Dropping clips into Theme but always using the first clip

Hi, I'm using themes for the first time on my first movie. I am dropping the clips I want into the Reflections - White Open sequence. I initially selected the first, third and fourth clips from my movie to be displayed in the Open element. I later decided to change the first drop be a different clip. After I pulled the clip out, and put another in and the caption changed but the video clip remained as the first video. Is this how it is?

There's a bug in iMovie 6 where video placed in a drop zone is rendered from the start of its Media FILE, not from the start of the CLIP. So if you split a clip in half and drag the second half into the drop zone, iMovie uses the first half.
The solution is to export the second clip to a Full Quality movie and drag that movie into the drop zone. After the theme renders you can discard the Full Quality movie.
(To export just one clip, check the "Share selected clip only" checkbox in the Export window.)
Karl

Similar Messages

My CDs load into itunes but only play the first few second of each song.

When I try to play CDs from itunes only the first few seconds play. I can play CDs from windows media player. At one time I was able to play CDs from itunes.

This might be better answered over in the Importing & Burning in iTunes for Windows forums.
http://discussions.apple.com/thread.jspa?messageID=1430761&#1430761
Run the iTunes Help menu > Run CD Diagnostics... command and post the results there.

If my iPhone 3GS turns on but cannot use the touch screen, could the Processor be the problem?

I recently dropped my iPhone 3GS but cannot use the touch screen. I took to a local repair shop and they tried replacing the digitizer and some other items but still could not get it to work. They advised that the Processor could be the problem. Is this true? If so, can the processor be replaced without losing data? Additionally, my phone has a lock code and when I try to connect it to my desktop to back up, it states that I need to enter my 4 digit pin first, which of course I cannot. Any workarounds here or am I SOL?

Hook the phone to a computer running iTunes and backup to the computer. Copy pictures off the phone manually to the computer.

I can import my first clip to the video library, but not the second clip. I tried dragging-dropping and using the "E" key, but only the first clip will show up in the library. I use IMovie 9.0.9 and OSX 10.8.5. with no problems until yesterday.

I can drag my first clip from the New Event window into the Project Library, but not the second. I can highlight the second clip in the New Event window, but it won't "drag". The "E" key works for the first clip, but not the second.I've been using IMovie daily and the problem just appeared. No upgrades to the computer and no new software installed. IMovie 9.0.9 and OSX 10.8.5

Thanks victoryhat. I learned some new things from this very clear tutorial. But it didn't answer my question about why the titles don't stay with the video when I export it.
He did mention something that might be a clue however. When he talked about importing a title he created as an image, he noted that he was careful to make the image the same size as the video he was adding it to: 1280 x 720. Since I took the video with an iPhone in the vertical position, my video image isn't the same size and orientation as the titles.
Maybe there is a way I should be setting the screen for this size??? I'll go back and play around. Meanwhile thanks for alerting me to Gary Rosenzweig's MacMost tutorials. Very clear. I'll look for more.

Adding pictures to a theme, but not in the drop zones...

I don't know if this is a really noob ou really tricky question, but here it goes : )
I'd like to add a/some picture(s) to a iDVD theme, but not in the drop zones. I'd like my pictures to appear as layers, choose whoch one goes in front, and so on...
Is there any way to do that?
Thx, and happy new year ; )
iMac 24' 2,16GHz CodeDuo2 GeForce 7300 GT 1Gh DDR Mac OS X (10.4.8)

In that case you would need to prepare the background as a QT movie exactly the way you want to display it as a background movie and then drag and drop that prepared QT file to iDVD.
I've never done this type of movie in iLife apps alone but I have with FCP & DVD SP which offers these additional video editing options for sizing pip and frames in an existing movie / menu.
Also check the help Menu for iDVD6 (and iMovie) if you haven't already. I did a search for you and here's what I came up with:
Changing the background image of a DVD menu
You can replace the background image in a menu with your own image. Images in menu backgrounds are cropped to fit the standard DVD window size, but the aspect ratio of the original image is preserved. If you want your image to fit the DVD window exactly, first use an image-editing application to resize the image to 640 x 480 for standard video and 854 x 480 for widescreen.
When you replace a background image, you can also choose to keep the drop zones or remove them completely.
Here are ways to change the background image:
Drag a picture file from the Finder or the Media pane to a DVD menu background, outside a drop zone. Before you drop the picture, press the Command key and choose "Replace background" or "Replace background and drop zones" from the contextual menu that appears (shown above). Then release the mouse button.
Click the Menu button and drag a picture file from the Finder to the background well in the Menu pane. If your theme has drop zones, the drop zones disappear.
Click the Media button, then click Photos. Drag a photo from your iPhoto library or another folder to your DVD menu. If your theme has drop zones, the drop zones are retained.
Choose File > Import > Image, locate and select an image, and click Import. If your theme has drop zones, the drop zones are retained.
To remove a background image and return to the default image for the theme, click the Menu button and drag the image out of the background well (shown above).
Hope this answers your question/s.
SDMacuser

I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played.

I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played. I tried again with some different clips and some worked and some didn't. This hasn't happened before. What should I do? (I am using iMovie '09)

No guarantess but try smc and pram resets,

How can I buy a song but always asked the security questions and you don't remember them what should I do

How can I buy a song but always asked the security questions and you don't remember them what should I do

Write down your security questions.......
Here is what you should do if you do not remember the answers to your Apple ID security questions:
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email addresssign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID passwordcontact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
Cheers,
Alec

I have a iphone4 and a ipad2 and i use 2 laptops to sync them individually, but i used the same apple account. Now I have lost one laptop.

Hey everyone.
I have an iphone4 and an ipad2. I used to sync my phone with one computer and the ipad with another. but i used the same apple account.
Now the problem is that i lost the computer to which i was syncing the iphone. Is there a way that i can start to sync the iphone with the computer that i use for my ipad and not loose any data.
Please help!

infinitya wrote:
Is there a way that i can start to sync the iphone with the computer that i use for my ipad and not loose any data.
No. Syncing with a different computer/library will wipe the content from the device and replace it with content from the new library.
All of the media should be in the iTunes library already, at least what was purchased from iTunes.

I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?

I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

Always use the default account when composing new messages box missing in Outlook 2010 after updating the product key.

I have 2 accounts in outlook 2010. 1 is for me and the other I have delegate access to. When I am in the delegates email and want to reply it automatically uses the account the email is in. So if I am in my email, the from is me but if I am in the delegates
email and hit reply the from is them. Now this is not working and I can't figure out how to get it to work. The only thing that changes is that office asked me to activate recently, which is weird since I have had this same computer with the same version of
office for almost a year now. I did a ton of searching and came across an option on the internet: "Always use the deafult account when composing new messages" but this option is not there on my computer. I checked another computer I have with Office
2010 also and the option is available so it must be something to do with the office activation because I haven't done it on this computer yet. PLEASE HELP!!!

Seems this is a hot issue recently, I've post a reply to another thread with the similar topic, please reference that:
http://social.technet.microsoft.com/Forums/en-US/57289ddd-0dd5-4938-92f7-ee420d8b0d7c/outlook-2010-does-not-reply-to-emails-using-the-same-address-that-received-it?forum=officeitproprevious
Thanks for your updating.
Tony Chen
TechNet Community Support

Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin

Hi ,
We have a catalog that defines 2 types of products (they have too many different properties), so wanted to keep them on two different MDEX engines and serve the applications requests. Here DB catalog and front end ATG application is same for both the MDEX instances.
Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin?
Thanks
Dev

Hi, also have had some problem some monthes ago - I created separete component ProductCatalogSimpleIndexingAdminSecond. After that one of my colleage gave me some advice:
The creating separate component like ProductCatalogSimpleIndexingAdmin for the second IOC is possible way for resolving your situation. But I afraid that this way will be required creating mane duplicates for already existed components.
In my opinion the better way is the following:
starting from AssemblerApplicationConfiguration and ApplicationConfiguration component. It contains details for connecting between ATG and Endeca. Of course you should configure different components for different Endeca Apps.
After that:
Find all components that uses AssemblerApplicationConfiguration and ApplicationConfiguration. Customize these components for using one or another *Configuration component depending on what index works. (many variants released it: the most simple global custom component with flag.)
Then customize the existed ProductCatalogSimpleIndexingAdmin. Using one or another IOC and setting the flag in global custom component when index started. You can add some methods into your custom ProductCatalogSimpleIndexingAdmin like:
Execute baseline index for both IOC (one by one)
Execute baseline for IOC 1
Execute baseline for IOC 2.
Note: you should be afraid about incremental (partial) index in this configuration. But resolving conflicts in incremental index should be done after full implementation these changes.
Regards

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

My Photosmart C309g printer ALWAYS uses the photo black cartridge

I have a photosmart Premium C309g, wireless network connected to an iMac running OS 10.7.2. I use the printer only occasionally to print photos - I have a smaller HP printer for photos. However the C309g always uses the Photo Black cartridge for print jobs. The printer will not operate without a cartridge fitted. But Photo Black is more expensive! How do I make the printer use the ordinary black cartridge for text jobs?

Hello,
Thanks for the post, great question. I've attached a link below that may assist with this, it refers to MAC OS X 10.5/10.6 but the idea remains the same. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662356&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Dropping clips into Theme but always using the first clip

Similar Messages

Maybe you are looking for