Dropping in volume when exporting

Whenever I export a song to iTunes from grargeband, the volume drops SIGNIFICANTLY. It drops from where I was it in garageband to almost inaudible unless I turn my speakers way up.
Is anyone else having this problem? If so what did you do to fix it?
Thanks

Turn off the auto-normalization in the preferences!

Similar Messages

Unable to create volume - error message when exporting

Hello - relatively new Mac and iphoto user here.
I'm trying to export photos from iphoto to a 2 GB thumb drive. I keep getting the error message "unable to create volume" when I try to move anything but very small batches of photos over. What's going on? I tried to create a folder on my desktop for the photos but then when I try to move from there I get an error message telling me the photo "is in use" and can't be moved to the thumb drive.
I would move them to my external hard drive but I'm having trouble with it too. It won't even show up. When I run a disk utility on it it says it can't be verified. Sigh. So that's a whole other issue that will probably take something like Disk Warrior to clean up.
In the meantime, I'm trying to move images to the thumb drive then I'm putting the thumb drive in my other computer and moving the images from the thumb drive to it's external hard drive A long process when you can only move about 20 images at a time from iphoto.
I'm just trying to move a good bit of old photos out of iphoto on the Mace because I'm scared that the program or even my entire computer is going to crash and I'm going to have data loss.
What can I do about the "unable to create volume" message? And what's with the "file in use" error message when I try to move the images off a file folder on the desktop.
Is there a better way to move 1GB of photos all at once to the thumb drive?

Welcome to the Apple Discussions.
Seems to be two issues complicating things here:
I'm trying to export photos from iphoto to a 2 GB thumb drive. I keep getting the error message "unable to create volume" when I try to move anything but very small batches of photos over.
What format is that wee drive? Mostly there are FAT16 or FAT 32 and there is a limit to the number of objects they can have on the root of the drive. The workaround is to export to a Folder on the desktop and copy that over.
Which brings us to:
I tried to create a folder on my desktop for the photos but then when I try to move from there I get an error message telling me the photo "is in use" and can't be moved to the thumb drive.
You will sometimes get this message when you try to export two files +with the same name+ to a Folder. As you know your camera is well capable of producing many files called something like DSC_1234.jpeg. In iPhoto these will be in separate folders, so no problem. However, when you go to export them to the Folder on the desktop if iPhoto continues the export one will overwrite the error.
Solution: Give the Pics a title (Photos -> Batch Change) and a sequential number. Then when you export, in the export dialogue you have the option to use the Title as filename.
Regards
TD

InDesign cs6 crashes when exporting objects with drop shadows to interactive PDF

I am using the trial version of InDesign CS6 on a mac OSX 10.7.4 I need to export my document as an interactive PDF. I have found that the export works fine so long as none of the objects within my document have a drop shadow. However, if I add a drop shadow to any object (text, images, or video) InDesign will crash when I try to export. I am adding the drop shadow by selecting the object and then choosing Object > Effects > Drop Shadow. Is there another method I should be using to add the shadow if I want to export to an Interactive PDF?

Hi Peter, thanks for the response. Yes, I have tried creating a new blank project and adding one text object with a drop shadow and then exporting to Interactive PDF, and I experienced the same result. I tried replacing my preferences as you suggested and found that it did not have any affect.
I continued developing my InDesign document without using any drop shadows and began to experience the same type of crashing under two more circumstances. 1. When relinking assets in my Links panel. 2. When exporting to interactive PDF with interactive objects that are being clipped (I get a warning telling me I have clipped objects before I export; when I click export I experience the same crash.) I have tried exporting the same file to a print (non-interactive) PDF and experienced no crashing.
I thought I should mention that I am using a retina display mac book pro with 16GB RAM. Could my graphics cards or the configureation of my machine be causing my issue?
Thanks so much,

Character drops zeros when exported to Excel

I have a template that when exported to Excel from E-Business Suite, drops the leading zeros. We want those zeros to be there.
For example, Project Number 000400 is SEGMENT1 of PA_PROJECTS_ALL so when viewed in Word, it shows the full text string. When the user exports to Excel, it drops the three leading zeros and just displays 400.
Is there a way around this?
Thanks,
Rob

Use a special character called a non-breaking-space and that should resolve your issue. Put it before or after your xml field
Insert->Symbol->Special Characters Tab->Nonbreaking Space
or
Ctrl+Shift+SpaceIf this works, don't forget to give me some points. :-)
Ike Wiggins
http://bipublisher.blogspot.com

Dropping zeros when exported to CSV format

I formated in Numbers using 5 digit place holder and setting "hide seperator" and "show zeros" This looks perfect in Numbers but when I export to CSV (I want to import the mailing list to AddressBook) it drops the front zero. I tried formating a new column as text and pasting the list into it, but it turned into numerical format and dropped the zero again when exported to CSV. Any suggestions would be appreciated. I can't help but feel I am being stupid. This shouldn't be so difficult.

I did the following test:
1) I formatted a column as text and entered several cells worth of 5-digit zip codes that had leading zeros.
2) I formatted a column with a custom format of five digits, leading zeros, and no separator. I typed in a few numbers with less than five digits and they displayed with leading zeros. No surprise there.
3) I formatted a column as text and copy/pasted from column in (2) to this text-formatted column. I was actually surprised it kept the leading zeros because the underlying data (a bunch of 3 and 4 digit numbers) does not actually have them.
4) I exported this file as CSV.
5) I opened the CSV in TextEdit and the leading zeros were there in all three of these columns.
This all seems to be working as you would want it to. Am I doing something different than you?
To complete the test, I opened the CSV with Numbers and it dropped all the leading zeros upon import. But you are not re-importing it into Numbers so this last step wasn't really a fair test.

Volume level when exporting

Hi guys,
I have a question about the volume level when exporting a project to .mp3.
I seems that the volume level when exported is a lot lower then the volume level on the rest of my music i iTunes. When trying to enhance the volume level with 3rd party software the sound quality becomes rubish. I tried everything that I could think of but nothing seems to work.
Is there anyway to adjust the volume level when exporting to take care of this problem?

http://www.bulletsandbones.com/GB/GBFAQ.html#commercialcdvolume
(Let the page FULLY load. The link to your answer is at the top of your screen)

Sound drop out when exporting to Quicktime movie.

One track of three sound tracks drops out after a few seconds then reappears a few seconds later when exporting to QT Movie. The project functions perfectly when printing to video. Am using QT 7.1.3 FCE HD 3

Hi(Bonjour)!
Try to make an "audio-mixdown" of your final sequence
in timeline.
Michel Boissonneault
Thanks for the info. I managed to overcome the problem initially by copying onto miniDV then re-capturing and exporting the result., but Mix Down is much nicer.
However, prior to upgrading to FCE-HD, I am fairly certain I have made more complex projects with no problems. Now quite frequently I get a message suggesting I reduce the number of RT tracks, or increase the speed of my computer. Is there something in FCE HD that requires these modifications, or have I a rogue project.
Does anyone know what is the actual difference between High Medium & Low qualities with Audio & Video?
Thanks
Roy

Not rendering - Getting dropped frames when exporting to tape

I am trying to export my project to Mini DV tape. I have been successful before, but am continually getting dropped frames. I noticed that the sections that are getting dropped frames are showing that it is not rendered (red bar). I have tried rendering them several times, but still show the red bar. I am using a PowerMac G5, Dual 2 GHZ processor with 3GB RAM. The footage is on a Lacie Firewire 800 external hardrive and there is almost 200 GB of free space. I do get occasional dropped frames, but not as often as I am now.

Is there anything else I can do? When I get the Warning - Dropped frames, it suggests turning off "Unlimited RT", which I have and set to "Safe" because I was getting dropped frames. Will this affect the quality when exporting? I have set the Video Quality to "Dynamic" and Frame Rate "Full" and Record "Full Quality". Do any of these settings need to be changed? Lowering your compression data rate (I'm not sure what that is), Closing open sequences (which I've done), Lowering the preference for real-time audio tracks (how do I do that and again will it affect the quality?), Increasing the speed of your system and/or disk drives and/or network connection (Is there a way for me to do that?)

Walkman Volume drops to zero when i connect a headset

My walkman Volume drops to zero when i connect a headset. I can adjust the volume settings for media but it snaps right back to zero. When i disconnect the headphone the volume settings work again so i can listen to media like mp3. But i would like to use my headset. Any tips?

Hi
I believe this has something to do with "Smart Connect" app.
If you don't wanna check on a lot of settings, then clear the data of smart connect app ( settings > smart connect > clear data) and your phone should be working as supposed to, otherwise check on the settings and it's easy.
Run the smart connect app > select "Music on the go" or "Music at home" ( Or any other profile to check) >Select the edit option at the bottom then check the settings if you have set the volumes to minimum when you choose to connect your headsets.
If you find it confusing, just clear the data of app and see if it works for you.
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Text dropping when exporting to PDF

I'm working on an very large poster for a theatre company. The poster has an image, and uses the font Gotham for the text. When I export to PDF from InDesign 5.5, some of the text disappears. I used effects on the title, which disappears, but also some text at the same size/color as other text that does show up. It can't be a corrupt font issue because it's showing up correctly in most areas. Does anyone have any ideas what could be causing this?

I'm using Acrobat X. I've attached a cap of the InDesign poster, and what I get when exporting to PDF -- I lose the title, and "Directed by..." (which is the same type size/color as the playwright). Also, I have overprint preview checked for automatic (and tried all the other settings, too).

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.

Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

How to set color profile when exporting a RAW file version as a JPEG?

I import my raw files to Aperture and when exporting as a JPEG I want to specify a color profile of sRBG. I cannot see how to set the color profile for the export. Does anyone know how to do this?

When you go to export versions, edit the presets, and there is a drop down box that lets you select the profile.
I'd suggest picking up the Aperture book by Luna, Long, and Harrington. Lots of great info there.

Wrong aspect ratio or size when exporting Pal anamorph with ProRes codec!

Hi community,
I have a problem exporting a spot in the right format. The customer/the upload service provider needs PAL anamorph 16:9 in ProRes codec.
When I export my FULLHD spot to these setting, the aspect ratio/the spot size turns out wrong. When opened in QT Pro the size is 720x576, what is correct, but the anamorph size quotet in brackets reads different values, for example 1020x576 but never 1024x576, what would be correct.
The service providers online software refuses to work with these wrong nunmbers...!?
The same export settings with QT Animation codec is correct. Also when exporting the same composition with two export modules, the Animation codec is OK, the ProRes codec is wrong. No matter whether I export a PAL-format comp or stretch it while exporting the FullHD comp.
Working with After Effects CC.
Any ideas?

Don't resize the output but instead drop your full HD comp in a standard PAL widescreen comp, fit the HD comp horizontally and then render the new comp without using any resize controls.
Second option, Render your full HD comp to a frame based production master codec (prorez) and then use the Adobe Media Encoder and setup a PAL Widescreen Square Pixel preset. Here's my Pal Widescreen Prorez 422 HQ preset. It is what I use for all requests for Pal ProRez from my clients.

Dropping in volume when exporting

Similar Messages

Maybe you are looking for