal video.
    thanks

    I've had the exact same problem. I never had problems with Soundtrack 1.5 that came with FCE. I could easily get 8 tracks going on my old iMac G5 w/ 1GB RAM. But when I upgraded to Final Cut Studio 2 and an iMac C2D 2.33GHz w/ 2GB RAM, I couldn't get more than 2 audio tracks to play without that alert. Sometimes, it wouldn't even play one track.
    I was scoring a film, so I had exported video from FCP. I reduced the quality of the export to a small 320x240 MPEG4 file, but that made no difference. On my old iMac, I could use a full-res HDV video with no problem.
    On a hunch, I disconnected my 2nd monitor, which I recently added. After that, I've haven't had a single problem. I've got 5 tracks going on my current project. Haven't seen the alert again.
    Makes no sense, but I did notice a performance drop in my iMac when using that 2nd monitor. I have a NVIDIA 7600GT w/ 256MB VRAM, so I thought it should handle it. Guess not.Oh well, I can live without it. The 24" screen is plenty big!
    Mac OS X (10.4.9) 24" iMac Core 2 Duo 2.33GHz, 2GB RAM

  • Problem with dropping audio and disk limit

    Hi,
    I have problem with working of Soundtrack Pro. When i trying to work and show message:
    DISK LIMIT
    Soundtrack Pro is dropping audio because your computer's hard disk can't deliver all the audio in time. Try removing some long files or quitting other applications.
    The problem is that i have 200 GB free space and in one time use only soundtrack for working.
    Please help!!!!

    Thank you fro your answer, but i try to make a short audio 30 sec. spot. The media for this spot is not very big. The transfer of system disk is 50 mb/s do you think if we put another disk will help?

  • Airplay dropping audio to apple TV and other airplay devices.

    I have an Apple TV that will drop audio when streaming from the ipad2, laptop, iphone 4s, and iphone 5. I also have an airplay Yamah receiver that will do the same thing. I have replaced the wifi router that did not make a difference..Do you have a way to resolve this.

    Thanks for replying and trying to help Lanny. 
    When I try to select Apple TV it would simply bounce back to the internal speakers (or the last device I had selected). 
    Since posting I found a solution on another thread.  The post from DC Soup on this thread on flushing the DNS cache.  Everything works fine after that.  I don't know why flushing the DNS cache would fix the issue.
    It's great because I can now get audio from any app to stream to my Apple TV.

  • Dropping Audio Files

    STP Forum,
    I read that even if you drop frames in FCP that the frames return during exporting to DVD or other mediums. Does the same apply to dropped audio in STP? Will the information be there when it comes time to export?
    Well, I just dropped my first little bit of audio in STP. I wasn't really doing anything major. I had FCP open while I was working on a 24p HDV sequence in STP - just playin' around with some STP music files. Nothing big you know.
    Thanks for looking this way,
    Trey

    joip wrote:
    I can't believe no one has every tried this.
    I do this frequently, and it always works.
    I'm assuming the audio you are dragging in from the audio bin was indeed, recorded, bounced, or exported from within the same song...?
    Just realized, perhaps you're actually trying to "paste". The command Samplecontruct mentioned is actually labeled "Move region to original record position", and is found under the mini Audio menu of the Arrange page.
    maybe that's where the problem lies...?

  • STP drop audio

    Soundtrack Pro is dopping audio because my computer's hard disk cannot deliver all of the audio in time. I removed some long files and quitted other applications, but the problem persists. What would be the best solution to avoid dropping audio altogether? Thank you. golab.

    I have 2 external devices, one allocated to video (500Gig left) and the other to backup ( 120Gig). And of course the internal one with only 70Gig left. So if I have to buy one for Audio only what is the best available because I do want keep track of the audio files.
    Any reputable 10,000rpm Firewire drive should do.
    I have a speaker (audio technica AT897 line+gradient condenser Microphone) . I don't know if it can be directly connected to my MacBook Pro or I need an audio interface, and if so which one would be the best one. And finally i wonder if can connect XLR-P (from ProSignVieo), which I used with my camcorder overseas, to my computer to get best sound, and if so how. Thank you so much. golab
    You'd definitely need something with a mic pre-amp. I really don't know this market at all, but [M-Audio|http://www.m-audio.com/index.php?do=products.family&ID=recording] has a complete selection of interfaces, both Firewire and USB. You might post a thread about interface recommendations in the Logic forums to get some opinions.

  • Bluetooth drops audio since update to iOS 6

    Since i've updated my iPad to iOS 6.0 my Bluetooth connection to my audio system drops audio everything 30 seconds. I didn't have this problem with the previous iOS version.

    Pairing an iPhone with your Mac is NOT supported.
    Pairing an iPhone with another iPhone is NOT supported.
    When you'd like to try pairing it with something that is supported, let us know what happens.
    I already provided you with a link to the supported bluetooth profiles for the iPhone.

  • Drops audio attachments for mms

    Hi,
    I've got an 8330 and here's the problem
    I can send pictures and ringtones to alltel users (*whose network I use) fine, but verizon, I can only send pictures via mms. If I try to send a ringtone, it drops the attachment. Any suggestions? I've tried wiping, even downloading JL_CMDER and wiping but it still won't send audio. Driving me nuts!

    Hi
    use the 'Punch on the Fly' function:
    Options:Audio, or click-hold on the Record button in the Transport.
    HTH
    CCT

  • AVI files corrupted(blocking pic & dropped audio). Any fix available?

    I just transfered a lot of AVI files to my external to save some space. They were all perfect before. Now, if I play them from the external HDD or on my internal HDD, they are all corrupt. Every one of them. The picture is all blocky and the audio keeps dropping. I have transfered them to a Windows machine, and they are still corrupt. BTW, I am using the most recent VLC.
    Is there any way to restore these files? How do I avoid this in the future? I really don't understand how they became corrupt.

    Turns out, the FW800 firmware in my enclosure needed to be updated. Fixed!

  • IWeb Podcast - Drag and Drop Audio and Picture Files

    I have been using iWeb the last few days to create a web site that includes some podcasts. I currently have three podcasts as a part of the site. I have been able to get two of the podcasts to work correctly but the third one, no matter how many times I recreate it seems to be where the difficulty lies.
    The podcast page gives me the opportunity to drag and drop an audio file and a picture file onto the page. As best I can tell, when I drop the audio file onto the page, things seem to be fine. When I drop the picture file onto the object, the audio clip seems to disappear. I have tried dropping the picture file first with basically the same results.
    A couple of more things. I created the original podcast file in GB3. I have found I can't import the podcasting file directly form GB because I end up with a very large file (>60GB) for the audio portion. So, I share the audio file to disk as an M4a file. When I add the audio to the podcast page in iWeb, I drag the audio file from Finder onto the object. The picture I have dropped onto the podcast page both from the Media Browser and from Finder. The results are the same.
    Any help is appreciated.
    Dave

    I think you're asking the question in the wrong forum. From what you posted, there's nothing wrong with GB, you should post in the iWeb forum where you're more likely to get useful and accurate answers about, well, iWeb.

  • Drag & drop audio clip from timeline to project window ?

    i no longer can drag a clip from timeline to the project window & then breakout the clip to mono by selecting clip - audio options- breakout to mono - now when i drop an audio clip from timeline into the project window it does not show up anywhere in the project window - did an update get rid of this function ? it was much better than having to go back to the unedited original source & start from scratch ...

    thanx for your time Jim - i understand that would be the preferred method but that was a quick fix until recently i have noticed that i can no longer do it by just grabbing the edited clip & drop it in project window so that i can modify just that portion of the original files properties - it still functions that way on a friends machine - was just kinda weird that i can't get it to work that way any more …

Maybe you are looking for

  • Itunes Match is activated on my computer but it is not active on AppleTV (2nd generation).

    On apple tv(2nd gen) the "Music" icon or Itunes Match asks me to turn on imatch on my computer. Ive subscribed to itunes match, its turned on on my Mac desktop. itsbeen on for weeks yet no acknowledgement from appletv. i have the new update for ATV.

  • Nokia 5800 restarts when opening themes

    Hi, I have been experiencing a problem with my nokia 5800 ,, everytime i go to the themes panel from settings the phone restarts , what could be the problem ? please help ... Thanks

  • FBL3N- Abap error for new company code

    Hello Forum, I have created a new company code and created few GL accounts in My Test system. However when i try to run this report FBL3n it gives a runtime error. Runtime Errors         CALL_FUNCTION_NOT_FOUND Except.                CX_SY_DYN_CALL_I

  • Importing images for a 480 project

    I want to do some minor pans and zooms to some still photos. The photos will be brought into a timeline consisting of fotage shot at 60i SD. 1. What file type is best to bring in from Photoshop? 2. What physical dimension are best used for still imag

  • Doubt about implementation of the CRM 3.0

    Hi All, I don't know if I put my doubt in the correct place, but let's go. In the factory that I work have been used the CRM 3.0,  but I want to change machine of the CRM, in the SAP DVD BOX have many cd's and I never implemetation CRM only SAP R/3,